@@ -49,13 +49,6 @@ char* itoa(int16_t i, char b[]){
return b;
}
int32_t round(double x) {
if (x >= 0)
return (long) (x+0.5);
return (long) (x-0.5);
static __IO uint32_t TimingDelay;
// Move to header file
@@ -186,31 +179,10 @@ void process()
temp = temp_pre;
// Deassert CS
Delay(1);
GPIO_SetBits(MAX_CS);
//////////////////////////
// Calc internal temp //
/* temp = temp >> 4; // Drop last 4 bits, no need for them
float internal_temp = temp & 0x7FF // Lower 11bits are internal temp
// Check internal temp sign
if(temp & 0x800) {
// Convert to negative value by extending sign and casting to signed type.
int16_t tmp = 0xF800 | (temp & 0x7FF);
internal_temp = tmp;
internal_temp *= 0.0625; // LSB = 0.0625 degrees
// Now we have a good internal temp!
*/
// Calc external temp //
if(temp > 0) {
GPIO_SetBits(LED_STAT);
@@ -223,25 +195,8 @@ void process()
ssd1306_DrawString(" ", 1, 90);
ssd1306_DrawString(tempstr, 1, 90);
/*
if((!retval || (temp & 0x2) != 0))
{
ssd1306_DrawString("!TempCOMMS", 3, 35);
//return; // Comms error - this is happening right now
else if((temp & 0x4)!= 0)
ssd1306_DrawString("!OpenThermocouple", 3, 40);
//return; // Open thermocouple
temp = (temp & 0x7FF8) >> 5;
// TODO: Add calibration offset (linear)
// Perform PID calculations
// Write output to SSR
@@ -477,7 +432,7 @@ void init_spi(void)
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; // From andysworkshop
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; // same
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8;
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_InitStructure.SPI_CRCPolynomial = 7;
SPI_Init(SPI2, &SPI_InitStructure);
Status change: