# HG changeset patch # User Ethan Zonca # Date 2014-11-08 01:11:53 # Node ID 4ae23ddf6c3e46eac7d747814a594ce7145be726 # Parent 4f9e65f1e0dcb51094a6691748e89d57687ecef1 Add F0 CMSIS diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h b/libraries/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h @@ -0,0 +1,5555 @@ +/** + ****************************************************************************** + * @file stm32f0xx.h + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F0xx devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx + * @{ + */ + +#ifndef __STM32F0XX_H +#define __STM32F0XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32F0 device used in your + application + */ + +#if !defined (STM32F030) && !defined (STM32F031) && !defined (STM32F051) && !defined (STM32F072) && !defined (STM32F042) && !defined (STM32F091) + /* #define STM32F030 */ + /* #define STM32F031 */ + /* #define STM32F051 */ + /* #define STM32F072 */ + /* #define STM32F042 */ + /* #define STM32F091 */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +/* Old STM32F0XX definition, maintained for legacy purpose */ +#if defined(STM32F0XX) || defined(STM32F0XX_MD) + #define STM32F051 +#endif /* STM32F0XX */ + +/* Old STM32F0XX_LD definition, maintained for legacy purpose */ +#ifdef STM32F0XX_LD + #define STM32F031 +#endif /* STM32F0XX_LD */ + +/* Old STM32F0XX_HD definition, maintained for legacy purpose */ +#ifdef STM32F0XX_HD + #define STM32F072 +#endif /* STM32F0XX_HD */ + +/* Old STM32F030X6/X8 definition, maintained for legacy purpose */ +#if defined (STM32F030X8) || defined (STM32F030X6) + #define STM32F030 +#endif /* STM32F030X8 or STM32F030X6 */ + + +#if !defined (STM32F030) && !defined (STM32F031) && !defined (STM32F051) && !defined (STM32F072) && !defined (STM32F042) && !defined (STM32F091) + #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)" +#endif + +#if !defined USE_STDPERIPH_DRIVER +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif /* USE_STDPERIPH_DRIVER */ + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT ((uint16_t)0x5000) /*!< Time out for HSE start up */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) +#define HSI_STARTUP_TIMEOUT ((uint16_t)0x5000) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal High Speed oscillator in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI_VALUE */ + +#if !defined (HSI14_VALUE) +#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI14_VALUE */ + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE ((uint32_t)40000) /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* LSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief STM32F0xx Standard Peripheral Library version number V1.4.0 + */ +#define __STM32F0XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F0XX_STDPERIPH_VERSION_SUB1 (0x04) /*!< [23:16] sub1 version */ +#define __STM32F0XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F0XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F0XX_STDPERIPH_VERSION ((__STM32F0XX_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F0XX_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F0XX_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F0XX_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief STM32F0xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +#define __CM0_REV 0 /*!< Core Revision r0p0 */ +#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */ +#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/*!< Interrupt Number Definition */ +typedef enum IRQn +{ +/****** Cortex-M0 Processor Exceptions Numbers ******************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ + +#if defined (STM32F051) +/****** STM32F051 specific Interrupt Numbers *************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_IRQn = 4, /*!< RCC Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TS_IRQn = 8, /*!< Touch sense controller Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM6_DAC_IRQn = 17, /*!< TIM6 and DAC Interrupts */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + CEC_IRQn = 30 /*!< CEC Interrupt */ +#elif defined (STM32F031) +/****** STM32F031 specific Interrupt Numbers *************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_IRQn = 4, /*!< RCC Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + USART1_IRQn = 27 /*!< USART1 Interrupt */ +#elif defined (STM32F030) +/****** STM32F030 specific Interrupt Numbers *************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_IRQn = 4, /*!< RCC Interrupt */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupt */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28 /*!< USART2 Interrupt */ +#elif defined (STM32F072) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD and VDDIO2 supply comparator through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TSC_IRQn = 8, /*!< TSC Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_6_7_IRQn = 11, /*!< DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC1, COMP1 and COMP2 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM6_DAC_IRQn = 17, /*!< TIM6 and DAC Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 Interrupts */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + I2C2_IRQn = 24, /*!< I2C2 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + USART3_4_IRQn = 29, /*!< USART3 and USART4 Interrupts */ + CEC_CAN_IRQn = 30, /*!< CEC and CAN Interrupts */ + USB_IRQn = 31 /*!< USB Low Priority global Interrupt */ +#elif defined (STM32F042) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD and VDDIO2 supply comparator through EXTI Line detect Interrupt */ + RTC_IRQn = 2, /*!< RTC through EXTI Line Interrupt */ + FLASH_IRQn = 3, /*!< FLASH Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC and CRS Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TSC_IRQn = 8, /*!< TSC Interrupt */ + DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */ + DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4, Channel 5 Interrupts */ + ADC1_IRQn = 12, /*!< ADC1 Interrupts */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Interrupt */ + SPI1_IRQn = 25, /*!< SPI1 Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 Interrupt */ + USART1_IRQn = 27, /*!< USART1 Interrupt */ + USART2_IRQn = 28, /*!< USART2 Interrupt */ + CEC_CAN_IRQn = 30, /*!< CEC and CAN Interrupts */ + USB_IRQn = 31 /*!< USB Low Priority global Interrupt */ +#elif defined (STM32F091) + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_VDDIO2_IRQn = 1, /*!< PVD & VDDIO2 Interrupts through EXTI Lines 16 and 31 */ + RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */ + FLASH_IRQn = 3, /*!< FLASH global Interrupt */ + RCC_CRS_IRQn = 4, /*!< RCC & CRS Global Interrupts */ + EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */ + EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */ + EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */ + TSC_IRQn = 8, /*!< Touch Sensing Controller Interrupts */ + DMA1_Ch1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Ch2_3_DMA2_Ch1_2_IRQn = 10, /*!< DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 Interrupts */ + DMA1_Ch4_7_DMA2_Ch3_5_IRQn = 11, /*!< DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 Interrupts */ + ADC1_COMP_IRQn = 12, /*!< ADC, COMP1 and COMP2 Interrupts (EXTI Lines 21 and 22) */ + TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */ + TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 15, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 16, /*!< TIM3 global Interrupt */ + TIM6_DAC_IRQn = 17, /*!< TIM6 global and DAC channel underrun error Interrupts */ + TIM7_IRQn = 18, /*!< TIM7 global Interrupt */ + TIM14_IRQn = 19, /*!< TIM14 global Interrupt */ + TIM15_IRQn = 20, /*!< TIM15 global Interrupt */ + TIM16_IRQn = 21, /*!< TIM16 global Interrupt */ + TIM17_IRQn = 22, /*!< TIM17 global Interrupt */ + I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */ + I2C2_IRQn = 24, /*!< I2C2 Event Interrupt & EXTI Line24 Interrupt (I2C2 wakeup) */ + SPI1_IRQn = 25, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 26, /*!< SPI2 global Interrupt */ + USART1_IRQn = 27, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */ + USART2_IRQn = 28, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */ + USART3_8_IRQn = 29, /*!< USART3 to USART8 global Interrupts */ + CEC_CAN_IRQn = 30 /*!< CEC and CAN global Interrupts & EXTI Line27 Interrupt */ +#endif /* STM32F051 */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm0.h" +#include "system_stm32f0xx.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */ + __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */ + __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */ + __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */ + __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */ + __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */ + uint32_t RESERVED3; /*!< Reserved, 0x24 */ + __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */ + uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */ + __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +/** + * @brief HDMI-CEC + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x1C */ +} COMP_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ + uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4*/ + __IO uint32_t RMPCR; /*!< Remap control register, Address offset: 0xA8 */ +}DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*! exti[31] Interrupt */ +#define SYSCFG_ITLINE1_SR_VDDIO2 ((uint32_t)0x00000002) /*!< VDDIO2 -> exti[16] Interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_WAKEUP ((uint32_t)0x00000001) /*!< RTC WAKEUP -> exti[20] Interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_TSTAMP ((uint32_t)0x00000002) /*!< RTC Time Stamp -> exti[19] interrupt */ +#define SYSCFG_ITLINE2_SR_RTC_ALRA ((uint32_t)0x00000003) /*!< RTC Alarm -> exti[17] interrupt .... */ +#define SYSCFG_ITLINE3_SR_FLASH_ITF ((uint32_t)0x00000001) /*!< Flash ITF Interrupt */ +#define SYSCFG_ITLINE4_SR_CRS ((uint32_t)0x00000001) /*!< CRS interrupt */ +#define SYSCFG_ITLINE4_SR_CLK_CTRL ((uint32_t)0x00000002) /*!< CLK CTRL interrupt */ +#define SYSCFG_ITLINE5_SR_EXTI0 ((uint32_t)0x00000001) /*!< External Interrupt 0 */ +#define SYSCFG_ITLINE5_SR_EXTI1 ((uint32_t)0x00000002) /*!< External Interrupt 1 */ +#define SYSCFG_ITLINE6_SR_EXTI2 ((uint32_t)0x00000001) /*!< External Interrupt 2 */ +#define SYSCFG_ITLINE6_SR_EXTI3 ((uint32_t)0x00000002) /*!< External Interrupt 3 */ +#define SYSCFG_ITLINE7_SR_EXTI4 ((uint32_t)0x00000001) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI5 ((uint32_t)0x00000002) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI6 ((uint32_t)0x00000004) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI7 ((uint32_t)0x00000008) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI8 ((uint32_t)0x00000010) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI9 ((uint32_t)0x00000020) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI10 ((uint32_t)0x00000040) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI11 ((uint32_t)0x00000080) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI12 ((uint32_t)0x00000100) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI13 ((uint32_t)0x00000200) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI14 ((uint32_t)0x00000400) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE7_SR_EXTI15 ((uint32_t)0x00000800) /*!< External Interrupt 15 to 4 */ +#define SYSCFG_ITLINE8_SR_TSC_EOA ((uint32_t)0x00000001) /*!< Touch control EOA Interrupt */ +#define SYSCFG_ITLINE8_SR_TSC_MCE ((uint32_t)0x00000002) /*!< Touch control MCE Interrupt */ +#define SYSCFG_ITLINE9_SR_DMA1_CH1 ((uint32_t)0x00000001) /*!< DMA1 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH2 ((uint32_t)0x00000001) /*!< DMA1 Channel 2 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA1_CH3 ((uint32_t)0x00000002) /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA2_CH1 ((uint32_t)0x00000004) /*!< DMA2 Channel 1 Interrupt */ +#define SYSCFG_ITLINE10_SR_DMA2_CH2 ((uint32_t)0x00000008) /*!< DMA2 Channel 2 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH4 ((uint32_t)0x00000001) /*!< DMA1 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH5 ((uint32_t)0x00000002) /*!< DMA1 Channel 5 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH6 ((uint32_t)0x00000004) /*!< DMA1 Channel 6 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA1_CH7 ((uint32_t)0x00000008) /*!< DMA1 Channel 7 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH3 ((uint32_t)0x00000010) /*!< DMA2 Channel 3 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH4 ((uint32_t)0x00000020) /*!< DMA2 Channel 4 Interrupt */ +#define SYSCFG_ITLINE11_SR_DMA2_CH5 ((uint32_t)0x00000040) /*!< DMA2 Channel 5 Interrupt */ +#define SYSCFG_ITLINE12_SR_ADC ((uint32_t)0x00000001) /*!< ADC Interrupt */ +#define SYSCFG_ITLINE12_SR_COMP1 ((uint32_t)0x00000002) /*!< COMP1 Interrupt -> exti[21] */ +#define SYSCFG_ITLINE12_SR_COMP2 ((uint32_t)0x00000004) /*!< COMP2 Interrupt -> exti[22] */ +#define SYSCFG_ITLINE13_SR_TIM1_BRK ((uint32_t)0x00000001) /*!< TIM1 BRK Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_UPD ((uint32_t)0x00000002) /*!< TIM1 UPD Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_TRG ((uint32_t)0x00000004) /*!< TIM1 TRG Interrupt */ +#define SYSCFG_ITLINE13_SR_TIM1_CCU ((uint32_t)0x00000008) /*!< TIM1 CCU Interrupt */ +#define SYSCFG_ITLINE14_SR_TIM1_CC ((uint32_t)0x00000001) /*!< TIM1 CC Interrupt */ +#define SYSCFG_ITLINE15_SR_TIM2_GLB ((uint32_t)0x00000001) /*!< TIM2 GLB Interrupt */ +#define SYSCFG_ITLINE16_SR_TIM3_GLB ((uint32_t)0x00000001) /*!< TIM3 GLB Interrupt */ +#define SYSCFG_ITLINE17_SR_DAC ((uint32_t)0x00000001) /*!< DAC Interrupt */ +#define SYSCFG_ITLINE17_SR_TIM6_GLB ((uint32_t)0x00000002) /*!< TIM6 GLB Interrupt */ +#define SYSCFG_ITLINE18_SR_TIM7_GLB ((uint32_t)0x00000001) /*!< TIM7 GLB Interrupt */ +#define SYSCFG_ITLINE19_SR_TIM14_GLB ((uint32_t)0x00000001) /*!< TIM14 GLB Interrupt */ +#define SYSCFG_ITLINE20_SR_TIM15_GLB ((uint32_t)0x00000001) /*!< TIM15 GLB Interrupt */ +#define SYSCFG_ITLINE21_SR_TIM16_GLB ((uint32_t)0x00000001) /*!< TIM16 GLB Interrupt */ +#define SYSCFG_ITLINE22_SR_TIM17_GLB ((uint32_t)0x00000001) /*!< TIM17 GLB Interrupt */ +#define SYSCFG_ITLINE23_SR_I2C1_GLB ((uint32_t)0x00000001) /*!< I2C1 GLB Interrupt -> exti[23] */ +#define SYSCFG_ITLINE24_SR_I2C2_GLB ((uint32_t)0x00000001) /*!< I2C2 GLB Interrupt */ +#define SYSCFG_ITLINE25_SR_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Interrupt */ +#define SYSCFG_ITLINE26_SR_SPI2 ((uint32_t)0x00000001) /*!< SPI2 Interrupt */ +#define SYSCFG_ITLINE27_SR_USART1_GLB ((uint32_t)0x00000001) /*!< USART1 GLB Interrupt -> exti[25] */ +#define SYSCFG_ITLINE28_SR_USART2_GLB ((uint32_t)0x00000001) /*!< USART2 GLB Interrupt -> exti[26] */ +#define SYSCFG_ITLINE29_SR_USART3_GLB ((uint32_t)0x00000001) /*!< USART3 GLB Interrupt -> exti[28] */ +#define SYSCFG_ITLINE29_SR_USART4_GLB ((uint32_t)0x00000002) /*!< USART4 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART5_GLB ((uint32_t)0x00000004) /*!< USART5 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART6_GLB ((uint32_t)0x00000008) /*!< USART6 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART7_GLB ((uint32_t)0x00000010) /*!< USART7 GLB Interrupt */ +#define SYSCFG_ITLINE29_SR_USART8_GLB ((uint32_t)0x00000020) /*!< USART8 GLB Interrupt */ +#define SYSCFG_ITLINE30_SR_CAN ((uint32_t)0x00000001) /*!< CAN Interrupt */ +#define SYSCFG_ITLINE30_SR_CEC ((uint32_t)0x00000002) /*!< CEC Interrupt */ + +/******************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint16_t)0x0001) /*!
© COPYRIGHT 2014 STMicroelectronics
+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F0XX_H +#define __SYSTEM_STM32F0XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F0xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F0xx_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F0XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f030.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f030.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f030.s @@ -0,0 +1,301 @@ +/** + ****************************************************************************** + * @file startup_stm32f030.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F030 Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word 0 + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word 0 + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word 0 + .word TIM3_IRQHandler + .word 0 + .word 0 + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word 0 + .word 0 + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f031.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f031.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f031.s @@ -0,0 +1,296 @@ +/** + ****************************************************************************** + * @file startup_stm32f031.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F031 Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word 0 + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word 0 + .word 0 + .word TIM14_IRQHandler + .word 0 + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word 0 + .word SPI1_IRQHandler + .word 0 + .word USART1_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + \ No newline at end of file diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f042.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f042.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f042.s @@ -0,0 +1,310 @@ +/** + ****************************************************************************** + * @file startup_stm32f042.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F042 Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_VDDIO2_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_CRS_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TSC_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word 0 + .word 0 + .word TIM14_IRQHandler + .word 0 + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word 0 + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word CEC_CAN_IRQHandler + .word USB_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak CEC_CAN_IRQHandler + .thumb_set CEC_CAN_IRQHandler,Default_Handler + + + .weak USB_IRQHandler + .thumb_set USB_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f051.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f051.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f051.s @@ -0,0 +1,316 @@ +/** + ****************************************************************************** + * @file startup_stm32f051.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F051 Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TS_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word 0 + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word CEC_IRQHandler + .word 0 + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TS_IRQHandler + .thumb_set TS_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f072.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f072.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f072.s @@ -0,0 +1,325 @@ +/** + ****************************************************************************** + * @file startup_stm32f072.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F072 Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_VDDIO2_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_CRS_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TSC_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_6_7_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word TIM7_IRQHandler + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_4_IRQHandler + .word CEC_CAN_IRQHandler + .word USB_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_6_7_IRQHandler + .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_4_IRQHandler + .thumb_set USART3_4_IRQHandler,Default_Handler + + .weak CEC_CAN_IRQHandler + .thumb_set CEC_CAN_IRQHandler,Default_Handler + + .weak USB_IRQHandler + .thumb_set USB_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f091.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f091.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f091.s @@ -0,0 +1,321 @@ +/** + ****************************************************************************** + * @file startup_stm32f091.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F091 Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_VDDIO2_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_CRS_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TSC_IRQHandler + .word DMA1_Ch1_IRQHandler + .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler + .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word TIM7_IRQHandler + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_8_IRQHandler + .word CEC_CAN_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak DMA1_Ch1_IRQHandler + .thumb_set DMA1_Ch1_IRQHandler,Default_Handler + + .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler + .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler + + .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler + .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_8_IRQHandler + .thumb_set USART3_8_IRQHandler,Default_Handler + + .weak CEC_CAN_IRQHandler + .thumb_set CEC_CAN_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f0xx.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f0xx.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f0xx.s @@ -0,0 +1,314 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F0xx Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TS_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word 0 + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word CEC_IRQHandler + .word 0 + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TS_IRQHandler + .thumb_set TS_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f0xx_ld.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f0xx_ld.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/TrueSTUDIO/startup_stm32f0xx_ld.s @@ -0,0 +1,294 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx_ld.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F031 devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word 0 + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word 0 + .word 0 + .word TIM14_IRQHandler + .word 0 + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word 0 + .word SPI1_IRQHandler + .word 0 + .word USART1_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f030.s @@ -0,0 +1,272 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f030.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F030 devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD 0 ; Reserved + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD 0 ; Reserved + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD 0 ; Reserved + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + + +WWDG_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM3_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f031.s @@ -0,0 +1,267 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f031.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F031 devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD 0 ; Reserved + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM14_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f042.s @@ -0,0 +1,282 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f042.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F042 Devices vector table for +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_CRS_IRQHandler ; RCC and CRS + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4, Channel 5 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_CAN_IRQHandler ; CEC and CAN + DCD USB_IRQHandler ; USB + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_VDDIO2_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_CRS_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT CEC_CAN_IRQHandler [WEAK] + EXPORT USB_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_VDDIO2_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_CRS_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TSC_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM14_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +CEC_CAN_IRQHandler +USB_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f051.s @@ -0,0 +1,285 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f051.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F051 devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TS_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_IRQHandler ; CEC + DCD 0 ; Reserved + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TS_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_COMP_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TS_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_COMP_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM6_DAC_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +CEC_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f072.s @@ -0,0 +1,292 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f072.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F072 Devices vector table for +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_CRS_IRQHandler ; RCC and CRS + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD TIM7_IRQHandler ; TIM7 + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_4_IRQHandler ; USART3 and USART4 + DCD CEC_CAN_IRQHandler ; CEC and CAN + DCD USB_IRQHandler ; USB + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_VDDIO2_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_CRS_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_6_7_IRQHandler [WEAK] + EXPORT ADC1_COMP_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_4_IRQHandler [WEAK] + EXPORT CEC_CAN_IRQHandler [WEAK] + EXPORT USB_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_VDDIO2_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_CRS_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TSC_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_6_7_IRQHandler +ADC1_COMP_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_4_IRQHandler +CEC_CAN_IRQHandler +USB_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f091.s @@ -0,0 +1,289 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f091.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F091 Devices vector table for +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_CRS_IRQHandler ; RCC and CRS + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 + DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD TIM7_IRQHandler ; TIM7 + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8 + DCD CEC_CAN_IRQHandler ; CEC and CAN + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_VDDIO2_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_CRS_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT DMA1_Ch1_IRQHandler [WEAK] + EXPORT DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler [WEAK] + EXPORT DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler [WEAK] + EXPORT ADC1_COMP_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_8_IRQHandler [WEAK] + EXPORT CEC_CAN_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_VDDIO2_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_CRS_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TSC_IRQHandler +DMA1_Ch1_IRQHandler +DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler +DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler +ADC1_COMP_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_8_IRQHandler +CEC_CAN_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f0xx.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f0xx.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f0xx.s @@ -0,0 +1,285 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f0xx.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F051 devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TS_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_IRQHandler ; CEC + DCD 0 ; Reserved + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT TS_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_COMP_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C2_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +TS_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_COMP_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM6_DAC_IRQHandler +TIM14_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +CEC_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f0xx_ld.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f0xx_ld.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/arm/startup_stm32f0xx_ld.s @@ -0,0 +1,267 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f0xx_ld.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F031 devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the system clock +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD 0 ; Reserved + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + + + + LDR R0, =__initial_sp ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart + +;; SYSCFG clock enable + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_1_IRQHandler [WEAK] + EXPORT EXTI2_3_IRQHandler [WEAK] + EXPORT EXTI4_15_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_5_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_1_IRQHandler +EXTI2_3_IRQHandler +EXTI4_15_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_3_IRQHandler +DMA1_Channel4_5_IRQHandler +ADC1_IRQHandler +TIM1_BRK_UP_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM14_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +I2C1_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f030.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f030.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f030.s @@ -0,0 +1,315 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F030 Devices vector table for RIDE7 toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word 0 + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word 0 + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word 0 + .word TIM3_IRQHandler + .word 0 + .word 0 + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F0xx devices. */ + + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f031.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f031.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f031.s @@ -0,0 +1,308 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F031 Devices vector table for RIDE7 toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word 0 + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word 0 + .word 0 + .word TIM14_IRQHandler + .word 0 + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word 0 + .word SPI1_IRQHandler + .word 0 + .word USART1_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F0xx devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f042.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f042.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f042.s @@ -0,0 +1,323 @@ +/** + ****************************************************************************** + * @file startup_stm32f042.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F042 Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_VDDIO2_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_CRS_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TSC_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word 0 + .word 0 + .word TIM14_IRQHandler + .word 0 + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word 0 + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word CEC_CAN_IRQHandler + .word USB_IRQHandler + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F0xx devices. */ + + + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak CEC_CAN_IRQHandler + .thumb_set CEC_CAN_IRQHandler,Default_Handler + + + .weak USB_IRQHandler + .thumb_set USB_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f051.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f051.