diff --git a/Libraries/u8glib/u8g_dev_st7565_lm6063.c b/Libraries/u8glib/u8g_dev_st7565_lm6063.c new file mode 100644 --- /dev/null +++ b/Libraries/u8glib/u8g_dev_st7565_lm6063.c @@ -0,0 +1,236 @@ +/* + + u8g_dev_st7565_lm6063.c + + Universal 8bit Graphics Library + + Copyright (c) 2011, olikraus@gmail.com + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, this list + of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or other + materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +*/ + +#include "u8g.h" + +#define WIDTH 128 +#define HEIGHT 64 +#define PAGE_HEIGHT 8 + +#ifdef OLD_ADAFRUIT_CODE +static const uint8_t OLD_u8g_dev_st7565_lm6063_init_seq[] PROGMEM = { + U8G_ESC_CS(0), /* disable chip */ + U8G_ESC_ADR(0), /* instruction mode */ + U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ + U8G_ESC_CS(1), /* enable chip */ + + 0x040, /* set display start line */ + 0x0a1, /* ADC set to reverse */ + 0x0c8, /* common output mode: set scan direction normal operation/SHL Select / 17 Jan: seems to be a bug, must be 0x0c0 */ + 0x0a6, /* display normal, bit val 0: LCD pixel off. */ + 0x0a2, /* LCD bias 1/9 */ + 0x02f, /* all power control circuits on */ + /*0x0f8,*/ /* set booster ratio to */ + /*0x000, */ /* 4x */ + /*0x027,*/ /* set V0 voltage resistor ratio to large */ + 0x081, /* set contrast */ + 0x018, /* contrast value*/ + 0x0ac, /* indicator */ + 0x000, /* disable */ + 0x0af, /* display on */ + + U8G_ESC_DLY(100), /* delay 100 ms */ + 0x0a5, /* display all points, ST7565 */ + U8G_ESC_DLY(100), /* delay 100 ms */ + U8G_ESC_DLY(100), /* delay 100 ms */ + 0x0a4, /* normal display */ + U8G_ESC_CS(0), /* disable chip */ + U8G_ESC_END /* end of sequence */ +}; +#endif + +/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */ +static const uint8_t u8g_dev_st7565_lm6063_init_seq[] PROGMEM = { + U8G_ESC_CS(0), /* disable chip */ + U8G_ESC_ADR(0), /* instruction mode */ + U8G_ESC_CS(1), /* enable chip */ + U8G_ESC_RST(15), /* do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/ + + 0x0a3, /* 0x0a2: LCD bias 1/9 (suggested for the LM6063), 0x0a3: Used by Adafruit */ + 0x0a1, /* 0x0a1: ADC set to reverse (suggested for the LM6063), 0x0a0: Used by Adafruit -> normal mode */ + 0x0c0, /* common output mode: set scan direction normal operation/SHL Select, 0x0c0 --> SHL = 0, normal, 0x0c8 --> SHL = 1 */ + 0x040, /* set display start line */ + + 0x028 | 0x04, /* power control: turn on voltage converter */ + U8G_ESC_DLY(50), /* delay 50 ms */ + + 0x028 | 0x06, /* power control: turn on voltage regulator */ + U8G_ESC_DLY(50), /* delay 50 ms */ + + 0x028 | 0x07, /* power control: turn on voltage follower */ + U8G_ESC_DLY(50), /* delay 50 ms */ + + 0x026, /* set V0 voltage resistor ratio to 6 (Adafruit Value, no info from LM6063 Manual) */ + + 0x0a6, /* display normal, bit val 0: LCD pixel off. */ + + 0x081, /* set contrast */ + 0x018, /* contrast value*/ + + /*0x0ac,*/ /* indicator */ + /*0x000,*/ /* disable */ + + 0x0af, /* display on */ + + U8G_ESC_DLY(100), /* delay 100 ms */ + 0x0a5, /* display all points, ST7565 */ + U8G_ESC_DLY(100), /* delay 100 ms */ + U8G_ESC_DLY(100), /* delay 100 ms */ + 0x0a4, /* normal display */ + U8G_ESC_CS(0), /* disable chip */ + U8G_ESC_END /* end of sequence */ +}; + +static const uint8_t u8g_dev_st7565_lm6063_data_start[] PROGMEM = { + U8G_ESC_ADR(0), /* instruction mode */ + U8G_ESC_CS(1), /* enable chip */ + 0x010, /* set upper 4 bit of the col adr to 0 */ + 0x000, /* set lower 4 bit of the col adr to 0 */ + U8G_ESC_END /* end of sequence */ +}; + +static const uint8_t u8g_dev_st7565_st7565_sleep_on[] PROGMEM = { + U8G_ESC_ADR(0), /* instruction mode */ + U8G_ESC_CS(1), /* enable chip */ + 0x0ac, /* static indicator off */ + 0x000, /* indicator register set (not