diff --git a/Libraries/CMSIS/RTOS/cmsis_os.h b/Libraries/CMSIS/RTOS/cmsis_os.h
new file mode 100644
--- /dev/null
+++ b/Libraries/CMSIS/RTOS/cmsis_os.h
@@ -0,0 +1,783 @@
+/* ----------------------------------------------------------------------
+ * $Date:        5. February 2013
+ * $Revision:    V1.02
+ *
+ * Project:      CMSIS-RTOS API
+ * Title:        cmsis_os.h template header file
+ *
+ * Version 0.02
+ *    Initial Proposal Phase
+ * Version 0.03
+ *    osKernelStart added, optional feature: main started as thread
+ *    osSemaphores have standard behavior
+ *    osTimerCreate does not start the timer, added osTimerStart
+ *    osThreadPass is renamed to osThreadYield
+ * Version 1.01
+ *    Support for C++ interface
+ *     - const attribute removed from the osXxxxDef_t typedef's
+ *     - const attribute added to the osXxxxDef macros
+ *    Added: osTimerDelete, osMutexDelete, osSemaphoreDelete
+ *    Added: osKernelInitialize
+ * Version 1.02
+ *    Control functions for short timeouts in microsecond resolution:
+ *    Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec
+ *    Removed: osSignalGet 
+ *----------------------------------------------------------------------------
+ *
+ * Copyright (c) 2013 ARM LIMITED
+ * All rights reserved.
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *  - Neither the name of ARM  nor the names of its contributors may be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *---------------------------------------------------------------------------*/
+
+/**
+\page cmsis_os_h Header File Template: cmsis_os.h
+
+The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS).
+Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents
+its implementation.
+
+The file cmsis_os.h contains:
+ - CMSIS-RTOS API function definitions
+ - struct definitions for parameters and return types
+ - status and priority values used by CMSIS-RTOS API functions
+ - macros for defining threads and other kernel objects
+
+
+<b>Name conventions and header file modifications</b>
+
+All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions.
+Definitions that are prefixed \b os_ are not used in the application code but local to this header file.
+All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread.
+
+Definitions that are marked with <b>CAN BE CHANGED</b> can be adapted towards the needs of the actual CMSIS-RTOS implementation.
+These definitions can be specific to the underlying RTOS kernel.
+
+Definitions that are marked with <b>MUST REMAIN UNCHANGED</b> cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer
+compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation.
+
+
+<b>Function calls from interrupt service routines</b>
+
+The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR):
+  - \ref osSignalSet
+  - \ref osSemaphoreRelease
+  - \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree
+  - \ref osMessagePut, \ref osMessageGet
+  - \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree
+
+Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called
+from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector.
+
+Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time.
+If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive.
+
+
+<b>Define and reference object definitions</b>
+
+With <b>\#define osObjectsExternal</b> objects are defined as external symbols. This allows to create a consistent header file
+that is used throughout a project as shown below:
+
+<i>Header File</i>
+\code
+#include <cmsis_os.h>                                         // CMSIS RTOS header file
+
+// Thread definition
+extern void thread_sample (void const *argument);             // function prototype
+osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100);
+
+// Pool definition
+osPoolDef(MyPool, 10, long);
+\endcode
+
+
+This header file defines all objects when included in a C/C++ source file. When <b>\#define osObjectsExternal</b> is
+present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be
+used throughout the whole project.
+
+<i>Example</i>
+\code
+#include "osObjects.h"     // Definition of the CMSIS-RTOS objects
+\endcode
+
+\code
+#define osObjectExternal   // Objects will be defined as external symbols
+#include "osObjects.h"     // Reference to the CMSIS-RTOS objects
+\endcode
+
+*/
+
+#ifndef _CMSIS_OS_H
+#define _CMSIS_OS_H
+
+/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version.
+#define osCMSIS           0x10002      ///< API version (main [31:16] .sub [15:0])
+
+/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number.
+#define osCMSIS_KERNEL    0x10000	   ///< RTOS identification and version (main [31:16] .sub [15:0])
+
+/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS.
+#define osKernelSystemId "KERNEL V1.00"   ///< RTOS identification string
+
+/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS.
+#define osFeature_MainThread   1       ///< main thread      1=main can be thread, 0=not available
+#define osFeature_Pool         1       ///< Memory Pools:    1=available, 0=not available
+#define osFeature_MailQ        1       ///< Mail Queues:     1=available, 0=not available
+#define osFeature_MessageQ     1       ///< Message Queues:  1=available, 0=not available
+#define osFeature_Signals      8       ///< maximum number of Signal Flags available per thread
+#define osFeature_Semaphore    30      ///< maximum count for \ref osSemaphoreCreate function
+#define osFeature_Wait         1       ///< osWait function: 1=available, 0=not available
+#define osFeature_SysTick      1       ///< osKernelSysTick functions: 1=available, 0=not available
+
+#include <stdint.h>
+#include <stddef.h>
+
+#ifdef  __cplusplus
+extern "C"
+{
+#endif
+
+
+// ==== Enumeration, structures, defines ====
+
+/// Priority used for thread control.
+/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS.
+typedef enum  {
+  osPriorityIdle          = -3,          ///< priority: idle (lowest)
+  osPriorityLow           = -2,          ///< priority: low
+  osPriorityBelowNormal   = -1,          ///< priority: below normal
+  osPriorityNormal        =  0,          ///< priority: normal (default)
+  osPriorityAboveNormal   = +1,          ///< priority: above normal
+  osPriorityHigh          = +2,          ///< priority: high
+  osPriorityRealtime      = +3,          ///< priority: realtime (highest)
+  osPriorityError         =  0x84        ///< system cannot determine priority or thread has illegal priority
+} osPriority;
+
+/// Timeout value.
+/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS.
+#define osWaitForever     0xFFFFFFFF     ///< wait forever timeout value
+
+/// Status code values returned by CMSIS-RTOS functions.
+/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS.
+typedef enum  {
+  osOK                    =     0,       ///< function completed; no error or event occurred.
+  osEventSignal           =  0x08,       ///< function completed; signal event occurred.
+  osEventMessage          =  0x10,       ///< function completed; message event occurred.
+  osEventMail             =  0x20,       ///< function completed; mail event occurred.
+  osEventTimeout          =  0x40,       ///< function completed; timeout occurred.
+  osErrorParameter        =  0x80,       ///< parameter error: a mandatory parameter was missing or specified an incorrect object.
+  osErrorResource         =  0x81,       ///< resource not available: a specified resource was not available.
+  osErrorTimeoutResource  =  0xC1,       ///< resource not available within given time: a specified resource was not available within the timeout period.
+  osErrorISR              =  0x82,       ///< not allowed in ISR context: the function cannot be called from interrupt service routines.
+  osErrorISRRecursive     =  0x83,       ///< function called multiple times from ISR with same object.
+  osErrorPriority         =  0x84,       ///< system cannot determine priority or thread has illegal priority.
+  osErrorNoMemory         =  0x85,       ///< system is out of memory: it was impossible to allocate or reserve memory for the operation.
+  osErrorValue            =  0x86,       ///< value of a parameter is out of range.
+  osErrorOS               =  0xFF,       ///< unspecified RTOS error: run-time error but no other error message fits.
+  os_status_reserved      =  0x7FFFFFFF  ///< prevent from enum down-size compiler optimization.
+} osStatus;
+
+
+/// Timer type value for the timer definition.
+/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS.
+typedef enum  {
+  osTimerOnce             =     0,       ///< one-shot timer
+  osTimerPeriodic         =     1        ///< repeating timer
+} os_timer_type;
+
+/// Entry point of a thread.
+/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS.
+typedef void (*os_pthread) (void const *argument);
+
+/// Entry point of a timer call back function.
+/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS.
+typedef void (*os_ptimer) (void const *argument);
+
+// >>> the following data type definitions may shall adapted towards a specific RTOS
+
+/// Thread ID identifies the thread (pointer to a thread control block).
+/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS.
+typedef struct os_thread_cb *osThreadId;
+
+/// Timer ID identifies the timer (pointer to a timer control block).
+/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS.
+typedef struct os_timer_cb *osTimerId;
+
+/// Mutex ID identifies the mutex (pointer to a mutex control block).
+/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS.
+typedef struct os_mutex_cb *osMutexId;
+
+/// Semaphore ID identifies the semaphore (pointer to a semaphore control block).
+/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS.
+typedef struct os_semaphore_cb *osSemaphoreId;
+
+/// Pool ID identifies the memory pool (pointer to a memory pool control block).
+/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS.
+typedef struct os_pool_cb *osPoolId;
+
+/// Message ID identifies the message queue (pointer to a message queue control block).
+/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS.
+typedef struct os_messageQ_cb *osMessageQId;
+
+/// Mail ID identifies the mail queue (pointer to a mail queue control block).
+/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS.
+typedef struct os_mailQ_cb *osMailQId;
+
+
+/// Thread Definition structure contains startup information of a thread.
+/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS.
+typedef struct os_thread_def  {
+  os_pthread               pthread;    ///< start address of thread function
+  osPriority             tpriority;    ///< initial thread priority
+  uint32_t               instances;    ///< maximum number of instances of that thread function
+  uint32_t               stacksize;    ///< stack size requirements in bytes; 0 is default stack size
+} osThreadDef_t;
+
+/// Timer Definition structure contains timer parameters.
+/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS.
+typedef struct os_timer_def  {
+  os_ptimer                 ptimer;    ///< start address of a timer function
+} osTimerDef_t;
+
+/// Mutex Definition structure contains setup information for a mutex.
+/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS.
+typedef struct os_mutex_def  {
+  uint32_t                   dummy;    ///< dummy value.
+} osMutexDef_t;
+
+/// Semaphore Definition structure contains setup information for a semaphore.
+/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS.
+typedef struct os_semaphore_def  {
+  uint32_t                   dummy;    ///< dummy value.
+} osSemaphoreDef_t;
+
+/// Definition structure for memory block allocation.
+/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS.
+typedef struct os_pool_def  {
+  uint32_t                 pool_sz;    ///< number of items (elements) in the pool
+  uint32_t                 item_sz;    ///< size of an item
+  void                       *pool;    ///< pointer to memory for pool
+} osPoolDef_t;
+
+/// Definition structure for message queue.
+/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS.
+typedef struct os_messageQ_def  {
+  uint32_t                queue_sz;    ///< number of elements in the queue
+  uint32_t                 item_sz;    ///< size of an item
+  void                       *pool;    ///< memory array for messages
+} osMessageQDef_t;
+
+/// Definition structure for mail queue.
+/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS.
+typedef struct os_mailQ_def  {
+  uint32_t                queue_sz;    ///< number of elements in the queue
+  uint32_t                 item_sz;    ///< size of an item
+  void                       *pool;    ///< memory array for mail
+} osMailQDef_t;
+
+/// Event structure contains detailed information about an event.
+/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS.
+///       However the struct may be extended at the end.
+typedef struct  {
+  osStatus                 status;     ///< status code: event or error information
+  union  {
+    uint32_t                    v;     ///< message as 32-bit value
+    void                       *p;     ///< message or mail as void pointer
+    int32_t               signals;     ///< signal flags
+  } value;                             ///< event value
+  union  {
+    osMailQId             mail_id;     ///< mail id obtained by \ref osMailCreate
+    osMessageQId       message_id;     ///< message id obtained by \ref osMessageCreate
+  } def;                               ///< event definition
+} osEvent;
+
+
+//  ==== Kernel Control Functions ====
+
+/// Initialize the RTOS Kernel for creating objects.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS.
+osStatus osKernelInitialize (void);
+
+/// Start the RTOS Kernel.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS.
+osStatus osKernelStart (void);
+
+/// Check if the RTOS kernel is already started.
+/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS.
+/// \return 0 RTOS is not started, 1 RTOS is started.
+int32_t osKernelRunning(void);
+
+#if (defined (osFeature_SysTick)  &&  (osFeature_SysTick != 0))     // System Timer available
+
+/// Get the RTOS kernel system timer counter 
+/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS.
+/// \return RTOS kernel system timer as 32-bit value 
+uint32_t osKernelSysTick (void);
+
+/// The RTOS kernel system timer frequency in Hz
+/// \note Reflects the system timer setting and is typically defined in a configuration file.
+#define osKernelSysTickFrequency 100000000
+
+/// Convert a microseconds value to a RTOS kernel system timer value.
+/// \param         microsec     time value in microseconds.
+/// \return time value normalized to the \ref osKernelSysTickFrequency
+#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000)
+
+#endif    // System Timer available
+
+//  ==== Thread Management ====
+
+/// Create a Thread Definition with function, priority, and stack requirements.
+/// \param         name         name of the thread function.
+/// \param         priority     initial priority of the thread function.
+/// \param         instances    number of possible thread instances.
+/// \param         stacksz      stack size (in bytes) requirements for the thread function.
+/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#if defined (osObjectsExternal)  // object is external
+#define osThreadDef(name, priority, instances, stacksz)  \
+extern const osThreadDef_t os_thread_def_##name
+#else                            // define the object
+#define osThreadDef(name, priority, instances, stacksz)  \
+const osThreadDef_t os_thread_def_##name = \
+{ (name), (priority), (instances), (stacksz)  }
+#endif
+
+/// Access a Thread definition.
+/// \param         name          name of the thread definition object.
+/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#define osThread(name)  \
+&os_thread_def_##name
+
+/// Create a thread and add it to Active Threads and set it to state READY.
+/// \param[in]     thread_def    thread definition referenced with \ref osThread.
+/// \param[in]     argument      pointer that is passed to the thread function as start argument.
+/// \return thread ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS.
+osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument);
+
+/// Return the thread ID of the current running thread.
+/// \return thread ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS.
+osThreadId osThreadGetId (void);
+
+/// Terminate execution of a thread and remove it from Active Threads.
+/// \param[in]     thread_id   thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS.
+osStatus osThreadTerminate (osThreadId thread_id);
+
+/// Pass control to next thread that is in state \b READY.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS.
+osStatus osThreadYield (void);
+
+/// Change priority of an active thread.
+/// \param[in]     thread_id     thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
+/// \param[in]     priority      new priority value for the thread function.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS.
+osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority);
+
+/// Get current priority of an active thread.
+/// \param[in]     thread_id     thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
+/// \return current priority value of the thread function.
+/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS.
+osPriority osThreadGetPriority (osThreadId thread_id);
+
+
+//  ==== Generic Wait Functions ====
+
+/// Wait for Timeout (Time Delay).
+/// \param[in]     millisec      time delay value
+/// \return status code that indicates the execution status of the function.
+osStatus osDelay (uint32_t millisec);
+
+#if (defined (osFeature_Wait)  &&  (osFeature_Wait != 0))     // Generic Wait available
+
+/// Wait for Signal, Message, Mail, or Timeout.
+/// \param[in] millisec          timeout value or 0 in case of no time-out
+/// \return event that contains signal, message, or mail information or error code.
+/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS.
+osEvent osWait (uint32_t millisec);
+
+#endif  // Generic Wait available
+
+
+//  ==== Timer Management Functions ====
+/// Define a Timer object.
+/// \param         name          name of the timer object.
+/// \param         function      name of the timer call back function.
+/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#if defined (osObjectsExternal)  // object is external
+#define osTimerDef(name, function)  \
+extern const osTimerDef_t os_timer_def_##name
+#else                            // define the object
+#define osTimerDef(name, function)  \
+const osTimerDef_t os_timer_def_##name = \
+{ (function) }
+#endif
+
+/// Access a Timer definition.
