diff --git a/Libraries/u8glib/u8g_com_i2c.c b/Libraries/u8glib/u8g_com_i2c.c
new file mode 100644
--- /dev/null
+++ b/Libraries/u8glib/u8g_com_i2c.c
@@ -0,0 +1,249 @@
+/*
+  
+  u8g_com_i2c.c
+
+  generic i2c interface
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+#include "u8g.h"
+
+static uint8_t u8g_i2c_err_code;
+
+/*
+  position values
+    1: start condition
+    2: sla transfer
+*/
+static uint8_t u8g_i2c_err_pos;
+
+
+void u8g_i2c_clear_error(void)
+{
+  u8g_i2c_err_code = U8G_I2C_ERR_NONE;
+  u8g_i2c_err_pos = 0;
+}
+
+uint8_t  u8g_i2c_get_error(void)
+{
+  return u8g_i2c_err_code;
+}
+
+uint8_t u8g_i2c_get_err_pos(void)
+{
+  return u8g_i2c_err_pos;
+}
+
+static void u8g_i2c_set_error(uint8_t code, uint8_t pos)
+{
+  if ( u8g_i2c_err_code > 0 )
+    return;
+  u8g_i2c_err_code |= code;
+  u8g_i2c_err_pos = pos;
+}
+
+
+
+#if defined(__AVR__)
+#define U8G_ATMEGA_HW_TWI
+
+/* remove the definition for attiny */
+#if __AVR_ARCH__ == 2
+#undef U8G_ATMEGA_HW_TWI
+#endif
+#if __AVR_ARCH__ == 25
+#undef U8G_ATMEGA_HW_TWI
+#endif
+#endif
+
+#if defined(U8G_ATMEGA_HW_TWI)
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+
+
+void u8g_i2c_init(uint8_t options)
+{
+  /*
+  TWBR: bit rate register
+  TWSR: status register (contains preselector bits)
+
+  prescalar
+    0		1
+    1		4
+    2		16
+    3		64
+
+  f = F_CPU/(16+2*TWBR*prescalar)
+  
+  F_CPU = 16MHz
+    TWBR = 152;
+    TWSR = 0;
+	--> 50KHz
+
+    TWBR = 72;
+    TWSR = 0;
+	--> 100KHz
+
+    F_CPU/(2*100000)-8  --> calculate TWBR value for 100KHz
+*/
+  TWSR = 0;
+  TWBR = F_CPU/(2*100000)-8;
+  u8g_i2c_clear_error();
+}
+
+uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos)
+{
+  volatile uint16_t cnt = 2000;	/* timout value should be > 280 for 50KHz Bus and 16 Mhz CPU, however the start condition might need longer */
+  while( !(TWCR & mask) )
+  {
+      if ( cnt == 0 )
+      {
+	u8g_i2c_set_error(U8G_I2C_ERR_TIMEOUT, pos);
+	return 0; /* error */
+      }
+      cnt--;
+    }
+  return 1;	/* all ok */
+}
+
+/* sla includes all 8 bits (with r/w bit), assums master transmit */
+uint8_t u8g_i2c_start(uint8_t sla)
+{
+  register uint8_t status;
+  
+  /* send start */
+  TWCR = _BV(TWINT) |  _BV(TWSTA)  |  _BV(TWEN);
+   
+  /* wait */
+  if ( u8g_i2c_wait(_BV(TWINT), 1) == 0 )
+    return 0;
+  
+  status = TW_STATUS;
+ 
+  /* check status after start */  
+  if ( status != TW_START && status != TW_REP_START )
+  {
+    u8g_i2c_set_error(U8G_I2C_ERR_BUS, 1);
+    return 0;
+  }
+
+  /* set slave address */  
+  TWDR = sla;
+  
+  /* enable sla transfer */
+  TWCR = _BV(TWINT)  |  _BV(TWEN);
+
+  /* wait */
+  if ( u8g_i2c_wait(_BV(TWINT), 2) == 0 )
+    return 0;
+  status = TW_STATUS;
+
+  /* check status after sla */  
+  if ( status != TW_MT_SLA_ACK )
+  {
+    u8g_i2c_set_error(U8G_I2C_ERR_BUS, 2);
+    return 0;
+  }
+
+   return 1;
+}
+
+uint8_t u8g_i2c_send_byte(uint8_t data)
+{
+  register uint8_t status;
+  TWDR = data;
+  TWCR = _BV(TWINT)  |  _BV(TWEN);
+  if ( u8g_i2c_wait(_BV(TWINT), 3) == 0 )
+    return 0;
+  status = TW_STATUS;
+  
+  if ( status != TW_MT_DATA_ACK )
+  {
+    u8g_i2c_set_error(U8G_I2C_ERR_BUS, 3);
+    return 0;
+  }
+  
+  return 1;  
+}
+
+void u8g_i2c_stop(void)
+{
+  /* write stop */
+  TWCR = _BV(TWINT) | _BV(TWEN) | _BV(TWSTO);
+
+  /* no error is checked for the stop condition */  
+  u8g_i2c_wait(_BV(TWSTO), 4);
+  
+}
+
+/*
+void twi_send(uint8_t adr, uint8_t data1, uint8_t data2)
+{
+  u8g_i2c_start(adr<<1);
+  u8g_i2c_send_byte(data1);
+  u8g_i2c_send_byte(data2);
+  u8g_i2c_stop();
+}
+*/
+
+#else
+
+/* empty interface */
+
+void u8g_i2c_init(uint8_t options)
+{
+  u8g_i2c_clear_error();
+}
+
+uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos)
+{
+  return 1;
+}
+
+uint8_t u8g_i2c_start(uint8_t sla)
+{
+  return 1;
+}
+uint8_t u8g_i2c_send_byte(uint8_t data)
+{
+  return 1;
+}
+
+void u8g_i2c_stop(void)
+{
+}
+
+
+#endif
+