diff --git a/libraries/CMSIS/Include/arm_math.h b/libraries/CMSIS/Include/arm_math.h
deleted file mode 100644
--- a/libraries/CMSIS/Include/arm_math.h
+++ /dev/null
@@ -1,7306 +0,0 @@
-/* ----------------------------------------------------------------------
-* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
-*
-* $Date: 17. January 2013
-* $Revision: V1.4.1
-*
-* Project: CMSIS DSP Library
-* Title: arm_math.h
-*
-* Description: Public header file for CMSIS DSP Library
-*
-* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-* - Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* - Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in
-* the documentation and/or other materials provided with the
-* distribution.
-* - Neither the name of ARM LIMITED nor the names of its contributors
-* may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-* POSSIBILITY OF SUCH DAMAGE.
- * -------------------------------------------------------------------- */
-
-/**
- \mainpage CMSIS DSP Software Library
- *
- * Introduction
- *
- * This user manual describes the CMSIS DSP software library,
- * a suite of common signal processing functions for use on Cortex-M processor based devices.
- *
- * The library is divided into a number of functions each covering a specific category:
- * - Basic math functions
- * - Fast math functions
- * - Complex math functions
- * - Filters
- * - Matrix functions
- * - Transforms
- * - Motor control functions
- * - Statistical functions
- * - Support functions
- * - Interpolation functions
- *
- * The library has separate functions for operating on 8-bit integers, 16-bit integers,
- * 32-bit integer and 32-bit floating-point values.
- *
- * Using the Library
- *
- * The library installer contains prebuilt versions of the libraries in the Lib folder.
- * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
- * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
- * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
- * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
- * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
- * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
- * - arm_cortexM0l_math.lib (Little endian on Cortex-M0)
- * - arm_cortexM0b_math.lib (Big endian on Cortex-M3)
- *
- * The library functions are declared in the public file arm_math.h which is placed in the Include folder.
- * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
- * public header file arm_math.h for Cortex-M4/M3/M0 with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
- * Define the appropriate pre processor MACRO ARM_MATH_CM4 or ARM_MATH_CM3 or
- * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
- *
- * Examples
- *
- * The library ships with a number of examples which demonstrate how to use the library functions.
- *
- * Toolchain Support
- *
- * The library has been developed and tested with MDK-ARM version 4.60.
- * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
- *
- * Building the Library
- *
- * The library installer contains project files to re build libraries on MDK Tool chain in the CMSIS\\DSP_Lib\\Source\\ARM folder.
- * - arm_cortexM0b_math.uvproj
- * - arm_cortexM0l_math.uvproj
- * - arm_cortexM3b_math.uvproj
- * - arm_cortexM3l_math.uvproj
- * - arm_cortexM4b_math.uvproj
- * - arm_cortexM4l_math.uvproj
- * - arm_cortexM4bf_math.uvproj
- * - arm_cortexM4lf_math.uvproj
- *
- *
- * The project can be built by opening the appropriate project in MDK-ARM 4.60 chain and defining the optional pre processor MACROs detailed above.
- *
- * Pre-processor Macros
- *
- * Each library project have differant pre-processor macros.
- *
- * - UNALIGNED_SUPPORT_DISABLE:
- *
- * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
- *
- * - ARM_MATH_BIG_ENDIAN:
- *
- * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
- *
- * - ARM_MATH_MATRIX_CHECK:
- *
- * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
- *
- * - ARM_MATH_ROUNDING:
- *
- * Define macro ARM_MATH_ROUNDING for rounding on support functions
- *
- * - ARM_MATH_CMx:
- *
- * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
- * and ARM_MATH_CM0 for building library on cortex-M0 target, ARM_MATH_CM0PLUS for building library on cortex-M0+ target.
- *
- * - __FPU_PRESENT:
- *
- * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
- *
- * Copyright Notice
- *
- * Copyright (C) 2010-2013 ARM Limited. All rights reserved.
- */
-
-
-/**
- * @defgroup groupMath Basic Math Functions
- */
-
-/**
- * @defgroup groupFastMath Fast Math Functions
- * This set of functions provides a fast approximation to sine, cosine, and square root.
- * As compared to most of the other functions in the CMSIS math library, the fast math functions
- * operate on individual values and not arrays.
- * There are separate functions for Q15, Q31, and floating-point data.
- *
- */
-
-/**
- * @defgroup groupCmplxMath Complex Math Functions
- * This set of functions operates on complex data vectors.
- * The data in the complex arrays is stored in an interleaved fashion
- * (real, imag, real, imag, ...).
- * In the API functions, the number of samples in a complex array refers
- * to the number of complex values; the array contains twice this number of
- * real values.
- */
-
-/**
- * @defgroup groupFilters Filtering Functions
- */
-
-/**
- * @defgroup groupMatrix Matrix Functions
- *
- * This set of functions provides basic matrix math operations.
- * The functions operate on matrix data structures. For example,
- * the type
- * definition for the floating-point matrix structure is shown
- * below:
- *
- * typedef struct
- * {
- * uint16_t numRows; // number of rows of the matrix.
- * uint16_t numCols; // number of columns of the matrix.
- * float32_t *pData; // points to the data of the matrix.
- * } arm_matrix_instance_f32;
- *
- * There are similar definitions for Q15 and Q31 data types.
- *
- * The structure specifies the size of the matrix and then points to
- * an array of data. The array is of size numRows X numCols
- * and the values are arranged in row order. That is, the
- * matrix element (i, j) is stored at:
- *
- * pData[i*numCols + j]
- *
- *
- * \par Init Functions
- * There is an associated initialization function for each type of matrix
- * data structure.
- * The initialization function sets the values of the internal structure fields.
- * Refer to the function arm_mat_init_f32(), arm_mat_init_q31()
- * and arm_mat_init_q15() for floating-point, Q31 and Q15 types, respectively.
- *
- * \par
- * Use of the initialization function is optional. However, if initialization function is used
- * then the instance structure cannot be placed into a const data section.
- * To place the instance structure in a const data
- * section, manually initialize the data structure. For example:
- *
- * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
- * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
- * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
- *
- * where nRows specifies the number of rows, nColumns
- * specifies the number of columns, and pData points to the
- * data array.
- *
- * \par Size Checking
- * By default all of the matrix functions perform size checking on the input and
- * output matrices. For example, the matrix addition function verifies that the
- * two input matrices and the output matrix all have the same number of rows and
- * columns. If the size check fails the functions return:
- *
- * ARM_MATH_SIZE_MISMATCH
- *
- * Otherwise the functions return
- *
- * ARM_MATH_SUCCESS
- *
- * There is some overhead associated with this matrix size checking.
- * The matrix size checking is enabled via the \#define
- *
- * ARM_MATH_MATRIX_CHECK
- *
- * within the library project settings. By default this macro is defined
- * and size checking is enabled. By changing the project settings and
- * undefining this macro size checking is eliminated and the functions
- * run a bit faster. With size checking disabled the functions always
- * return ARM_MATH_SUCCESS.
- */
-
-/**
- * @defgroup groupTransforms Transform Functions
- */
-
-/**
- * @defgroup groupController Controller Functions
- */
-
-/**
- * @defgroup groupStats Statistics Functions
- */
-/**
- * @defgroup groupSupport Support Functions
- */
-
-/**
- * @defgroup groupInterpolation Interpolation Functions
- * These functions perform 1- and 2-dimensional interpolation of data.
- * Linear interpolation is used for 1-dimensional data and
- * bilinear interpolation is used for 2-dimensional data.
- */
-
-/**
- * @defgroup groupExamples Examples
- */
-#ifndef _ARM_MATH_H
-#define _ARM_MATH_H
-
-#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
-
-#if defined (ARM_MATH_CM4)
-#include "core_cm4.h"
-#elif defined (ARM_MATH_CM3)
-#include "core_cm3.h"
-#elif defined (ARM_MATH_CM0)
-#include "core_cm0.h"
-#define ARM_MATH_CM0_FAMILY
-#elif defined (ARM_MATH_CM0PLUS)
-#include "core_cm0plus.h"
-#define ARM_MATH_CM0_FAMILY
-#else
-#include "ARMCM4.h"
-#warning "Define either ARM_MATH_CM4 OR ARM_MATH_CM3...By Default building on ARM_MATH_CM4....."