+/// \param         name          name of the timer object.
+/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#define osTimer(name) \
+&os_timer_def_##name
+
+/// Create a timer.
+/// \param[in]     timer_def     timer object referenced with \ref osTimer.
+/// \param[in]     type          osTimerOnce for one-shot or osTimerPeriodic for periodic behavior.
+/// \param[in]     argument      argument to the timer call back function.
+/// \return timer ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS.
+osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument);
+
+/// Start or restart a timer.
+/// \param[in]     timer_id      timer ID obtained by \ref osTimerCreate.
+/// \param[in]     millisec      time delay value of the timer.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS.
+osStatus osTimerStart (osTimerId timer_id, uint32_t millisec);
+
+/// Stop the timer.
+/// \param[in]     timer_id      timer ID obtained by \ref osTimerCreate.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS.
+osStatus osTimerStop (osTimerId timer_id);
+
+/// Delete a timer that was created by \ref osTimerCreate.
+/// \param[in]     timer_id      timer ID obtained by \ref osTimerCreate.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS.
+osStatus osTimerDelete (osTimerId timer_id);
+
+
+//  ==== Signal Management ====
+
+/// Set the specified Signal Flags of an active thread.
+/// \param[in]     thread_id     thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
+/// \param[in]     signals       specifies the signal flags of the thread that should be set.
+/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
+/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS.
+int32_t osSignalSet (osThreadId thread_id, int32_t signals);
+
+/// Clear the specified Signal Flags of an active thread.
+/// \param[in]     thread_id     thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
+/// \param[in]     signals       specifies the signal flags of the thread that shall be cleared.
+/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
+/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS.
+int32_t osSignalClear (osThreadId thread_id, int32_t signals);
+
+/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread.
+/// \param[in]     signals       wait until all specified signal flags set or 0 for any single signal flag.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out.
+/// \return event flag information or error code.
+/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS.
+osEvent osSignalWait (int32_t signals, uint32_t millisec);
+
+
+//  ==== Mutex Management ====
+
+/// Define a Mutex.
+/// \param         name          name of the mutex object.
+/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#if defined (osObjectsExternal)  // object is external
+#define osMutexDef(name)  \
+extern const osMutexDef_t os_mutex_def_##name
+#else                            // define the object
+#define osMutexDef(name)  \
+const osMutexDef_t os_mutex_def_##name = { 0 }
+#endif
+
+/// Access a Mutex definition.
+/// \param         name          name of the mutex object.
+/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#define osMutex(name)  \
+&os_mutex_def_##name
+
+/// Create and Initialize a Mutex object.
+/// \param[in]     mutex_def     mutex definition referenced with \ref osMutex.
+/// \return mutex ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS.
+osMutexId osMutexCreate (const osMutexDef_t *mutex_def);
+
+/// Wait until a Mutex becomes available.
+/// \param[in]     mutex_id      mutex ID obtained by \ref osMutexCreate.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS.
+osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec);
+
+/// Release a Mutex that was obtained by \ref osMutexWait.
+/// \param[in]     mutex_id      mutex ID obtained by \ref osMutexCreate.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS.
+osStatus osMutexRelease (osMutexId mutex_id);
+
+/// Delete a Mutex that was created by \ref osMutexCreate.
+/// \param[in]     mutex_id      mutex ID obtained by \ref osMutexCreate.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS.
+osStatus osMutexDelete (osMutexId mutex_id);
+
+
+//  ==== Semaphore Management Functions ====
+
+#if (defined (osFeature_Semaphore)  &&  (osFeature_Semaphore != 0))     // Semaphore available
+
+/// Define a Semaphore object.
+/// \param         name          name of the semaphore object.
+/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#if defined (osObjectsExternal)  // object is external
+#define osSemaphoreDef(name)  \
+extern const osSemaphoreDef_t os_semaphore_def_##name
+#else                            // define the object
+#define osSemaphoreDef(name)  \
+const osSemaphoreDef_t os_semaphore_def_##name = { 0 }
+#endif
+
+/// Access a Semaphore definition.