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f051.s @@ -0,0 +1,328 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F051 Devices vector table for RIDE7 toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TS_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word 0 + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word CEC_IRQHandler + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F0xx devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TS_IRQHandler + .thumb_set TS_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f072.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f072.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f072.s @@ -0,0 +1,337 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F072 Devices vector table for RIDE7 toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + + .word WWDG_IRQHandler + .word PVD_VDDIO2_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_CRS_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TSC_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_6_7_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word TIM7_IRQHandler + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_4_IRQHandler + .word CEC_CAN_IRQHandler + .word USB_IRQHandler + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F0xx devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_6_7_IRQHandler + .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_4_IRQHandler + .thumb_set USART3_4_IRQHandler,Default_Handler + + .weak CEC_CAN_IRQHandler + .thumb_set CEC_CAN_IRQHandler,Default_Handler + + .weak USB_IRQHandler + .thumb_set USB_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f0xx.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f0xx.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7/startup_stm32f0xx.s @@ -0,0 +1,325 @@ +/** + ****************************************************************************** + * @file startup_stm32f0xx.s + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief STM32F0xx Devices vector table for RIDE7 toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the system clock + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/*Check if boot space corresponds to test memory*/ + + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + BNE ApplicationStart + + /*SYSCFG clock enable*/ + + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +/*Set CFGR1 register with flash memory remap at address 0*/ + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] + +ApplicationStart: +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_1_IRQHandler + .word EXTI2_3_IRQHandler + .word EXTI4_15_IRQHandler + .word TS_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_3_IRQHandler + .word DMA1_Channel4_5_IRQHandler + .word ADC1_COMP_IRQHandler + .word TIM1_BRK_UP_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM6_DAC_IRQHandler + .word 0 + .word TIM14_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word I2C1_IRQHandler + .word I2C2_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word 0 + .word CEC_IRQHandler + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F0xx devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TS_IRQHandler + .thumb_set TS_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_3_IRQHandler + .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_5_IRQHandler + .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f030.s @@ -0,0 +1,323 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f030.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F030 devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address +;* - Configure the system clock +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD 0 ; Reserved + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD 0 ; Reserved + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD 0 ; Reserved + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =sfe(CSTACK) ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart +;; SYSCFG clock enable + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_3_IRQHandler + B DMA1_Channel2_3_IRQHandler + + + PUBWEAK DMA1_Channel4_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_5_IRQHandler + B DMA1_Channel4_5_IRQHandler + + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + + PUBWEAK TIM15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM15_IRQHandler + B TIM15_IRQHandler + + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + + PUBWEAK I2C2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_IRQHandler + B I2C2_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f031.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f031.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f031.s @@ -0,0 +1,311 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f031.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F031 devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address +;* - Configure the system clock +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD 0 ; Reserved + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =sfe(CSTACK) ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart +;; SYSCFG clock enable + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_3_IRQHandler + B DMA1_Channel2_3_IRQHandler + + + PUBWEAK DMA1_Channel4_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_5_IRQHandler + B DMA1_Channel4_5_IRQHandler + + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f042.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f042.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f042.s @@ -0,0 +1,341 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f042.s +;* Author : MCD Appl&ication Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F042 Devices Devices vector table for +;* EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_CRS_IRQHandler ; RCC and CRS + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_CAN_IRQHandler ; CEC and CAN + DCD USB_IRQHandler ; USB + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =sfe(CSTACK) ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart +;; SYSCFG clock enable + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK PVD_VDDIO2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_VDDIO2_IRQHandler + B PVD_VDDIO2_IRQHandler + + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_CRS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_CRS_IRQHandler + B RCC_CRS_IRQHandler + + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_3_IRQHandler + B DMA1_Channel2_3_IRQHandler + + + PUBWEAK DMA1_Channel4_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_5_IRQHandler + B DMA1_Channel4_5_IRQHandler + + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + + PUBWEAK CEC_CAN_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CEC_CAN_IRQHandler + B CEC_CAN_IRQHandler + + PUBWEAK USB_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USB_IRQHandler + B USB_IRQHandler + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f051.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f051.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f051.s @@ -0,0 +1,356 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f051.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F051 devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address +;* - Configure the system clock +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TS_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_IRQHandler ; CEC + DCD 0 ; Reserved + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =sfe(CSTACK) ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart +;; SYSCFG clock enable + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + + PUBWEAK TS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TS_IRQHandler + B TS_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_3_IRQHandler + B DMA1_Channel2_3_IRQHandler + + + PUBWEAK DMA1_Channel4_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_5_IRQHandler + B DMA1_Channel4_5_IRQHandler + + + PUBWEAK ADC1_COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_COMP_IRQHandler + B ADC1_COMP_IRQHandler + + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + + PUBWEAK TIM15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM15_IRQHandler + B TIM15_IRQHandler + + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + + PUBWEAK I2C2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_IRQHandler + B I2C2_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + + PUBWEAK CEC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CEC_IRQHandler + B CEC_IRQHandler + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f072.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f072.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f072.s @@ -0,0 +1,369 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f072.s +;* Author : MCD Appl&ication Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F072 Devices Devices vector table for +;* EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_CRS_IRQHandler ; RCC and CRS + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD TIM7_IRQHandler ; TIM7 + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_4_IRQHandler ; USART3 and USART4 + DCD CEC_CAN_IRQHandler ; CEC and CAN + DCD USB_IRQHandler ; USB + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =sfe(CSTACK) ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart +;; SYSCFG clock enable + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK PVD_VDDIO2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_VDDIO2_IRQHandler + B PVD_VDDIO2_IRQHandler + + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_CRS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_CRS_IRQHandler + B RCC_CRS_IRQHandler + + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_3_IRQHandler + B DMA1_Channel2_3_IRQHandler + + + PUBWEAK DMA1_Channel4_5_6_7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_5_6_7_IRQHandler + B DMA1_Channel4_5_6_7_IRQHandler + + + PUBWEAK ADC1_COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_COMP_IRQHandler + B ADC1_COMP_IRQHandler + + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + + PUBWEAK TIM15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM15_IRQHandler + B TIM15_IRQHandler + + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + + PUBWEAK I2C2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_IRQHandler + B I2C2_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + + PUBWEAK USART3_4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART3_4_IRQHandler + B USART3_4_IRQHandler + + + PUBWEAK CEC_CAN_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CEC_CAN_IRQHandler + B CEC_CAN_IRQHandler + + PUBWEAK USB_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USB_IRQHandler + B USB_IRQHandler + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f091.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f091.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f091.s @@ -0,0 +1,319 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f091.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F091xc devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == __iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address, +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +;* +;*

© COPYRIGHT(c) 2014 STMicroelectronics

+;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_VDDIO2_IRQHandler ; PVD and VDDIO2 through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_CRS_IRQHandler ; RCC and CRS + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TSC_IRQHandler ; TS + DCD DMA1_Ch1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler ; DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 + DCD DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler ; DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD TIM7_IRQHandler ; TIM7 + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_8_IRQHandler ; USART3, USART4, USART5, USART6, USART7, USART8 + DCD CEC_CAN_IRQHandler ; CEC and CAN + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_VDDIO2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_VDDIO2_IRQHandler + B PVD_VDDIO2_IRQHandler + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_CRS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_CRS_IRQHandler + B RCC_CRS_IRQHandler + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK DMA1_Ch1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Ch1_IRQHandler + B DMA1_Ch1_IRQHandler + + PUBWEAK DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler + B DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler + + PUBWEAK DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler + B DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler + + PUBWEAK ADC1_COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_COMP_IRQHandler + B ADC1_COMP_IRQHandler + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + PUBWEAK TIM15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM15_IRQHandler + B TIM15_IRQHandler + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + PUBWEAK I2C2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_IRQHandler + B I2C2_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK USART3_8_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART3_8_IRQHandler + B USART3_8_IRQHandler + + PUBWEAK CEC_CAN_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CEC_CAN_IRQHandler + B CEC_CAN_IRQHandler + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f0xx.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f0xx.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f0xx.s @@ -0,0 +1,356 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f0xx.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F051 devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address +;* - Configure the system clock +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD TS_IRQHandler ; TS + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_COMP_IRQHandler ; ADC1, COMP1 and COMP2 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD I2C2_IRQHandler ; I2C2 + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD CEC_IRQHandler ; CEC + DCD 0 ; Reserved + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =sfe(CSTACK) ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart +;; SYSCFG clock enable + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + + PUBWEAK TS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TS_IRQHandler + B TS_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_3_IRQHandler + B DMA1_Channel2_3_IRQHandler + + + PUBWEAK DMA1_Channel4_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_5_IRQHandler + B DMA1_Channel4_5_IRQHandler + + + PUBWEAK ADC1_COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_COMP_IRQHandler + B ADC1_COMP_IRQHandler + + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + + PUBWEAK TIM15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM15_IRQHandler + B TIM15_IRQHandler + + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + + PUBWEAK I2C2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_IRQHandler + B I2C2_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + + PUBWEAK CEC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CEC_IRQHandler + B CEC_IRQHandler + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f0xx_ld.s b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f0xx_ld.s new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/iar/startup_stm32f0xx_ld.s @@ -0,0 +1,311 @@ +;******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32f0xx_ld.s +;* Author : MCD Application Team +;* Version : V1.4.0 +;* Date : 24-July-2014 +;* Description : STM32F031 devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address +;* - Configure the system clock +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M0 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD RTC_IRQHandler ; RTC through EXTI Line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_1_IRQHandler ; EXTI Line 0 and 1 + DCD EXTI2_3_IRQHandler ; EXTI Line 2 and 3 + DCD EXTI4_15_IRQHandler ; EXTI Line 4 to 15 + DCD 0 ; Reserved + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_3_IRQHandler ; DMA1 Channel 2 and Channel 3 + DCD DMA1_Channel4_5_IRQHandler ; DMA1 Channel 4 and Channel 5 + DCD ADC1_IRQHandler ; ADC1 + DCD TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD I2C1_IRQHandler ; I2C1 + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =sfe(CSTACK) ; set stack pointer + MSR MSP, R0 + +;;Check if boot space corresponds to test memory + LDR R0,=0x00000004 + LDR R1, [R0] + LSRS R1, R1, #24 + LDR R2,=0x1F + CMP R1, R2 + + BNE ApplicationStart +;; SYSCFG clock enable + LDR R0,=0x40021018 + LDR R1,=0x00000001 + STR R1, [R0] + +;; Set CFGR1 register with flash memory remap at address 0 + + LDR R0,=0x40010000 + LDR R1,=0x00000000 + STR R1, [R0] +ApplicationStart + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + + PUBWEAK RTC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_IRQHandler + B RTC_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + + PUBWEAK EXTI0_1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_1_IRQHandler + B EXTI0_1_IRQHandler + + + PUBWEAK EXTI2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_3_IRQHandler + B EXTI2_3_IRQHandler + + + PUBWEAK EXTI4_15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_15_IRQHandler + B EXTI4_15_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_3_IRQHandler + B DMA1_Channel2_3_IRQHandler + + + PUBWEAK DMA1_Channel4_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_5_IRQHandler + B DMA1_Channel4_5_IRQHandler + + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + + PUBWEAK TIM1_BRK_UP_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_UP_TRG_COM_IRQHandler + B TIM1_BRK_UP_TRG_COM_IRQHandler + + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + + PUBWEAK I2C1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_IRQHandler + B I2C1_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Device/ST/STM32F0xx/Source/Templates/system_stm32f0xx.c @@ -0,0 +1,358 @@ +/** + ****************************************************************************** + * @file system_stm32f0xx.c + * @author MCD Application Team + * @version V1.4.0 + * @date 24-July-2014 + * @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File. + * This file contains the system clock configuration for STM32F0xx devices, + * and is generated by the clock configuration tool + * STM32F0xx_Clock_Configuration_V1.0.0.xls + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * and Divider factors, AHB/APBx prescalers and Flash settings), + * depending on the configuration made in the clock xls tool. + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f0xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz Range) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8MHz, refer to "HSE_VALUE" define + * in "stm32f0xx.h" file. When HSE is used as system clock source, directly or + * through PLL, and you are using different crystal you have to adapt the HSE + * value to your own configuration. + * + * 5. This file configures the system clock as follows: + *============================================================================= + * System Clock Configuration + *============================================================================= + * System Clock source | PLL(HSE) + *----------------------------------------------------------------------------- + * SYSCLK | 48000000 Hz + *----------------------------------------------------------------------------- + * HCLK | 48000000 Hz + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * HSE Frequency | 8000000 Hz + *----------------------------------------------------------------------------- + * PLL MUL | 6 + *----------------------------------------------------------------------------- + * VDD | 3.3 V + *----------------------------------------------------------------------------- + * Flash Latency | 1 WS + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2014 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f0xx_system + * @{ + */ + +/** @addtogroup STM32F0xx_System_Private_Includes + * @{ + */ + +#include "stm32f0xx.h" + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Defines + * @{ + */ +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Variables + * @{ + */ +uint32_t SystemCoreClock = 48000000; +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +/** + * @} + */ + +/** @addtogroup STM32F0xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + +#if defined (STM32F031) || defined (STM32F072) || defined (STM32F042) + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE and MCOSEL[2:0] bits */ + RCC->CFGR &= (uint32_t)0xF8FFB80C; +#else + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE, MCOSEL[2:0], MCOPRE[2:0] and PLLNODIV bits */ + RCC->CFGR &= (uint32_t)0x08FFB80C; +#endif /* STM32F031*/ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + RCC->CFGR &= (uint32_t)0xFFC0FFFF; + + /* Reset PREDIV1[3:0] bits */ + RCC->CFGR2 &= (uint32_t)0xFFFFFFF0; + + /* Reset USARTSW[1:0], I2CSW, CECSW and ADCSW bits */ + RCC->CFGR3 &= (uint32_t)0xFFFFFEAC; + + /* Reset HSI14 bit */ + RCC->CR2 &= (uint32_t)0xFFFFFFFE; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + + /* Configure the System clock frequency, AHB/APBx prescalers and Flash settings */ + SetSysClock(); +} + +/** + * @brief Update SystemCoreClock according to Clock Register Values + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f0xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f0xx.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, prediv1factor = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + break; + default: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, AHB/APBx prescalers and Flash + * settings. + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +static void SetSysClock(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK configuration ----------------------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer and set Flash Latency */ + FLASH->ACR = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE_DIV1; + + /* PLL configuration = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL6); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/libraries/CMSIS/Include/arm_common_tables.h b/libraries/CMSIS/Include/arm_common_tables.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/arm_common_tables.h @@ -0,0 +1,93 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2013 ARM Limited. All rights reserved. +* +* $Date: 17. January 2013 +* $Revision: V1.4.1 +* +* Project: CMSIS DSP Library +* Title: arm_common_tables.h +* +* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_COMMON_TABLES_H +#define _ARM_COMMON_TABLES_H + +#include "arm_math.h" + +extern const uint16_t armBitRevTable[1024]; +extern const q15_t armRecipTableQ15[64]; +extern const q31_t armRecipTableQ31[64]; +extern const q31_t realCoefAQ31[1024]; +extern const q31_t realCoefBQ31[1024]; +extern const float32_t twiddleCoef_16[32]; +extern const float32_t twiddleCoef_32[64]; +extern const float32_t twiddleCoef_64[128]; +extern const float32_t twiddleCoef_128[256]; +extern const float32_t twiddleCoef_256[512]; +extern const float32_t twiddleCoef_512[1024]; +extern const float32_t twiddleCoef_1024[2048]; +extern const float32_t twiddleCoef_2048[4096]; +extern const float32_t twiddleCoef_4096[8192]; +#define twiddleCoef twiddleCoef_4096 +extern const q31_t twiddleCoefQ31[6144]; +extern const q15_t twiddleCoefQ15[6144]; +extern const float32_t twiddleCoef_rfft_32[32]; +extern const float32_t twiddleCoef_rfft_64[64]; +extern const float32_t twiddleCoef_rfft_128[128]; +extern const float32_t twiddleCoef_rfft_256[256]; +extern const float32_t twiddleCoef_rfft_512[512]; +extern const float32_t twiddleCoef_rfft_1024[1024]; +extern const float32_t twiddleCoef_rfft_2048[2048]; +extern const float32_t twiddleCoef_rfft_4096[4096]; + + +#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 ) +#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 ) +#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 ) +#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 ) +#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 ) +#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 ) +#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800) +#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808) +#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032) + +extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH]; +extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH]; + +#endif /* ARM_COMMON_TABLES_H */ diff --git a/libraries/CMSIS/Include/arm_const_structs.h b/libraries/CMSIS/Include/arm_const_structs.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/arm_const_structs.h @@ -0,0 +1,85 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2013 ARM Limited. All rights reserved. +* +* $Date: 17. January 2013 +* $Revision: V1.4.1 +* +* Project: CMSIS DSP Library +* Title: arm_const_structs.h +* +* Description: This file has constant structs that are initialized for +* user convenience. For example, some can be given as +* arguments to the arm_cfft_f32() function. +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#ifndef _ARM_CONST_STRUCTS_H +#define _ARM_CONST_STRUCTS_H + +#include "arm_math.h" +#include "arm_common_tables.h" + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len16 = { + 16, twiddleCoef_16, armBitRevIndexTable16, ARMBITREVINDEXTABLE__16_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len32 = { + 32, twiddleCoef_32, armBitRevIndexTable32, ARMBITREVINDEXTABLE__32_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len64 = { + 64, twiddleCoef_64, armBitRevIndexTable64, ARMBITREVINDEXTABLE__64_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len128 = { + 128, twiddleCoef_128, armBitRevIndexTable128, ARMBITREVINDEXTABLE_128_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len256 = { + 256, twiddleCoef_256, armBitRevIndexTable256, ARMBITREVINDEXTABLE_256_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len512 = { + 512, twiddleCoef_512, armBitRevIndexTable512, ARMBITREVINDEXTABLE_512_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024 = { + 1024, twiddleCoef_1024, armBitRevIndexTable1024, ARMBITREVINDEXTABLE1024_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048 = { + 2048, twiddleCoef_2048, armBitRevIndexTable2048, ARMBITREVINDEXTABLE2048_TABLE_LENGTH + }; + + const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096 = { + 4096, twiddleCoef_4096, armBitRevIndexTable4096, ARMBITREVINDEXTABLE4096_TABLE_LENGTH + }; + +#endif diff --git a/libraries/CMSIS/Include/arm_math.h b/libraries/CMSIS/Include/arm_math.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/arm_math.h @@ -0,0 +1,7306 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2013 ARM Limited. All rights reserved. +* +* $Date: 17. January 2013 +* $Revision: V1.4.1 +* +* Project: CMSIS DSP Library +* Title: arm_math.h +* +* Description: Public header file for CMSIS DSP Library +* +* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. + * -------------------------------------------------------------------- */ + +/** + \mainpage CMSIS DSP Software Library + * + * Introduction + * + * This user manual describes the CMSIS DSP software library, + * a suite of common signal processing functions for use on Cortex-M processor based devices. + * + * The library is divided into a number of functions each covering a specific category: + * - Basic math functions + * - Fast math functions + * - Complex math functions + * - Filters + * - Matrix functions + * - Transforms + * - Motor control functions + * - Statistical functions + * - Support functions + * - Interpolation functions + * + * The library has separate functions for operating on 8-bit integers, 16-bit integers, + * 32-bit integer and 32-bit floating-point values. + * + * Using the Library + * + * The library installer contains prebuilt versions of the libraries in the Lib folder. + * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4) + * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4) + * - arm_cortexM4l_math.lib (Little endian on Cortex-M4) + * - arm_cortexM4b_math.lib (Big endian on Cortex-M4) + * - arm_cortexM3l_math.lib (Little endian on Cortex-M3) + * - arm_cortexM3b_math.lib (Big endian on Cortex-M3) + * - arm_cortexM0l_math.lib (Little endian on Cortex-M0) + * - arm_cortexM0b_math.lib (Big endian on Cortex-M3) + * + * The library functions are declared in the public file arm_math.h which is placed in the Include folder. + * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single + * public header file arm_math.h for Cortex-M4/M3/M0 with little endian and big endian. Same header file will be used for floating point unit(FPU) variants. + * Define the appropriate pre processor MACRO ARM_MATH_CM4 or ARM_MATH_CM3 or + * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application. + * + * Examples + * + * The library ships with a number of examples which demonstrate how to use the library functions. + * + * Toolchain Support + * + * The library has been developed and tested with MDK-ARM version 4.60. + * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly. + * + * Building the Library + * + * The library installer contains project files to re build libraries on MDK Tool chain in the CMSIS\\DSP_Lib\\Source\\ARM folder. + * - arm_cortexM0b_math.uvproj + * - arm_cortexM0l_math.uvproj + * - arm_cortexM3b_math.uvproj + * - arm_cortexM3l_math.uvproj + * - arm_cortexM4b_math.uvproj + * - arm_cortexM4l_math.uvproj + * - arm_cortexM4bf_math.uvproj + * - arm_cortexM4lf_math.uvproj + * + * + * The project can be built by opening the appropriate project in MDK-ARM 4.60 chain and defining the optional pre processor MACROs detailed above. + * + * Pre-processor Macros + * + * Each library project have differant pre-processor macros. + * + * - UNALIGNED_SUPPORT_DISABLE: + * + * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access + * + * - ARM_MATH_BIG_ENDIAN: + * + * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets. + * + * - ARM_MATH_MATRIX_CHECK: + * + * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices + * + * - ARM_MATH_ROUNDING: + * + * Define macro ARM_MATH_ROUNDING for rounding on support functions + * + * - ARM_MATH_CMx: + * + * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target + * and ARM_MATH_CM0 for building library on cortex-M0 target, ARM_MATH_CM0PLUS for building library on cortex-M0+ target. + * + * - __FPU_PRESENT: + * + * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries + * + * Copyright Notice + * + * Copyright (C) 2010-2013 ARM Limited. All rights reserved. + */ + + +/** + * @defgroup groupMath Basic Math Functions + */ + +/** + * @defgroup groupFastMath Fast Math Functions + * This set of functions provides a fast approximation to sine, cosine, and square root. + * As compared to most of the other functions in the CMSIS math library, the fast math functions + * operate on individual values and not arrays. + * There are separate functions for Q15, Q31, and floating-point data. + * + */ + +/** + * @defgroup groupCmplxMath Complex Math Functions + * This set of functions operates on complex data vectors. + * The data in the complex arrays is stored in an interleaved fashion + * (real, imag, real, imag, ...). + * In the API functions, the number of samples in a complex array refers + * to the number of complex values; the array contains twice this number of + * real values. + */ + +/** + * @defgroup groupFilters Filtering Functions + */ + +/** + * @defgroup groupMatrix Matrix Functions + * + * This set of functions provides basic matrix math operations. + * The functions operate on matrix data structures. For example, + * the type + * definition for the floating-point matrix structure is shown + * below: + * 
+ *     typedef struct
+ *     {
+ *       uint16_t numRows;     // number of rows of the matrix.
+ *       uint16_t numCols;     // number of columns of the matrix.
+ *       float32_t *pData;     // points to the data of the matrix.
