therm Changeset - 7e85f405b6d0 · protofusion repositories

Changeset - 7e85f405b6d0

Parent rev.

Child rev.

[Not reviewed]

default

0 1 0

Ethan Zonca - 10 years ago 2014-08-23 23:36:42
ez@ethanzonca.com

PID setting now more user friendly

1 file changed with 98 insertions and 17 deletions:

main.c

0 comments (0 inline, 0 general)

main.c

➞

Show inline comments

@@ @@ -12,16 +12,16 @@ @@
 #define LED_STAT  GPIOA,GPIO_Pin_15
 #define MAX_CS GPIOB,GPIO_Pin_12
 // TODO: Grab buttonpresses with interrupts
 #define SW_BTN  GPIOB, GPIO_Pin_3
-#define SW_UP   GPIOB, GPIO_Pin_7
+#define SW_UP   GPIOB, GPIO_Pin_4
 #define SW_DOWN GPIOB, GPIO_Pin_6
 #define SW_LEFT GPIOB, GPIO_Pin_5
-#define SW_RIGHT GPIOB, GPIO_Pin_4
+#define SW_RIGHT GPIOB, GPIO_Pin_7
 // USB Supporting Vars
 extern __IO uint8_t Receive_Buffer[64];
 extern __IO  uint32_t Receive_length ;
 extern __IO  uint32_t length ;
 uint8_t Send_Buffer[64];
@@ @@ -210,15 +210,15 @@ void update_temp() { @@
     Delay(1);
     GPIO_SetBits(MAX_CS);
+}
 int32_t setpoint = 0;
 int32_t p = 1;
 int32_t i = 1;
 int32_t d = 1;
 uint16_t k_p = 1;
 uint16_t k_i = 1;
 uint16_t k_d = 1;
 // Process things
 void process()
+{
     update_temp(); // Read MAX31855
@@ @@ -245,12 +245,13 @@ enum state { @@
     STATE_PREHEAT_STEAM,
     STATE_MAINTAIN_STEAM,
 };
 uint8_t state = STATE_IDLE;
 uint8_t goto_mode = 2;
 // State machine
 void machine()
+{
     uint8_t last_state = state;
@@ @@ -260,86 +261,166 @@ void machine() @@
         case STATE_IDLE:
+        {
             // Write text to OLED
             // [ therm :: idle ]
             ssd1306_DrawString("therm :: idle ", 0, 40);
             ssd1306_drawlogo();
             char tempstr[9];
             char tempstr[5];
             itoa_fp(temp, temp_frac, tempstr);
             ssd1306_DrawString("Temp: ", 2, 40);
             ssd1306_DrawString("    ", 2, 70);
             ssd1306_DrawString(tempstr, 2, 72);
             ssd1306_DrawString("Temp: ", 3, 40);
             ssd1306_DrawString("    ", 3, 70);
             ssd1306_DrawString(tempstr, 3, 72);
             ssd1306_drawlogo();
             switch(goto_mode) {
                 case 2:
+                {
                     ssd1306_DrawString("-> brew     ", 1, 40);
                 } break;
                 case 1:
+                {
                     ssd1306_DrawString("-> set P/I/D", 1, 40);
                 } break;
                 case 0:
+                {
                     ssd1306_DrawString("-> setup    ", 1, 40);
                 } break;
+            }
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 switch(goto_mode) {
                     case 2:
                         state = STATE_PREHEAT_BREW;
                         break;
                     case 1:
                 state = STATE_SETP;
                         break;
                     case 0:
                         state = STATE_SETP;
                         break;
                     default:
                         state = STATE_PREHEAT_BREW;
+            }
+            }
             else if(!GPIO_ReadInputDataBit(SW_UP) && goto_mode < 2) {
                 goto_mode++;
+            }
             else if(!GPIO_ReadInputDataBit(SW_DOWN) && k_p > 0 && goto_mode > 0) {
                 goto_mode--;
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETP:
+        {
             // Write text to OLED
             // [ therm :: set p ]
             // [ p = 12         ]
             ssd1306_DrawString("therm :: set p", 0, 40);
             ssd1306_DrawString("Proportional", 0, 40);
             char tempstr[6];
             itoa(k_p, tempstr);
             ssd1306_DrawString("P=", 1, 45);
             ssd1306_DrawString("    ", 1, 57);