+/// \param         name          name of the semaphore object.
+/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#define osSemaphore(name)  \
+&os_semaphore_def_##name
+
+/// Create and Initialize a Semaphore object used for managing resources.
+/// \param[in]     semaphore_def semaphore definition referenced with \ref osSemaphore.
+/// \param[in]     count         number of available resources.
+/// \return semaphore ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS.
+osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count);
+
+/// Wait until a Semaphore token becomes available.
+/// \param[in]     semaphore_id  semaphore object referenced with \ref osSemaphoreCreate.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out.
+/// \return number of available tokens, or -1 in case of incorrect parameters.
+/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS.
+int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec);
+
+/// Release a Semaphore token.
+/// \param[in]     semaphore_id  semaphore object referenced with \ref osSemaphoreCreate.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS.
+osStatus osSemaphoreRelease (osSemaphoreId semaphore_id);
+
+/// Delete a Semaphore that was created by \ref osSemaphoreCreate.
+/// \param[in]     semaphore_id  semaphore object referenced with \ref osSemaphoreCreate.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS.
+osStatus osSemaphoreDelete (osSemaphoreId semaphore_id);
+
+#endif     // Semaphore available
+
+
+//  ==== Memory Pool Management Functions ====
+
+#if (defined (osFeature_Pool)  &&  (osFeature_Pool != 0))  // Memory Pool Management available
+
+/// \brief Define a Memory Pool.
+/// \param         name          name of the memory pool.
+/// \param         no            maximum number of blocks (objects) in the memory pool.
+/// \param         type          data type of a single block (object).
+/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#if defined (osObjectsExternal)  // object is external
+#define osPoolDef(name, no, type)   \
+extern const osPoolDef_t os_pool_def_##name
+#else                            // define the object
+#define osPoolDef(name, no, type)   \
+const osPoolDef_t os_pool_def_##name = \
+{ (no), sizeof(type), NULL }
+#endif
+
+/// \brief Access a Memory Pool definition.
+/// \param         name          name of the memory pool
+/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#define osPool(name) \
+&os_pool_def_##name
+
+/// Create and Initialize a memory pool.
+/// \param[in]     pool_def      memory pool definition referenced with \ref osPool.
+/// \return memory pool ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS.
+osPoolId osPoolCreate (const osPoolDef_t *pool_def);
+
+/// Allocate a memory block from a memory pool.
+/// \param[in]     pool_id       memory pool ID obtain referenced with \ref osPoolCreate.
+/// \return address of the allocated memory block or NULL in case of no memory available.
+/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS.
+void *osPoolAlloc (osPoolId pool_id);
+
+/// Allocate a memory block from a memory pool and set memory block to zero.
+/// \param[in]     pool_id       memory pool ID obtain referenced with \ref osPoolCreate.
+/// \return address of the allocated memory block or NULL in case of no memory available.
+/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS.
+void *osPoolCAlloc (osPoolId pool_id);
+
+/// Return an allocated memory block back to a specific memory pool.
+/// \param[in]     pool_id       memory pool ID obtain referenced with \ref osPoolCreate.
+/// \param[in]     block         address of the allocated memory block that is returned to the memory pool.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS.
+osStatus osPoolFree (osPoolId pool_id, void *block);
+
+#endif   // Memory Pool Management available
+
+
+//  ==== Message Queue Management Functions ====
+
+#if (defined (osFeature_MessageQ)  &&  (osFeature_MessageQ != 0))     // Message Queues available
+
+/// \brief Create a Message Queue Definition.
+/// \param         name          name of the queue.
+/// \param         queue_sz      maximum number of messages in the queue.
+/// \param         type          data type of a single message element (for debugger).