sure if this is required) */ + 0x0ae, /* display off */ + 0x0a5, /* all points on */ + U8G_ESC_CS(1), /* disable chip */ + U8G_ESC_END /* end of sequence */ +}; + +static const uint8_t u8g_dev_st7565_st7565_sleep_off[] PROGMEM = { + U8G_ESC_ADR(0), /* instruction mode */ + U8G_ESC_CS(1), /* enable chip */ + 0x0a4, /* all points off */ + 0x0af, /* display on */ + U8G_ESC_DLY(50), /* delay 50 ms */ + U8G_ESC_CS(1), /* disable chip */ + U8G_ESC_END /* end of sequence */ +}; + + +uint8_t u8g_dev_st7565_lm6063_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) +{ + switch(msg) + { + case U8G_DEV_MSG_INIT: + u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS); + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_init_seq); + break; + case U8G_DEV_MSG_STOP: + break; + case U8G_DEV_MSG_PAGE_NEXT: + { + u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_data_start); + u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */ + u8g_SetAddress(u8g, dev, 1); /* data mode */ + if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 ) + return 0; + u8g_SetChipSelect(u8g, dev, 0); + } + break; + case U8G_DEV_MSG_CONTRAST: + u8g_SetChipSelect(u8g, dev, 1); + u8g_SetAddress(u8g, dev, 0); /* instruction mode */ + u8g_WriteByte(u8g, dev, 0x081); + u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); + u8g_SetChipSelect(u8g, dev, 0); + return 1; + case U8G_DEV_MSG_SLEEP_ON: + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_on); + return 1; + case U8G_DEV_MSG_SLEEP_OFF: + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_off); + return 1; + } + return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg); +} + +uint8_t u8g_dev_st7565_lm6063_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) +{ + switch(msg) + { + case U8G_DEV_MSG_INIT: + u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS); + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_init_seq); + break; + case U8G_DEV_MSG_STOP: + break; + case U8G_DEV_MSG_PAGE_NEXT: + { + u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); + + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_data_start); + u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */ + u8g_SetAddress(u8g, dev, 1); /* data mode */ + u8g_WriteSequence(u8g, dev, pb->width, pb->buf); + u8g_SetChipSelect(u8g, dev, 0); + + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6063_data_start); + u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */ + u8g_SetAddress(u8g, dev, 1); /* data mode */ + u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); + u8g_SetChipSelect(u8g, dev, 0); + } + break; + case U8G_DEV_MSG_CONTRAST: + u8g_SetChipSelect(u8g, dev, 1); + u8g_SetAddress(u8g, dev, 0); /* instruction mode */ + u8g_WriteByte(u8g, dev, 0x081); + u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); + u8g_SetChipSelect(u8g, dev, 0); + return 1; + case U8G_DEV_MSG_SLEEP_ON: + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_on); + return 1; + case U8G_DEV_MSG_SLEEP_OFF: + u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_st7565_sleep_off); + return 1; + } + return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg); +} + +U8G_PB_DEV(u8g_dev_st7565_lm6063_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6063_fn, U8G_COM_SW_SPI); +U8G_PB_DEV(u8g_dev_st7565_lm6063_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_lm6063_fn, U8G_COM_HW_SPI); + +uint8_t u8g_dev_st7565_lm6063_2x_buf[WIDTH*2] U8G_NOCOMMON ; +u8g_pb_t u8g_dev_st7565_lm6063_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_lm6063_2x_buf}; +u8g_dev_t u8g_dev_st7565_lm6063_2x_sw_spi = { u8g_dev_st7565_lm6063_2x_fn, &u8g_dev_st7565_lm6063_2x_pb, U8G_COM_SW_SPI }; +u8g_dev_t u8g_dev_st7565_lm6063_2x_hw_spi = { u8g_dev_st7565_lm6063_2x_fn, &u8g_dev_st7565_lm6063_2x_pb, U8G_COM_HW_SPI }; +