therm Changeset - 08d36c537581 · protofusion repositories

Changeset - 08d36c537581

Parent rev.

Child rev.

[Not reviewed]

default

0 2 0

Ethan Zonca - 10 years ago 2014-07-02 22:35:57
ez@ethanzonca.com

Blinky lights on the therm board

2 files changed with 19 insertions and 49 deletions:

main.c

stm32l100c_discovery.h

0 comments (0 inline, 0 general)

main.c

➞

Show inline comments

@@ @@ -16,7 +16,7 @@ int main(void) @@
   STM_EVAL_LEDInit(LED4);
   /* Initialize User_Button on STM32L100C-Discovery */
   STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
+  //STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
   /* SysTick end of count event each 1ms */
   RCC_GetClocksFreq(&RCC_Clocks);
@@ @@ -27,55 +27,25 @@ int main(void) @@
  /* Init lcd driver */
   u8g_t u8g;
   u8g_InitComFn(&u8g, &u8g_dev_ssd1306_128x64_hw_spi, u8g_com_hw_spi_fn);
+  //u8g_InitComFn(&u8g, &u8g_dev_ssd1306_128x64_hw_spi, u8g_com_hw_spi_fn);
       STM_EVAL_LEDOn(LED4);
   Delay(1000);
       STM_EVAL_LEDOff(LED4);
   Delay(1000);
   while(1)
+  {
     /* Check if the user button is pressed */
     if(STM_EVAL_PBGetState(BUTTON_USER)== SET)
+    {
       /* BlinkSpeed: 1 -> 2 -> 0, then re-cycle */
       /* Turn on LD4 Blue LED during 1s each time User button is pressed */
       STM_EVAL_LEDOn(LED4);
       //STM_EVAL_LEDOn(LED3);
       /* wait for 1s */
-      Delay(1000);
+      Delay(300);
       /* Turn off LD4 Blue LED after 1s each time User button is pressed */
       STM_EVAL_LEDOff(LED4);
       /* Increment the blink speed counter */
       BlinkSpeed++;
       /* Default value for blink speed counter */
       if(BlinkSpeed == 3)
+      {
         BlinkSpeed = 0;
+      }
+    }
     /* Test on blink speed */
     if(BlinkSpeed == 2)
+    {
       /* LED3 toggles each 100 ms */
       STM_EVAL_LEDToggle(LED3);
       /* maintain LED3 status for 100ms */
       Delay(100);
+    }
     else if(BlinkSpeed == 1)
+    {
       /* LED3 toggles each 200 ms */
       STM_EVAL_LEDToggle(LED3);
       /* maintain LED3 status for 200ms */
       Delay(200);
+    }
     else
+    {
       /* LED3 Off */
       STM_EVAL_LEDOff(LED3);
+    }
       Delay(300);
+  }
+}

stm32l100c_discovery.h

➞

Show inline comments

@@ @@ -27,20 +27,20 @@ typedef enum @@
 #define LEDn                             2
 #define LED3_PIN                         GPIO_Pin_9
 #define LED3_GPIO_PORT                   GPIOC
 #define LED3_GPIO_CLK                    RCC_AHBPeriph_GPIOC
 #define LED3_GPIO_PORT                   GPIOB
 #define LED3_GPIO_CLK                    RCC_AHBPeriph_GPIOB
 #define LED4_PIN                         GPIO_Pin_8
 #define LED4_GPIO_PORT                   GPIOC
 #define LED4_GPIO_CLK                    RCC_AHBPeriph_GPIOC
 #define LED4_PIN                         GPIO_Pin_15
 #define LED4_GPIO_PORT                   GPIOA
 #define LED4_GPIO_CLK                    RCC_AHBPeriph_GPIOA
 #define BUTTONn                          1
 #define USER_BUTTON_PIN                GPIO_Pin_0
 #define USER_BUTTON_GPIO_PORT          GPIOA
 #define USER_BUTTON_GPIO_CLK           RCC_AHBPeriph_GPIOA
 #define USER_BUTTON_PIN                GPIO_Pin_3
 #define USER_BUTTON_GPIO_PORT          GPIOB
 #define USER_BUTTON_GPIO_CLK           RCC_AHBPeriph_GPIOB
 #define USER_BUTTON_EXTI_LINE          EXTI_Line0
-#define USER_BUTTON_EXTI_PORT_SOURCE   EXTI_PortSourceGPIOA
+#define USER_BUTTON_EXTI_PORT_SOURCE   EXTI_PortSourceGPIOB
 #define USER_BUTTON_EXTI_PIN_SOURCE    EXTI_PinSource0
 #define USER_BUTTON_EXTI_IRQn          EXTI0_IRQn

0 comments (0 inline, 0 general)