diff --git a/Libraries/u8glib/u8g_delay.c b/Libraries/u8glib/u8g_delay.c new file mode 100644 --- /dev/null +++ b/Libraries/u8glib/u8g_delay.c @@ -0,0 +1,240 @@ +/* + + u8g_delay.c + + Universal 8bit Graphics Library + + Copyright (c) 2011, olikraus@gmail.com + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, this list + of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or other + materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + + void u8g_Delay(uint16_t val) Delay by "val" milliseconds + void u8g_MicroDelay(void) Delay be one microsecond + void u8g_10MicroDelay(void) Delay by 10 microseconds + + +*/ + + +#include "u8g.h" + +/*==== Part 1: Derive suitable delay procedure ====*/ + +#if defined(ARDUINO) + +# if ARDUINO < 100 +# include +# else +# include +# endif + +# if defined(__AVR__) +# define USE_AVR_DELAY +# elif defined(__PIC32MX) +# define USE_PIC32_DELAY +# elif defined(__arm__) /* Arduino Due & Teensy */ +# define USE_ARDUINO_DELAY +# else +# define USE_ARDUINO_DELAY +# endif +#elif defined(__AVR__) +# define USE_AVR_DELAY +#elif defined(__18CXX) +# define USE_PIC18_DELAY +#elif defined(__arm__) +/* do not define anything, all procedures are expected to be defined outside u8glib */ + +/* +void u8g_Delay(uint16_t val); +void u8g_MicroDelay(void); +void u8g_10MicroDelay(void); +*/ + +#else +# define USE_DUMMY_DELAY +#endif + + + +/*==== Part 2: Definition of the delay procedures ====*/ + +/*== AVR Delay ==*/ + +#if defined(USE_AVR_DELAY) +#include +#include +#include + +/* + Delay by the provided number of milliseconds. + Thus, a 16 bit value will allow a delay of 0..65 seconds + Makes use of the _delay_loop_2 + + _delay_loop_2 will do a delay of n * 4 prozessor cycles. + with f = F_CPU cycles per second, + n = f / (1000 * 4 ) + with f = 16000000 the result is 4000 + with f = 1000000 the result is 250 + + the millisec loop, gcc requires the following overhead: + - movev 1 + - subwi 2x2 + - bne i 2 + ==> 7 cycles + ==> must be devided by 4, rounded up 7/4 = 2 +*/ +void u8g_Delay(uint16_t val) +{ + /* old version did a call to the arduino lib: delay(val); */ + while( val != 0 ) + { + _delay_loop_2( (F_CPU / 4000 ) -2); + val--; + } +} + +/* delay by one micro second */ +void u8g_MicroDelay(void) +{ +#if (F_CPU / 4000000 ) > 0 + _delay_loop_2( (F_CPU / 4000000 ) ); +#endif +} + +/* delay by 10 micro seconds */ +void u8g_10MicroDelay(void) +{ +#if (F_CPU / 400000 ) > 0 + _delay_loop_2( (F_CPU / 400000 ) ); +#endif +} + +#endif + + +/*== Delay for PIC18 (not tested) ==*/ + +#if defined(USE_PIC18_DELAY) +#include +#define GetSystemClock() (64000000ul) // Hz +#define GetInstructionClock() (GetSystemClock()/4) + +void u8g_Delay(uint16_t val) +{/* + unsigned int _iTemp = (val); + while(_iTemp--) + Delay1KTCYx((GetInstructionClock()+999999)/1000000); + */ +} +void u8g_MicroDelay(void) +{ + /* not implemented */ +} +void u8g_10MicroDelay(void) +{ + /* not implemented */ +} +#endif + + +/*== Arduino Delay ==*/ +#if defined(USE_ARDUINO_DELAY) +void u8g_Delay(uint16_t val) +{ +#if defined(__arm__) + delayMicroseconds((uint32_t)val*(uint32_t)1000); +#else + delay(val); +#endif +} +void u8g_MicroDelay(void) +{ + delayMicroseconds(1); +} +void u8g_10MicroDelay(void) +{ + delayMicroseconds(10); +} +#endif + +#if defined(USE_PIC32_DELAY) +/* + Assume chipkit here with F_CPU correctly defined + The problem was, that u8g_Delay() is called within the constructor. + It seems that the chipkit is not fully setup at this time, so a + call to delay() will not work. So here is my own implementation. + +*/ +#define CPU_COUNTS_PER_SECOND (F_CPU/2UL) +#define TICKS_PER_MILLISECOND (CPU_COUNTS_PER_SECOND/1000UL) +#include "plib.h" +void u8g_Delay(uint16_t val) +{ + uint32_t d; + uint32_t s; + d = val; + d *= TICKS_PER_MILLISECOND; + s = ReadCoreTimer(); + while ( (uint32_t)(ReadCoreTimer() - s) < d ) + ; +} + +void u8g_MicroDelay(void) +{ + uint32_t d; + uint32_t s; + d = TICKS_PER_MILLISECOND/1000; + s = ReadCoreTimer(); + while ( (uint32_t)(ReadCoreTimer() - s) < d ) + ; +} + +void u8g_10MicroDelay(void) +{ + uint32_t d; + uint32_t s; + d = TICKS_PER_MILLISECOND/100; + s = ReadCoreTimer(); + while ( (uint32_t)(ReadCoreTimer() - s) < d ) + ; +} + +#endif + +/*== Any other systems: Dummy Delay ==*/ +#if defined(USE_DUMMY_DELAY) +void u8g_Delay(uint16_t val) +{ + /* do not know how to delay... */ +} +void u8g_MicroDelay(void) +{ +} +void u8g_10MicroDelay(void) +{ +} +#endif