-#endif
-
-#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
-#include "string.h"
-#include "math.h"
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-
- /**
- * @brief Macros required for reciprocal calculation in Normalized LMS
- */
-
-#define DELTA_Q31 (0x100)
-#define DELTA_Q15 0x5
-#define INDEX_MASK 0x0000003F
-#ifndef PI
-#define PI 3.14159265358979f
-#endif
-
- /**
- * @brief Macros required for SINE and COSINE Fast math approximations
- */
-
-#define TABLE_SIZE 256
-#define TABLE_SPACING_Q31 0x800000
-#define TABLE_SPACING_Q15 0x80
-
- /**
- * @brief Macros required for SINE and COSINE Controller functions
- */
- /* 1.31(q31) Fixed value of 2/360 */
- /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
-#define INPUT_SPACING 0xB60B61
-
- /**
- * @brief Macro for Unaligned Support
- */
-#ifndef UNALIGNED_SUPPORT_DISABLE
- #define ALIGN4
-#else
- #if defined (__GNUC__)
- #define ALIGN4 __attribute__((aligned(4)))
- #else
- #define ALIGN4 __align(4)
- #endif
-#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
-
- /**
- * @brief Error status returned by some functions in the library.
- */
-
- typedef enum
- {
- ARM_MATH_SUCCESS = 0, /**< No error */
- ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
- ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
- ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
- ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
- ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
- ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
- } arm_status;
-
- /**
- * @brief 8-bit fractional data type in 1.7 format.
- */
- typedef int8_t q7_t;
-
- /**
- * @brief 16-bit fractional data type in 1.15 format.
- */
- typedef int16_t q15_t;
-
- /**
- * @brief 32-bit fractional data type in 1.31 format.
- */
- typedef int32_t q31_t;
-
- /**
- * @brief 64-bit fractional data type in 1.63 format.
- */
- typedef int64_t q63_t;
-
- /**
- * @brief 32-bit floating-point type definition.
- */
- typedef float float32_t;
-
- /**
- * @brief 64-bit floating-point type definition.
- */
- typedef double float64_t;
-
- /**
- * @brief definition to read/write two 16 bit values.
- */
-#if defined __CC_ARM
-#define __SIMD32_TYPE int32_t __packed
-#define CMSIS_UNUSED __attribute__((unused))
-#elif defined __ICCARM__
-#define CMSIS_UNUSED
-#define __SIMD32_TYPE int32_t __packed
-#elif defined __GNUC__
-#define __SIMD32_TYPE int32_t
-#define CMSIS_UNUSED __attribute__((unused))
-#else
-#error Unknown compiler
-#endif
-
-#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
-#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
-
-#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
-
-#define __SIMD64(addr) (*(int64_t **) & (addr))
-
-#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
- /**
- * @brief definition to pack two 16 bit values.
- */
-#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
- (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
-#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
- (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
-
-#endif
-
-
- /**
- * @brief definition to pack four 8 bit values.
- */
-#ifndef ARM_MATH_BIG_ENDIAN
-
-#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
- (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
- (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
- (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
-#else
-
-#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
- (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
- (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
- (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
-
-#endif
-
-
- /**
- * @brief Clips Q63 to Q31 values.
- */
- static __INLINE q31_t clip_q63_to_q31(
- q63_t x)
- {
- return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
- ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
- }
-
- /**
- * @brief Clips Q63 to Q15 values.
- */
- static __INLINE q15_t clip_q63_to_q15(
- q63_t x)
- {
- return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
- ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
- }
-
- /**
- * @brief Clips Q31 to Q7 values.
- */
- static __INLINE q7_t clip_q31_to_q7(
- q31_t x)
- {
- return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
- ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
- }
-
- /**
- * @brief Clips Q31 to Q15 values.
- */
- static __INLINE q15_t clip_q31_to_q15(
- q31_t x)
- {
- return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
- ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
- }
-
- /**
- * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
- */
-
- static __INLINE q63_t mult32x64(
- q63_t x,
- q31_t y)
- {
- return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
- (((q63_t) (x >> 32) * y)));
- }
-
-
-#if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
-#define __CLZ __clz
-#endif
-
-#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) ||(defined (__GNUC__)) || defined (__TASKING__) )
-
- static __INLINE uint32_t __CLZ(
- q31_t data);
-
-
- static __INLINE uint32_t __CLZ(
- q31_t data)
- {
- uint32_t count = 0;
- uint32_t mask = 0x80000000;
-
- while((data & mask) == 0)
- {
- count += 1u;
- mask = mask >> 1u;
- }
-
- return (count);
-
- }
-
-#endif
-
- /**
- * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
- */
-
- static __INLINE uint32_t arm_recip_q31(
- q31_t in,
- q31_t * dst,
- q31_t * pRecipTable)
- {
-
- uint32_t out, tempVal;
- uint32_t index, i;
- uint32_t signBits;
-
- if(in > 0)
- {
- signBits = __CLZ(in) - 1;
- }
- else
- {
- signBits = __CLZ(-in) - 1;
- }
-
- /* Convert input sample to 1.31 format */
- in = in << signBits;
-
- /* calculation of index for initial approximated Val */
- index = (uint32_t) (in >> 24u);
- index = (index & INDEX_MASK);
-
- /* 1.31 with exp 1 */
- out = pRecipTable[index];
-
- /* calculation of reciprocal value */
- /* running approximation for two iterations */
- for (i = 0u; i < 2u; i++)
- {
- tempVal = (q31_t) (((q63_t) in * out) >> 31u);
- tempVal = 0x7FFFFFFF - tempVal;
- /* 1.31 with exp 1 */
- //out = (q31_t) (((q63_t) out * tempVal) >> 30u);
- out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u);
- }
-
- /* write output */
- *dst = out;
-
- /* return num of signbits of out = 1/in value */
- return (signBits + 1u);
-
- }
-
- /**
- * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
- */
- static __INLINE uint32_t arm_recip_q15(
- q15_t in,
- q15_t * dst,
- q15_t * pRecipTable)
- {
-
- uint32_t out = 0, tempVal = 0;
- uint32_t index = 0, i = 0;
- uint32_t signBits = 0;
-
- if(in > 0)
- {
- signBits = __CLZ(in) - 17;
- }
- else
- {
- signBits = __CLZ(-in) - 17;
- }
-
- /* Convert input sample to 1.15 format */
- in = in << signBits;
-
- /* calculation of index for initial approximated Val */
- index = in >> 8;
- index = (index & INDEX_MASK);
-
- /* 1.15 with exp 1 */
- out = pRecipTable[index];
-
- /* calculation of reciprocal value */
- /* running approximation for two iterations */
- for (i = 0; i < 2; i++)
- {
- tempVal = (q15_t) (((q31_t) in * out) >> 15);
- tempVal = 0x7FFF - tempVal;
- /* 1.15 with exp 1 */
- out = (q15_t) (((q31_t) out * tempVal) >> 14);
- }
-
- /* write output */
- *dst = out;
-
- /* return num of signbits of out = 1/in value */
- return (signBits + 1);
-
- }
-
-
- /*
- * @brief C custom defined intrinisic function for only M0 processors
- */
-#if defined(ARM_MATH_CM0_FAMILY)
-
- static __INLINE q31_t __SSAT(
- q31_t x,
- uint32_t y)
- {
- int32_t posMax, negMin;
- uint32_t i;
-
- posMax = 1;
- for (i = 0; i < (y - 1); i++)
- {
- posMax = posMax * 2;
- }
-
- if(x > 0)
- {
- posMax = (posMax - 1);
-
- if(x > posMax)
- {
- x = posMax;
- }
- }
- else
- {
- negMin = -posMax;
-
- if(x < negMin)
- {
- x = negMin;
- }
- }
- return (x);
-
-
- }
-
-#endif /* end of ARM_MATH_CM0_FAMILY */
-
-
-
- /*
- * @brief C custom defined intrinsic function for M3 and M0 processors
- */
-#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
-
- /*
- * @brief C custom defined QADD8 for M3 and M0 processors
- */
- static __INLINE q31_t __QADD8(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum;
- q7_t r, s, t, u;
-
- r = (q7_t) x;
- s = (q7_t) y;
-
- r = __SSAT((q31_t) (r + s), 8);
