therm Changeset - e1ff9c2d3789 · protofusion repositories

Changeset - e1ff9c2d3789

Parent rev.

Child rev.

[Not reviewed]

default

0 1 0

Ethan Zonca - 10 years ago 2014-09-25 21:17:44
ez@ethanzonca.com

Initial attempt of minimal eeprom lib, doesn't seem to save properly.

1 file changed with 107 insertions and 35 deletions:

main.c

107

0 comments (0 inline, 0 general)

main.c

➞

Show inline comments

@@ @@ -319,88 +319,160 @@ uint16_t k_d = 1;*/ @@
 #define EEPROM_ADDR_WINDUP_GUARD 	0x001C
 #define EEPROM_ADDR_BOOTTOBREW		0x0020
 #define EEPROM_ADDR_K_P			0x0024
 #define EEPROM_ADDR_K_I			0x0028
 #define EEPROM_ADDR_K_D			0x002C
 #define EEPROM_ADDR_BREWTEMP		0x0030
 #define EEPROM_ADDR_STEAMTEMP		0x0034
 #define EEPROM_BASE_ADDR    0x08080000
 #define EEPROM_BYTE_SIZE    0x0FFF
 /*
 uint32_t EEPROM_ReadWord(uint16_t Addr)
+{
     uint32 *wAddr;
     wAddr=(uint32 *)(EEPROM_BASE_ADDR+Addr);
 void Minimal_EEPROM_Unlock(void)
+{
   if((FLASH->PECR & FLASH_PECR_PELOCK) != RESET)
+  {
     /* Unlocking the Data memory and FLASH_PECR register access*/
     FLASH->PEKEYR = FLASH_PEKEY1;
     FLASH->PEKEYR = FLASH_PEKEY2;
+  }
+}
 void Minimal_EEPROM_Lock(void)
+{
   /* Set the PELOCK Bit to lock the data memory and FLASH_PECR register access */
   FLASH->PECR |= FLASH_PECR_PELOCK;
+}
 FLASH_Status Minimal_FLASH_GetStatus(void)
+{
   FLASH_Status FLASHstatus = FLASH_COMPLETE;
     uint32 res;
     res = *wAddr++;
   if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
+  {
     FLASHstatus = FLASH_BUSY;
+  }
   else
+  {
     if((FLASH->SR & (uint32_t)FLASH_FLAG_WRPERR)!= (uint32_t)0x00)
+    {
       FLASHstatus = FLASH_ERROR_WRP;
+    }
     else
+    {
       if((FLASH->SR & (uint32_t)0x1E00) != (uint32_t)0x00)
+      {
         FLASHstatus = FLASH_ERROR_PROGRAM;
+      }
       else
+      {
         FLASHstatus = FLASH_COMPLETE;
+      }
+    }
+  }
   /* Return the FLASH Status */
   return FLASHstatus;
+}
 FLASH_Status Minimal_FLASH_WaitForLastOperation(uint32_t Timeout)
+{
   __IO FLASH_Status status = FLASH_COMPLETE;
   /* Check for the FLASH Status */
   status = Minimal_FLASH_GetStatus();
     while(Length--){
         *Buffer++=*wAddr++;
+    }
+}
 */
   /* Wait for a FLASH operation to complete or a TIMEOUT to occur */
   while((status == FLASH_BUSY) && (Timeout != 0x00))
+  {
     status = Minimal_FLASH_GetStatus();
     Timeout--;
+  }
   if(Timeout == 0x00 )
+  {
     status = FLASH_TIMEOUT;
+  }
   /* Return the operation status */
   return status;
+}
 void Minimal_EEPROM_ProgramWord(uint32_t Address, uint32_t Data)
+{
   // Wait for last operation to be completed
   FLASH_Status status = FLASH_COMPLETE;
   status = Minimal_FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT);
   if(status == FLASH_COMPLETE)
+  {
     *(__IO uint32_t *)Address = Data;
     // Wait for last operation to be completed
     status = Minimal_FLASH_WaitForLastOperation(FLASH_ER_PRG_TIMEOUT);
+  }
   // Return the Write Status
   return status;
+}
 void save_settings()
+{
-    DATA_EEPROM_Unlock();
+   Minimal_EEPROM_Unlock();
     // Try programming a word at an address divisible by 4
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_BOOTTOBREW, boottobrew);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_WINDUP_GUARD, windup_guard);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_P, k_p);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_I, k_i);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_D, k_d);
     DATA_EEPROM_Lock();
     Minimal_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_BOOTTOBREW, boottobrew);
     Minimal_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_WINDUP_GUARD, windup_guard);
     Minimal_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_P, k_p);
     Minimal_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_I, k_i);
     Minimal_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_K_D, k_d);
     Minimal_EEPROM_Lock();
+}
 void save_setpoints()
+{
     DATA_EEPROM_Unlock();
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_BREWTEMP, setpoint_brew);
     DATA_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_STEAMTEMP, setpoint_steam);
     DATA_EEPROM_Lock();
     Minimal_EEPROM_Unlock();
     Minimal_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_BREWTEMP, setpoint_brew);
     Minimal_EEPROM_ProgramWord(EEPROM_BASE_ADDR + EEPROM_ADDR_STEAMTEMP, setpoint_steam);
     Minimal_EEPROM_Lock();
+}
 // TODO: Save/restore temperature setpoint settings
 void restore_settings()
+{
     DATA_EEPROM_Unlock();
     while(FLASH_GetStatus()==FLASH_BUSY);
     Minimal_EEPROM_Unlock();
     while(Minimal_FLASH_GetStatus()==FLASH_BUSY);
     boottobrew = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_BOOTTOBREW);
-    while(FLASH_GetStatus()==FLASH_BUSY);
+    while(Minimal_FLASH_GetStatus()==FLASH_BUSY);
     windup_guard = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_WINDUP_GUARD);
-    while(FLASH_GetStatus()==FLASH_BUSY);
+    while(Minimal_FLASH_GetStatus()==FLASH_BUSY);
     k_p = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_K_P);
-    while(FLASH_GetStatus()==FLASH_BUSY);
+    while(Minimal_FLASH_GetStatus()==FLASH_BUSY);
     k_i = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_K_I);
-    while(FLASH_GetStatus()==FLASH_BUSY);
+    while(Minimal_FLASH_GetStatus()==FLASH_BUSY);
     k_d = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_K_D);
-    while(FLASH_GetStatus()==FLASH_BUSY);
+    while(Minimal_FLASH_GetStatus()==FLASH_BUSY);
     setpoint_brew = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_BREWTEMP);
-    while(FLASH_GetStatus()==FLASH_BUSY);
+    while(Minimal_FLASH_GetStatus()==FLASH_BUSY);
     setpoint_steam = (*(__IO uint32_t*)EEPROM_BASE_ADDR + EEPROM_ADDR_STEAMTEMP);
     DATA_EEPROM_Lock();
     Minimal_EEPROM_Lock();
+}
 void user_input(uint16_t* to_modify)
+{
     if(CHANGE_ELAPSED) {
         // TODO: Make function that takes reference to a var and increase/decreases it based on buttonpress
         if(!GPIO_ReadInputDataBit(SW_UP) ) {
             CHANGE_RESET;
             (*to_modify)++;
+        }

0 comments (0 inline, 0 general)