             ssd1306_DrawString(tempstr, 1, 57);
             ssd1306_DrawString("Press to accept", 3, 40);
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 state = STATE_SETI;
+            }
             else if(!GPIO_ReadInputDataBit(SW_UP)) {
                 k_p++;
+            }
             else if(!GPIO_ReadInputDataBit(SW_DOWN) && k_p > 0) {
                 k_p--;
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETI:
+        {
             // Write text to OLED
             // [ therm :: set i ]
             // [ i = 12         ]
             ssd1306_DrawString("therm :: set i", 0, 40);
             ssd1306_DrawString("Integral", 0, 40);
             char tempstr[6];
             itoa(k_i, tempstr);
             ssd1306_DrawString("I=", 1, 45);
             ssd1306_DrawString("    ", 1, 57);
             ssd1306_DrawString(tempstr, 1, 57);
             ssd1306_DrawString("Press to accept", 3, 40);
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 state = STATE_SETD;
+            }
             else if(!GPIO_ReadInputDataBit(SW_UP)) {
                 k_i++;
+            }
             else if(!GPIO_ReadInputDataBit(SW_DOWN) && k_i > 0) {
                 k_i--;
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETD:
+        {
             // Write text to OLED
             // [ therm :: set d ]
             // [ d = 12         ]
             ssd1306_DrawString("therm :: set d", 0, 40);
             ssd1306_DrawString("Derivative", 0, 40);
             char tempstr[6];
             itoa(k_d, tempstr);
             ssd1306_DrawString("D=", 1, 45);
             ssd1306_DrawString("    ", 1, 57);
             ssd1306_DrawString(tempstr, 1, 57);
             ssd1306_DrawString("Press to accept", 3, 40);
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 state = STATE_IDLE;
+            }
             else if(!GPIO_ReadInputDataBit(SW_UP)) {
                 k_d++;
+            }
             else if(!GPIO_ReadInputDataBit(SW_DOWN) && k_d > 0) {
                 k_d--;
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_PREHEAT_BREW:
+        {
             // Write text to OLED
             // [ therm : preheating brew ]
             // [ 30 => 120 C             ]
-            ssd1306_DrawString("therm :: Bpreheat", 0, 40);
+            ssd1306_DrawString("Preheating...", 0, 40);
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 state = STATE_IDLE;
+            }
@@ @@ -352,13 +433,13 @@ void machine() @@
         case STATE_MAINTAIN_BREW:
+        {
             // Write text to OLED
             // [ therm : ready to brew ]
             // [ 30 => 120 C           ]
-            ssd1306_DrawString("therm :: Bready", 0, 40);
+            ssd1306_DrawString("Ready to Brew!", 0, 40);
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 state = STATE_IDLE;
+            }
@@ @@ -370,13 +451,13 @@ void machine() @@
         case STATE_PREHEAT_STEAM:
+        {
             // Write text to OLED
             // [ therm : preheating steam ]
             // [ 30 => 120 C           ]
-            ssd1306_DrawString("therm :: Spreheat", 0, 40);
+            ssd1306_DrawString("Preheating...", 0, 40);
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 state = STATE_IDLE;
+            }
@@ @@ -389,13 +470,13 @@ void machine() @@
         case STATE_MAINTAIN_STEAM:
+        {
             // Write text to OLED
             // [ therm : ready to steam ]
             // [ 30 => 120 C            ]
-            ssd1306_DrawString("therm :: Sready", 0, 40);
+            ssd1306_DrawString("Ready to Steam!", 0, 40);
             // Button handler
             if(!GPIO_ReadInputDataBit(SW_BTN)) {
                 state = STATE_IDLE;
+            }

0 comments (0 inline, 0 general)