- s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8);
- t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8);
- u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8);
-
- sum =
- (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) |
- (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF);
-
- return sum;
-
- }
-
- /*
- * @brief C custom defined QSUB8 for M3 and M0 processors
- */
- static __INLINE q31_t __QSUB8(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum;
- q31_t r, s, t, u;
-
- r = (q7_t) x;
- s = (q7_t) y;
-
- r = __SSAT((r - s), 8);
- s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8;
- t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16;
- u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24;
-
- sum =
- (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r &
- 0x000000FF);
-
- return sum;
- }
-
- /*
- * @brief C custom defined QADD16 for M3 and M0 processors
- */
-
- /*
- * @brief C custom defined QADD16 for M3 and M0 processors
- */
- static __INLINE q31_t __QADD16(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum;
- q31_t r, s;
-
- r = (short) x;
- s = (short) y;
-
- r = __SSAT(r + s, 16);
- s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16;
-
- sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
-
- return sum;
-
- }
-
- /*
- * @brief C custom defined SHADD16 for M3 and M0 processors
- */
- static __INLINE q31_t __SHADD16(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum;
- q31_t r, s;
-
- r = (short) x;
- s = (short) y;
-
- r = ((r >> 1) + (s >> 1));
- s = ((q31_t) ((x >> 17) + (y >> 17))) << 16;
-
- sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
-
- return sum;
-
- }
-
- /*
- * @brief C custom defined QSUB16 for M3 and M0 processors
- */
- static __INLINE q31_t __QSUB16(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum;
- q31_t r, s;
-
- r = (short) x;
- s = (short) y;
-
- r = __SSAT(r - s, 16);
- s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16;
-
- sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
-
- return sum;
- }
-
- /*
- * @brief C custom defined SHSUB16 for M3 and M0 processors
- */
- static __INLINE q31_t __SHSUB16(
- q31_t x,
- q31_t y)
- {
-
- q31_t diff;
- q31_t r, s;
-
- r = (short) x;
- s = (short) y;
-
- r = ((r >> 1) - (s >> 1));
- s = (((x >> 17) - (y >> 17)) << 16);
-
- diff = (s & 0xFFFF0000) | (r & 0x0000FFFF);
-
- return diff;
- }
-
- /*
- * @brief C custom defined QASX for M3 and M0 processors
- */
- static __INLINE q31_t __QASX(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum = 0;
-
- sum =
- ((sum +
- clip_q31_to_q15((q31_t) ((short) (x >> 16) + (short) y))) << 16) +
- clip_q31_to_q15((q31_t) ((short) x - (short) (y >> 16)));
-
- return sum;
- }
-
- /*
- * @brief C custom defined SHASX for M3 and M0 processors
- */
- static __INLINE q31_t __SHASX(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum;
- q31_t r, s;
-
- r = (short) x;
- s = (short) y;
-
- r = ((r >> 1) - (y >> 17));
- s = (((x >> 17) + (s >> 1)) << 16);
-
- sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
-
- return sum;
- }
-
-
- /*
- * @brief C custom defined QSAX for M3 and M0 processors
- */
- static __INLINE q31_t __QSAX(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum = 0;
-
- sum =
- ((sum +
- clip_q31_to_q15((q31_t) ((short) (x >> 16) - (short) y))) << 16) +
- clip_q31_to_q15((q31_t) ((short) x + (short) (y >> 16)));
-
- return sum;
- }
-
- /*
- * @brief C custom defined SHSAX for M3 and M0 processors
- */
- static __INLINE q31_t __SHSAX(
- q31_t x,
- q31_t y)
- {
-
- q31_t sum;
- q31_t r, s;
-
- r = (short) x;
- s = (short) y;
-
- r = ((r >> 1) + (y >> 17));
- s = (((x >> 17) - (s >> 1)) << 16);
-
- sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
-
- return sum;
- }
-
- /*
- * @brief C custom defined SMUSDX for M3 and M0 processors
- */
- static __INLINE q31_t __SMUSDX(
- q31_t x,
- q31_t y)
- {
-
- return ((q31_t) (((short) x * (short) (y >> 16)) -
- ((short) (x >> 16) * (short) y)));
- }
-
- /*
- * @brief C custom defined SMUADX for M3 and M0 processors
- */
- static __INLINE q31_t __SMUADX(
- q31_t x,
- q31_t y)
- {
-
- return ((q31_t) (((short) x * (short) (y >> 16)) +
- ((short) (x >> 16) * (short) y)));
- }
-
- /*
- * @brief C custom defined QADD for M3 and M0 processors
- */
- static __INLINE q31_t __QADD(
- q31_t x,
- q31_t y)
- {
- return clip_q63_to_q31((q63_t) x + y);
- }
-
- /*
- * @brief C custom defined QSUB for M3 and M0 processors
- */
- static __INLINE q31_t __QSUB(
- q31_t x,
- q31_t y)
- {
- return clip_q63_to_q31((q63_t) x - y);
- }
-
- /*
- * @brief C custom defined SMLAD for M3 and M0 processors
- */
- static __INLINE q31_t __SMLAD(
- q31_t x,
- q31_t y,
- q31_t sum)
- {
-
- return (sum + ((short) (x >> 16) * (short) (y >> 16)) +
- ((short) x * (short) y));
- }
-
- /*
- * @brief C custom defined SMLADX for M3 and M0 processors
- */
- static __INLINE q31_t __SMLADX(
- q31_t x,
- q31_t y,
- q31_t sum)
- {
-
- return (sum + ((short) (x >> 16) * (short) (y)) +
- ((short) x * (short) (y >> 16)));
- }
-
- /*
- * @brief C custom defined SMLSDX for M3 and M0 processors
- */
- static __INLINE q31_t __SMLSDX(
- q31_t x,
- q31_t y,
- q31_t sum)
- {
-
- return (sum - ((short) (x >> 16) * (short) (y)) +
- ((short) x * (short) (y >> 16)));
- }
-
- /*
- * @brief C custom defined SMLALD for M3 and M0 processors
- */
- static __INLINE q63_t __SMLALD(
- q31_t x,
- q31_t y,
- q63_t sum)
- {
-
- return (sum + ((short) (x >> 16) * (short) (y >> 16)) +
- ((short) x * (short) y));
- }
-
- /*
- * @brief C custom defined SMLALDX for M3 and M0 processors
- */
- static __INLINE q63_t __SMLALDX(
- q31_t x,
- q31_t y,
- q63_t sum)
- {
-
- return (sum + ((short) (x >> 16) * (short) y)) +
- ((short) x * (short) (y >> 16));
- }
-
- /*
- * @brief C custom defined SMUAD for M3 and M0 processors
- */
- static __INLINE q31_t __SMUAD(
- q31_t x,
- q31_t y)
- {
-
- return (((x >> 16) * (y >> 16)) +
- (((x << 16) >> 16) * ((y << 16) >> 16)));
- }
-
- /*
- * @brief C custom defined SMUSD for M3 and M0 processors
- */
- static __INLINE q31_t __SMUSD(
- q31_t x,
- q31_t y)
- {
-
- return (-((x >> 16) * (y >> 16)) +
- (((x << 16) >> 16) * ((y << 16) >> 16)));
- }
-
-
- /*
- * @brief C custom defined SXTB16 for M3 and M0 processors
- */
- static __INLINE q31_t __SXTB16(
- q31_t x)
- {
-
- return ((((x << 24) >> 24) & 0x0000FFFF) |
- (((x << 8) >> 8) & 0xFFFF0000));
- }
-
-
-#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
-
-
- /**
- * @brief Instance structure for the Q7 FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- } arm_fir_instance_q7;
-
- /**
- * @brief Instance structure for the Q15 FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- } arm_fir_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- } arm_fir_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- } arm_fir_instance_f32;
-
-
- /**
- * @brief Processing function for the Q7 FIR filter.
- * @param[in] *S points to an instance of the Q7 FIR filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
- void arm_fir_q7(
- const arm_fir_instance_q7 * S,
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q7 FIR filter.
- * @param[in,out] *S points to an instance of the Q7 FIR structure.
- * @param[in] numTaps Number of filter coefficients in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed.
- * @return none
- */
- void arm_fir_init_q7(
- arm_fir_instance_q7 * S,
- uint16_t numTaps,
- q7_t * pCoeffs,
- q7_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q15 FIR filter.
- * @param[in] *S points to an instance of the Q15 FIR structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
- void arm_fir_q15(
- const arm_fir_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
- * @param[in] *S points to an instance of the Q15 FIR filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
- void arm_fir_fast_q15(
- const arm_fir_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q15 FIR filter.
- * @param[in,out] *S points to an instance of the Q15 FIR filter structure.
- * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed at a time.
- * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
- * numTaps is not a supported value.
