therm Changeset - 51243b5920db · protofusion repositories

Changeset - 51243b5920db

Parent rev.

Child rev.

[Not reviewed]

default

0 1 0

Ethan Zonca - 10 years ago 2014-09-25 20:46:55
ez@ethanzonca.com

Fixed EEPROM read issue

1 file changed with 14 insertions and 14 deletions:

main.c

0 comments (0 inline, 0 general)

main.c

➞

Show inline comments

@@ @@ -326,90 +326,90 @@ uint16_t k_d = 1;*/ @@
 #define EEPROM_ADDR_STEAMTEMP		0x0034
 #define EEPROM_BASE_ADDR    0x08080000
 #define EEPROM_BYTE_SIZE    0x0FFF
 /*
 uint32_t EEPROM_ReadWord(uint16_t Addr)
+{
     uint32 *wAddr;
     wAddr=(uint32 *)(EEPROM_BASE_ADDR+Addr);
     uint32 res;
     res = *wAddr++;
     while(Length--){
         *Buffer++=*wAddr++;
+    }
+}
 */
 void save_settings()
+{
     DATA_EEPROM_Unlock();
     // Try programming a word at an address divisible by 4
     DATA_EEPROM_ProgramWord(EEPROM_ADDR_BOOTTOBREW, boottobrew);
     DATA_EEPROM_ProgramWord(EEPROM_ADDR_WINDUP_GUARD, windup_guard);
     DATA_EEPROM_ProgramWord(EEPROM_ADDR_K_P, k_p);
     DATA_EEPROM_ProgramWord(EEPROM_ADDR_K_I, k_i);
     DATA_EEPROM_ProgramWord(EEPROM_ADDR_K_D, k_d);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_BOOTTOBREW, boottobrew);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_WINDUP_GUARD, windup_guard);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_P, k_p);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_I, k_i);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_D, k_d);
     DATA_EEPROM_Lock();
+}
 void save_setpoints()
+{
     DATA_EEPROM_Unlock();
     DATA_EEPROM_ProgramWord(EEPROM_ADDR_BREWTEMP, setpoint_brew);
     DATA_EEPROM_ProgramWord(EEPROM_ADDR_STEAMTEMP, setpoint_steam);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_BREWTEMP, setpoint_brew);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_STEAMTEMP, setpoint_steam);
     DATA_EEPROM_Lock();
+}
 // TODO: Save/restore temperature setpoint settings
 void restore_settings()
+{
     DATA_EEPROM_Unlock();
     while(FLASH_GetStatus()==FLASH_BUSY);
     boottobrew = (*(__IO uint32_t*)EEPROM_ADDR_BOOTTOBREW);
+    boottobrew = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_BOOTTOBREW);
     while(FLASH_GetStatus()==FLASH_BUSY);
     windup_guard = (*(__IO uint32_t*)EEPROM_ADDR_WINDUP_GUARD);
+    windup_guard = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_WINDUP_GUARD);
     while(FLASH_GetStatus()==FLASH_BUSY);
     k_p = (*(__IO uint32_t*)EEPROM_ADDR_K_P);
+    k_p = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_K_P);
     while(FLASH_GetStatus()==FLASH_BUSY);
     k_i = (*(__IO uint32_t*)EEPROM_ADDR_K_I);
+    k_i = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_K_I);
     while(FLASH_GetStatus()==FLASH_BUSY);
     k_d = (*(__IO uint32_t*)EEPROM_ADDR_K_D);
+    k_d = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_K_D);
     while(FLASH_GetStatus()==FLASH_BUSY);
     setpoint_brew = (*(__IO uint32_t*)EEPROM_ADDR_BREWTEMP);
+    setpoint_brew = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_BREWTEMP);
     while(FLASH_GetStatus()==FLASH_BUSY);
     setpoint_steam = (*(__IO uint32_t*)EEPROM_ADDR_STEAMTEMP);
+    setpoint_steam = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_STEAMTEMP);
     DATA_EEPROM_Lock();
+}
 void user_input(uint16_t* to_modify)
+{
     if(CHANGE_ELAPSED) {
         // TODO: Make function that takes reference to a var and increase/decreases it based on buttonpress
         if(!GPIO_ReadInputDataBit(SW_UP) ) {
             CHANGE_RESET;
             (*to_modify)++;
+        }
         else if(!GPIO_ReadInputDataBit(SW_DOWN) && (*to_modify) > 0) {
             CHANGE_RESET;
             (*to_modify)--;
+        }
+    }
+}

0 comments (0 inline, 0 general)