+/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#if defined (osObjectsExternal)  // object is external
+#define osMessageQDef(name, queue_sz, type)   \
+extern const osMessageQDef_t os_messageQ_def_##name
+#else                            // define the object
+#define osMessageQDef(name, queue_sz, type)   \
+const osMessageQDef_t os_messageQ_def_##name = \
+{ (queue_sz), sizeof (type)  }
+#endif
+
+/// \brief Access a Message Queue Definition.
+/// \param         name          name of the queue
+/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#define osMessageQ(name) \
+&os_messageQ_def_##name
+
+/// Create and Initialize a Message Queue.
+/// \param[in]     queue_def     queue definition referenced with \ref osMessageQ.
+/// \param[in]     thread_id     thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
+/// \return message queue ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS.
+osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id);
+
+/// Put a Message to a Queue.
+/// \param[in]     queue_id      message queue ID obtained with \ref osMessageCreate.
+/// \param[in]     info          message information.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS.
+osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec);
+
+/// Get a Message or Wait for a Message from a Queue.
+/// \param[in]     queue_id      message queue ID obtained with \ref osMessageCreate.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out.
+/// \return event information that includes status code.
+/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS.
+osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec);
+
+#endif     // Message Queues available
+
+
+//  ==== Mail Queue Management Functions ====
+
+#if (defined (osFeature_MailQ)  &&  (osFeature_MailQ != 0))     // Mail Queues available
+
+/// \brief Create a Mail Queue Definition.
+/// \param         name          name of the queue
+/// \param         queue_sz      maximum number of messages in queue
+/// \param         type          data type of a single message element
+/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#if defined (osObjectsExternal)  // object is external
+#define osMailQDef(name, queue_sz, type) \
+extern const osMailQDef_t os_mailQ_def_##name
+#else                            // define the object
+#define osMailQDef(name, queue_sz, type) \
+const osMailQDef_t os_mailQ_def_##name =  \
+{ (queue_sz), sizeof (type) }
+#endif
+
+/// \brief Access a Mail Queue Definition.
+/// \param         name          name of the queue
+/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the
+///       macro body is implementation specific in every CMSIS-RTOS.
+#define osMailQ(name)  \
+&os_mailQ_def_##name
+
+/// Create and Initialize mail queue.
+/// \param[in]     queue_def     reference to the mail queue definition obtain with \ref osMailQ
+/// \param[in]     thread_id     thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
+/// \return mail queue ID for reference by other functions or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS.
+osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id);
+
+/// Allocate a memory block from a mail.
+/// \param[in]     queue_id      mail queue ID obtained with \ref osMailCreate.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out
+/// \return pointer to memory block that can be filled with mail or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS.
+void *osMailAlloc (osMailQId queue_id, uint32_t millisec);
+
+/// Allocate a memory block from a mail and set memory block to zero.
+/// \param[in]     queue_id      mail queue ID obtained with \ref osMailCreate.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out
+/// \return pointer to memory block that can be filled with mail or NULL in case of error.
+/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS.
+void *osMailCAlloc (osMailQId queue_id, uint32_t millisec);
+
+/// Put a mail to a queue.
+/// \param[in]     queue_id      mail queue ID obtained with \ref osMailCreate.
+/// \param[in]     mail          memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS.
+osStatus osMailPut (osMailQId queue_id, void *mail);
+
+/// Get a mail from a queue.
+/// \param[in]     queue_id      mail queue ID obtained with \ref osMailCreate.
+/// \param[in]     millisec      timeout value or 0 in case of no time-out
+/// \return event that contains mail information or error code.
+/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS.
+osEvent osMailGet (osMailQId queue_id, uint32_t millisec);
+
+/// Free a memory block from a mail.
+/// \param[in]     queue_id      mail queue ID obtained with \ref osMailCreate.
+/// \param[in]     mail          pointer to the memory block that was obtained with \ref osMailGet.
+/// \return status code that indicates the execution status of the function.
+/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS.
+osStatus osMailFree (osMailQId queue_id, void *mail);
+
+#endif  // Mail Queues available
+
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif  // _CMSIS_OS_H