- */
-
- arm_status arm_fir_init_q15(
- arm_fir_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q31 FIR filter.
- * @param[in] *S points to an instance of the Q31 FIR filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
- void arm_fir_q31(
- const arm_fir_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
- * @param[in] *S points to an instance of the Q31 FIR structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
- void arm_fir_fast_q31(
- const arm_fir_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q31 FIR filter.
- * @param[in,out] *S points to an instance of the Q31 FIR structure.
- * @param[in] numTaps Number of filter coefficients in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed at a time.
- * @return none.
- */
- void arm_fir_init_q31(
- arm_fir_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the floating-point FIR filter.
- * @param[in] *S points to an instance of the floating-point FIR structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
- void arm_fir_f32(
- const arm_fir_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the floating-point FIR filter.
- * @param[in,out] *S points to an instance of the floating-point FIR filter structure.
- * @param[in] numTaps Number of filter coefficients in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed at a time.
- * @return none.
- */
- void arm_fir_init_f32(
- arm_fir_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q15 Biquad cascade filter.
- */
- typedef struct
- {
- int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
- q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
- int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
-
- } arm_biquad_casd_df1_inst_q15;
-
-
- /**
- * @brief Instance structure for the Q31 Biquad cascade filter.
- */
- typedef struct
- {
- uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
- q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
- uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
-
- } arm_biquad_casd_df1_inst_q31;
-
- /**
- * @brief Instance structure for the floating-point Biquad cascade filter.
- */
- typedef struct
- {
- uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
- float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
-
-
- } arm_biquad_casd_df1_inst_f32;
-
-
-
- /**
- * @brief Processing function for the Q15 Biquad cascade filter.
- * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_biquad_cascade_df1_q15(
- const arm_biquad_casd_df1_inst_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q15 Biquad cascade filter.
- * @param[in,out] *S points to an instance of the Q15 Biquad cascade structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
- * @return none
- */
-
- void arm_biquad_cascade_df1_init_q15(
- arm_biquad_casd_df1_inst_q15 * S,
- uint8_t numStages,
- q15_t * pCoeffs,
- q15_t * pState,
- int8_t postShift);
-
-
- /**
- * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
- * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_biquad_cascade_df1_fast_q15(
- const arm_biquad_casd_df1_inst_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 Biquad cascade filter
- * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_biquad_cascade_df1_q31(
- const arm_biquad_casd_df1_inst_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
- * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_biquad_cascade_df1_fast_q31(
- const arm_biquad_casd_df1_inst_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q31 Biquad cascade filter.
- * @param[in,out] *S points to an instance of the Q31 Biquad cascade structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
- * @return none
- */
-
- void arm_biquad_cascade_df1_init_q31(
- arm_biquad_casd_df1_inst_q31 * S,
- uint8_t numStages,
- q31_t * pCoeffs,
- q31_t * pState,
- int8_t postShift);
-
- /**
- * @brief Processing function for the floating-point Biquad cascade filter.
- * @param[in] *S points to an instance of the floating-point Biquad cascade structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_biquad_cascade_df1_f32(
- const arm_biquad_casd_df1_inst_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the floating-point Biquad cascade filter.
- * @param[in,out] *S points to an instance of the floating-point Biquad cascade structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @return none
- */
-
- void arm_biquad_cascade_df1_init_f32(
- arm_biquad_casd_df1_inst_f32 * S,
- uint8_t numStages,
- float32_t * pCoeffs,
- float32_t * pState);
-
-
- /**
- * @brief Instance structure for the floating-point matrix structure.
- */
-
- typedef struct
- {
- uint16_t numRows; /**< number of rows of the matrix. */
- uint16_t numCols; /**< number of columns of the matrix. */
- float32_t *pData; /**< points to the data of the matrix. */
- } arm_matrix_instance_f32;
-
- /**
- * @brief Instance structure for the Q15 matrix structure.
- */
-
- typedef struct
- {
- uint16_t numRows; /**< number of rows of the matrix. */
- uint16_t numCols; /**< number of columns of the matrix. */
- q15_t *pData; /**< points to the data of the matrix. */
-
- } arm_matrix_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 matrix structure.
- */
-
- typedef struct
- {
- uint16_t numRows; /**< number of rows of the matrix. */
- uint16_t numCols; /**< number of columns of the matrix. */
- q31_t *pData; /**< points to the data of the matrix. */
-
- } arm_matrix_instance_q31;
-
-
-
- /**
- * @brief Floating-point matrix addition.
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_add_f32(
- const arm_matrix_instance_f32 * pSrcA,
- const arm_matrix_instance_f32 * pSrcB,
- arm_matrix_instance_f32 * pDst);
-
- /**
- * @brief Q15 matrix addition.
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_add_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst);
-
- /**
- * @brief Q31 matrix addition.
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_add_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point matrix transpose.
- * @param[in] *pSrc points to the input matrix
- * @param[out] *pDst points to the output matrix
- * @return The function returns either ARM_MATH_SIZE_MISMATCH
- * or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_trans_f32(
- const arm_matrix_instance_f32 * pSrc,
- arm_matrix_instance_f32 * pDst);
-
-
- /**
- * @brief Q15 matrix transpose.
- * @param[in] *pSrc points to the input matrix
- * @param[out] *pDst points to the output matrix
- * @return The function returns either ARM_MATH_SIZE_MISMATCH
- * or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_trans_q15(
- const arm_matrix_instance_q15 * pSrc,
- arm_matrix_instance_q15 * pDst);
-
- /**
- * @brief Q31 matrix transpose.
- * @param[in] *pSrc points to the input matrix
- * @param[out] *pDst points to the output matrix
- * @return The function returns either ARM_MATH_SIZE_MISMATCH
- * or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_trans_q31(
- const arm_matrix_instance_q31 * pSrc,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point matrix multiplication
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_mult_f32(
- const arm_matrix_instance_f32 * pSrcA,
- const arm_matrix_instance_f32 * pSrcB,
- arm_matrix_instance_f32 * pDst);
-
- /**
- * @brief Q15 matrix multiplication
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @param[in] *pState points to the array for storing intermediate results
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_mult_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst,
- q15_t * pState);
-
- /**
- * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @param[in] *pState points to the array for storing intermediate results
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_mult_fast_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst,
- q15_t * pState);
-
- /**
- * @brief Q31 matrix multiplication
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_mult_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
- /**
- * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_mult_fast_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point matrix subtraction
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_sub_f32(
- const arm_matrix_instance_f32 * pSrcA,
- const arm_matrix_instance_f32 * pSrcB,
- arm_matrix_instance_f32 * pDst);
-
- /**
- * @brief Q15 matrix subtraction
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_sub_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst);
-
- /**
- * @brief Q31 matrix subtraction
- * @param[in] *pSrcA points to the first input matrix structure
- * @param[in] *pSrcB points to the second input matrix structure
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_sub_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
- /**
- * @brief Floating-point matrix scaling.
- * @param[in] *pSrc points to the input matrix
- * @param[in] scale scale factor
- * @param[out] *pDst points to the output matrix
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_scale_f32(
- const arm_matrix_instance_f32 * pSrc,
- float32_t scale,
- arm_matrix_instance_f32 * pDst);
-
- /**
- * @brief Q15 matrix scaling.
- * @param[in] *pSrc points to input matrix
- * @param[in] scaleFract fractional portion of the scale factor
- * @param[in] shift number of bits to shift the result by
- * @param[out] *pDst points to output matrix
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_scale_q15(
- const arm_matrix_instance_q15 * pSrc,
- q15_t scaleFract,
- int32_t shift,
- arm_matrix_instance_q15 * pDst);
-
- /**
- * @brief Q31 matrix scaling.
- * @param[in] *pSrc points to input matrix
- * @param[in] scaleFract fractional portion of the scale factor
- * @param[in] shift number of bits to shift the result by
- * @param[out] *pDst points to output matrix structure
- * @return The function returns either
- * ARM_MATH_SIZE_MISMATCH or ARM_MATH_SUCCESS based on the outcome of size checking.
- */
-
- arm_status arm_mat_scale_q31(
- const arm_matrix_instance_q31 * pSrc,
- q31_t scaleFract,
- int32_t shift,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Q31 matrix initialization.
- * @param[in,out] *S points to an instance of the floating-point matrix structure.
- * @param[in] nRows number of rows in the matrix.
- * @param[in] nColumns number of columns in the matrix.