+ *     } arm_matrix_instance_f32;
+ *
+ * There are similar definitions for Q15 and Q31 data types. + * + * The structure specifies the size of the matrix and then points to + * an array of data. The array is of size numRows X numCols + * and the values are arranged in row order. That is, the + * matrix element (i, j) is stored at: + * 
+ *     pData[i*numCols + j]
+ *
+ * + * \par Init Functions + * There is an associated initialization function for each type of matrix + * data structure. + * The initialization function sets the values of the internal structure fields. + * Refer to the function arm_mat_init_f32(), arm_mat_init_q31() + * and arm_mat_init_q15() for floating-point, Q31 and Q15 types, respectively. + * + * \par + * Use of the initialization function is optional. However, if initialization function is used + * then the instance structure cannot be placed into a const data section. + * To place the instance structure in a const data + * section, manually initialize the data structure. For example: + * 
+ * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
+ *
+ * where nRows specifies the number of rows, nColumns + * specifies the number of columns, and pData points to the + * data array. + * + * \par Size Checking + * By default all of the matrix functions perform size checking on the input and + * output matrices. For example, the matrix addition function verifies that the + * two input matrices and the output matrix all have the same number of rows and + * columns. If the size check fails the functions return: + * 
+ *     ARM_MATH_SIZE_MISMATCH
+ *
+ * Otherwise the functions return + * 
+ *     ARM_MATH_SUCCESS
+ *
+ * There is some overhead associated with this matrix size checking. + * The matrix size checking is enabled via the \#define + * 
+ *     ARM_MATH_MATRIX_CHECK
+ *
+ * within the library project settings. By default this macro is defined + * and size checking is enabled. By changing the project settings and + * undefining this macro size checking is eliminated and the functions + * run a bit faster. With size checking disabled the functions always + * return ARM_MATH_SUCCESS. + */ + +/** + * @defgroup groupTransforms Transform Functions + */ + +/** + * @defgroup groupController Controller Functions + */ + +/** + * @defgroup groupStats Statistics Functions + */ +/** + * @defgroup groupSupport Support Functions + */ + +/** + * @defgroup groupInterpolation Interpolation Functions + * These functions perform 1- and 2-dimensional interpolation of data. + * Linear interpolation is used for 1-dimensional data and + * bilinear interpolation is used for 2-dimensional data. + */ + +/** + * @defgroup groupExamples Examples + */ +#ifndef _ARM_MATH_H +#define _ARM_MATH_H + +#define __CMSIS_GENERIC /* disable NVIC and Systick functions */ + +#if defined (ARM_MATH_CM4) +#include "core_cm4.h" +#elif defined (ARM_MATH_CM3) +#include "core_cm3.h" +#elif defined (ARM_MATH_CM0) +#include "core_cm0.h" +#define ARM_MATH_CM0_FAMILY +#elif defined (ARM_MATH_CM0PLUS) +#include "core_cm0plus.h" +#define ARM_MATH_CM0_FAMILY +#else +#include "ARMCM4.h" +#warning "Define either ARM_MATH_CM4 OR ARM_MATH_CM3...By Default building on ARM_MATH_CM4....." +#endif + +#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */ +#include "string.h" +#include "math.h" +#ifdef __cplusplus +extern "C" +{ +#endif + + + /** + * @brief Macros required for reciprocal calculation in Normalized LMS + */ + +#define DELTA_Q31 (0x100) +#define DELTA_Q15 0x5 +#define INDEX_MASK 0x0000003F +#ifndef PI +#define PI 3.14159265358979f +#endif + + /** + * @brief Macros required for SINE and COSINE Fast math approximations + */ + +#define TABLE_SIZE 256 +#define TABLE_SPACING_Q31 0x800000 +#define TABLE_SPACING_Q15 0x80 + + /** + * @brief Macros required for SINE and COSINE Controller functions + */ + /* 1.31(q31) Fixed value of 2/360 */ + /* -1 to +1 is divided into 360 values so total spacing is (2/360) */ +#define INPUT_SPACING 0xB60B61 + + /** + * @brief Macro for Unaligned Support + */ +#ifndef UNALIGNED_SUPPORT_DISABLE + #define ALIGN4 +#else + #if defined (__GNUC__) + #define ALIGN4 __attribute__((aligned(4))) + #else + #define ALIGN4 __align(4) + #endif +#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ + + /** + * @brief Error status returned by some functions in the library. + */ + + typedef enum + { + ARM_MATH_SUCCESS = 0, /**< No error */ + ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */ + ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */ + ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */ + ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */ + ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */ + ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */ + } arm_status; + + /** + * @brief 8-bit fractional data type in 1.7 format. + */ + typedef int8_t q7_t; + + /** + * @brief 16-bit fractional data type in 1.15 format. + */ + typedef int16_t q15_t; + + /** + * @brief 32-bit fractional data type in 1.31 format. + */ + typedef int32_t q31_t; + + /** + * @brief 64-bit fractional data type in 1.63 format. + */ + typedef int64_t q63_t; + + /** + * @brief 32-bit floating-point type definition. + */ + typedef float float32_t; + + /** + * @brief 64-bit floating-point type definition. + */ + typedef double float64_t; + + /** + * @brief definition to read/write two 16 bit values. + */ +#if defined __CC_ARM +#define __SIMD32_TYPE int32_t __packed +#define CMSIS_UNUSED __attribute__((unused)) +#elif defined __ICCARM__ +#define CMSIS_UNUSED +#define __SIMD32_TYPE int32_t __packed +#elif defined __GNUC__ +#define __SIMD32_TYPE int32_t +#define CMSIS_UNUSED __attribute__((unused)) +#else +#error Unknown compiler +#endif + +#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr)) +#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr)) + +#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr)) + +#define __SIMD64(addr) (*(int64_t **) & (addr)) + +#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) + /** + * @brief definition to pack two 16 bit values. + */ +#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \ + (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) ) +#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \ + (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) ) + +#endif + + + /** + * @brief definition to pack four 8 bit values. + */ +#ifndef ARM_MATH_BIG_ENDIAN + +#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v3) << 24) & (int32_t)0xFF000000) ) +#else + +#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \ + (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \ + (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \ + (((int32_t)(v0) << 24) & (int32_t)0xFF000000) ) + +#endif + + + /** + * @brief Clips Q63 to Q31 values. + */ + static __INLINE q31_t clip_q63_to_q31( + q63_t x) + { + return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? + ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x; + } + + /** + * @brief Clips Q63 to Q15 values. + */ + static __INLINE q15_t clip_q63_to_q15( + q63_t x) + { + return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? + ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15); + } + + /** + * @brief Clips Q31 to Q7 values. + */ + static __INLINE q7_t clip_q31_to_q7( + q31_t x) + { + return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ? + ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x; + } + + /** + * @brief Clips Q31 to Q15 values. + */ + static __INLINE q15_t clip_q31_to_q15( + q31_t x) + { + return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ? + ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x; + } + + /** + * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format. + */ + + static __INLINE q63_t mult32x64( + q63_t x, + q31_t y) + { + return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) + + (((q63_t) (x >> 32) * y))); + } + + +#if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM ) +#define __CLZ __clz +#endif + +#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) ||(defined (__GNUC__)) || defined (__TASKING__) ) + + static __INLINE uint32_t __CLZ( + q31_t data); + + + static __INLINE uint32_t __CLZ( + q31_t data) + { + uint32_t count = 0; + uint32_t mask = 0x80000000; + + while((data & mask) == 0) + { + count += 1u; + mask = mask >> 1u; + } + + return (count); + + } + +#endif + + /** + * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type. + */ + + static __INLINE uint32_t arm_recip_q31( + q31_t in, + q31_t * dst, + q31_t * pRecipTable) + { + + uint32_t out, tempVal; + uint32_t index, i; + uint32_t signBits; + + if(in > 0) + { + signBits = __CLZ(in) - 1; + } + else + { + signBits = __CLZ(-in) - 1; + } + + /* Convert input sample to 1.31 format */ + in = in << signBits; + + /* calculation of index for initial approximated Val */ + index = (uint32_t) (in >> 24u); + index = (index & INDEX_MASK); + + /* 1.31 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0u; i < 2u; i++) + { + tempVal = (q31_t) (((q63_t) in * out) >> 31u); + tempVal = 0x7FFFFFFF - tempVal; + /* 1.31 with exp 1 */ + //out = (q31_t) (((q63_t) out * tempVal) >> 30u); + out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u); + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1u); + + } + + /** + * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type. + */ + static __INLINE uint32_t arm_recip_q15( + q15_t in, + q15_t * dst, + q15_t * pRecipTable) + { + + uint32_t out = 0, tempVal = 0; + uint32_t index = 0, i = 0; + uint32_t signBits = 0; + + if(in > 0) + { + signBits = __CLZ(in) - 17; + } + else + { + signBits = __CLZ(-in) - 17; + } + + /* Convert input sample to 1.15 format */ + in = in << signBits; + + /* calculation of index for initial approximated Val */ + index = in >> 8; + index = (index & INDEX_MASK); + + /* 1.15 with exp 1 */ + out = pRecipTable[index]; + + /* calculation of reciprocal value */ + /* running approximation for two iterations */ + for (i = 0; i < 2; i++) + { + tempVal = (q15_t) (((q31_t) in * out) >> 15); + tempVal = 0x7FFF - tempVal; + /* 1.15 with exp 1 */ + out = (q15_t) (((q31_t) out * tempVal) >> 14); + } + + /* write output */ + *dst = out; + + /* return num of signbits of out = 1/in value */ + return (signBits + 1); + + } + + + /* + * @brief C custom defined intrinisic function for only M0 processors + */ +#if defined(ARM_MATH_CM0_FAMILY) + + static __INLINE q31_t __SSAT( + q31_t x, + uint32_t y) + { + int32_t posMax, negMin; + uint32_t i; + + posMax = 1; + for (i = 0; i < (y - 1); i++) + { + posMax = posMax * 2; + } + + if(x > 0) + { + posMax = (posMax - 1); + + if(x > posMax) + { + x = posMax; + } + } + else + { + negMin = -posMax; + + if(x < negMin) + { + x = negMin; + } + } + return (x); + + + } + +#endif /* end of ARM_MATH_CM0_FAMILY */ + + + + /* + * @brief C custom defined intrinsic function for M3 and M0 processors + */ +#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) + + /* + * @brief C custom defined QADD8 for M3 and M0 processors + */ + static __INLINE q31_t __QADD8( + q31_t x, + q31_t y) + { + + q31_t sum; + q7_t r, s, t, u; + + r = (q7_t) x; + s = (q7_t) y; + + r = __SSAT((q31_t) (r + s), 8); + s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8); + t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8); + u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8); + + sum = + (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) | + (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF); + + return sum; + + } + + /* + * @brief C custom defined QSUB8 for M3 and M0 processors + */ + static __INLINE q31_t __QSUB8( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s, t, u; + + r = (q7_t) x; + s = (q7_t) y; + + r = __SSAT((r - s), 8); + s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8; + t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16; + u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24; + + sum = + (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r & + 0x000000FF); + + return sum; + } + + /* + * @brief C custom defined QADD16 for M3 and M0 processors + */ + + /* + * @brief C custom defined QADD16 for M3 and M0 processors + */ + static __INLINE q31_t __QADD16( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = __SSAT(r + s, 16); + s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16; + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + + } + + /* + * @brief C custom defined SHADD16 for M3 and M0 processors + */ + static __INLINE q31_t __SHADD16( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) + (s >> 1)); + s = ((q31_t) ((x >> 17) + (y >> 17))) << 16; + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + + } + + /* + * @brief C custom defined QSUB16 for M3 and M0 processors + */ + static __INLINE q31_t __QSUB16( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = __SSAT(r - s, 16); + s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16; + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + } + + /* + * @brief C custom defined SHSUB16 for M3 and M0 processors + */ + static __INLINE q31_t __SHSUB16( + q31_t x, + q31_t y) + { + + q31_t diff; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) - (s >> 1)); + s = (((x >> 17) - (y >> 17)) << 16); + + diff = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return diff; + } + + /* + * @brief C custom defined QASX for M3 and M0 processors + */ + static __INLINE q31_t __QASX( + q31_t x, + q31_t y) + { + + q31_t sum = 0; + + sum = + ((sum + + clip_q31_to_q15((q31_t) ((short) (x >> 16) + (short) y))) << 16) + + clip_q31_to_q15((q31_t) ((short) x - (short) (y >> 16))); + + return sum; + } + + /* + * @brief C custom defined SHASX for M3 and M0 processors + */ + static __INLINE q31_t __SHASX( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) - (y >> 17)); + s = (((x >> 17) + (s >> 1)) << 16); + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + } + + + /* + * @brief C custom defined QSAX for M3 and M0 processors + */ + static __INLINE q31_t __QSAX( + q31_t x, + q31_t y) + { + + q31_t sum = 0; + + sum = + ((sum + + clip_q31_to_q15((q31_t) ((short) (x >> 16) - (short) y))) << 16) + + clip_q31_to_q15((q31_t) ((short) x + (short) (y >> 16))); + + return sum; + } + + /* + * @brief C custom defined SHSAX for M3 and M0 processors + */ + static __INLINE q31_t __SHSAX( + q31_t x, + q31_t y) + { + + q31_t sum; + q31_t r, s; + + r = (short) x; + s = (short) y; + + r = ((r >> 1) + (y >> 17)); + s = (((x >> 17) - (s >> 1)) << 16); + + sum = (s & 0xFFFF0000) | (r & 0x0000FFFF); + + return sum; + } + + /* + * @brief C custom defined SMUSDX for M3 and M0 processors + */ + static __INLINE q31_t __SMUSDX( + q31_t x, + q31_t y) + { + + return ((q31_t) (((short) x * (short) (y >> 16)) - + ((short) (x >> 16) * (short) y))); + } + + /* + * @brief C custom defined SMUADX for M3 and M0 processors + */ + static __INLINE q31_t __SMUADX( + q31_t x, + q31_t y) + { + + return ((q31_t) (((short) x * (short) (y >> 16)) + + ((short) (x >> 16) * (short) y))); + } + + /* + * @brief C custom defined QADD for M3 and M0 processors + */ + static __INLINE q31_t __QADD( + q31_t x, + q31_t y) + { + return clip_q63_to_q31((q63_t) x + y); + } + + /* + * @brief C custom defined QSUB for M3 and M0 processors + */ + static __INLINE q31_t __QSUB( + q31_t x, + q31_t y) + { + return clip_q63_to_q31((q63_t) x - y); + } + + /* + * @brief C custom defined SMLAD for M3 and M0 processors + */ + static __INLINE q31_t __SMLAD( + q31_t x, + q31_t y, + q31_t sum) + { + + return (sum + ((short) (x >> 16) * (short) (y >> 16)) + + ((short) x * (short) y)); + } + + /* + * @brief C custom defined SMLADX for M3 and M0 processors + */ + static __INLINE q31_t __SMLADX( + q31_t x, + q31_t y, + q31_t sum) + { + + return (sum + ((short) (x >> 16) * (short) (y)) + + ((short) x * (short) (y >> 16))); + } + + /* + * @brief C custom defined SMLSDX for M3 and M0 processors + */ + static __INLINE q31_t __SMLSDX( + q31_t x, + q31_t y, + q31_t sum) + { + + return (sum - ((short) (x >> 16) * (short) (y)) + + ((short) x * (short) (y >> 16))); + } + + /* + * @brief C custom defined SMLALD for M3 and M0 processors + */ + static __INLINE q63_t __SMLALD( + q31_t x, + q31_t y, + q63_t sum) + { + + return (sum + ((short) (x >> 16) * (short) (y >> 16)) + + ((short) x * (short) y)); + } + + /* + * @brief C custom defined SMLALDX for M3 and M0 processors + */ + static __INLINE q63_t __SMLALDX( + q31_t x, + q31_t y, + q63_t sum) + { + + return (sum + ((short) (x >> 16) * (short) y)) + + ((short) x * (short) (y >> 16)); + } + + /* + * @brief C custom defined SMUAD for M3 and M0 processors + */ + static __INLINE q31_t __SMUAD( + q31_t x, + q31_t y) + { + + return (((x >> 16) * (y >> 16)) + + (((x << 16) >> 16) * ((y << 16) >> 16))); + } + + /* + * @brief C custom defined SMUSD for M3 and M0 processors + */ + static __INLINE q31_t __SMUSD( + q31_t x, + q31_t y) + { + + return (-((x >> 16) * (y >> 16)) + + (((x << 16) >> 16) * ((y << 16) >> 16))); + } + + + /* + * @brief C custom defined SXTB16 for M3 and M0 processors + */ + static __INLINE q31_t __SXTB16( + q31_t x) + { + + return ((((x << 24) >> 24) & 0x0000FFFF) | + (((x << 8) >> 8) & 0xFFFF0000)); + } + + +#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */ + + + /** + * @brief Instance structure for the Q7 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q7; + + /** + * @brief Instance structure for the Q15 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + } arm_fir_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of filter coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + } arm_fir_instance_f32; + + + /** + * @brief Processing function for the Q7 FIR filter. + * @param[in] *S points to an instance of the Q7 FIR filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_q7( + const arm_fir_instance_q7 * S, + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q7 FIR filter. + * @param[in,out] *S points to an instance of the Q7 FIR structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed. + * @return none + */ + void arm_fir_init_q7( + arm_fir_instance_q7 * S, + uint16_t numTaps, + q7_t * pCoeffs, + q7_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 FIR filter. + * @param[in] *S points to an instance of the Q15 FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_q15( + const arm_fir_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q15 FIR filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_fast_q15( + const arm_fir_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q15 FIR filter. + * @param[in,out] *S points to an instance of the Q15 FIR filter structure. + * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if + * numTaps is not a supported value. + */ + + arm_status arm_fir_init_q15( + arm_fir_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR filter. + * @param[in] *S points to an instance of the Q31 FIR filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_q31( + const arm_fir_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q31 FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_fast_q31( + const arm_fir_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 FIR filter. + * @param[in,out] *S points to an instance of the Q31 FIR structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return none. + */ + void arm_fir_init_q31( + arm_fir_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the floating-point FIR filter. + * @param[in] *S points to an instance of the floating-point FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_f32( + const arm_fir_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point FIR filter. + * @param[in,out] *S points to an instance of the floating-point FIR filter structure. + * @param[in] numTaps Number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of samples that are processed at a time. + * @return none. + */ + void arm_fir_init_f32( + arm_fir_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q15 Biquad cascade filter. + */ + typedef struct + { + int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + + } arm_biquad_casd_df1_inst_q15; + + + /** + * @brief Instance structure for the Q31 Biquad cascade filter. + */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ + + } arm_biquad_casd_df1_inst_q31; + + /** + * @brief Instance structure for the floating-point Biquad cascade filter. + */ + typedef struct + { + uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ + float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ + + + } arm_biquad_casd_df1_inst_f32; + + + + /** + * @brief Processing function for the Q15 Biquad cascade filter. + * @param[in] *S points to an instance of the Q15 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_q15( + const arm_biquad_casd_df1_inst_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q15 Biquad cascade filter. + * @param[in,out] *S points to an instance of the Q15 Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format + * @return none + */ + + void arm_biquad_cascade_df1_init_q15( + arm_biquad_casd_df1_inst_q15 * S, + uint8_t numStages, + q15_t * pCoeffs, + q15_t * pState, + int8_t postShift); + + + /** + * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q15 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_fast_q15( + const arm_biquad_casd_df1_inst_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 Biquad cascade filter + * @param[in] *S points to an instance of the Q31 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_q31( + const arm_biquad_casd_df1_inst_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q31 Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_fast_q31( + const arm_biquad_casd_df1_inst_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 Biquad cascade filter. + * @param[in,out] *S points to an instance of the Q31 Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format + * @return none + */ + + void arm_biquad_cascade_df1_init_q31( + arm_biquad_casd_df1_inst_q31 * S, + uint8_t numStages, + q31_t * pCoeffs, + q31_t * pState, + int8_t postShift); + + /** + * @brief Processing function for the floating-point Biquad cascade filter. + * @param[in] *S points to an instance of the floating-point Biquad cascade structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df1_f32( + const arm_biquad_casd_df1_inst_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point Biquad cascade filter. + * @param[in,out] *S points to an instance of the floating-point Biquad cascade structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @return none + */ + + void arm_biquad_cascade_df1_init_f32( + arm_biquad_casd_df1_inst_f32 * S, + uint8_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + /** + * @brief Instance structure for the floating-point matrix structure. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + float32_t *pData; /**< points to the data of the matrix. */ + } arm_matrix_instance_f32; + + /** + * @brief Instance structure for the Q15 matrix structure. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q15_t *pData; /**< points to the data of the matrix. */ + + } arm_matrix_instance_q15; + + /** + * @brief Instance structure for the Q31 matrix structure. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows of the matrix. */ + uint16_t numCols; /**< number of columns of the matrix. */ + q31_t *pData; /**< points to the data of the matrix. */ + + } arm_matrix_instance_q31; + + + + /** + * @brief Floating-point matrix addition. + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_add_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix addition. + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_add_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix addition. + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_add_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix transpose. + * @param[in] *pSrc points to the input matrix + * @param[out] *pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_trans_f32( + const arm_matrix_instance_f32 * pSrc, + arm_matrix_instance_f32 * pDst); + + + /** + * @brief Q15 matrix transpose. + * @param[in] *pSrc points to the input matrix + * @param[out] *pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_trans_q15( + const arm_matrix_instance_q15 * pSrc, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix transpose. + * @param[in] *pSrc points to the input matrix + * @param[out] *pDst points to the output matrix + * @return The function returns either ARM_MATH_SIZE_MISMATCH + * or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_trans_q31( + const arm_matrix_instance_q31 * pSrc, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix multiplication + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix multiplication + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @param[in] *pState points to the array for storing intermediate results + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst, + q15_t * pState); + + /** + * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @param[in] *pState points to the array for storing intermediate results + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_fast_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst, + q15_t * pState); + + /** + * @brief Q31 matrix multiplication + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + /** + * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_mult_fast_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Floating-point matrix subtraction + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_sub_f32( + const arm_matrix_instance_f32 * pSrcA, + const arm_matrix_instance_f32 * pSrcB, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix subtraction + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_sub_q15( + const arm_matrix_instance_q15 * pSrcA, + const arm_matrix_instance_q15 * pSrcB, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix subtraction + * @param[in] *pSrcA points to the first input matrix structure + * @param[in] *pSrcB points to the second input matrix structure + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_sub_q31( + const arm_matrix_instance_q31 * pSrcA, + const arm_matrix_instance_q31 * pSrcB, + arm_matrix_instance_q31 * pDst); + + /** + * @brief Floating-point matrix scaling. + * @param[in] *pSrc points to the input matrix + * @param[in] scale scale factor + * @param[out] *pDst points to the output matrix + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_scale_f32( + const arm_matrix_instance_f32 * pSrc, + float32_t scale, + arm_matrix_instance_f32 * pDst); + + /** + * @brief Q15 matrix scaling. + * @param[in] *pSrc points to input matrix + * @param[in] scaleFract fractional portion of the scale factor + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to output matrix + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_scale_q15( + const arm_matrix_instance_q15 * pSrc, + q15_t scaleFract, + int32_t shift, + arm_matrix_instance_q15 * pDst); + + /** + * @brief Q31 matrix scaling. + * @param[in] *pSrc points to input matrix + * @param[in] scaleFract fractional portion of the scale factor + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to output matrix structure + * @return The function returns either + * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking. + */ + + arm_status arm_mat_scale_q31( + const arm_matrix_instance_q31 * pSrc, + q31_t scaleFract, + int32_t shift, + arm_matrix_instance_q31 * pDst); + + + /** + * @brief Q31 matrix initialization. + * @param[in,out] *S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] *pData points to the matrix data array. + * @return none + */ + + void arm_mat_init_q31( + arm_matrix_instance_q31 * S, + uint16_t nRows, + uint16_t nColumns, + q31_t * pData); + + /** + * @brief Q15 matrix initialization. + * @param[in,out] *S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] *pData points to the matrix data array. + * @return none + */ + + void arm_mat_init_q15( + arm_matrix_instance_q15 * S, + uint16_t nRows, + uint16_t nColumns, + q15_t * pData); + + /** + * @brief Floating-point matrix initialization. + * @param[in,out] *S points to an instance of the floating-point matrix structure. + * @param[in] nRows number of rows in the matrix. + * @param[in] nColumns number of columns in the matrix. + * @param[in] *pData points to the matrix data array. + * @return none + */ + + void arm_mat_init_f32( + arm_matrix_instance_f32 * S, + uint16_t nRows, + uint16_t nColumns, + float32_t * pData); + + + + /** + * @brief Instance structure for the Q15 PID Control. + */ + typedef struct + { + q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ +#ifdef ARM_MATH_CM0_FAMILY + q15_t A1; + q15_t A2; +#else + q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/ +#endif + q15_t state[3]; /**< The state array of length 3. */ + q15_t Kp; /**< The proportional gain. */ + q15_t Ki; /**< The integral gain. */ + q15_t Kd; /**< The derivative gain. */ + } arm_pid_instance_q15; + + /** + * @brief Instance structure for the Q31 PID Control. + */ + typedef struct + { + q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + q31_t A2; /**< The derived gain, A2 = Kd . */ + q31_t state[3]; /**< The state array of length 3. */ + q31_t Kp; /**< The proportional gain. */ + q31_t Ki; /**< The integral gain. */ + q31_t Kd; /**< The derivative gain. */ + + } arm_pid_instance_q31; + + /** + * @brief Instance structure for the floating-point PID Control. + */ + typedef struct + { + float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ + float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ + float32_t A2; /**< The derived gain, A2 = Kd . */ + float32_t state[3]; /**< The state array of length 3. */ + float32_t Kp; /**< The proportional gain. */ + float32_t Ki; /**< The integral gain. */ + float32_t Kd; /**< The derivative gain. */ + } arm_pid_instance_f32; + + + + /** + * @brief Initialization function for the floating-point PID Control. + * @param[in,out] *S points to an instance of the PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + * @return none. + */ + void arm_pid_init_f32( + arm_pid_instance_f32 * S, + int32_t resetStateFlag); + + /** + * @brief Reset function for the floating-point PID Control. + * @param[in,out] *S is an instance of the floating-point PID Control structure + * @return none + */ + void arm_pid_reset_f32( + arm_pid_instance_f32 * S); + + + /** + * @brief Initialization function for the Q31 PID Control. + * @param[in,out] *S points to an instance of the Q15 PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + * @return none. + */ + void arm_pid_init_q31( + arm_pid_instance_q31 * S, + int32_t resetStateFlag); + + + /** + * @brief Reset function for the Q31 PID Control. + * @param[in,out] *S points to an instance of the Q31 PID Control structure + * @return none + */ + + void arm_pid_reset_q31( + arm_pid_instance_q31 * S); + + /** + * @brief Initialization function for the Q15 PID Control. + * @param[in,out] *S points to an instance of the Q15 PID structure. + * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. + * @return none. + */ + void arm_pid_init_q15( + arm_pid_instance_q15 * S, + int32_t resetStateFlag); + + /** + * @brief Reset function for the Q15 PID Control. + * @param[in,out] *S points to an instance of the q15 PID Control structure + * @return none + */ + void arm_pid_reset_q15( + arm_pid_instance_q15 * S); + + + /** + * @brief Instance structure for the floating-point Linear Interpolate function. + */ + typedef struct + { + uint32_t nValues; /**< nValues */ + float32_t x1; /**< x1 */ + float32_t xSpacing; /**< xSpacing */ + float32_t *pYData; /**< pointer to the table of Y values */ + } arm_linear_interp_instance_f32; + + /** + * @brief Instance structure for the floating-point bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + float32_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_f32; + + /** + * @brief Instance structure for the Q31 bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q31_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q31; + + /** + * @brief Instance structure for the Q15 bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q15_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q15; + + /** + * @brief Instance structure for the Q15 bilinear interpolation function. + */ + + typedef struct + { + uint16_t numRows; /**< number of rows in the data table. */ + uint16_t numCols; /**< number of columns in the data table. */ + q7_t *pData; /**< points to the data table. */ + } arm_bilinear_interp_instance_q7; + + + /** + * @brief Q7 vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Floating-point vector multiplication. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_mult_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + + + + + + /** + * @brief Instance structure for the Q15 CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix2_instance_q15; + + arm_status arm_cfft_radix2_init_q15( + arm_cfft_radix2_instance_q15 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + void arm_cfft_radix2_q15( + const arm_cfft_radix2_instance_q15 * S, + q15_t * pSrc); + + + + /** + * @brief Instance structure for the Q15 CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q15; + + arm_status arm_cfft_radix4_init_q15( + arm_cfft_radix4_instance_q15 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + void arm_cfft_radix4_q15( + const arm_cfft_radix4_instance_q15 * S, + q15_t * pSrc); + + /** + * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q31_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix2_instance_q31; + + arm_status arm_cfft_radix2_init_q31( + arm_cfft_radix2_instance_q31 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + void arm_cfft_radix2_q31( + const arm_cfft_radix2_instance_q31 * S, + q31_t * pSrc); + + /** + * @brief Instance structure for the Q31 CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + } arm_cfft_radix4_instance_q31; + + + void arm_cfft_radix4_q31( + const arm_cfft_radix4_instance_q31 * S, + q31_t * pSrc); + + arm_status arm_cfft_radix4_init_q31( + arm_cfft_radix4_instance_q31 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Instance structure for the floating-point CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + float32_t onebyfftLen; /**< value of 1/fftLen. */ + } arm_cfft_radix2_instance_f32; + +/* Deprecated */ + arm_status arm_cfft_radix2_init_f32( + arm_cfft_radix2_instance_f32 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + +/* Deprecated */ + void arm_cfft_radix2_f32( + const arm_cfft_radix2_instance_f32 * S, + float32_t * pSrc); + + /** + * @brief Instance structure for the floating-point CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ + uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ + float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ + float32_t onebyfftLen; /**< value of 1/fftLen. */ + } arm_cfft_radix4_instance_f32; + +/* Deprecated */ + arm_status arm_cfft_radix4_init_f32( + arm_cfft_radix4_instance_f32 * S, + uint16_t fftLen, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + +/* Deprecated */ + void arm_cfft_radix4_f32( + const arm_cfft_radix4_instance_f32 * S, + float32_t * pSrc); + + /** + * @brief Instance structure for the floating-point CFFT/CIFFT function. + */ + + typedef struct + { + uint16_t fftLen; /**< length of the FFT. */ + const float32_t *pTwiddle; /**< points to the Twiddle factor table. */ + const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ + uint16_t bitRevLength; /**< bit reversal table length. */ + } arm_cfft_instance_f32; + + void arm_cfft_f32( + const arm_cfft_instance_f32 * S, + float32_t * p1, + uint8_t ifftFlag, + uint8_t bitReverseFlag); + + /** + * @brief Instance structure for the Q15 RFFT/RIFFT function. + */ + + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint32_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q15; + + arm_status arm_rfft_init_q15( + arm_rfft_instance_q15 * S, + arm_cfft_radix4_instance_q15 * S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + void arm_rfft_q15( + const arm_rfft_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst); + + /** + * @brief Instance structure for the Q31 RFFT/RIFFT function. + */ + + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint32_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_q31; + + arm_status arm_rfft_init_q31( + arm_rfft_instance_q31 * S, + arm_cfft_radix4_instance_q31 * S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + void arm_rfft_q31( + const arm_rfft_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst); + + /** + * @brief Instance structure for the floating-point RFFT/RIFFT function. + */ + + typedef struct + { + uint32_t fftLenReal; /**< length of the real FFT. */ + uint16_t fftLenBy2; /**< length of the complex FFT. */ + uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ + uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ + uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ + float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ + float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_rfft_instance_f32; + + arm_status arm_rfft_init_f32( + arm_rfft_instance_f32 * S, + arm_cfft_radix4_instance_f32 * S_CFFT, + uint32_t fftLenReal, + uint32_t ifftFlagR, + uint32_t bitReverseFlag); + + void arm_rfft_f32( + const arm_rfft_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst); + + /** + * @brief Instance structure for the floating-point RFFT/RIFFT function. + */ + +typedef struct + { + arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */ + uint16_t fftLenRFFT; /**< length of the real sequence */ + float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */ + } arm_rfft_fast_instance_f32 ; + +arm_status arm_rfft_fast_init_f32 ( + arm_rfft_fast_instance_f32 * S, + uint16_t fftLen); + +void arm_rfft_fast_f32( + arm_rfft_fast_instance_f32 * S, + float32_t * p, float32_t * pOut, + uint8_t ifftFlag); + + /** + * @brief Instance structure for the floating-point DCT4/IDCT4 function. + */ + + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + float32_t normalize; /**< normalizing factor. */ + float32_t *pTwiddle; /**< points to the twiddle factor table. */ + float32_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_f32; + + /** + * @brief Initialization function for the floating-point DCT4/IDCT4. + * @param[in,out] *S points to an instance of floating-point DCT4/IDCT4 structure. + * @param[in] *S_RFFT points to an instance of floating-point RFFT/RIFFT structure. + * @param[in] *S_CFFT points to an instance of floating-point CFFT/CIFFT structure. + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length. + */ + + arm_status arm_dct4_init_f32( + arm_dct4_instance_f32 * S, + arm_rfft_instance_f32 * S_RFFT, + arm_cfft_radix4_instance_f32 * S_CFFT, + uint16_t N, + uint16_t Nby2, + float32_t normalize); + + /** + * @brief Processing function for the floating-point DCT4/IDCT4. + * @param[in] *S points to an instance of the floating-point DCT4/IDCT4 structure. + * @param[in] *pState points to state buffer. + * @param[in,out] *pInlineBuffer points to the in-place input and output buffer. + * @return none. + */ + + void arm_dct4_f32( + const arm_dct4_instance_f32 * S, + float32_t * pState, + float32_t * pInlineBuffer); + + /** + * @brief Instance structure for the Q31 DCT4/IDCT4 function. + */ + + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q31_t normalize; /**< normalizing factor. */ + q31_t *pTwiddle; /**< points to the twiddle factor table. */ + q31_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q31; + + /** + * @brief Initialization function for the Q31 DCT4/IDCT4. + * @param[in,out] *S points to an instance of Q31 DCT4/IDCT4 structure. + * @param[in] *S_RFFT points to an instance of Q31 RFFT/RIFFT structure + * @param[in] *S_CFFT points to an instance of Q31 CFFT/CIFFT structure + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + */ + + arm_status arm_dct4_init_q31( + arm_dct4_instance_q31 * S, + arm_rfft_instance_q31 * S_RFFT, + arm_cfft_radix4_instance_q31 * S_CFFT, + uint16_t N, + uint16_t Nby2, + q31_t normalize); + + /** + * @brief Processing function for the Q31 DCT4/IDCT4. + * @param[in] *S points to an instance of the Q31 DCT4 structure. + * @param[in] *pState points to state buffer. + * @param[in,out] *pInlineBuffer points to the in-place input and output buffer. + * @return none. + */ + + void arm_dct4_q31( + const arm_dct4_instance_q31 * S, + q31_t * pState, + q31_t * pInlineBuffer); + + /** + * @brief Instance structure for the Q15 DCT4/IDCT4 function. + */ + + typedef struct + { + uint16_t N; /**< length of the DCT4. */ + uint16_t Nby2; /**< half of the length of the DCT4. */ + q15_t normalize; /**< normalizing factor. */ + q15_t *pTwiddle; /**< points to the twiddle factor table. */ + q15_t *pCosFactor; /**< points to the cosFactor table. */ + arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */ + arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ + } arm_dct4_instance_q15; + + /** + * @brief Initialization function for the Q15 DCT4/IDCT4. + * @param[in,out] *S points to an instance of Q15 DCT4/IDCT4 structure. + * @param[in] *S_RFFT points to an instance of Q15 RFFT/RIFFT structure. + * @param[in] *S_CFFT points to an instance of Q15 CFFT/CIFFT structure. + * @param[in] N length of the DCT4. + * @param[in] Nby2 half of the length of the DCT4. + * @param[in] normalize normalizing factor. + * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length. + */ + + arm_status arm_dct4_init_q15( + arm_dct4_instance_q15 * S, + arm_rfft_instance_q15 * S_RFFT, + arm_cfft_radix4_instance_q15 * S_CFFT, + uint16_t N, + uint16_t Nby2, + q15_t normalize); + + /** + * @brief Processing function for the Q15 DCT4/IDCT4. + * @param[in] *S points to an instance of the Q15 DCT4 structure. + * @param[in] *pState points to state buffer. + * @param[in,out] *pInlineBuffer points to the in-place input and output buffer. + * @return none. + */ + + void arm_dct4_q15( + const arm_dct4_instance_q15 * S, + q15_t * pState, + q15_t * pInlineBuffer); + + /** + * @brief Floating-point vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Q7 vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector addition. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_add_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Floating-point vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Q7 vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_q7( + q7_t * pSrcA, + q7_t * pSrcB, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector subtraction. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_sub_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a floating-point vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scale scale factor to be applied + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_f32( + float32_t * pSrc, + float32_t scale, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a Q7 vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_q7( + q7_t * pSrc, + q7_t scaleFract, + int8_t shift, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a Q15 vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_q15( + q15_t * pSrc, + q15_t scaleFract, + int8_t shift, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Multiplies a Q31 vector by a scalar. + * @param[in] *pSrc points to the input vector + * @param[in] scaleFract fractional portion of the scale value + * @param[in] shift number of bits to shift the result by + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_scale_q31( + q31_t * pSrc, + q31_t scaleFract, + int8_t shift, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Q7 vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Floating-point vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Q15 vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Q31 vector absolute value. + * @param[in] *pSrc points to the input buffer + * @param[out] *pDst points to the output buffer + * @param[in] blockSize number of samples in each vector + * @return none. + */ + + void arm_abs_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Dot product of floating-point vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_f32( + float32_t * pSrcA, + float32_t * pSrcB, + uint32_t blockSize, + float32_t * result); + + /** + * @brief Dot product of Q7 vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_q7( + q7_t * pSrcA, + q7_t * pSrcB, + uint32_t blockSize, + q31_t * result); + + /** + * @brief Dot product of Q15 vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_q15( + q15_t * pSrcA, + q15_t * pSrcB, + uint32_t blockSize, + q63_t * result); + + /** + * @brief Dot product of Q31 vectors. + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] blockSize number of samples in each vector + * @param[out] *result output result returned here + * @return none. + */ + + void arm_dot_prod_q31( + q31_t * pSrcA, + q31_t * pSrcB, + uint32_t blockSize, + q63_t * result); + + /** + * @brief Shifts the elements of a Q7 vector a specified number of bits. + * @param[in] *pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_shift_q7( + q7_t * pSrc, + int8_t shiftBits, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Shifts the elements of a Q15 vector a specified number of bits. + * @param[in] *pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_shift_q15( + q15_t * pSrc, + int8_t shiftBits, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Shifts the elements of a Q31 vector a specified number of bits. + * @param[in] *pSrc points to the input vector + * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_shift_q31( + q31_t * pSrc, + int8_t shiftBits, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a floating-point vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_f32( + float32_t * pSrc, + float32_t offset, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a Q7 vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_q7( + q7_t * pSrc, + q7_t offset, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a Q15 vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_q15( + q15_t * pSrc, + q15_t offset, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Adds a constant offset to a Q31 vector. + * @param[in] *pSrc points to the input vector + * @param[in] offset is the offset to be added + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_offset_q31( + q31_t * pSrc, + q31_t offset, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a floating-point vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a Q7 vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a Q15 vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Negates the elements of a Q31 vector. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] blockSize number of samples in the vector + * @return none. + */ + + void arm_negate_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + /** + * @brief Copies the elements of a floating-point vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Copies the elements of a Q7 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_q7( + q7_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Copies the elements of a Q15 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Copies the elements of a Q31 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_copy_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + /** + * @brief Fills a constant value into a floating-point vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_f32( + float32_t value, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Fills a constant value into a Q7 vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_q7( + q7_t value, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Fills a constant value into a Q15 vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_q15( + q15_t value, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Fills a constant value into a Q31 vector. + * @param[in] value input value to be filled + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_fill_q31( + q31_t value, + q31_t * pDst, + uint32_t blockSize); + +/** + * @brief Convolution of floating-point sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst); + + + /** + * @brief Convolution of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + * @return none. + */ + + + void arm_conv_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + +/** + * @brief Convolution of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + /** + * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + /** + * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + * @return none. + */ + + void arm_conv_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + + + /** + * @brief Convolution of Q31 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + /** + * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + + /** + * @brief Convolution of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). + * @return none. + */ + + void arm_conv_opt_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + + + /** + * @brief Convolution of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1. + * @return none. + */ + + void arm_conv_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst); + + + /** + * @brief Partial convolution of floating-point sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + /** + * @brief Partial convolution of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2); + + +/** + * @brief Partial convolution of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + /** + * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2); + + + /** + * @brief Partial convolution of Q31 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + /** + * @brief Partial convolution of Q7 sequences + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_opt_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2); + + +/** + * @brief Partial convolution of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + */ + + arm_status arm_conv_partial_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + uint32_t firstIndex, + uint32_t numPoints); + + + + /** + * @brief Instance structure for the Q15 FIR decimator. + */ + + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + } arm_fir_decimate_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR decimator. + */ + + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + + } arm_fir_decimate_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR decimator. + */ + + typedef struct + { + uint8_t M; /**< decimation factor. */ + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + + } arm_fir_decimate_instance_f32; + + + + /** + * @brief Processing function for the floating-point FIR decimator. + * @param[in] *S points to an instance of the floating-point FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_f32( + const arm_fir_decimate_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point FIR decimator. + * @param[in,out] *S points to an instance of the floating-point FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + + arm_status arm_fir_decimate_init_f32( + arm_fir_decimate_instance_f32 * S, + uint16_t numTaps, + uint8_t M, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q15 FIR decimator. + * @param[in] *S points to an instance of the Q15 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_q15( + const arm_fir_decimate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q15 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_fast_q15( + const arm_fir_decimate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + + /** + * @brief Initialization function for the Q15 FIR decimator. + * @param[in,out] *S points to an instance of the Q15 FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + + arm_status arm_fir_decimate_init_q15( + arm_fir_decimate_instance_q15 * S, + uint16_t numTaps, + uint8_t M, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR decimator. + * @param[in] *S points to an instance of the Q31 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_q31( + const arm_fir_decimate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. + * @param[in] *S points to an instance of the Q31 FIR decimator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of input samples to process per call. + * @return none + */ + + void arm_fir_decimate_fast_q31( + arm_fir_decimate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 FIR decimator. + * @param[in,out] *S points to an instance of the Q31 FIR decimator structure. + * @param[in] numTaps number of coefficients in the filter. + * @param[in] M decimation factor. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * blockSize is not a multiple of M. + */ + + arm_status arm_fir_decimate_init_q31( + arm_fir_decimate_instance_q31 * S, + uint16_t numTaps, + uint8_t M, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + + + /** + * @brief Instance structure for the Q15 FIR interpolator. + */ + + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR interpolator. + */ + + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ + } arm_fir_interpolate_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR interpolator. + */ + + typedef struct + { + uint8_t L; /**< upsample factor. */ + uint16_t phaseLength; /**< length of each polyphase filter component. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ + float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */ + } arm_fir_interpolate_instance_f32; + + + /** + * @brief Processing function for the Q15 FIR interpolator. + * @param[in] *S points to an instance of the Q15 FIR interpolator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_interpolate_q15( + const arm_fir_interpolate_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 FIR interpolator. + * @param[in,out] *S points to an instance of the Q15 FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + + arm_status arm_fir_interpolate_init_q15( + arm_fir_interpolate_instance_q15 * S, + uint8_t L, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 FIR interpolator. + * @param[in] *S points to an instance of the Q15 FIR interpolator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_interpolate_q31( + const arm_fir_interpolate_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 FIR interpolator. + * @param[in,out] *S points to an instance of the Q31 FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + + arm_status arm_fir_interpolate_init_q31( + arm_fir_interpolate_instance_q31 * S, + uint8_t L, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the floating-point FIR interpolator. + * @param[in] *S points to an instance of the floating-point FIR interpolator structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_interpolate_f32( + const arm_fir_interpolate_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point FIR interpolator. + * @param[in,out] *S points to an instance of the floating-point FIR interpolator structure. + * @param[in] L upsample factor. + * @param[in] numTaps number of filter coefficients in the filter. + * @param[in] *pCoeffs points to the filter coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] blockSize number of input samples to process per call. + * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if + * the filter length numTaps is not a multiple of the interpolation factor L. + */ + + arm_status arm_fir_interpolate_init_f32( + arm_fir_interpolate_instance_f32 * S, + uint8_t L, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + uint32_t blockSize); + + /** + * @brief Instance structure for the high precision Q31 Biquad cascade filter. + */ + + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ + q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */ + + } arm_biquad_cas_df1_32x64_ins_q31; + + + /** + * @param[in] *S points to an instance of the high precision Q31 Biquad cascade filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cas_df1_32x64_q31( + const arm_biquad_cas_df1_32x64_ins_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @param[in,out] *S points to an instance of the high precision Q31 Biquad cascade filter structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format + * @return none + */ + + void arm_biquad_cas_df1_32x64_init_q31( + arm_biquad_cas_df1_32x64_ins_q31 * S, + uint8_t numStages, + q31_t * pCoeffs, + q63_t * pState, + uint8_t postShift); + + + + /** + * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. + */ + + typedef struct + { + uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ + float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ + float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ + } arm_biquad_cascade_df2T_instance_f32; + + + /** + * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in] *S points to an instance of the filter data structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_biquad_cascade_df2T_f32( + const arm_biquad_cascade_df2T_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. + * @param[in,out] *S points to an instance of the filter data structure. + * @param[in] numStages number of 2nd order stages in the filter. + * @param[in] *pCoeffs points to the filter coefficients. + * @param[in] *pState points to the state buffer. + * @return none + */ + + void arm_biquad_cascade_df2T_init_f32( + arm_biquad_cascade_df2T_instance_f32 * S, + uint8_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + + + /** + * @brief Instance structure for the Q15 FIR lattice filter. + */ + + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q15; + + /** + * @brief Instance structure for the Q31 FIR lattice filter. + */ + + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_q31; + + /** + * @brief Instance structure for the floating-point FIR lattice filter. + */ + + typedef struct + { + uint16_t numStages; /**< number of filter stages. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ + } arm_fir_lattice_instance_f32; + + /** + * @brief Initialization function for the Q15 FIR lattice filter. + * @param[in] *S points to an instance of the Q15 FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] *pState points to the state buffer. The array is of length numStages. + * @return none. + */ + + void arm_fir_lattice_init_q15( + arm_fir_lattice_instance_q15 * S, + uint16_t numStages, + q15_t * pCoeffs, + q15_t * pState); + + + /** + * @brief Processing function for the Q15 FIR lattice filter. + * @param[in] *S points to an instance of the Q15 FIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + void arm_fir_lattice_q15( + const arm_fir_lattice_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 FIR lattice filter. + * @param[in] *S points to an instance of the Q31 FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] *pState points to the state buffer. The array is of length numStages. + * @return none. + */ + + void arm_fir_lattice_init_q31( + arm_fir_lattice_instance_q31 * S, + uint16_t numStages, + q31_t * pCoeffs, + q31_t * pState); + + + /** + * @brief Processing function for the Q31 FIR lattice filter. + * @param[in] *S points to an instance of the Q31 FIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_fir_lattice_q31( + const arm_fir_lattice_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + +/** + * @brief Initialization function for the floating-point FIR lattice filter. + * @param[in] *S points to an instance of the floating-point FIR lattice structure. + * @param[in] numStages number of filter stages. + * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages. + * @param[in] *pState points to the state buffer. The array is of length numStages. + * @return none. + */ + + void arm_fir_lattice_init_f32( + arm_fir_lattice_instance_f32 * S, + uint16_t numStages, + float32_t * pCoeffs, + float32_t * pState); + + /** + * @brief Processing function for the floating-point FIR lattice filter. + * @param[in] *S points to an instance of the floating-point FIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_fir_lattice_f32( + const arm_fir_lattice_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Instance structure for the Q15 IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q15; + + /** + * @brief Instance structure for the Q31 IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_q31; + + /** + * @brief Instance structure for the floating-point IIR lattice filter. + */ + typedef struct + { + uint16_t numStages; /**< number of stages in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ + float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ + float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ + } arm_iir_lattice_instance_f32; + + /** + * @brief Processing function for the floating-point IIR lattice filter. + * @param[in] *S points to an instance of the floating-point IIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_f32( + const arm_iir_lattice_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point IIR lattice filter. + * @param[in] *S points to an instance of the floating-point IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. + * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. + * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize-1. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_init_f32( + arm_iir_lattice_instance_f32 * S, + uint16_t numStages, + float32_t * pkCoeffs, + float32_t * pvCoeffs, + float32_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q31 IIR lattice filter. + * @param[in] *S points to an instance of the Q31 IIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_q31( + const arm_iir_lattice_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q31 IIR lattice filter. + * @param[in] *S points to an instance of the Q31 IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. + * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. + * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_init_q31( + arm_iir_lattice_instance_q31 * S, + uint16_t numStages, + q31_t * pkCoeffs, + q31_t * pvCoeffs, + q31_t * pState, + uint32_t blockSize); + + + /** + * @brief Processing function for the Q15 IIR lattice filter. + * @param[in] *S points to an instance of the Q15 IIR lattice structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_iir_lattice_q15( + const arm_iir_lattice_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + +/** + * @brief Initialization function for the Q15 IIR lattice filter. + * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure. + * @param[in] numStages number of stages in the filter. + * @param[in] *pkCoeffs points to reflection coefficient buffer. The array is of length numStages. + * @param[in] *pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1. + * @param[in] *pState points to state buffer. The array is of length numStages+blockSize. + * @param[in] blockSize number of samples to process per call. + * @return none. + */ + + void arm_iir_lattice_init_q15( + arm_iir_lattice_instance_q15 * S, + uint16_t numStages, + q15_t * pkCoeffs, + q15_t * pvCoeffs, + q15_t * pState, + uint32_t blockSize); + + /** + * @brief Instance structure for the floating-point LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that controls filter coefficient updates. */ + } arm_lms_instance_f32; + + /** + * @brief Processing function for floating-point LMS filter. + * @param[in] *S points to an instance of the floating-point LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_f32( + const arm_lms_instance_f32 * S, + float32_t * pSrc, + float32_t * pRef, + float32_t * pOut, + float32_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for floating-point LMS filter. + * @param[in] *S points to an instance of the floating-point LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to the coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_init_f32( + arm_lms_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + float32_t mu, + uint32_t blockSize); + + /** + * @brief Instance structure for the Q15 LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ + } arm_lms_instance_q15; + + + /** + * @brief Initialization function for the Q15 LMS filter. + * @param[in] *S points to an instance of the Q15 LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to the coefficient buffer. + * @param[in] *pState points to the state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_init_q15( + arm_lms_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + q15_t mu, + uint32_t blockSize, + uint32_t postShift); + + /** + * @brief Processing function for Q15 LMS filter. + * @param[in] *S points to an instance of the Q15 LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_q15( + const arm_lms_instance_q15 * S, + q15_t * pSrc, + q15_t * pRef, + q15_t * pOut, + q15_t * pErr, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q31 LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint32_t postShift; /**< bit shift applied to coefficients. */ + + } arm_lms_instance_q31; + + /** + * @brief Processing function for Q31 LMS filter. + * @param[in] *S points to an instance of the Q15 LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_q31( + const arm_lms_instance_q31 * S, + q31_t * pSrc, + q31_t * pRef, + q31_t * pOut, + q31_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for Q31 LMS filter. + * @param[in] *S points to an instance of the Q31 LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_init_q31( + arm_lms_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + q31_t mu, + uint32_t blockSize, + uint32_t postShift); + + /** + * @brief Instance structure for the floating-point normalized LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + float32_t mu; /**< step size that control filter coefficient updates. */ + float32_t energy; /**< saves previous frame energy. */ + float32_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_f32; + + /** + * @brief Processing function for floating-point normalized LMS filter. + * @param[in] *S points to an instance of the floating-point normalized LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_f32( + arm_lms_norm_instance_f32 * S, + float32_t * pSrc, + float32_t * pRef, + float32_t * pOut, + float32_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for floating-point normalized LMS filter. + * @param[in] *S points to an instance of the floating-point LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_init_f32( + arm_lms_norm_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + float32_t mu, + uint32_t blockSize); + + + /** + * @brief Instance structure for the Q31 normalized LMS filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q31_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q31_t *recipTable; /**< points to the reciprocal initial value table. */ + q31_t energy; /**< saves previous frame energy. */ + q31_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q31; + + /** + * @brief Processing function for Q31 normalized LMS filter. + * @param[in] *S points to an instance of the Q31 normalized LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_q31( + arm_lms_norm_instance_q31 * S, + q31_t * pSrc, + q31_t * pRef, + q31_t * pOut, + q31_t * pErr, + uint32_t blockSize); + + /** + * @brief Initialization function for Q31 normalized LMS filter. + * @param[in] *S points to an instance of the Q31 normalized LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_norm_init_q31( + arm_lms_norm_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + q31_t mu, + uint32_t blockSize, + uint8_t postShift); + + /** + * @brief Instance structure for the Q15 normalized LMS filter. + */ + + typedef struct + { + uint16_t numTaps; /**< Number of coefficients in the filter. */ + q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ + q15_t mu; /**< step size that controls filter coefficient updates. */ + uint8_t postShift; /**< bit shift applied to coefficients. */ + q15_t *recipTable; /**< Points to the reciprocal initial value table. */ + q15_t energy; /**< saves previous frame energy. */ + q15_t x0; /**< saves previous input sample. */ + } arm_lms_norm_instance_q15; + + /** + * @brief Processing function for Q15 normalized LMS filter. + * @param[in] *S points to an instance of the Q15 normalized LMS filter structure. + * @param[in] *pSrc points to the block of input data. + * @param[in] *pRef points to the block of reference data. + * @param[out] *pOut points to the block of output data. + * @param[out] *pErr points to the block of error data. + * @param[in] blockSize number of samples to process. + * @return none. + */ + + void arm_lms_norm_q15( + arm_lms_norm_instance_q15 * S, + q15_t * pSrc, + q15_t * pRef, + q15_t * pOut, + q15_t * pErr, + uint32_t blockSize); + + + /** + * @brief Initialization function for Q15 normalized LMS filter. + * @param[in] *S points to an instance of the Q15 normalized LMS filter structure. + * @param[in] numTaps number of filter coefficients. + * @param[in] *pCoeffs points to coefficient buffer. + * @param[in] *pState points to state buffer. + * @param[in] mu step size that controls filter coefficient updates. + * @param[in] blockSize number of samples to process. + * @param[in] postShift bit shift applied to coefficients. + * @return none. + */ + + void arm_lms_norm_init_q15( + arm_lms_norm_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + q15_t mu, + uint32_t blockSize, + uint8_t postShift); + + /** + * @brief Correlation of floating-point sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_f32( + float32_t * pSrcA, + uint32_t srcALen, + float32_t * pSrcB, + uint32_t srcBLen, + float32_t * pDst); + + + /** + * @brief Correlation of Q15 sequences + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @return none. + */ + void arm_correlate_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch); + + + /** + * @brief Correlation of Q15 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + /** + * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_fast_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst); + + + + /** + * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @return none. + */ + + void arm_correlate_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + q15_t * pScratch); + + /** + * @brief Correlation of Q31 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + /** + * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_fast_q31( + q31_t * pSrcA, + uint32_t srcALen, + q31_t * pSrcB, + uint32_t srcBLen, + q31_t * pDst); + + + + /** + * @brief Correlation of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). + * @return none. + */ + + void arm_correlate_opt_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst, + q15_t * pScratch1, + q15_t * pScratch2); + + + /** + * @brief Correlation of Q7 sequences. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. + * @return none. + */ + + void arm_correlate_q7( + q7_t * pSrcA, + uint32_t srcALen, + q7_t * pSrcB, + uint32_t srcBLen, + q7_t * pDst); + + + /** + * @brief Instance structure for the floating-point sparse FIR filter. + */ + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_f32; + + /** + * @brief Instance structure for the Q31 sparse FIR filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q31; + + /** + * @brief Instance structure for the Q15 sparse FIR filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q15; + + /** + * @brief Instance structure for the Q7 sparse FIR filter. + */ + + typedef struct + { + uint16_t numTaps; /**< number of coefficients in the filter. */ + uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ + q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ + q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ + uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ + int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ + } arm_fir_sparse_instance_q7; + + /** + * @brief Processing function for the floating-point sparse FIR filter. + * @param[in] *S points to an instance of the floating-point sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_f32( + arm_fir_sparse_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + float32_t * pScratchIn, + uint32_t blockSize); + + /** + * @brief Initialization function for the floating-point sparse FIR filter. + * @param[in,out] *S points to an instance of the floating-point sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_f32( + arm_fir_sparse_instance_f32 * S, + uint16_t numTaps, + float32_t * pCoeffs, + float32_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + /** + * @brief Processing function for the Q31 sparse FIR filter. + * @param[in] *S points to an instance of the Q31 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_q31( + arm_fir_sparse_instance_q31 * S, + q31_t * pSrc, + q31_t * pDst, + q31_t * pScratchIn, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q31 sparse FIR filter. + * @param[in,out] *S points to an instance of the Q31 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_q31( + arm_fir_sparse_instance_q31 * S, + uint16_t numTaps, + q31_t * pCoeffs, + q31_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + /** + * @brief Processing function for the Q15 sparse FIR filter. + * @param[in] *S points to an instance of the Q15 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] *pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_q15( + arm_fir_sparse_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + q15_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize); + + + /** + * @brief Initialization function for the Q15 sparse FIR filter. + * @param[in,out] *S points to an instance of the Q15 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_q15( + arm_fir_sparse_instance_q15 * S, + uint16_t numTaps, + q15_t * pCoeffs, + q15_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + /** + * @brief Processing function for the Q7 sparse FIR filter. + * @param[in] *S points to an instance of the Q7 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] *pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + + void arm_fir_sparse_q7( + arm_fir_sparse_instance_q7 * S, + q7_t * pSrc, + q7_t * pDst, + q7_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize); + + /** + * @brief Initialization function for the Q7 sparse FIR filter. + * @param[in,out] *S points to an instance of the Q7 sparse FIR structure. + * @param[in] numTaps number of nonzero coefficients in the filter. + * @param[in] *pCoeffs points to the array of filter coefficients. + * @param[in] *pState points to the state buffer. + * @param[in] *pTapDelay points to the array of offset times. + * @param[in] maxDelay maximum offset time supported. + * @param[in] blockSize number of samples that will be processed per block. + * @return none + */ + + void arm_fir_sparse_init_q7( + arm_fir_sparse_instance_q7 * S, + uint16_t numTaps, + q7_t * pCoeffs, + q7_t * pState, + int32_t * pTapDelay, + uint16_t maxDelay, + uint32_t blockSize); + + + /* + * @brief Floating-point sin_cos function. + * @param[in] theta input value in degrees + * @param[out] *pSinVal points to the processed sine output. + * @param[out] *pCosVal points to the processed cos output. + * @return none. + */ + + void arm_sin_cos_f32( + float32_t theta, + float32_t * pSinVal, + float32_t * pCcosVal); + + /* + * @brief Q31 sin_cos function. + * @param[in] theta scaled input value in degrees + * @param[out] *pSinVal points to the processed sine output. + * @param[out] *pCosVal points to the processed cosine output. + * @return none. + */ + + void arm_sin_cos_q31( + q31_t theta, + q31_t * pSinVal, + q31_t * pCosVal); + + + /** + * @brief Floating-point complex conjugate. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_conj_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex conjugate. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_conj_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex conjugate. + * @param[in] *pSrc points to the input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_conj_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + + + /** + * @brief Floating-point complex magnitude squared + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_squared_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex magnitude squared + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_squared_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex magnitude squared + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_squared_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + + /** + * @ingroup groupController + */ + + /** + * @defgroup PID PID Motor Control + * + * A Proportional Integral Derivative (PID) controller is a generic feedback control + * loop mechanism widely used in industrial control systems. + * A PID controller is the most commonly used type of feedback controller. + * + * This set of functions implements (PID) controllers + * for Q15, Q31, and floating-point data types. The functions operate on a single sample + * of data and each call to the function returns a single processed value. + * S points to an instance of the PID control data structure. in + * is the input sample value. The functions return the output value. + * + * \par Algorithm: + * 
+   *    y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+   *    A0 = Kp + Ki + Kd
+   *    A1 = (-Kp ) - (2 * Kd )
+   *    A2 = Kd
+ * + * \par + * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant + * + * \par + * \image html PID.gif "Proportional Integral Derivative Controller" + * + * \par + * The PID controller calculates an "error" value as the difference between + * the measured output and the reference input. + * The controller attempts to minimize the error by adjusting the process control inputs. + * The proportional value determines the reaction to the current error, + * the integral value determines the reaction based on the sum of recent errors, + * and the derivative value determines the reaction based on the rate at which the error has been changing. + * + * \par Instance Structure + * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure. + * A separate instance structure must be defined for each PID Controller. + * There are separate instance structure declarations for each of the 3 supported data types. + * + * \par Reset Functions + * There is also an associated reset function for each data type which clears the state array. + * + * \par Initialization Functions + * There is also an associated initialization function for each data type. + * The initialization function performs the following operations: + * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains. + * - Zeros out the values in the state buffer. + * + * \par + * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function. + * + * \par Fixed-Point Behavior + * Care must be taken when using the fixed-point versions of the PID Controller functions. + * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup PID + * @{ + */ + + /** + * @brief Process function for the floating-point PID Control. + * @param[in,out] *S is an instance of the floating-point PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + */ + + + static __INLINE float32_t arm_pid_f32( + arm_pid_instance_f32 * S, + float32_t in) + { + float32_t out; + + /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */ + out = (S->A0 * in) + + (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]); + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + + } + + /** + * @brief Process function for the Q31 PID Control. + * @param[in,out] *S points to an instance of the Q31 PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 64-bit accumulator. + * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit. + * Thus, if the accumulator result overflows it wraps around rather than clip. + * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions. + * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format. + */ + + static __INLINE q31_t arm_pid_q31( + arm_pid_instance_q31 * S, + q31_t in) + { + q63_t acc; + q31_t out; + + /* acc = A0 * x[n] */ + acc = (q63_t) S->A0 * in; + + /* acc += A1 * x[n-1] */ + acc += (q63_t) S->A1 * S->state[0]; + + /* acc += A2 * x[n-2] */ + acc += (q63_t) S->A2 * S->state[1]; + + /* convert output to 1.31 format to add y[n-1] */ + out = (q31_t) (acc >> 31u); + + /* out += y[n-1] */ + out += S->state[2]; + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + + } + + /** + * @brief Process function for the Q15 PID Control. + * @param[in,out] *S points to an instance of the Q15 PID Control structure + * @param[in] in input sample to process + * @return out processed output sample. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using a 64-bit internal accumulator. + * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result. + * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. + * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved. + * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits. + * Lastly, the accumulator is saturated to yield a result in 1.15 format. + */ + + static __INLINE q15_t arm_pid_q15( + arm_pid_instance_q15 * S, + q15_t in) + { + q63_t acc; + q15_t out; + +#ifndef ARM_MATH_CM0_FAMILY + __SIMD32_TYPE *vstate; + + /* Implementation of PID controller */ + + /* acc = A0 * x[n] */ + acc = (q31_t) __SMUAD(S->A0, in); + + /* acc += A1 * x[n-1] + A2 * x[n-2] */ + vstate = __SIMD32_CONST(S->state); + acc = __SMLALD(S->A1, (q31_t) *vstate, acc); + +#else + /* acc = A0 * x[n] */ + acc = ((q31_t) S->A0) * in; + + /* acc += A1 * x[n-1] + A2 * x[n-2] */ + acc += (q31_t) S->A1 * S->state[0]; + acc += (q31_t) S->A2 * S->state[1]; + +#endif + + /* acc += y[n-1] */ + acc += (q31_t) S->state[2] << 15; + + /* saturate the output */ + out = (q15_t) (__SSAT((acc >> 15), 16)); + + /* Update state */ + S->state[1] = S->state[0]; + S->state[0] = in; + S->state[2] = out; + + /* return to application */ + return (out); + + } + + /** + * @} end of PID group + */ + + + /** + * @brief Floating-point matrix inverse. + * @param[in] *src points to the instance of the input floating-point matrix structure. + * @param[out] *dst points to the instance of the output floating-point matrix structure. + * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match. + * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. + */ + + arm_status arm_mat_inverse_f32( + const arm_matrix_instance_f32 * src, + arm_matrix_instance_f32 * dst); + + + + /** + * @ingroup groupController + */ + + + /** + * @defgroup clarke Vector Clarke Transform + * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector. + * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic to calculate currents + * in the two-phase orthogonal stator axis Ialpha and Ibeta. + * When Ialpha is superposed with Ia as shown in the figure below + * \image html clarke.gif Stator current space vector and its components in (a,b). + * and Ia + Ib + Ic = 0, in this condition Ialpha and Ibeta + * can be calculated using only Ia and Ib. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html clarkeFormula.gif + * where Ia and Ib are the instantaneous stator phases and + * pIalpha and pIbeta are the two coordinates of time invariant vector. + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Clarke transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup clarke + * @{ + */ + + /** + * + * @brief Floating-point Clarke transform + * @param[in] Ia input three-phase coordinate a + * @param[in] Ib input three-phase coordinate b + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @return none. + */ + + static __INLINE void arm_clarke_f32( + float32_t Ia, + float32_t Ib, + float32_t * pIalpha, + float32_t * pIbeta) + { + /* Calculate pIalpha using the equation, pIalpha = Ia */ + *pIalpha = Ia; + + /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */ + *pIbeta = + ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib); + + } + + /** + * @brief Clarke transform for Q31 version + * @param[in] Ia input three-phase coordinate a + * @param[in] Ib input three-phase coordinate b + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition, hence there is no risk of overflow. + */ + + static __INLINE void arm_clarke_q31( + q31_t Ia, + q31_t Ib, + q31_t * pIalpha, + q31_t * pIbeta) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + + /* Calculating pIalpha from Ia by equation pIalpha = Ia */ + *pIalpha = Ia; + + /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */ + product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30); + + /* Intermediate product is calculated by (2/sqrt(3) * Ib) */ + product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30); + + /* pIbeta is calculated by adding the intermediate products */ + *pIbeta = __QADD(product1, product2); + } + + /** + * @} end of clarke group + */ + + /** + * @brief Converts the elements of the Q7 vector to Q31 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_q7_to_q31( + q7_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + + + /** + * @ingroup groupController + */ + + /** + * @defgroup inv_clarke Vector Inverse Clarke Transform + * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html clarkeInvFormula.gif + * where pIa and pIb are the instantaneous stator phases and + * Ialpha and Ibeta are the two coordinates of time invariant vector. + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Clarke transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup inv_clarke + * @{ + */ + + /** + * @brief Floating-point Inverse Clarke transform + * @param[in] Ialpha input two-phase orthogonal vector axis alpha + * @param[in] Ibeta input two-phase orthogonal vector axis beta + * @param[out] *pIa points to output three-phase coordinate a + * @param[out] *pIb points to output three-phase coordinate b + * @return none. + */ + + + static __INLINE void arm_inv_clarke_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t * pIa, + float32_t * pIb) + { + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; + + /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */ + *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta; + + } + + /** + * @brief Inverse Clarke transform for Q31 version + * @param[in] Ialpha input two-phase orthogonal vector axis alpha + * @param[in] Ibeta input two-phase orthogonal vector axis beta + * @param[out] *pIa points to output three-phase coordinate a + * @param[out] *pIb points to output three-phase coordinate b + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the subtraction, hence there is no risk of overflow. + */ + + static __INLINE void arm_inv_clarke_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t * pIa, + q31_t * pIb) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + + /* Calculating pIa from Ialpha by equation pIa = Ialpha */ + *pIa = Ialpha; + + /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */ + product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31); + + /* Intermediate product is calculated by (1/sqrt(3) * pIb) */ + product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31); + + /* pIb is calculated by subtracting the products */ + *pIb = __QSUB(product2, product1); + + } + + /** + * @} end of inv_clarke group + */ + + /** + * @brief Converts the elements of the Q7 vector to Q15 vector. + * @param[in] *pSrc input pointer + * @param[out] *pDst output pointer + * @param[in] blockSize number of samples to process + * @return none. + */ + void arm_q7_to_q15( + q7_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + + + /** + * @ingroup groupController + */ + + /** + * @defgroup park Vector Park Transform + * + * Forward Park transform converts the input two-coordinate vector to flux and torque components. + * The Park transform can be used to realize the transformation of the Ialpha and the Ibeta currents + * from the stationary to the moving reference frame and control the spatial relationship between + * the stator vector current and rotor flux vector. + * If we consider the d axis aligned with the rotor flux, the diagram below shows the + * current vector and the relationship from the two reference frames: + * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame" + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html parkFormula.gif + * where Ialpha and Ibeta are the stator vector components, + * pId and pIq are rotor vector components and cosVal and sinVal are the + * cosine and sine values of theta (rotor flux position). + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Park transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup park + * @{ + */ + + /** + * @brief Floating-point Park transform + * @param[in] Ialpha input two-phase vector coordinate alpha + * @param[in] Ibeta input two-phase vector coordinate beta + * @param[out] *pId points to output rotor reference frame d + * @param[out] *pIq points to output rotor reference frame q + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + * + * The function implements the forward Park transform. + * + */ + + static __INLINE void arm_park_f32( + float32_t Ialpha, + float32_t Ibeta, + float32_t * pId, + float32_t * pIq, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */ + *pId = Ialpha * cosVal + Ibeta * sinVal; + + /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */ + *pIq = -Ialpha * sinVal + Ibeta * cosVal; + + } + + /** + * @brief Park transform for Q31 version + * @param[in] Ialpha input two-phase vector coordinate alpha + * @param[in] Ibeta input two-phase vector coordinate beta + * @param[out] *pId points to output rotor reference frame d + * @param[out] *pIq points to output rotor reference frame q + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition and subtraction, hence there is no risk of overflow. + */ + + + static __INLINE void arm_park_q31( + q31_t Ialpha, + q31_t Ibeta, + q31_t * pId, + q31_t * pIq, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ + + /* Intermediate product is calculated by (Ialpha * cosVal) */ + product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31); + + /* Intermediate product is calculated by (Ibeta * sinVal) */ + product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31); + + + /* Intermediate product is calculated by (Ialpha * sinVal) */ + product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31); + + /* Intermediate product is calculated by (Ibeta * cosVal) */ + product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31); + + /* Calculate pId by adding the two intermediate products 1 and 2 */ + *pId = __QADD(product1, product2); + + /* Calculate pIq by subtracting the two intermediate products 3 from 4 */ + *pIq = __QSUB(product4, product3); + } + + /** + * @} end of park group + */ + + /** + * @brief Converts the elements of the Q7 vector to floating-point vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q7_to_float( + q7_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @ingroup groupController + */ + + /** + * @defgroup inv_park Vector Inverse Park transform + * Inverse Park transform converts the input flux and torque components to two-coordinate vector. + * + * The function operates on a single sample of data and each call to the function returns the processed output. + * The library provides separate functions for Q31 and floating-point data types. + * \par Algorithm + * \image html parkInvFormula.gif + * where pIalpha and pIbeta are the stator vector components, + * Id and Iq are rotor vector components and cosVal and sinVal are the + * cosine and sine values of theta (rotor flux position). + * \par Fixed-Point Behavior + * Care must be taken when using the Q31 version of the Park transform. + * In particular, the overflow and saturation behavior of the accumulator used must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + + /** + * @addtogroup inv_park + * @{ + */ + + /** + * @brief Floating-point Inverse Park transform + * @param[in] Id input coordinate of rotor reference frame d + * @param[in] Iq input coordinate of rotor reference frame q + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + */ + + static __INLINE void arm_inv_park_f32( + float32_t Id, + float32_t Iq, + float32_t * pIalpha, + float32_t * pIbeta, + float32_t sinVal, + float32_t cosVal) + { + /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */ + *pIalpha = Id * cosVal - Iq * sinVal; + + /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */ + *pIbeta = Id * sinVal + Iq * cosVal; + + } + + + /** + * @brief Inverse Park transform for Q31 version + * @param[in] Id input coordinate of rotor reference frame d + * @param[in] Iq input coordinate of rotor reference frame q + * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha + * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta + * @param[in] sinVal sine value of rotation angle theta + * @param[in] cosVal cosine value of rotation angle theta + * @return none. + * + * Scaling and Overflow Behavior: + * \par + * The function is implemented using an internal 32-bit accumulator. + * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. + * There is saturation on the addition, hence there is no risk of overflow. + */ + + + static __INLINE void arm_inv_park_q31( + q31_t Id, + q31_t Iq, + q31_t * pIalpha, + q31_t * pIbeta, + q31_t sinVal, + q31_t cosVal) + { + q31_t product1, product2; /* Temporary variables used to store intermediate results */ + q31_t product3, product4; /* Temporary variables used to store intermediate results */ + + /* Intermediate product is calculated by (Id * cosVal) */ + product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31); + + /* Intermediate product is calculated by (Iq * sinVal) */ + product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31); + + + /* Intermediate product is calculated by (Id * sinVal) */ + product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31); + + /* Intermediate product is calculated by (Iq * cosVal) */ + product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31); + + /* Calculate pIalpha by using the two intermediate products 1 and 2 */ + *pIalpha = __QSUB(product1, product2); + + /* Calculate pIbeta by using the two intermediate products 3 and 4 */ + *pIbeta = __QADD(product4, product3); + + } + + /** + * @} end of Inverse park group + */ + + + /** + * @brief Converts the elements of the Q31 vector to floating-point vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q31_to_float( + q31_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + /** + * @ingroup groupInterpolation + */ + + /** + * @defgroup LinearInterpolate Linear Interpolation + * + * Linear interpolation is a method of curve fitting using linear polynomials. + * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line + * + * \par + * \image html LinearInterp.gif "Linear interpolation" + * + * \par + * A Linear Interpolate function calculates an output value(y), for the input(x) + * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values) + * + * \par Algorithm: + * 
+   *       y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+   *       where x0, x1 are nearest values of input x
+   *             y0, y1 are nearest values to output y
+   *
