diff --git a/Libraries/u8glib/u8g_dev_ssd1306_128x64.c b/Libraries/u8glib/u8g_dev_ssd1306_128x64.c
new file mode 100644
--- /dev/null
+++ b/Libraries/u8glib/u8g_dev_ssd1306_128x64.c
@@ -0,0 +1,281 @@
+/*
+
+  u8g_dev_ssd1306_128x64.c
+
+  Universal 8bit Graphics Library
+  
+  Copyright (c) 2011, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+  
+*/
+
+#include "u8g.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+/* init sequence adafruit 128x64 OLED (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x64_adafruit1_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* */
+
+  0x0d3, 0x000,		/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x010,		/* [1] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x000,		/* */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x09f,		/* [1] set contrast control */
+  0x0d9, 0x022,		/* [1] pre-charge period 0x022/f1*/
+  0x0db, 0x040,		/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* init sequence adafruit 128x64 OLED (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x64_adafruit2_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* */
+
+  0x0d3, 0x000,		/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x014,		/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x000,		/* */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x0cf,		/* [2] set contrast control */
+  0x0d9, 0x0f1,		/* [2] pre-charge period 0x022/f1*/
+  0x0db, 0x040,		/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* init sequence adafruit 128x64 OLED (NOT TESTED), like adafruit3, but with page addressing mode */
+static const uint8_t u8g_dev_ssd1306_128x64_adafruit3_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* */
+
+  0x0d3, 0x000,		/*  */
+
+  0x040,				/* start line */
+  
+  0x08d, 0x014,		/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+
+  0x020, 0x002,		/* 2012-05-27: page addressing mode */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x0cf,		/* [2] set contrast control */
+  0x0d9, 0x0f1,		/* [2] pre-charge period 0x022/f1*/
+  0x0db, 0x040,		/* vcomh deselect level */
+  
+  0x02e,				/* 2012-05-27: Deactivate scroll */ 
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* init sequence Univision datasheet (NOT TESTED) */
+static const uint8_t u8g_dev_ssd1306_128x64_univision_init_seq[] PROGMEM = {
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_RST(1),           /* do reset low pulse with (1*16)+2 milliseconds */
+  U8G_ESC_CS(1),             /* enable chip */
+
+  0x0ae,				/* display off, sleep mode */
+  0x0d5, 0x080,		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  0x0a8, 0x03f,		/* multiplex ratio */
+  0x0d3, 0x000,		/* display offset */
+  0x040,				/* start line */
+  0x08d, 0x010,		/* charge pump setting (p62): 0x014 enable, 0x010 disable */
+  0x0a1,				/* segment remap a0/a1*/
+  0x0c8,				/* c0: scan dir normal, c8: reverse */
+  0x0da, 0x012,		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+  0x081, 0x09f,		/* set contrast control */
+  0x0d9, 0x022,		/* pre-charge period */
+  0x0db, 0x040,		/* vcomh deselect level */
+  0x022, 0x000,		/* page addressing mode WRONG: 3 byte cmd! */
+  0x0a4,				/* output ram to display */
+  0x0a6,				/* none inverted normal display mode */
+  0x0af,				/* display on */
+  U8G_ESC_CS(0),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+/* select one init sequence here */
+//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_univision_init_seq
+//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit1_init_seq
+//#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit2_init_seq
+#define u8g_dev_ssd1306_128x64_init_seq u8g_dev_ssd1306_128x64_adafruit3_init_seq
+
+
+static const uint8_t u8g_dev_ssd1306_128x64_data_start[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x010,		/* set upper 4 bit of the col adr to 0 */
+  0x000,		/* set lower 4 bit of the col adr to 4  */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0ae,		/* display off */      
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
+  U8G_ESC_ADR(0),           /* instruction mode */
+  U8G_ESC_CS(1),             /* enable chip */
+  0x0af,		/* display on */      
+  U8G_ESC_DLY(50),       /* delay 50 ms */
+  U8G_ESC_CS(1),             /* disable chip */
+  U8G_ESC_END                /* end of sequence */
+};
+
+uint8_t u8g_dev_ssd1306_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (SSD1306) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+        if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 )
+          return 0;
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_ssd1306_128x64_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+  switch(msg)
+  {
+    case U8G_DEV_MSG_INIT:
+      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_init_seq);
+      break;
+    case U8G_DEV_MSG_STOP:
+      break;
+    case U8G_DEV_MSG_PAGE_NEXT:
+      {
+        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+	
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); /* select current page (SSD1306) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+	u8g_WriteSequence(u8g, dev, pb->width, pb->buf); 
+        u8g_SetChipSelect(u8g, dev, 0);
+	
+        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x64_data_start);    
+        u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); /* select current page (SSD1306) */
+        u8g_SetAddress(u8g, dev, 1);           /* data mode */
+	u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); 
+        u8g_SetChipSelect(u8g, dev, 0);
+      }
+      break;
+    case U8G_DEV_MSG_SLEEP_ON:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);    
+      return 1;
+    case U8G_DEV_MSG_SLEEP_OFF:
+      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);    
+      return 1;
+  }
+  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ssd1306_128x64_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1306_128x64_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1306_128x64_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x64_fn, U8G_COM_SSD_I2C);
+
+uint8_t u8g_dev_ssd1306_128x64_2x_buf[WIDTH*2] U8G_NOCOMMON ; 
+u8g_pb_t u8g_dev_ssd1306_128x64_2x_pb = { {16, HEIGHT, 0, 0, 0},  WIDTH, u8g_dev_ssd1306_128x64_2x_buf}; 
+u8g_dev_t u8g_dev_ssd1306_128x64_2x_sw_spi = { u8g_dev_ssd1306_128x64_2x_fn, &u8g_dev_ssd1306_128x64_2x_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1306_128x64_2x_hw_spi = { u8g_dev_ssd1306_128x64_2x_fn, &u8g_dev_ssd1306_128x64_2x_pb, U8G_COM_HW_SPI };
+u8g_dev_t u8g_dev_ssd1306_128x64_2x_i2c = { u8g_dev_ssd1306_128x64_2x_fn, &u8g_dev_ssd1306_128x64_2x_pb, U8G_COM_SSD_I2C };
+