- * @param[in] *pData points to the matrix data array.
- * @return none
- */
-
- void arm_mat_init_q31(
- arm_matrix_instance_q31 * S,
- uint16_t nRows,
- uint16_t nColumns,
- q31_t * pData);
-
- /**
- * @brief Q15 matrix initialization.
- * @param[in,out] *S points to an instance of the floating-point matrix structure.
- * @param[in] nRows number of rows in the matrix.
- * @param[in] nColumns number of columns in the matrix.
- * @param[in] *pData points to the matrix data array.
- * @return none
- */
-
- void arm_mat_init_q15(
- arm_matrix_instance_q15 * S,
- uint16_t nRows,
- uint16_t nColumns,
- q15_t * pData);
-
- /**
- * @brief Floating-point matrix initialization.
- * @param[in,out] *S points to an instance of the floating-point matrix structure.
- * @param[in] nRows number of rows in the matrix.
- * @param[in] nColumns number of columns in the matrix.
- * @param[in] *pData points to the matrix data array.
- * @return none
- */
-
- void arm_mat_init_f32(
- arm_matrix_instance_f32 * S,
- uint16_t nRows,
- uint16_t nColumns,
- float32_t * pData);
-
-
-
- /**
- * @brief Instance structure for the Q15 PID Control.
- */
- typedef struct
- {
- q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
-#ifdef ARM_MATH_CM0_FAMILY
- q15_t A1;
- q15_t A2;
-#else
- q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
-#endif
- q15_t state[3]; /**< The state array of length 3. */
- q15_t Kp; /**< The proportional gain. */
- q15_t Ki; /**< The integral gain. */
- q15_t Kd; /**< The derivative gain. */
- } arm_pid_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 PID Control.
- */
- typedef struct
- {
- q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
- q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
- q31_t A2; /**< The derived gain, A2 = Kd . */
- q31_t state[3]; /**< The state array of length 3. */
- q31_t Kp; /**< The proportional gain. */
- q31_t Ki; /**< The integral gain. */
- q31_t Kd; /**< The derivative gain. */
-
- } arm_pid_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point PID Control.
- */
- typedef struct
- {
- float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
- float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
- float32_t A2; /**< The derived gain, A2 = Kd . */
- float32_t state[3]; /**< The state array of length 3. */
- float32_t Kp; /**< The proportional gain. */
- float32_t Ki; /**< The integral gain. */
- float32_t Kd; /**< The derivative gain. */
- } arm_pid_instance_f32;
-
-
-
- /**
- * @brief Initialization function for the floating-point PID Control.
- * @param[in,out] *S points to an instance of the PID structure.
- * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
- * @return none.
- */
- void arm_pid_init_f32(
- arm_pid_instance_f32 * S,
- int32_t resetStateFlag);
-
- /**
- * @brief Reset function for the floating-point PID Control.
- * @param[in,out] *S is an instance of the floating-point PID Control structure
- * @return none
- */
- void arm_pid_reset_f32(
- arm_pid_instance_f32 * S);
-
-
- /**
- * @brief Initialization function for the Q31 PID Control.
- * @param[in,out] *S points to an instance of the Q15 PID structure.
- * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
- * @return none.
- */
- void arm_pid_init_q31(
- arm_pid_instance_q31 * S,
- int32_t resetStateFlag);
-
-
- /**
- * @brief Reset function for the Q31 PID Control.
- * @param[in,out] *S points to an instance of the Q31 PID Control structure
- * @return none
- */
-
- void arm_pid_reset_q31(
- arm_pid_instance_q31 * S);
-
- /**
- * @brief Initialization function for the Q15 PID Control.
- * @param[in,out] *S points to an instance of the Q15 PID structure.
- * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
- * @return none.
- */
- void arm_pid_init_q15(
- arm_pid_instance_q15 * S,
- int32_t resetStateFlag);
-
- /**
- * @brief Reset function for the Q15 PID Control.
- * @param[in,out] *S points to an instance of the q15 PID Control structure
- * @return none
- */
- void arm_pid_reset_q15(
- arm_pid_instance_q15 * S);
-
-
- /**
- * @brief Instance structure for the floating-point Linear Interpolate function.
- */
- typedef struct
- {
- uint32_t nValues; /**< nValues */
- float32_t x1; /**< x1 */
- float32_t xSpacing; /**< xSpacing */
- float32_t *pYData; /**< pointer to the table of Y values */
- } arm_linear_interp_instance_f32;
-
- /**
- * @brief Instance structure for the floating-point bilinear interpolation function.
- */
-
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- float32_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_f32;
-
- /**
- * @brief Instance structure for the Q31 bilinear interpolation function.
- */
-
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- q31_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_q31;
-
- /**
- * @brief Instance structure for the Q15 bilinear interpolation function.
- */
-
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- q15_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_q15;
-
- /**
- * @brief Instance structure for the Q15 bilinear interpolation function.
- */
-
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- q7_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_q7;
-
-
- /**
- * @brief Q7 vector multiplication.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_mult_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q15 vector multiplication.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_mult_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q31 vector multiplication.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_mult_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Floating-point vector multiplication.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_mult_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t blockSize);
-
-
-
-
-
-
- /**
- * @brief Instance structure for the Q15 CFFT/CIFFT function.
- */
-
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix2_instance_q15;
-
- arm_status arm_cfft_radix2_init_q15(
- arm_cfft_radix2_instance_q15 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- void arm_cfft_radix2_q15(
- const arm_cfft_radix2_instance_q15 * S,
- q15_t * pSrc);
-
-
-
- /**
- * @brief Instance structure for the Q15 CFFT/CIFFT function.
- */
-
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q15_t *pTwiddle; /**< points to the twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix4_instance_q15;
-
- arm_status arm_cfft_radix4_init_q15(
- arm_cfft_radix4_instance_q15 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- void arm_cfft_radix4_q15(
- const arm_cfft_radix4_instance_q15 * S,
- q15_t * pSrc);
-
- /**
- * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
- */
-
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q31_t *pTwiddle; /**< points to the Twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix2_instance_q31;
-
- arm_status arm_cfft_radix2_init_q31(
- arm_cfft_radix2_instance_q31 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- void arm_cfft_radix2_q31(
- const arm_cfft_radix2_instance_q31 * S,
- q31_t * pSrc);
-
- /**
- * @brief Instance structure for the Q31 CFFT/CIFFT function.
- */
-
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q31_t *pTwiddle; /**< points to the twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix4_instance_q31;
-
-
- void arm_cfft_radix4_q31(
- const arm_cfft_radix4_instance_q31 * S,
- q31_t * pSrc);
-
- arm_status arm_cfft_radix4_init_q31(
- arm_cfft_radix4_instance_q31 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- /**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
-
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- float32_t *pTwiddle; /**< points to the Twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- float32_t onebyfftLen; /**< value of 1/fftLen. */
- } arm_cfft_radix2_instance_f32;
-
-/* Deprecated */
- arm_status arm_cfft_radix2_init_f32(
- arm_cfft_radix2_instance_f32 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
-/* Deprecated */
- void arm_cfft_radix2_f32(
- const arm_cfft_radix2_instance_f32 * S,
- float32_t * pSrc);
-
- /**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
-
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- float32_t *pTwiddle; /**< points to the Twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- float32_t onebyfftLen; /**< value of 1/fftLen. */
- } arm_cfft_radix4_instance_f32;
-
-/* Deprecated */
- arm_status arm_cfft_radix4_init_f32(
- arm_cfft_radix4_instance_f32 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
-/* Deprecated */
- void arm_cfft_radix4_f32(
- const arm_cfft_radix4_instance_f32 * S,
- float32_t * pSrc);
-
- /**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
-
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
- const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t bitRevLength; /**< bit reversal table length. */
- } arm_cfft_instance_f32;
-
- void arm_cfft_f32(
- const arm_cfft_instance_f32 * S,
- float32_t * p1,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- /**
- * @brief Instance structure for the Q15 RFFT/RIFFT function.
- */
-
- typedef struct
- {
- uint32_t fftLenReal; /**< length of the real FFT. */
- uint32_t fftLenBy2; /**< length of the complex FFT. */
- uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
- uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
- uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
- q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
- arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
- } arm_rfft_instance_q15;
-
- arm_status arm_rfft_init_q15(
- arm_rfft_instance_q15 * S,
- arm_cfft_radix4_instance_q15 * S_CFFT,
- uint32_t fftLenReal,
- uint32_t ifftFlagR,
- uint32_t bitReverseFlag);
-
- void arm_rfft_q15(
- const arm_rfft_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst);
-
- /**
- * @brief Instance structure for the Q31 RFFT/RIFFT function.