+ * + * \par + * This set of functions implements Linear interpolation process + * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single + * sample of data and each call to the function returns a single processed value. + * S points to an instance of the Linear Interpolate function data structure. + * x is the input sample value. The functions returns the output value. + * + * \par + * if x is outside of the table boundary, Linear interpolation returns first value of the table + * if x is below input range and returns last value of table if x is above range. + */ + + /** + * @addtogroup LinearInterpolate + * @{ + */ + + /** + * @brief Process function for the floating-point Linear Interpolation Function. + * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure + * @param[in] x input sample to process + * @return y processed output sample. + * + */ + + static __INLINE float32_t arm_linear_interp_f32( + arm_linear_interp_instance_f32 * S, + float32_t x) + { + + float32_t y; + float32_t x0, x1; /* Nearest input values */ + float32_t y0, y1; /* Nearest output values */ + float32_t xSpacing = S->xSpacing; /* spacing between input values */ + int32_t i; /* Index variable */ + float32_t *pYData = S->pYData; /* pointer to output table */ + + /* Calculation of index */ + i = (int32_t) ((x - S->x1) / xSpacing); + + if(i < 0) + { + /* Iniatilize output for below specified range as least output value of table */ + y = pYData[0]; + } + else if((uint32_t)i >= S->nValues) + { + /* Iniatilize output for above specified range as last output value of table */ + y = pYData[S->nValues - 1]; + } + else + { + /* Calculation of nearest input values */ + x0 = S->x1 + i * xSpacing; + x1 = S->x1 + (i + 1) * xSpacing; + + /* Read of nearest output values */ + y0 = pYData[i]; + y1 = pYData[i + 1]; + + /* Calculation of output */ + y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0)); + + } + + /* returns output value */ + return (y); + } + + /** + * + * @brief Process function for the Q31 Linear Interpolation Function. + * @param[in] *pYData pointer to Q31 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + * + */ + + + static __INLINE q31_t arm_linear_interp_q31( + q31_t * pYData, + q31_t x, + uint32_t nValues) + { + q31_t y; /* output */ + q31_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & 0xFFF00000) >> 20); + + if(index >= (int32_t)(nValues - 1)) + { + return (pYData[nValues - 1]); + } + else if(index < 0) + { + return (pYData[0]); + } + else + { + + /* 20 bits for the fractional part */ + /* shift left by 11 to keep fract in 1.31 format */ + fract = (x & 0x000FFFFF) << 11; + + /* Read two nearest output values from the index in 1.31(q31) format */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; + + /* Calculation of y0 * (1-fract) and y is in 2.30 format */ + y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32)); + + /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */ + y += ((q31_t) (((q63_t) y1 * fract) >> 32)); + + /* Convert y to 1.31 format */ + return (y << 1u); + + } + + } + + /** + * + * @brief Process function for the Q15 Linear Interpolation Function. + * @param[in] *pYData pointer to Q15 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + * + */ + + + static __INLINE q15_t arm_linear_interp_q15( + q15_t * pYData, + q31_t x, + uint32_t nValues) + { + q63_t y; /* output */ + q15_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + int32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + index = ((x & 0xFFF00000) >> 20u); + + if(index >= (int32_t)(nValues - 1)) + { + return (pYData[nValues - 1]); + } + else if(index < 0) + { + return (pYData[0]); + } + else + { + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; + + /* Calculation of y0 * (1-fract) and y is in 13.35 format */ + y = ((q63_t) y0 * (0xFFFFF - fract)); + + /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */ + y += ((q63_t) y1 * (fract)); + + /* convert y to 1.15 format */ + return (y >> 20); + } + + + } + + /** + * + * @brief Process function for the Q7 Linear Interpolation Function. + * @param[in] *pYData pointer to Q7 Linear Interpolation table + * @param[in] x input sample to process + * @param[in] nValues number of table values + * @return y processed output sample. + * + * \par + * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. + * This function can support maximum of table size 2^12. + */ + + + static __INLINE q7_t arm_linear_interp_q7( + q7_t * pYData, + q31_t x, + uint32_t nValues) + { + q31_t y; /* output */ + q7_t y0, y1; /* Nearest output values */ + q31_t fract; /* fractional part */ + uint32_t index; /* Index to read nearest output values */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + if (x < 0) + { + return (pYData[0]); + } + index = (x >> 20) & 0xfff; + + + if(index >= (nValues - 1)) + { + return (pYData[nValues - 1]); + } + else + { + + /* 20 bits for the fractional part */ + /* fract is in 12.20 format */ + fract = (x & 0x000FFFFF); + + /* Read two nearest output values from the index and are in 1.7(q7) format */ + y0 = pYData[index]; + y1 = pYData[index + 1u]; + + /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */ + y = ((y0 * (0xFFFFF - fract))); + + /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */ + y += (y1 * fract); + + /* convert y to 1.7(q7) format */ + return (y >> 20u); + + } + + } + /** + * @} end of LinearInterpolate group + */ + + /** + * @brief Fast approximation to the trigonometric sine function for floating-point data. + * @param[in] x input value in radians. + * @return sin(x). + */ + + float32_t arm_sin_f32( + float32_t x); + + /** + * @brief Fast approximation to the trigonometric sine function for Q31 data. + * @param[in] x Scaled input value in radians. + * @return sin(x). + */ + + q31_t arm_sin_q31( + q31_t x); + + /** + * @brief Fast approximation to the trigonometric sine function for Q15 data. + * @param[in] x Scaled input value in radians. + * @return sin(x). + */ + + q15_t arm_sin_q15( + q15_t x); + + /** + * @brief Fast approximation to the trigonometric cosine function for floating-point data. + * @param[in] x input value in radians. + * @return cos(x). + */ + + float32_t arm_cos_f32( + float32_t x); + + /** + * @brief Fast approximation to the trigonometric cosine function for Q31 data. + * @param[in] x Scaled input value in radians. + * @return cos(x). + */ + + q31_t arm_cos_q31( + q31_t x); + + /** + * @brief Fast approximation to the trigonometric cosine function for Q15 data. + * @param[in] x Scaled input value in radians. + * @return cos(x). + */ + + q15_t arm_cos_q15( + q15_t x); + + + /** + * @ingroup groupFastMath + */ + + + /** + * @defgroup SQRT Square Root + * + * Computes the square root of a number. + * There are separate functions for Q15, Q31, and floating-point data types. + * The square root function is computed using the Newton-Raphson algorithm. + * This is an iterative algorithm of the form: + * 
+   *      x1 = x0 - f(x0)/f'(x0)
+   *
+ * where x1 is the current estimate, + * x0 is the previous estimate, and + * f'(x0) is the derivative of f() evaluated at x0. + * For the square root function, the algorithm reduces to: + * 
+   *     x0 = in/2                         [initial guess]
+   *     x1 = 1/2 * ( x0 + in / x0)        [each iteration]
+   *
+ */ + + + /** + * @addtogroup SQRT + * @{ + */ + + /** + * @brief Floating-point square root function. + * @param[in] in input value. + * @param[out] *pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + + static __INLINE arm_status arm_sqrt_f32( + float32_t in, + float32_t * pOut) + { + if(in > 0) + { + +// #if __FPU_USED +#if (__FPU_USED == 1) && defined ( __CC_ARM ) + *pOut = __sqrtf(in); +#else + *pOut = sqrtf(in); +#endif + + return (ARM_MATH_SUCCESS); + } + else + { + *pOut = 0.0f; + return (ARM_MATH_ARGUMENT_ERROR); + } + + } + + + /** + * @brief Q31 square root function. + * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF. + * @param[out] *pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + arm_status arm_sqrt_q31( + q31_t in, + q31_t * pOut); + + /** + * @brief Q15 square root function. + * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF. + * @param[out] *pOut square root of input value. + * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if + * in is negative value and returns zero output for negative values. + */ + arm_status arm_sqrt_q15( + q15_t in, + q15_t * pOut); + + /** + * @} end of SQRT group + */ + + + + + + + /** + * @brief floating-point Circular write function. + */ + + static __INLINE void arm_circularWrite_f32( + int32_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const int32_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; + } + + + + /** + * @brief floating-point Circular Read function. + */ + static __INLINE void arm_circularRead_f32( + int32_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + int32_t * dst, + int32_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (int32_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + /** + * @brief Q15 Circular write function. + */ + + static __INLINE void arm_circularWrite_q15( + q15_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const q15_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; + } + + + + /** + * @brief Q15 Circular Read function. + */ + static __INLINE void arm_circularRead_q15( + q15_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + q15_t * dst, + q15_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (q15_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update wOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + + /** + * @brief Q7 Circular write function. + */ + + static __INLINE void arm_circularWrite_q7( + q7_t * circBuffer, + int32_t L, + uint16_t * writeOffset, + int32_t bufferInc, + const q7_t * src, + int32_t srcInc, + uint32_t blockSize) + { + uint32_t i = 0u; + int32_t wOffset; + + /* Copy the value of Index pointer that points + * to the current location where the input samples to be copied */ + wOffset = *writeOffset; + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the input sample to the circular buffer */ + circBuffer[wOffset] = *src; + + /* Update the input pointer */ + src += srcInc; + + /* Circularly update wOffset. Watch out for positive and negative value */ + wOffset += bufferInc; + if(wOffset >= L) + wOffset -= L; + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *writeOffset = wOffset; + } + + + + /** + * @brief Q7 Circular Read function. + */ + static __INLINE void arm_circularRead_q7( + q7_t * circBuffer, + int32_t L, + int32_t * readOffset, + int32_t bufferInc, + q7_t * dst, + q7_t * dst_base, + int32_t dst_length, + int32_t dstInc, + uint32_t blockSize) + { + uint32_t i = 0; + int32_t rOffset, dst_end; + + /* Copy the value of Index pointer that points + * to the current location from where the input samples to be read */ + rOffset = *readOffset; + + dst_end = (int32_t) (dst_base + dst_length); + + /* Loop over the blockSize */ + i = blockSize; + + while(i > 0u) + { + /* copy the sample from the circular buffer to the destination buffer */ + *dst = circBuffer[rOffset]; + + /* Update the input pointer */ + dst += dstInc; + + if(dst == (q7_t *) dst_end) + { + dst = dst_base; + } + + /* Circularly update rOffset. Watch out for positive and negative value */ + rOffset += bufferInc; + + if(rOffset >= L) + { + rOffset -= L; + } + + /* Decrement the loop counter */ + i--; + } + + /* Update the index pointer */ + *readOffset = rOffset; + } + + + /** + * @brief Sum of the squares of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_q31( + q31_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + /** + * @brief Sum of the squares of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Sum of the squares of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_q15( + q15_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + /** + * @brief Sum of the squares of the elements of a Q7 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_power_q7( + q7_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Mean value of a Q7 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_mean_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * pResult); + + /** + * @brief Mean value of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + void arm_mean_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + /** + * @brief Mean value of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + void arm_mean_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Mean value of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + void arm_mean_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Variance of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_var_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Variance of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_var_q31( + q31_t * pSrc, + uint32_t blockSize, + q63_t * pResult); + + /** + * @brief Variance of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_var_q15( + q15_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Root Mean Square of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_rms_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Root Mean Square of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_rms_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Root Mean Square of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_rms_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + /** + * @brief Standard deviation of the elements of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_std_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult); + + /** + * @brief Standard deviation of the elements of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_std_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult); + + /** + * @brief Standard deviation of the elements of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output value. + * @return none. + */ + + void arm_std_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult); + + /** + * @brief Floating-point complex magnitude + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_f32( + float32_t * pSrc, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex magnitude + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_q31( + q31_t * pSrc, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex magnitude + * @param[in] *pSrc points to the complex input vector + * @param[out] *pDst points to the real output vector + * @param[in] numSamples number of complex samples in the input vector + * @return none. + */ + + void arm_cmplx_mag_q15( + q15_t * pSrc, + q15_t * pDst, + uint32_t numSamples); + + /** + * @brief Q15 complex dot product + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] *realResult real part of the result returned here + * @param[out] *imagResult imaginary part of the result returned here + * @return none. + */ + + void arm_cmplx_dot_prod_q15( + q15_t * pSrcA, + q15_t * pSrcB, + uint32_t numSamples, + q31_t * realResult, + q31_t * imagResult); + + /** + * @brief Q31 complex dot product + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] *realResult real part of the result returned here + * @param[out] *imagResult imaginary part of the result returned here + * @return none. + */ + + void arm_cmplx_dot_prod_q31( + q31_t * pSrcA, + q31_t * pSrcB, + uint32_t numSamples, + q63_t * realResult, + q63_t * imagResult); + + /** + * @brief Floating-point complex dot product + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[in] numSamples number of complex samples in each vector + * @param[out] *realResult real part of the result returned here + * @param[out] *imagResult imaginary part of the result returned here + * @return none. + */ + + void arm_cmplx_dot_prod_f32( + float32_t * pSrcA, + float32_t * pSrcB, + uint32_t numSamples, + float32_t * realResult, + float32_t * imagResult); + + /** + * @brief Q15 complex-by-real multiplication + * @param[in] *pSrcCmplx points to the complex input vector + * @param[in] *pSrcReal points to the real input vector + * @param[out] *pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + * @return none. + */ + + void arm_cmplx_mult_real_q15( + q15_t * pSrcCmplx, + q15_t * pSrcReal, + q15_t * pCmplxDst, + uint32_t numSamples); + + /** + * @brief Q31 complex-by-real multiplication + * @param[in] *pSrcCmplx points to the complex input vector + * @param[in] *pSrcReal points to the real input vector + * @param[out] *pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + * @return none. + */ + + void arm_cmplx_mult_real_q31( + q31_t * pSrcCmplx, + q31_t * pSrcReal, + q31_t * pCmplxDst, + uint32_t numSamples); + + /** + * @brief Floating-point complex-by-real multiplication + * @param[in] *pSrcCmplx points to the complex input vector + * @param[in] *pSrcReal points to the real input vector + * @param[out] *pCmplxDst points to the complex output vector + * @param[in] numSamples number of samples in each vector + * @return none. + */ + + void arm_cmplx_mult_real_f32( + float32_t * pSrcCmplx, + float32_t * pSrcReal, + float32_t * pCmplxDst, + uint32_t numSamples); + + /** + * @brief Minimum value of a Q7 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *result is output pointer + * @param[in] index is the array index of the minimum value in the input buffer. + * @return none. + */ + + void arm_min_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * result, + uint32_t * index); + + /** + * @brief Minimum value of a Q15 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output pointer + * @param[in] *pIndex is the array index of the minimum value in the input buffer. + * @return none. + */ + + void arm_min_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult, + uint32_t * pIndex); + + /** + * @brief Minimum value of a Q31 vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output pointer + * @param[out] *pIndex is the array index of the minimum value in the input buffer. + * @return none. + */ + void arm_min_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult, + uint32_t * pIndex); + + /** + * @brief Minimum value of a floating-point vector. + * @param[in] *pSrc is input pointer + * @param[in] blockSize is the number of samples to process + * @param[out] *pResult is output pointer + * @param[out] *pIndex is the array index of the minimum value in the input buffer. + * @return none. + */ + + void arm_min_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a Q7 vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_q7( + q7_t * pSrc, + uint32_t blockSize, + q7_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a Q15 vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_q15( + q15_t * pSrc, + uint32_t blockSize, + q15_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a Q31 vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_q31( + q31_t * pSrc, + uint32_t blockSize, + q31_t * pResult, + uint32_t * pIndex); + +/** + * @brief Maximum value of a floating-point vector. + * @param[in] *pSrc points to the input buffer + * @param[in] blockSize length of the input vector + * @param[out] *pResult maximum value returned here + * @param[out] *pIndex index of maximum value returned here + * @return none. + */ + + void arm_max_f32( + float32_t * pSrc, + uint32_t blockSize, + float32_t * pResult, + uint32_t * pIndex); + + /** + * @brief Q15 complex-by-complex multiplication + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_mult_cmplx_q15( + q15_t * pSrcA, + q15_t * pSrcB, + q15_t * pDst, + uint32_t numSamples); + + /** + * @brief Q31 complex-by-complex multiplication + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_mult_cmplx_q31( + q31_t * pSrcA, + q31_t * pSrcB, + q31_t * pDst, + uint32_t numSamples); + + /** + * @brief Floating-point complex-by-complex multiplication + * @param[in] *pSrcA points to the first input vector + * @param[in] *pSrcB points to the second input vector + * @param[out] *pDst points to the output vector + * @param[in] numSamples number of complex samples in each vector + * @return none. + */ + + void arm_cmplx_mult_cmplx_f32( + float32_t * pSrcA, + float32_t * pSrcB, + float32_t * pDst, + uint32_t numSamples); + + /** + * @brief Converts the elements of the floating-point vector to Q31 vector. + * @param[in] *pSrc points to the floating-point input vector + * @param[out] *pDst points to the Q31 output vector + * @param[in] blockSize length of the input vector + * @return none. + */ + void arm_float_to_q31( + float32_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the floating-point vector to Q15 vector. + * @param[in] *pSrc points to the floating-point input vector + * @param[out] *pDst points to the Q15 output vector + * @param[in] blockSize length of the input vector + * @return none + */ + void arm_float_to_q15( + float32_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the floating-point vector to Q7 vector. + * @param[in] *pSrc points to the floating-point input vector + * @param[out] *pDst points to the Q7 output vector + * @param[in] blockSize length of the input vector + * @return none + */ + void arm_float_to_q7( + float32_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q31 vector to Q15 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q31_to_q15( + q31_t * pSrc, + q15_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the Q31 vector to Q7 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q31_to_q7( + q31_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + /** + * @brief Converts the elements of the Q15 vector to floating-point vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q15_to_float( + q15_t * pSrc, + float32_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q15 vector to Q31 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q15_to_q31( + q15_t * pSrc, + q31_t * pDst, + uint32_t blockSize); + + + /** + * @brief Converts the elements of the Q15 vector to Q7 vector. + * @param[in] *pSrc is input pointer + * @param[out] *pDst is output pointer + * @param[in] blockSize is the number of samples to process + * @return none. + */ + void arm_q15_to_q7( + q15_t * pSrc, + q7_t * pDst, + uint32_t blockSize); + + + /** + * @ingroup groupInterpolation + */ + + /** + * @defgroup BilinearInterpolate Bilinear Interpolation + * + * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid. + * The underlying function f(x, y) is sampled on a regular grid and the interpolation process + * determines values between the grid points. + * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension. + * Bilinear interpolation is often used in image processing to rescale images. + * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types. + * + * Algorithm + * \par + * The instance structure used by the bilinear interpolation functions describes a two dimensional data table. + * For floating-point, the instance structure is defined as: + * 
+   *   typedef struct
+   *   {
+   *     uint16_t numRows;
+   *     uint16_t numCols;
+   *     float32_t *pData;
+   * } arm_bilinear_interp_instance_f32;
+   *
+ * + * \par + * where numRows specifies the number of rows in the table; + * numCols specifies the number of columns in the table; + * and pData points to an array of size numRows*numCols values. + * The data table pTable is organized in row order and the supplied data values fall on integer indexes. + * That is, table element (x,y) is located at pTable[x + y*numCols] where x and y are integers. + * + * \par + * Let (x, y) specify the desired interpolation point. Then define: + * 
+   *     XF = floor(x)
+   *     YF = floor(y)
+   *
+ * \par + * The interpolated output point is computed as: + * 
+   *  f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+   *           + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+   *           + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+   *           + f(XF+1, YF+1) * (x-XF)*(y-YF)
+   *
+ * Note that the coordinates (x, y) contain integer and fractional components. + * The integer components specify which portion of the table to use while the + * fractional components control the interpolation processor. + * + * \par + * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output. + */ + + /** + * @addtogroup BilinearInterpolate + * @{ + */ + + /** + * + * @brief Floating-point bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate. + * @param[in] Y interpolation coordinate. + * @return out interpolated value. + */ + + + static __INLINE float32_t arm_bilinear_interp_f32( + const arm_bilinear_interp_instance_f32 * S, + float32_t X, + float32_t Y) + { + float32_t out; + float32_t f00, f01, f10, f11; + float32_t *pData = S->pData; + int32_t xIndex, yIndex, index; + float32_t xdiff, ydiff; + float32_t b1, b2, b3, b4; + + xIndex = (int32_t) X; + yIndex = (int32_t) Y; + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 + || yIndex > (S->numCols - 1)) + { + return (0); + } + + /* Calculation of index for two nearest points in X-direction */ + index = (xIndex - 1) + (yIndex - 1) * S->numCols; + + + /* Read two nearest points in X-direction */ + f00 = pData[index]; + f01 = pData[index + 1]; + + /* Calculation of index for two nearest points in Y-direction */ + index = (xIndex - 1) + (yIndex) * S->numCols; + + + /* Read two nearest points in Y-direction */ + f10 = pData[index]; + f11 = pData[index + 1]; + + /* Calculation of intermediate values */ + b1 = f00; + b2 = f01 - f00; + b3 = f10 - f00; + b4 = f00 - f01 - f10 + f11; + + /* Calculation of fractional part in X */ + xdiff = X - xIndex; + + /* Calculation of fractional part in Y */ + ydiff = Y - yIndex; + + /* Calculation of bi-linear interpolated output */ + out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff; + + /* return to application */ + return (out); + + } + + /** + * + * @brief Q31 bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + + static __INLINE q31_t arm_bilinear_interp_q31( + arm_bilinear_interp_instance_q31 * S, + q31_t X, + q31_t Y) + { + q31_t out; /* Temporary output */ + q31_t acc = 0; /* output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q31_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q31_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20u); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20u); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* shift left xfract by 11 to keep 1.31 format */ + xfract = (X & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + /* 20 bits for the fractional part */ + /* shift left yfract by 11 to keep 1.31 format */ + yfract = (Y & 0x000FFFFF) << 11u; + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */ + out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32)); + acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32)); + + /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (xfract) >> 32)); + + /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); + + /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */ + out = ((q31_t) ((q63_t) y2 * (xfract) >> 32)); + acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); + + /* Convert acc to 1.31(q31) format */ + return (acc << 2u); + + } + + /** + * @brief Q15 bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + + static __INLINE q15_t arm_bilinear_interp_q15( + arm_bilinear_interp_instance_q15 * S, + q31_t X, + q31_t Y) + { + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q15_t x1, x2, y1, y2; /* Nearest output values */ + q31_t xfract, yfract; /* X, Y fractional parts */ + int32_t rI, cI; /* Row and column indices */ + q15_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & 0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */ + + /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */ + /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */ + out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u); + acc = ((q63_t) out * (0xFFFFF - yfract)); + + /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u); + acc += ((q63_t) out * (xfract)); + + /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u); + acc += ((q63_t) out * (yfract)); + + /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */ + out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u); + acc += ((q63_t) out * (yfract)); + + /* acc is in 13.51 format and down shift acc by 36 times */ + /* Convert out to 1.15 format */ + return (acc >> 36); + + } + + /** + * @brief Q7 bilinear interpolation. + * @param[in,out] *S points to an instance of the interpolation structure. + * @param[in] X interpolation coordinate in 12.20 format. + * @param[in] Y interpolation coordinate in 12.20 format. + * @return out interpolated value. + */ + + static __INLINE q7_t arm_bilinear_interp_q7( + arm_bilinear_interp_instance_q7 * S, + q31_t X, + q31_t Y) + { + q63_t acc = 0; /* output */ + q31_t out; /* Temporary output */ + q31_t xfract, yfract; /* X, Y fractional parts */ + q7_t x1, x2, y1, y2; /* Nearest output values */ + int32_t rI, cI; /* Row and column indices */ + q7_t *pYData = S->pData; /* pointer to output table values */ + uint32_t nCols = S->numCols; /* num of rows */ + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + rI = ((X & 0xFFF00000) >> 20); + + /* Input is in 12.20 format */ + /* 12 bits for the table index */ + /* Index value calculation */ + cI = ((Y & 0xFFF00000) >> 20); + + /* Care taken for table outside boundary */ + /* Returns zero output when values are outside table boundary */ + if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) + { + return (0); + } + + /* 20 bits for the fractional part */ + /* xfract should be in 12.20 format */ + xfract = (X & 0x000FFFFF); + + /* Read two nearest output values from the index */ + x1 = pYData[(rI) + nCols * (cI)]; + x2 = pYData[(rI) + nCols * (cI) + 1u]; + + + /* 20 bits for the fractional part */ + /* yfract should be in 12.20 format */ + yfract = (Y & 0x000FFFFF); + + /* Read two nearest output values from the index */ + y1 = pYData[(rI) + nCols * (cI + 1)]; + y2 = pYData[(rI) + nCols * (cI + 1) + 1u]; + + /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */ + out = ((x1 * (0xFFFFF - xfract))); + acc = (((q63_t) out * (0xFFFFF - yfract))); + + /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */ + out = ((x2 * (0xFFFFF - yfract))); + acc += (((q63_t) out * (xfract))); + + /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y1 * (0xFFFFF - xfract))); + acc += (((q63_t) out * (yfract))); + + /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */ + out = ((y2 * (yfract))); + acc += (((q63_t) out * (xfract))); + + /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */ + return (acc >> 40); + + } + + /** + * @} end of BilinearInterpolate group + */ + + +#if defined ( __CC_ARM ) //Keil +//SMMLAR + #define multAcc_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32) + +//SMMLSR + #define multSub_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32) + +//SMMULR + #define mult_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32) + +//Enter low optimization region - place directly above function definition + #define LOW_OPTIMIZATION_ENTER \ + _Pragma ("push") \ + _Pragma ("O1") + +//Exit low optimization region - place directly after end of function definition + #define LOW_OPTIMIZATION_EXIT \ + _Pragma ("pop") + +//Enter low optimization region - place directly above function definition + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + +//Exit low optimization region - place directly after end of function definition + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined(__ICCARM__) //IAR + //SMMLA + #define multAcc_32x32_keep32_R(a, x, y) \ + a += (q31_t) (((q63_t) x * y) >> 32) + + //SMMLS + #define multSub_32x32_keep32_R(a, x, y) \ + a -= (q31_t) (((q63_t) x * y) >> 32) + +//SMMUL + #define mult_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((q63_t) x * y ) >> 32) + +//Enter low optimization region - place directly above function definition + #define LOW_OPTIMIZATION_ENTER \ + _Pragma ("optimize=low") + +//Exit low optimization region - place directly after end of function definition + #define LOW_OPTIMIZATION_EXIT + +//Enter low optimization region - place directly above function definition + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \ + _Pragma ("optimize=low") + +//Exit low optimization region - place directly after end of function definition + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined(__GNUC__) + //SMMLA + #define multAcc_32x32_keep32_R(a, x, y) \ + a += (q31_t) (((q63_t) x * y) >> 32) + + //SMMLS + #define multSub_32x32_keep32_R(a, x, y) \ + a -= (q31_t) (((q63_t) x * y) >> 32) + +//SMMUL + #define mult_32x32_keep32_R(a, x, y) \ + a = (q31_t) (((q63_t) x * y ) >> 32) + + #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") )) + + #define LOW_OPTIMIZATION_EXIT + + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#endif + + + + + +#ifdef __cplusplus +} +#endif + + +#endif /* _ARM_MATH_H */ + + +/** + * + * End of file. + */ diff --git a/libraries/CMSIS/Include/core_cm0.h b/libraries/CMSIS/Include/core_cm0.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_cm0.h @@ -0,0 +1,682 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup Cortex_M0 + @{ + */ + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x00) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000 + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31]; + __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31]; + __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31]; + __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31]; + uint32_t RESERVED4[64]; + __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) + are only accessible over DAP and not via processor. Therefore + they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M0 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 ) +#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) ) +#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) ) + + +/** \brief Enable External Interrupt + + The function enables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Disable External Interrupt + + The function disables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Get Pending Interrupt + + The function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + + +/** \brief Set Pending Interrupt + + The function sets the pending bit of an external interrupt. + + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Clear Pending Interrupt + + The function clears the pending bit of an external interrupt. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Set Interrupt Priority + + The function sets the priority of an interrupt. + + \note The priority cannot be set for every core interrupt. + + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } + else { + NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } +} + + +/** \brief Get Interrupt Priority + + The function reads the priority of an interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented + priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */ + else { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief System Reset + + The function initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + The function initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + + \param [in] ticks Number of ticks between two interrupts. + + \return 0 Function succeeded. + \return 1 Function failed. + + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/libraries/CMSIS/Include/core_cm0plus.h b/libraries/CMSIS/Include/core_cm0plus.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,793 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup Cortex-M0+ + @{ + */ + +/* CMSIS CM0P definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \ + __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x00) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000 + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0 + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31]; + __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31]; + __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31]; + __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31]; + uint32_t RESERVED4[64]; + __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if (__VTOR_PRESENT == 1) + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if (__VTOR_PRESENT == 1) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) + are only accessible over DAP and not via processor. Therefore + they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M0+ Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 ) +#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) ) +#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) ) + + +/** \brief Enable External Interrupt + + The function enables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Disable External Interrupt + + The function disables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Get Pending Interrupt + + The function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + + +/** \brief Set Pending Interrupt + + The function sets the pending bit of an external interrupt. + + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Clear Pending Interrupt + + The function clears the pending bit of an external interrupt. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Set Interrupt Priority + + The function sets the priority of an interrupt. + + \note The priority cannot be set for every core interrupt. + + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } + else { + NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } +} + + +/** \brief Get Interrupt Priority + + The function reads the priority of an interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented + priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */ + else { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief System Reset + + The function initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + The function initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + + \param [in] ticks Number of ticks between two interrupts. + + \return 0 Function succeeded. + \return 1 Function failed. + + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/libraries/CMSIS/Include/core_cm3.h b/libraries/CMSIS/Include/core_cm3.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_cm3.h @@ -0,0 +1,1627 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup Cortex_M3 + @{ + */ + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI__VFP_SUPPORT____ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200 + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if (__CM3_REV < 0x0201) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1]; + __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1]; + __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1]; + __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2]; + __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55]; + __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131]; + __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759]; + __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1]; + __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39]; + __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8]; + __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** \brief Set Priority Grouping + + The function sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** \brief Get Priority Grouping + + The function reads the priority grouping field from the NVIC Interrupt Controller. + + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + + +/** \brief Enable External Interrupt + + The function enables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + + +/** \brief Disable External Interrupt + + The function disables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + + +/** \brief Get Pending Interrupt + + The function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + + +/** \brief Set Pending Interrupt + + The function sets the pending bit of an external interrupt. + + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + + +/** \brief Clear Pending Interrupt + + The function clears the pending bit of an external interrupt. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Get Active Interrupt + + The function reads the active register in NVIC and returns the active bit. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + + +/** \brief Set Interrupt Priority + + The function sets the priority of an interrupt. + + \note The priority cannot be set for every core interrupt. + + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + + +/** \brief Get Interrupt Priority + + The function reads the priority of an interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented + priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief Encode Priority + + The function encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set. + + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** \brief Decode Priority + + The function decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + +/** \brief System Reset + + The function initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + The function initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + + \param [in] ticks Number of ticks between two interrupts. + + \return 0 Function succeeded. + \return 1 Function failed. + + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** \brief ITM Send Character + + The function transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + + \param [in] ch Character to transmit. + + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** \brief ITM Receive Character + + The function inputs a character via the external variable \ref ITM_RxBuffer. + + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) { + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** \brief ITM Check Character + + The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/libraries/CMSIS/Include/core_cm4.h b/libraries/CMSIS/Include/core_cm4.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_cm4.h @@ -0,0 +1,1772 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup Cortex_M4 + @{ + */ + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x04) /*!< Cortex-M Core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __TMS470__ ) + #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif + +#elif defined ( __TMS470__ ) + #if defined __TI_VFP_SUPPORT__ + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if (__FPU_PRESENT == 1) + #define __FPU_USED 1 + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0 + #endif + #else + #define __FPU_USED 0 + #endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ +#include /* Compiler specific SIMD Intrinsics */ + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000 + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0 + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1]; + __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1]; + __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1]; + __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2]; + __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55]; + __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131]; + __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759]; + __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1]; + __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39]; + __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8]; + __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if (__FPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register */ +#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register */ +#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register */ +#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M4 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#if (__FPU_PRESENT == 1) + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** \brief Set Priority Grouping + + The function sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** \brief Get Priority Grouping + + The function reads the priority grouping field from the NVIC Interrupt Controller. + + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + + +/** \brief Enable External Interrupt + + The function enables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ +/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */ + NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */ +} + + +/** \brief Disable External Interrupt + + The function disables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + + +/** \brief Get Pending Interrupt + + The function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + + +/** \brief Set Pending Interrupt + + The function sets the pending bit of an external interrupt. + + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + + +/** \brief Clear Pending Interrupt + + The function clears the pending bit of an external interrupt. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Get Active Interrupt + + The function reads the active register in NVIC and returns the active bit. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + + +/** \brief Set Interrupt Priority + + The function sets the priority of an interrupt. + + \note The priority cannot be set for every core interrupt. + + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + + +/** \brief Get Interrupt Priority + + The function reads the priority of an interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented + priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief Encode Priority + + The function encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set. + + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** \brief Decode Priority + + The function decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + +/** \brief System Reset + + The function initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + The function initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + + \param [in] ticks Number of ticks between two interrupts. + + \return 0 Function succeeded. + \return 1 Function failed. + + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** \brief ITM Send Character + + The function transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + + \param [in] ch Character to transmit. + + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** \brief ITM Receive Character + + The function inputs a character via the external variable \ref ITM_RxBuffer. + + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) { + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** \brief ITM Check Character + + The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/libraries/CMSIS/Include/core_cm4_simd.h b/libraries/CMSIS/Include/core_cm4_simd.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_cm4_simd.h @@ -0,0 +1,673 @@ +/**************************************************************************//** + * @file core_cm4_simd.h + * @brief CMSIS Cortex-M4 SIMD Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_CM4_SIMD_H +#define __CORE_CM4_SIMD_H + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/ +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32) ) >> 32)) + +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/ +#include + +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + + +#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +/* TI CCS specific functions */ + +/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/ +#include + +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SMLALD(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +#define __SMLALDX(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SMLSLD(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +#define __SMLSLDX(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \ + (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \ + }) + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ + + +/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/ +/* not yet supported */ +/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/ + + +#endif + +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CORE_CM4_SIMD_H */ + +#ifdef __cplusplus +} +#endif diff --git a/libraries/CMSIS/Include/core_cmFunc.h b/libraries/CMSIS/Include/core_cmFunc.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_cmFunc.h @@ -0,0 +1,636 @@ +/**************************************************************************//** + * @file core_cmFunc.h + * @brief CMSIS Cortex-M Core Function Access Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CORE_CMFUNC_H +#define __CORE_CMFUNC_H + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#if (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + +/** \brief Get Control Register + + This function returns the content of the Control Register. + + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** \brief Set Control Register + + This function writes the given value to the Control Register. + + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** \brief Get IPSR Register + + This function returns the content of the IPSR Register. + + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** \brief Get APSR Register + + This function returns the content of the APSR Register. + + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** \brief Get xPSR Register + + This function returns the content of the xPSR Register. + + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** \brief Get Process Stack Pointer + + This function returns the current value of the Process Stack Pointer (PSP). + + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** \brief Set Process Stack Pointer + + This function assigns the given value to the Process Stack Pointer (PSP). + + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** \brief Get Main Stack Pointer + + This function returns the current value of the Main Stack Pointer (MSP). + + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** \brief Set Main Stack Pointer + + This function assigns the given value to the Main Stack Pointer (MSP). + + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** \brief Get Priority Mask + + This function returns the current state of the priority mask bit from the Priority Mask Register. + + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** \brief Set Priority Mask + + This function assigns the given value to the Priority Mask Register. + + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Enable FIQ + + This function enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** \brief Disable FIQ + + This function disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** \brief Get Base Priority + + This function returns the current value of the Base Priority register. + + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** \brief Set Base Priority + + This function assigns the given value to the Base Priority register. + + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + + +/** \brief Get Fault Mask + + This function returns the current value of the Fault Mask register. + + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** \brief Set Fault Mask + + This function assigns the given value to the Fault Mask register. + + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + +#if (__CORTEX_M == 0x04) + +/** \brief Get FPSCR + + This function returns the current value of the Floating Point Status/Control register. + + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0); +#endif +} + + +/** \brief Set FPSCR + + This function assigns the given value to the Floating Point Status/Control register. + + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#endif +} + +#endif /* (__CORTEX_M == 0x04) */ + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#include + + +#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +/* TI CCS specific functions */ + +#include + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** \brief Enable IRQ Interrupts + + This function enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** \brief Disable IRQ Interrupts + + This function disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** \brief Get Control Register + + This function returns the content of the Control Register. + + \return Control Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +/** \brief Set Control Register + + This function writes the given value to the Control Register. + + \param [in] control Control Register value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +/** \brief Get IPSR Register + + This function returns the content of the IPSR Register. + + \return IPSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get APSR Register + + This function returns the content of the APSR Register. + + \return APSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get xPSR Register + + This function returns the content of the xPSR Register. + + \return xPSR Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** \brief Get Process Stack Pointer + + This function returns the current value of the Process Stack Pointer (PSP). + + \return PSP Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, psp\n" : "=r" (result) ); + return(result); +} + + +/** \brief Set Process Stack Pointer + + This function assigns the given value to the Process Stack Pointer (PSP). + + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp"); +} + + +/** \brief Get Main Stack Pointer + + This function returns the current value of the Main Stack Pointer (MSP). + + \return MSP Register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t result; + + __ASM volatile ("MRS %0, msp\n" : "=r" (result) ); + return(result); +} + + +/** \brief Set Main Stack Pointer + + This function assigns the given value to the Main Stack Pointer (MSP). + + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp"); +} + + +/** \brief Get Priority Mask + + This function returns the current state of the priority mask bit from the Priority Mask Register. + + \return Priority Mask value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +/** \brief Set Priority Mask + + This function assigns the given value to the Priority Mask Register. + + \param [in] priMask Priority Mask + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Enable FIQ + + This function enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** \brief Disable FIQ + + This function disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** \brief Get Base Priority + + This function returns the current value of the Base Priority register. + + \return Base Priority register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + + +/** \brief Set Base Priority + + This function assigns the given value to the Base Priority register. + + \param [in] basePri Base Priority value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory"); +} + + +/** \brief Get Fault Mask + + This function returns the current value of the Fault Mask register. + + \return Fault Mask register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +/** \brief Set Fault Mask + + This function assigns the given value to the Fault Mask register. + + \param [in] faultMask Fault Mask value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + +#if (__CORTEX_M == 0x04) + +/** \brief Get FPSCR + + This function returns the current value of the Floating Point Status/Control register. + + \return Floating Point Status/Control register value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + uint32_t result; + + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile (""); + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + __ASM volatile (""); + return(result); +#else + return(0); +#endif +} + + +/** \brief Set FPSCR + + This function assigns the given value to the Floating Point Status/Control register. + + \param [in] fpscr Floating Point Status/Control value to set + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + /* Empty asm statement works as a scheduling barrier */ + __ASM volatile (""); + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc"); + __ASM volatile (""); +#endif +} + +#endif /* (__CORTEX_M == 0x04) */ + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +#endif /* __CORE_CMFUNC_H */ diff --git a/libraries/CMSIS/Include/core_cmInstr.h b/libraries/CMSIS/Include/core_cmInstr.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_cmInstr.h @@ -0,0 +1,688 @@ +/**************************************************************************//** + * @file core_cmInstr.h + * @brief CMSIS Cortex-M Core Instruction Access Header File + * @version V3.20 + * @date 05. March 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#ifndef __CORE_CMINSTR_H +#define __CORE_CMINSTR_H + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#if (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +#define __ISB() __isb(0xF) + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __dsb(0xF) + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __dmb(0xF) + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** \brief Rotate Right in unsigned value (32 bit) + + This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** \brief Breakpoint + + This function causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +#if (__CORTEX_M >= 0x03) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __rbit + + +/** \brief LDR Exclusive (8 bit) + + This function performs a exclusive LDR command for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) + + +/** \brief LDR Exclusive (16 bit) + + This function performs a exclusive LDR command for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) + + +/** \brief LDR Exclusive (32 bit) + + This function performs a exclusive LDR command for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) + + +/** \brief STR Exclusive (8 bit) + + This function performs a exclusive STR command for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (16 bit) + + This function performs a exclusive STR command for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (32 bit) + + This function performs a exclusive STR command for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW(value, ptr) __strex(value, ptr) + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +#define __CLREX __clrex + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + +#endif /* (__CORTEX_M >= 0x03) */ + + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#include + + +#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +/* TI CCS specific functions */ + +#include + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constrant "l" + * Otherwise, use general registers, specified by constrant "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void) +{ + __ASM volatile ("nop"); +} + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void) +{ + __ASM volatile ("wfi"); +} + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void) +{ + __ASM volatile ("wfe"); +} + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void) +{ + __ASM volatile ("sev"); +} + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void) +{ + __ASM volatile ("isb"); +} + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void) +{ + __ASM volatile ("dsb"); +} + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void) +{ + __ASM volatile ("dmb"); +} + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +#endif +} + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (short)__builtin_bswap16(value); +#else + uint32_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +#endif +} + + +/** \brief Rotate Right in unsigned value (32 bit) + + This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + return (op1 >> op2) | (op1 << (32 - op2)); +} + + +/** \brief Breakpoint + + This function causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +#if (__CORTEX_M >= 0x03) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief LDR Exclusive (8 bit) + + This function performs a exclusive LDR command for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return(result); +} + + +/** \brief LDR Exclusive (16 bit) + + This function performs a exclusive LDR command for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return(result); +} + + +/** \brief LDR Exclusive (32 bit) + + This function performs a exclusive LDR command for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** \brief STR Exclusive (8 bit) + + This function performs a exclusive STR command for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** \brief STR Exclusive (16 bit) + + This function performs a exclusive STR command for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** \brief STR Exclusive (32 bit) + + This function performs a exclusive STR command for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +#endif + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + +#endif /* __CORE_CMINSTR_H */ diff --git a/libraries/CMSIS/Include/core_sc000.h b/libraries/CMSIS/Include/core_sc000.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_sc000.h @@ -0,0 +1,813 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup SC000 + @{ + */ + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_SC (0) /*!< Cortex secure core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000 + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31]; + __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31]; + __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31]; + __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31]; + uint32_t RESERVED4[64]; + __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1]; + __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154]; + __IO uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/* SCB Security Features Register Definitions */ +#define SCB_SFCR_UNIBRTIMING_Pos 0 /*!< SCB SFCR: UNIBRTIMING Position */ +#define SCB_SFCR_UNIBRTIMING_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SFCR: UNIBRTIMING Mask */ + +#define SCB_SFCR_SECKEY_Pos 16 /*!< SCB SFCR: SECKEY Position */ +#define SCB_SFCR_SECKEY_Msk (0xFFFFUL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SFCR: SECKEY Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2]; + __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) + are only accessible over DAP and not via processor. Therefore + they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of SC000 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/* Interrupt Priorities are WORD accessible only under ARMv6M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 ) +#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) ) +#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) ) + + +/** \brief Enable External Interrupt + + The function enables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Disable External Interrupt + + The function disables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Get Pending Interrupt + + The function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + + +/** \brief Set Pending Interrupt + + The function sets the pending bit of an external interrupt. + + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + + +/** \brief Clear Pending Interrupt + + The function clears the pending bit of an external interrupt. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Set Interrupt Priority + + The function sets the priority of an interrupt. + + \note The priority cannot be set for every core interrupt. + + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } + else { + NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) | + (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); } +} + + +/** \brief Get Interrupt Priority + + The function reads the priority of an interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented + priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */ + else { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief System Reset + + The function initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + The function initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + + \param [in] ticks Number of ticks between two interrupts. + + \return 0 Function succeeded. + \return 1 Function failed. + + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/libraries/CMSIS/Include/core_sc300.h b/libraries/CMSIS/Include/core_sc300.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/Include/core_sc300.h @@ -0,0 +1,1598 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V3.20 + * @date 25. February 2013 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2013 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** \ingroup SC3000 + @{ + */ + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ + +#define __CORTEX_SC (300) /*!< Cortex secure core */ + + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + #define __STATIC_INLINE static __inline + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ + #define __STATIC_INLINE static inline + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + #define __STATIC_INLINE static inline + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + #define __STATIC_INLINE static inline + +#endif + +/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all +*/ +#define __FPU_USED 0 + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif +#endif + +#include /* standard types definitions */ +#include /* Core Instruction Access */ +#include /* Core Function Access */ + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000 + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0 + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0 + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ +#else + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ +#endif + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + + +/** \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + + +/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ +#if (__CORTEX_M != 0x04) + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ +#else + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ +#endif + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + + +/** \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/*@} end of group CMSIS_CORE */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5]; + __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1]; + __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + uint32_t RESERVED1[1]; +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1]; + __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1]; + __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1]; + __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2]; + __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55]; + __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131]; + __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759]; + __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1]; + __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39]; + __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8]; + __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if (__MPU_PRESENT == 1) +/** \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +/** \brief Set Priority Grouping + + The function sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** \brief Get Priority Grouping + + The function reads the priority grouping field from the NVIC Interrupt Controller. + + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + + +/** \brief Enable External Interrupt + + The function enables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + + +/** \brief Disable External Interrupt + + The function disables a device-specific interrupt in the NVIC interrupt controller. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + + +/** \brief Get Pending Interrupt + + The function reads the pending register in the NVIC and returns the pending bit + for the specified interrupt. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + */ +__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + + +/** \brief Set Pending Interrupt + + The function sets the pending bit of an external interrupt. + + \param [in] IRQn Interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + + +/** \brief Clear Pending Interrupt + + The function clears the pending bit of an external interrupt. + + \param [in] IRQn External interrupt number. Value cannot be negative. + */ +__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + + +/** \brief Get Active Interrupt + + The function reads the active register in NVIC and returns the active bit. + + \param [in] IRQn Interrupt number. + + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + */ +__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + + +/** \brief Set Interrupt Priority + + The function sets the priority of an interrupt. + + \note The priority cannot be set for every core interrupt. + + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + */ +__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + + +/** \brief Get Interrupt Priority + + The function reads the priority of an interrupt. The interrupt + number can be positive to specify an external (device specific) + interrupt, or negative to specify an internal (core) interrupt. + + + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented + priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** \brief Encode Priority + + The function encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set. + + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** \brief Decode Priority + + The function decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + +/** \brief System Reset + + The function initiates a system reset request to reset the MCU. + */ +__STATIC_INLINE void NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if (__Vendor_SysTickConfig == 0) + +/** \brief System Tick Configuration + + The function initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + + \param [in] ticks Number of ticks between two interrupts. + + \return 0 Function succeeded. + \return 1 Function failed. + + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = ticks - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** \brief ITM Send Character + + The function transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + + \param [in] ch Character to transmit. + + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** \brief ITM Receive Character + + The function inputs a character via the external variable \ref ITM_RxBuffer. + + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) { + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** \brief ITM Check Character + + The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ + +#ifdef __cplusplus +} +#endif diff --git a/libraries/CMSIS/README.txt b/libraries/CMSIS/README.txt new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/README.txt @@ -0,0 +1,37 @@ +* ------------------------------------------------------------------- +* Copyright (C) 2011-2013 ARM Limited. All rights reserved. +* +* Date: 18 March 2013 +* Revision: V3.20 +* +* Project: Cortex Microcontroller Software Interface Standard (CMSIS) +* Title: Release Note for CMSIS +* +* ------------------------------------------------------------------- + + +NOTE - Open the index.html file to access CMSIS documentation + + +The Cortex Microcontroller Software Interface Standard (CMSIS) provides a single standard across all +Cortex-Mx processor series vendors. It enables code re-use and code sharing across software projects +and reduces time-to-market for new embedded applications. + +CMSIS is released under the terms of the end user license agreement ("CMSIS END USER LICENCE AGREEMENT.pdf"). +Any user of the software package is bound to the terms and conditions of the end user license agreement. + + +You will find the following sub-directories: + +Documentation - Contains CMSIS documentation. + +DSP_Lib - MDK project files, Examples and source files etc.. to build the + CMSIS DSP Software Library for Cortex-M0, Cortex-M3, Cortex-M4 processors. + +Include - CMSIS Core Support and CMSIS DSP Include Files. + +Lib - CMSIS DSP Libraries. + +RTOS - CMSIS RTOS API template header file. + +SVD - CMSIS SVD Schema files and Conversion Utility. diff --git a/libraries/CMSIS/RTOS/cmsis_os.h b/libraries/CMSIS/RTOS/cmsis_os.h new file mode 100644 --- /dev/null +++ b/libraries/CMSIS/RTOS/cmsis_os.h @@ -0,0 +1,783 @@ +/* ---------------------------------------------------------------------- + * $Date: 5. February 2013 + * $Revision: V1.02 + * + * Project: CMSIS-RTOS API + * Title: cmsis_os.h template header file + * + * Version 0.02 + * Initial Proposal Phase + * Version 0.03 + * osKernelStart added, optional feature: main started as thread + * osSemaphores have standard behavior + * osTimerCreate does not start the timer, added osTimerStart + * osThreadPass is renamed to osThreadYield + * Version 1.01 + * Support for C++ interface + * - const attribute removed from the osXxxxDef_t typedef's + * - const attribute added to the osXxxxDef macros + * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete + * Added: osKernelInitialize + * Version 1.02 + * Control functions for short timeouts in microsecond resolution: + * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec + * Removed: osSignalGet + *---------------------------------------------------------------------------- + * + * Copyright (c) 2013 ARM LIMITED + * All rights reserved. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * - Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + *---------------------------------------------------------------------------*/ + +/** +\page cmsis_os_h Header File Template: cmsis_os.h + +The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS). +Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents +its implementation. + +The file cmsis_os.h contains: + - CMSIS-RTOS API function definitions + - struct definitions for parameters and return types + - status and priority values used by CMSIS-RTOS API functions + - macros for defining threads and other kernel objects + + +Name conventions and header file modifications + +All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions. +Definitions that are prefixed \b os_ are not used in the application code but local to this header file. +All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread. + +Definitions that are marked with CAN BE CHANGED can be adapted towards the needs of the actual CMSIS-RTOS implementation. +These definitions can be specific to the underlying RTOS kernel. + +Definitions that are marked with MUST REMAIN UNCHANGED cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer +compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation. + + +Function calls from interrupt service routines + +The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR): + - \ref osSignalSet + - \ref osSemaphoreRelease + - \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree + - \ref osMessagePut, \ref osMessageGet + - \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree + +Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called +from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector. + +Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time. +If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive. + + +Define and reference object definitions + +With \#define osObjectsExternal objects are defined as external symbols. This allows to create a consistent header file +that is used throughout a project as shown below: + +Header File +\code +#include // CMSIS RTOS header file + +// Thread definition +extern void thread_sample (void const *argument); // function prototype +osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100); + +// Pool definition +osPoolDef(MyPool, 10, long); +\endcode + + +This header file defines all objects when included in a C/C++ source file. When \#define osObjectsExternal is +present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be +used throughout the whole project. + +Example +\code +#include "osObjects.h" // Definition of the CMSIS-RTOS objects +\endcode + +\code +#define osObjectExternal // Objects will be defined as external symbols +#include "osObjects.h" // Reference to the CMSIS-RTOS objects +\endcode + +*/ + +#ifndef _CMSIS_OS_H +#define _CMSIS_OS_H + +/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version. +#define osCMSIS 0x10002 ///< API version (main [31:16] .sub [15:0]) + +/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number. +#define osCMSIS_KERNEL 0x10000 ///< RTOS identification and version (main [31:16] .sub [15:0]) + +/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS. +#define osKernelSystemId "KERNEL V1.00" ///< RTOS identification string + +/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS. +#define osFeature_MainThread 1 ///< main thread 1=main can be thread, 0=not available +#define osFeature_Pool 1 ///< Memory Pools: 1=available, 0=not available +#define osFeature_MailQ 1 ///< Mail Queues: 1=available, 0=not available +#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available +#define osFeature_Signals 8 ///< maximum number of Signal Flags available per thread +#define osFeature_Semaphore 30 ///< maximum count for \ref osSemaphoreCreate function +#define osFeature_Wait 1 ///< osWait function: 1=available, 0=not available +#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available + +#include +#include + +#ifdef __cplusplus +extern "C" +{ +#endif + + +// ==== Enumeration, structures, defines ==== + +/// Priority used for thread control. +/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS. +typedef enum { + osPriorityIdle = -3, ///< priority: idle (lowest) + osPriorityLow = -2, ///< priority: low + osPriorityBelowNormal = -1, ///< priority: below normal + osPriorityNormal = 0, ///< priority: normal (default) + osPriorityAboveNormal = +1, ///< priority: above normal + osPriorityHigh = +2, ///< priority: high + osPriorityRealtime = +3, ///< priority: realtime (highest) + osPriorityError = 0x84 ///< system cannot determine priority or thread has illegal priority +} osPriority; + +/// Timeout value. +/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS. +#define osWaitForever 0xFFFFFFFF ///< wait forever timeout value + +/// Status code values returned by CMSIS-RTOS functions. +/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS. +typedef enum { + osOK = 0, ///< function completed; no error or event occurred. + osEventSignal = 0x08, ///< function completed; signal event occurred. + osEventMessage = 0x10, ///< function completed; message event occurred. + osEventMail = 0x20, ///< function completed; mail event occurred. + osEventTimeout = 0x40, ///< function completed; timeout occurred. + osErrorParameter = 0x80, ///< parameter error: a mandatory parameter was missing or specified an incorrect object. + osErrorResource = 0x81, ///< resource not available: a specified resource was not available. + osErrorTimeoutResource = 0xC1, ///< resource not available within given time: a specified resource was not available within the timeout period. + osErrorISR = 0x82, ///< not allowed in ISR context: the function cannot be called from interrupt service routines. + osErrorISRRecursive = 0x83, ///< function called multiple times from ISR with same object. + osErrorPriority = 0x84, ///< system cannot determine priority or thread has illegal priority. + osErrorNoMemory = 0x85, ///< system is out of memory: it was impossible to allocate or reserve memory for the operation. + osErrorValue = 0x86, ///< value of a parameter is out of range. + osErrorOS = 0xFF, ///< unspecified RTOS error: run-time error but no other error message fits. + os_status_reserved = 0x7FFFFFFF ///< prevent from enum down-size compiler optimization. +} osStatus; + + +/// Timer type value for the timer definition. +/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS. +typedef enum { + osTimerOnce = 0, ///< one-shot timer + osTimerPeriodic = 1 ///< repeating timer +} os_timer_type; + +/// Entry point of a thread. +/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS. +typedef void (*os_pthread) (void const *argument); + +/// Entry point of a timer call back function. +/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS. +typedef void (*os_ptimer) (void const *argument); + +// >>> the following data type definitions may shall adapted towards a specific RTOS + +/// Thread ID identifies the thread (pointer to a thread control block). +/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_thread_cb *osThreadId; + +/// Timer ID identifies the timer (pointer to a timer control block). +/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_timer_cb *osTimerId; + +/// Mutex ID identifies the mutex (pointer to a mutex control block). +/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_mutex_cb *osMutexId; + +/// Semaphore ID identifies the semaphore (pointer to a semaphore control block). +/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_semaphore_cb *osSemaphoreId; + +/// Pool ID identifies the memory pool (pointer to a memory pool control block). +/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_pool_cb *osPoolId; + +/// Message ID identifies the message queue (pointer to a message queue control block). +/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_messageQ_cb *osMessageQId; + +/// Mail ID identifies the mail queue (pointer to a mail queue control block). +/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS. +typedef struct os_mailQ_cb *osMailQId; + + +/// Thread Definition structure contains startup information of a thread. +/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS. +typedef struct os_thread_def { + os_pthread pthread; ///< start address of thread function + osPriority tpriority; ///< initial thread priority + uint32_t instances; ///< maximum number of instances of that thread function + uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size +} osThreadDef_t; + +/// Timer Definition structure contains timer parameters. +/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS. +typedef struct os_timer_def { + os_ptimer ptimer; ///< start address of a timer function +} osTimerDef_t; + +/// Mutex Definition structure contains setup information for a mutex. +/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS. +typedef struct os_mutex_def { + uint32_t dummy; ///< dummy value. +} osMutexDef_t; + +/// Semaphore Definition structure contains setup information for a semaphore. +/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS. +typedef struct os_semaphore_def { + uint32_t dummy; ///< dummy value. +} osSemaphoreDef_t; + +/// Definition structure for memory block allocation. +/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS. +typedef struct os_pool_def { + uint32_t pool_sz; ///< number of items (elements) in the pool + uint32_t item_sz; ///< size of an item + void *pool; ///< pointer to memory for pool +} osPoolDef_t; + +/// Definition structure for message queue. +/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS. +typedef struct os_messageQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item + void *pool; ///< memory array for messages +} osMessageQDef_t; + +/// Definition structure for mail queue. +/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS. +typedef struct os_mailQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item + void *pool; ///< memory array for mail +} osMailQDef_t; + +/// Event structure contains detailed information about an event. +/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS. +/// However the struct may be extended at the end. +typedef struct { + osStatus status; ///< status code: event or error information + union { + uint32_t v; ///< message as 32-bit value + void *p; ///< message or mail as void pointer + int32_t signals; ///< signal flags + } value; ///< event value + union { + osMailQId mail_id; ///< mail id obtained by \ref osMailCreate + osMessageQId message_id; ///< message id obtained by \ref osMessageCreate + } def; ///< event definition +} osEvent; + + +// ==== Kernel Control Functions ==== + +/// Initialize the RTOS Kernel for creating objects. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS. +osStatus osKernelInitialize (void); + +/// Start the RTOS Kernel. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS. +osStatus osKernelStart (void); + +/// Check if the RTOS kernel is already started. +/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS. +/// \return 0 RTOS is not started, 1 RTOS is started. +int32_t osKernelRunning(void); + +#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available + +/// Get the RTOS kernel system timer counter +/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS. +/// \return RTOS kernel system timer as 32-bit value +uint32_t osKernelSysTick (void); + +/// The RTOS kernel system timer frequency in Hz +/// \note Reflects the system timer setting and is typically defined in a configuration file. +#define osKernelSysTickFrequency 100000000 + +/// Convert a microseconds value to a RTOS kernel system timer value. +/// \param microsec time value in microseconds. +/// \return time value normalized to the \ref osKernelSysTickFrequency +#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000) + +#endif // System Timer available + +// ==== Thread Management ==== + +/// Create a Thread Definition with function, priority, and stack requirements. +/// \param name name of the thread function. +/// \param priority initial priority of the thread function. +/// \param instances number of possible thread instances. +/// \param stacksz stack size (in bytes) requirements for the thread function. +/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osThreadDef(name, priority, instances, stacksz) \ +extern const osThreadDef_t os_thread_def_##name +#else // define the object +#define osThreadDef(name, priority, instances, stacksz) \ +const osThreadDef_t os_thread_def_##name = \ +{ (name), (priority), (instances), (stacksz) } +#endif + +/// Access a Thread definition. +/// \param name name of the thread definition object. +/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osThread(name) \ +&os_thread_def_##name + +/// Create a thread and add it to Active Threads and set it to state READY. +/// \param[in] thread_def thread definition referenced with \ref osThread. +/// \param[in] argument pointer that is passed to the thread function as start argument. +/// \return thread ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS. +osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument); + +/// Return the thread ID of the current running thread. +/// \return thread ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS. +osThreadId osThreadGetId (void); + +/// Terminate execution of a thread and remove it from Active Threads. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS. +osStatus osThreadTerminate (osThreadId thread_id); + +/// Pass control to next thread that is in state \b READY. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS. +osStatus osThreadYield (void); + +/// Change priority of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] priority new priority value for the thread function. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS. +osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority); + +/// Get current priority of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return current priority value of the thread function. +/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS. +osPriority osThreadGetPriority (osThreadId thread_id); + + +// ==== Generic Wait Functions ==== + +/// Wait for Timeout (Time Delay). +/// \param[in] millisec time delay value +/// \return status code that indicates the execution status of the function. +osStatus osDelay (uint32_t millisec); + +#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available + +/// Wait for Signal, Message, Mail, or Timeout. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return event that contains signal, message, or mail information or error code. +/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS. +osEvent osWait (uint32_t millisec); + +#endif // Generic Wait available + + +// ==== Timer Management Functions ==== +/// Define a Timer object. +/// \param name name of the timer object. +/// \param function name of the timer call back function. +/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osTimerDef(name, function) \ +extern const osTimerDef_t os_timer_def_##name +#else // define the object +#define osTimerDef(name, function) \ +const osTimerDef_t os_timer_def_##name = \ +{ (function) } +#endif + +/// Access a Timer definition. +/// \param name name of the timer object. +/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osTimer(name) \ +&os_timer_def_##name + +/// Create a timer. +/// \param[in] timer_def timer object referenced with \ref osTimer. +/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. +/// \param[in] argument argument to the timer call back function. +/// \return timer ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS. +osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument); + +/// Start or restart a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \param[in] millisec time delay value of the timer. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS. +osStatus osTimerStart (osTimerId timer_id, uint32_t millisec); + +/// Stop the timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS. +osStatus osTimerStop (osTimerId timer_id); + +/// Delete a timer that was created by \ref osTimerCreate. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS. +osStatus osTimerDelete (osTimerId timer_id); + + +// ==== Signal Management ==== + +/// Set the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that should be set. +/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. +/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS. +int32_t osSignalSet (osThreadId thread_id, int32_t signals); + +/// Clear the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that shall be cleared. +/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. +/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS. +int32_t osSignalClear (osThreadId thread_id, int32_t signals); + +/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. +/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return event flag information or error code. +/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS. +osEvent osSignalWait (int32_t signals, uint32_t millisec); + + +// ==== Mutex Management ==== + +/// Define a Mutex. +/// \param name name of the mutex object. +/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMutexDef(name) \ +extern const osMutexDef_t os_mutex_def_##name +#else // define the object +#define osMutexDef(name) \ +const osMutexDef_t os_mutex_def_##name = { 0 } +#endif + +/// Access a Mutex definition. +/// \param name name of the mutex object. +/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMutex(name) \ +&os_mutex_def_##name + +/// Create and Initialize a Mutex object. +/// \param[in] mutex_def mutex definition referenced with \ref osMutex. +/// \return mutex ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS. +osMutexId osMutexCreate (const osMutexDef_t *mutex_def); + +/// Wait until a Mutex becomes available. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS. +osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec); + +/// Release a Mutex that was obtained by \ref osMutexWait. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS. +osStatus osMutexRelease (osMutexId mutex_id); + +/// Delete a Mutex that was created by \ref osMutexCreate. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS. +osStatus osMutexDelete (osMutexId mutex_id); + + +// ==== Semaphore Management Functions ==== + +#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) // Semaphore available + +/// Define a Semaphore object. +/// \param name name of the semaphore object. +/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osSemaphoreDef(name) \ +extern const osSemaphoreDef_t os_semaphore_def_##name +#else // define the object +#define osSemaphoreDef(name) \ +const osSemaphoreDef_t os_semaphore_def_##name = { 0 } +#endif + +/// Access a Semaphore definition. +/// \param name name of the semaphore object. +/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osSemaphore(name) \ +&os_semaphore_def_##name + +/// Create and Initialize a Semaphore object used for managing resources. +/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore. +/// \param[in] count number of available resources. +/// \return semaphore ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS. +osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count); + +/// Wait until a Semaphore token becomes available. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return number of available tokens, or -1 in case of incorrect parameters. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS. +int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec); + +/// Release a Semaphore token. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS. +osStatus osSemaphoreRelease (osSemaphoreId semaphore_id); + +/// Delete a Semaphore that was created by \ref osSemaphoreCreate. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS. +osStatus osSemaphoreDelete (osSemaphoreId semaphore_id); + +#endif // Semaphore available + + +// ==== Memory Pool Management Functions ==== + +#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool Management available + +/// \brief Define a Memory Pool. +/// \param name name of the memory pool. +/// \param no maximum number of blocks (objects) in the memory pool. +/// \param type data type of a single block (object). +/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osPoolDef(name, no, type) \ +extern const osPoolDef_t os_pool_def_##name +#else // define the object +#define osPoolDef(name, no, type) \ +const osPoolDef_t os_pool_def_##name = \ +{ (no), sizeof(type), NULL } +#endif + +/// \brief Access a Memory Pool definition. +/// \param name name of the memory pool +/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osPool(name) \ +&os_pool_def_##name + +/// Create and Initialize a memory pool. +/// \param[in] pool_def memory pool definition referenced with \ref osPool. +/// \return memory pool ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS. +osPoolId osPoolCreate (const osPoolDef_t *pool_def); + +/// Allocate a memory block from a memory pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS. +void *osPoolAlloc (osPoolId pool_id); + +/// Allocate a memory block from a memory pool and set memory block to zero. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS. +void *osPoolCAlloc (osPoolId pool_id); + +/// Return an allocated memory block back to a specific memory pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \param[in] block address of the allocated memory block that is returned to the memory pool. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS. +osStatus osPoolFree (osPoolId pool_id, void *block); + +#endif // Memory Pool Management available + + +// ==== Message Queue Management Functions ==== + +#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queues available + +/// \brief Create a Message Queue Definition. +/// \param name name of the queue. +/// \param queue_sz maximum number of messages in the queue. +/// \param type data type of a single message element (for debugger). +/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMessageQDef(name, queue_sz, type) \ +extern const osMessageQDef_t os_messageQ_def_##name +#else // define the object +#define osMessageQDef(name, queue_sz, type) \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), sizeof (type) } +#endif + +/// \brief Access a Message Queue Definition. +/// \param name name of the queue +/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMessageQ(name) \ +&os_messageQ_def_##name + +/// Create and Initialize a Message Queue. +/// \param[in] queue_def queue definition referenced with \ref osMessageQ. +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return message queue ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS. +osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id); + +/// Put a Message to a Queue. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] info message information. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS. +osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec); + +/// Get a Message or Wait for a Message from a Queue. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out. +/// \return event information that includes status code. +/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS. +osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec); + +#endif // Message Queues available + + +// ==== Mail Queue Management Functions ==== + +#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queues available + +/// \brief Create a Mail Queue Definition. +/// \param name name of the queue +/// \param queue_sz maximum number of messages in queue +/// \param type data type of a single message element +/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#if defined (osObjectsExternal) // object is external +#define osMailQDef(name, queue_sz, type) \ +extern const osMailQDef_t os_mailQ_def_##name +#else // define the object +#define osMailQDef(name, queue_sz, type) \ +const osMailQDef_t os_mailQ_def_##name = \ +{ (queue_sz), sizeof (type) } +#endif + +/// \brief Access a Mail Queue Definition. +/// \param name name of the queue +/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the +/// macro body is implementation specific in every CMSIS-RTOS. +#define osMailQ(name) \ +&os_mailQ_def_##name + +/// Create and Initialize mail queue. +/// \param[in] queue_def reference to the mail queue definition obtain with \ref osMailQ +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return mail queue ID for reference by other functions or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS. +osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id); + +/// Allocate a memory block from a mail. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS. +void *osMailAlloc (osMailQId queue_id, uint32_t millisec); + +/// Allocate a memory block from a mail and set memory block to zero. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS. +void *osMailCAlloc (osMailQId queue_id, uint32_t millisec); + +/// Put a mail to a queue. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS. +osStatus osMailPut (osMailQId queue_id, void *mail); + +/// Get a mail from a queue. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec timeout value or 0 in case of no time-out +/// \return event that contains mail information or error code. +/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS. +osEvent osMailGet (osMailQId queue_id, uint32_t millisec); + +/// Free a memory block from a mail. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail pointer to the memory block that was obtained with \ref osMailGet. +/// \return status code that indicates the execution status of the function. +/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS. +osStatus osMailFree (osMailQId queue_id, void *mail); + +#endif // Mail Queues available + + +#ifdef __cplusplus +} +#endif + +#endif // _CMSIS_OS_H