- */
-
- typedef struct
- {
- uint32_t fftLenReal; /**< length of the real FFT. */
- uint32_t fftLenBy2; /**< length of the complex FFT. */
- uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
- uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
- uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
- q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
- arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
- } arm_rfft_instance_q31;
-
- arm_status arm_rfft_init_q31(
- arm_rfft_instance_q31 * S,
- arm_cfft_radix4_instance_q31 * S_CFFT,
- uint32_t fftLenReal,
- uint32_t ifftFlagR,
- uint32_t bitReverseFlag);
-
- void arm_rfft_q31(
- const arm_rfft_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst);
-
- /**
- * @brief Instance structure for the floating-point RFFT/RIFFT function.
- */
-
- typedef struct
- {
- uint32_t fftLenReal; /**< length of the real FFT. */
- uint16_t fftLenBy2; /**< length of the complex FFT. */
- uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
- uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
- uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
- float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
- arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
- } arm_rfft_instance_f32;
-
- arm_status arm_rfft_init_f32(
- arm_rfft_instance_f32 * S,
- arm_cfft_radix4_instance_f32 * S_CFFT,
- uint32_t fftLenReal,
- uint32_t ifftFlagR,
- uint32_t bitReverseFlag);
-
- void arm_rfft_f32(
- const arm_rfft_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst);
-
- /**
- * @brief Instance structure for the floating-point RFFT/RIFFT function.
- */
-
-typedef struct
- {
- arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
- uint16_t fftLenRFFT; /**< length of the real sequence */
- float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
- } arm_rfft_fast_instance_f32 ;
-
-arm_status arm_rfft_fast_init_f32 (
- arm_rfft_fast_instance_f32 * S,
- uint16_t fftLen);
-
-void arm_rfft_fast_f32(
- arm_rfft_fast_instance_f32 * S,
- float32_t * p, float32_t * pOut,
- uint8_t ifftFlag);
-
- /**
- * @brief Instance structure for the floating-point DCT4/IDCT4 function.
- */
-
- typedef struct
- {
- uint16_t N; /**< length of the DCT4. */
- uint16_t Nby2; /**< half of the length of the DCT4. */
- float32_t normalize; /**< normalizing factor. */
- float32_t *pTwiddle; /**< points to the twiddle factor table. */
- float32_t *pCosFactor; /**< points to the cosFactor table. */
- arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
- arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
- } arm_dct4_instance_f32;
-
- /**
- * @brief Initialization function for the floating-point DCT4/IDCT4.
- * @param[in,out] *S points to an instance of floating-point DCT4/IDCT4 structure.
- * @param[in] *S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
- * @param[in] *S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
- * @param[in] N length of the DCT4.
- * @param[in] Nby2 half of the length of the DCT4.
- * @param[in] normalize normalizing factor.
- * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal is not a supported transform length.
- */
-
- arm_status arm_dct4_init_f32(
- arm_dct4_instance_f32 * S,
- arm_rfft_instance_f32 * S_RFFT,
- arm_cfft_radix4_instance_f32 * S_CFFT,
- uint16_t N,
- uint16_t Nby2,
- float32_t normalize);
-
- /**
- * @brief Processing function for the floating-point DCT4/IDCT4.
- * @param[in] *S points to an instance of the floating-point DCT4/IDCT4 structure.
- * @param[in] *pState points to state buffer.
- * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
- * @return none.
- */
-
- void arm_dct4_f32(
- const arm_dct4_instance_f32 * S,
- float32_t * pState,
- float32_t * pInlineBuffer);
-
- /**
- * @brief Instance structure for the Q31 DCT4/IDCT4 function.
- */
-
- typedef struct
- {
- uint16_t N; /**< length of the DCT4. */
- uint16_t Nby2; /**< half of the length of the DCT4. */
- q31_t normalize; /**< normalizing factor. */
- q31_t *pTwiddle; /**< points to the twiddle factor table. */
- q31_t *pCosFactor; /**< points to the cosFactor table. */
- arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
- arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
- } arm_dct4_instance_q31;
-
- /**
- * @brief Initialization function for the Q31 DCT4/IDCT4.
- * @param[in,out] *S points to an instance of Q31 DCT4/IDCT4 structure.
- * @param[in] *S_RFFT points to an instance of Q31 RFFT/RIFFT structure
- * @param[in] *S_CFFT points to an instance of Q31 CFFT/CIFFT structure
- * @param[in] N length of the DCT4.
- * @param[in] Nby2 half of the length of the DCT4.
- * @param[in] normalize normalizing factor.
- * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length.
- */
-
- arm_status arm_dct4_init_q31(
- arm_dct4_instance_q31 * S,
- arm_rfft_instance_q31 * S_RFFT,
- arm_cfft_radix4_instance_q31 * S_CFFT,
- uint16_t N,
- uint16_t Nby2,
- q31_t normalize);
-
- /**
- * @brief Processing function for the Q31 DCT4/IDCT4.
- * @param[in] *S points to an instance of the Q31 DCT4 structure.
- * @param[in] *pState points to state buffer.
- * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
- * @return none.
- */
-
- void arm_dct4_q31(
- const arm_dct4_instance_q31 * S,
- q31_t * pState,
- q31_t * pInlineBuffer);
-
- /**
- * @brief Instance structure for the Q15 DCT4/IDCT4 function.
- */
-
- typedef struct
- {
- uint16_t N; /**< length of the DCT4. */
- uint16_t Nby2; /**< half of the length of the DCT4. */
- q15_t normalize; /**< normalizing factor. */
- q15_t *pTwiddle; /**< points to the twiddle factor table. */
- q15_t *pCosFactor; /**< points to the cosFactor table. */
- arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
- arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
- } arm_dct4_instance_q15;
-
- /**
- * @brief Initialization function for the Q15 DCT4/IDCT4.
- * @param[in,out] *S points to an instance of Q15 DCT4/IDCT4 structure.
- * @param[in] *S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
- * @param[in] *S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
- * @param[in] N length of the DCT4.
- * @param[in] Nby2 half of the length of the DCT4.
- * @param[in] normalize normalizing factor.
- * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N is not a supported transform length.
- */
-
- arm_status arm_dct4_init_q15(
- arm_dct4_instance_q15 * S,
- arm_rfft_instance_q15 * S_RFFT,
- arm_cfft_radix4_instance_q15 * S_CFFT,
- uint16_t N,
- uint16_t Nby2,
- q15_t normalize);
-
- /**
- * @brief Processing function for the Q15 DCT4/IDCT4.
- * @param[in] *S points to an instance of the Q15 DCT4 structure.
- * @param[in] *pState points to state buffer.
- * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
- * @return none.
- */
-
- void arm_dct4_q15(
- const arm_dct4_instance_q15 * S,
- q15_t * pState,
- q15_t * pInlineBuffer);
-
- /**
- * @brief Floating-point vector addition.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_add_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q7 vector addition.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_add_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q15 vector addition.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_add_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q31 vector addition.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_add_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Floating-point vector subtraction.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_sub_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q7 vector subtraction.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_sub_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q15 vector subtraction.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_sub_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q31 vector subtraction.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_sub_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Multiplies a floating-point vector by a scalar.
- * @param[in] *pSrc points to the input vector
- * @param[in] scale scale factor to be applied
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_scale_f32(
- float32_t * pSrc,
- float32_t scale,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Multiplies a Q7 vector by a scalar.
- * @param[in] *pSrc points to the input vector
- * @param[in] scaleFract fractional portion of the scale value
- * @param[in] shift number of bits to shift the result by
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_scale_q7(
- q7_t * pSrc,
- q7_t scaleFract,
- int8_t shift,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Multiplies a Q15 vector by a scalar.
- * @param[in] *pSrc points to the input vector
- * @param[in] scaleFract fractional portion of the scale value
- * @param[in] shift number of bits to shift the result by
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_scale_q15(
- q15_t * pSrc,
- q15_t scaleFract,
- int8_t shift,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Multiplies a Q31 vector by a scalar.
- * @param[in] *pSrc points to the input vector
- * @param[in] scaleFract fractional portion of the scale value
- * @param[in] shift number of bits to shift the result by
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_scale_q31(
- q31_t * pSrc,
- q31_t scaleFract,
- int8_t shift,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q7 vector absolute value.
- * @param[in] *pSrc points to the input buffer
- * @param[out] *pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_abs_q7(
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Floating-point vector absolute value.
- * @param[in] *pSrc points to the input buffer
- * @param[out] *pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_abs_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q15 vector absolute value.
- * @param[in] *pSrc points to the input buffer
- * @param[out] *pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_abs_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Q31 vector absolute value.
- * @param[in] *pSrc points to the input buffer
- * @param[out] *pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- * @return none.
- */
-
- void arm_abs_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Dot product of floating-point vectors.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] *result output result returned here
- * @return none.
- */
-
- void arm_dot_prod_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- uint32_t blockSize,
- float32_t * result);
-
- /**
- * @brief Dot product of Q7 vectors.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] *result output result returned here
- * @return none.
- */
-
- void arm_dot_prod_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- uint32_t blockSize,
- q31_t * result);
-
- /**
- * @brief Dot product of Q15 vectors.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] *result output result returned here
- * @return none.
- */
-
- void arm_dot_prod_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- uint32_t blockSize,
- q63_t * result);
-
- /**
- * @brief Dot product of Q31 vectors.
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] *result output result returned here
- * @return none.
- */
-
- void arm_dot_prod_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- uint32_t blockSize,
- q63_t * result);
-
- /**
- * @brief Shifts the elements of a Q7 vector a specified number of bits.
- * @param[in] *pSrc points to the input vector
- * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_shift_q7(
- q7_t * pSrc,
- int8_t shiftBits,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Shifts the elements of a Q15 vector a specified number of bits.
- * @param[in] *pSrc points to the input vector
- * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_shift_q15(
- q15_t * pSrc,
- int8_t shiftBits,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Shifts the elements of a Q31 vector a specified number of bits.
- * @param[in] *pSrc points to the input vector
- * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_shift_q31(
- q31_t * pSrc,
- int8_t shiftBits,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Adds a constant offset to a floating-point vector.
- * @param[in] *pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_offset_f32(
- float32_t * pSrc,
- float32_t offset,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Adds a constant offset to a Q7 vector.
- * @param[in] *pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_offset_q7(
- q7_t * pSrc,
- q7_t offset,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Adds a constant offset to a Q15 vector.
- * @param[in] *pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_offset_q15(
- q15_t * pSrc,
- q15_t offset,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Adds a constant offset to a Q31 vector.
- * @param[in] *pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_offset_q31(
- q31_t * pSrc,
- q31_t offset,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Negates the elements of a floating-point vector.
- * @param[in] *pSrc points to the input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_negate_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Negates the elements of a Q7 vector.
- * @param[in] *pSrc points to the input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_negate_q7(
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Negates the elements of a Q15 vector.
- * @param[in] *pSrc points to the input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_negate_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Negates the elements of a Q31 vector.
- * @param[in] *pSrc points to the input vector
- * @param[out] *pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- * @return none.
- */
-
- void arm_negate_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
- /**
- * @brief Copies the elements of a floating-point vector.
- * @param[in] *pSrc input pointer
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_copy_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Copies the elements of a Q7 vector.
- * @param[in] *pSrc input pointer
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_copy_q7(
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Copies the elements of a Q15 vector.
- * @param[in] *pSrc input pointer
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_copy_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Copies the elements of a Q31 vector.
- * @param[in] *pSrc input pointer
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_copy_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
- /**
- * @brief Fills a constant value into a floating-point vector.
- * @param[in] value input value to be filled
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_fill_f32(
- float32_t value,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Fills a constant value into a Q7 vector.
- * @param[in] value input value to be filled
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_fill_q7(
- q7_t value,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Fills a constant value into a Q15 vector.
- * @param[in] value input value to be filled
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_fill_q15(
- q15_t value,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Fills a constant value into a Q31 vector.
- * @param[in] value input value to be filled
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_fill_q31(
- q31_t value,
- q31_t * pDst,
- uint32_t blockSize);
-
-/**
- * @brief Convolution of floating-point sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
- * @return none.
- */
-
- void arm_conv_f32(
- float32_t * pSrcA,
- uint32_t srcALen,
- float32_t * pSrcB,
- uint32_t srcBLen,
- float32_t * pDst);
-
-
- /**
- * @brief Convolution of Q15 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
- * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- * @return none.
- */
-
-
- void arm_conv_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
-/**
- * @brief Convolution of Q15 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
- * @return none.
- */
-
- void arm_conv_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
- /**
- * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
- * @return none.
- */
-
- void arm_conv_fast_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
- /**
- * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
- * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- * @return none.
- */
-
- void arm_conv_fast_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
-
- /**
- * @brief Convolution of Q31 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
- * @return none.
- */
-
- void arm_conv_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
- /**
- * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
- * @return none.
- */
-
- void arm_conv_fast_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
-
- /**
- * @brief Convolution of Q7 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
- * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- * @return none.
- */
-
- void arm_conv_opt_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
-
- /**
- * @brief Convolution of Q7 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
- * @return none.
- */
-
- void arm_conv_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst);
-
-
- /**
- * @brief Partial convolution of floating-point sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_f32(
- float32_t * pSrcA,
- uint32_t srcALen,
- float32_t * pSrcB,
- uint32_t srcBLen,
- float32_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
- /**
- * @brief Partial convolution of Q15 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
-/**
- * @brief Partial convolution of Q15 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
- /**
- * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_fast_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @param[in] * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_fast_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
- /**
- * @brief Partial convolution of Q31 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_fast_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q7 sequences
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_opt_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
-/**
- * @brief Partial convolution of Q7 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
-
- arm_status arm_conv_partial_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
-
- /**
- * @brief Instance structure for the Q15 FIR decimator.
- */
-
- typedef struct
- {
- uint8_t M; /**< decimation factor. */
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- } arm_fir_decimate_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR decimator.
- */
-
- typedef struct
- {
- uint8_t M; /**< decimation factor. */
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-
- } arm_fir_decimate_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR decimator.
- */
-
- typedef struct
- {
- uint8_t M; /**< decimation factor. */
- uint16_t numTaps; /**< number of coefficients in the filter. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
-
- } arm_fir_decimate_instance_f32;
-
-
-
- /**
- * @brief Processing function for the floating-point FIR decimator.
- * @param[in] *S points to an instance of the floating-point FIR decimator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- * @return none
- */
-
- void arm_fir_decimate_f32(
- const arm_fir_decimate_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point FIR decimator.
- * @param[in,out] *S points to an instance of the floating-point FIR decimator structure.
- * @param[in] numTaps number of coefficients in the filter.
- * @param[in] M decimation factor.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * blockSize is not a multiple of M.
- */
-
- arm_status arm_fir_decimate_init_f32(
- arm_fir_decimate_instance_f32 * S,
- uint16_t numTaps,
- uint8_t M,
- float32_t * pCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q15 FIR decimator.
- * @param[in] *S points to an instance of the Q15 FIR decimator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- * @return none
- */
-
- void arm_fir_decimate_q15(
- const arm_fir_decimate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
- * @param[in] *S points to an instance of the Q15 FIR decimator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- * @return none
- */
-
- void arm_fir_decimate_fast_q15(
- const arm_fir_decimate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
-
- /**
- * @brief Initialization function for the Q15 FIR decimator.
- * @param[in,out] *S points to an instance of the Q15 FIR decimator structure.
- * @param[in] numTaps number of coefficients in the filter.
- * @param[in] M decimation factor.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * blockSize is not a multiple of M.
- */
-
- arm_status arm_fir_decimate_init_q15(
- arm_fir_decimate_instance_q15 * S,
- uint16_t numTaps,
- uint8_t M,
- q15_t * pCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q31 FIR decimator.
- * @param[in] *S points to an instance of the Q31 FIR decimator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- * @return none
- */
-
- void arm_fir_decimate_q31(
- const arm_fir_decimate_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
- * @param[in] *S points to an instance of the Q31 FIR decimator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- * @return none
- */
-
- void arm_fir_decimate_fast_q31(
- arm_fir_decimate_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 FIR decimator.
- * @param[in,out] *S points to an instance of the Q31 FIR decimator structure.
- * @param[in] numTaps number of coefficients in the filter.
- * @param[in] M decimation factor.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * blockSize is not a multiple of M.
- */
-
- arm_status arm_fir_decimate_init_q31(
- arm_fir_decimate_instance_q31 * S,
- uint16_t numTaps,
- uint8_t M,
- q31_t * pCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
-
-
- /**
- * @brief Instance structure for the Q15 FIR interpolator.
- */
-
- typedef struct
- {
- uint8_t L; /**< upsample factor. */
- uint16_t phaseLength; /**< length of each polyphase filter component. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
- q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
- } arm_fir_interpolate_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR interpolator.
- */
-
- typedef struct
- {
- uint8_t L; /**< upsample factor. */
- uint16_t phaseLength; /**< length of each polyphase filter component. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
- q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
- } arm_fir_interpolate_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR interpolator.
- */
-
- typedef struct
- {
- uint8_t L; /**< upsample factor. */
- uint16_t phaseLength; /**< length of each polyphase filter component. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
- float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
- } arm_fir_interpolate_instance_f32;
-
-
- /**
- * @brief Processing function for the Q15 FIR interpolator.
- * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- */
-
- void arm_fir_interpolate_q15(
- const arm_fir_interpolate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q15 FIR interpolator.
- * @param[in,out] *S points to an instance of the Q15 FIR interpolator structure.
- * @param[in] L upsample factor.
- * @param[in] numTaps number of filter coefficients in the filter.
- * @param[in] *pCoeffs points to the filter coefficient buffer.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length numTaps is not a multiple of the interpolation factor L.
- */
-
- arm_status arm_fir_interpolate_init_q15(
- arm_fir_interpolate_instance_q15 * S,
- uint8_t L,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q31 FIR interpolator.
- * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- */
-
- void arm_fir_interpolate_q31(
- const arm_fir_interpolate_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q31 FIR interpolator.
- * @param[in,out] *S points to an instance of the Q31 FIR interpolator structure.
- * @param[in] L upsample factor.
- * @param[in] numTaps number of filter coefficients in the filter.
- * @param[in] *pCoeffs points to the filter coefficient buffer.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length numTaps is not a multiple of the interpolation factor L.
- */
-
- arm_status arm_fir_interpolate_init_q31(
- arm_fir_interpolate_instance_q31 * S,
- uint8_t L,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the floating-point FIR interpolator.
- * @param[in] *S points to an instance of the floating-point FIR interpolator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- */
-
- void arm_fir_interpolate_f32(
- const arm_fir_interpolate_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the floating-point FIR interpolator.
- * @param[in,out] *S points to an instance of the floating-point FIR interpolator structure.
- * @param[in] L upsample factor.
- * @param[in] numTaps number of filter coefficients in the filter.
- * @param[in] *pCoeffs points to the filter coefficient buffer.
- * @param[in] *pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length numTaps is not a multiple of the interpolation factor L.
- */
-
- arm_status arm_fir_interpolate_init_f32(
- arm_fir_interpolate_instance_f32 * S,
- uint8_t L,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
- /**
- * @brief Instance structure for the high precision Q31 Biquad cascade filter.
- */
-
- typedef struct
- {
- uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
- q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
- uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
-
- } arm_biquad_cas_df1_32x64_ins_q31;
-
-
- /**
- * @param[in] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_biquad_cas_df1_32x64_q31(
- const arm_biquad_cas_df1_32x64_ins_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @param[in,out] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
- * @return none
- */
-
- void arm_biquad_cas_df1_32x64_init_q31(
- arm_biquad_cas_df1_32x64_ins_q31 * S,
- uint8_t numStages,
- q31_t * pCoeffs,
- q63_t * pState,
- uint8_t postShift);
-
-
-
- /**
- * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
- */
-
- typedef struct
- {
- uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
- float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
- } arm_biquad_cascade_df2T_instance_f32;
-
-
- /**
- * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in] *S points to an instance of the filter data structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_biquad_cascade_df2T_f32(
- const arm_biquad_cascade_df2T_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in,out] *S points to an instance of the filter data structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] *pCoeffs points to the filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @return none
- */
-
- void arm_biquad_cascade_df2T_init_f32(
- arm_biquad_cascade_df2T_instance_f32 * S,
- uint8_t numStages,
- float32_t * pCoeffs,
- float32_t * pState);
-
-
-
- /**
- * @brief Instance structure for the Q15 FIR lattice filter.
- */
-
- typedef struct
- {
- uint16_t numStages; /**< number of filter stages. */
- q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
- } arm_fir_lattice_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR lattice filter.
- */
-
- typedef struct
- {
- uint16_t numStages; /**< number of filter stages. */
- q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
- } arm_fir_lattice_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR lattice filter.
- */
-
- typedef struct
- {
- uint16_t numStages; /**< number of filter stages. */
- float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
- } arm_fir_lattice_instance_f32;
-
- /**
- * @brief Initialization function for the Q15 FIR lattice filter.
- * @param[in] *S points to an instance of the Q15 FIR lattice structure.
- * @param[in] numStages number of filter stages.
- * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
- * @param[in] *pState points to the state buffer. The array is of length numStages.
- * @return none.
- */
-
- void arm_fir_lattice_init_q15(
- arm_fir_lattice_instance_q15 * S,
- uint16_t numStages,
- q15_t * pCoeffs,
- q15_t * pState);
-
-
- /**
- * @brief Processing function for the Q15 FIR lattice filter.
- * @param[in] *S points to an instance of the Q15 FIR lattice structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
- void arm_fir_lattice_q15(
- const arm_fir_lattice_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q31 FIR lattice filter.
- * @param[in] *S points to an instance of the Q31 FIR lattice structure.
- * @param[in] numStages number of filter stages.
- * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
- * @param[in] *pState points to the state buffer. The array is of length numStages.
- * @return none.
- */
-
- void arm_fir_lattice_init_q31(
- arm_fir_lattice_instance_q31 * S,
- uint16_t numStages,
- q31_t * pCoeffs,
- q31_t * pState);
-
-
- /**
- * @brief Processing function for the Q31 FIR lattice filter.
- * @param[in] *S points to an instance of the Q31 FIR lattice structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_fir_lattice_q31(
- const arm_fir_lattice_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-/**
- * @brief Initialization function for the floating-point FIR lattice filter.
- * @param[in] *S points to an instance of the floating-point FIR lattice structure.
- * @param[in] numStages number of filter stages.
- * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
- * @param[in] *pState points to the state buffer. The array is of length numStages.
- * @return none.
- */
-
- void arm_fir_lattice_init_f32(
- arm_fir_lattice_instance_f32 * S,
- uint16_t numStages,
- float32_t * pCoeffs,
- float32_t * pState);
-
- /**
- * @brief Processing function for the floating-point FIR lattice filter.
- * @param[in] *S points to an instance of the floating-point FIR lattice structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_fir_lattice_f32(
- const arm_fir_lattice_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Instance structure for the Q15 IIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of stages in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
- q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
- q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
- } arm_iir_lattice_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 IIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of stages in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
- q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
- q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
- } arm_iir_lattice_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point IIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of stages in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
- float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
- float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
- } arm_iir_lattice_instance_f32;
-
- /**
- * @brief Processing function for the floating-point IIR lattice filter.
- * @param[in] *S points to an instance of the floating-point IIR lattice structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_iir_lattice_f32(
- const arm_iir_lattice_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the floating-point IIR lattice filter.
- * @param[in] *S points to an instance of the floating-point IIR lattice structure.
- * @param[in] numStages number of stages in the filter.
- * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
- * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
- * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize-1.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_iir_lattice_init_f32(
- arm_iir_lattice_instance_f32 * S,
- uint16_t numStages,
- float32_t * pkCoeffs,
- float32_t * pvCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 IIR lattice filter.
- * @param[in] *S points to an instance of the Q31 IIR lattice structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_iir_lattice_q31(
- const arm_iir_lattice_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 IIR lattice filter.
- * @param[in] *S points to an instance of the Q31 IIR lattice structure.
- * @param[in] numStages number of stages in the filter.
- * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
- * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
- * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_iir_lattice_init_q31(
- arm_iir_lattice_instance_q31 * S,
- uint16_t numStages,
- q31_t * pkCoeffs,
- q31_t * pvCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q15 IIR lattice filter.
- * @param[in] *S points to an instance of the Q15 IIR lattice structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_iir_lattice_q15(
- const arm_iir_lattice_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
-/**
- * @brief Initialization function for the Q15 IIR lattice filter.
- * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure.
- * @param[in] numStages number of stages in the filter.
- * @param[in] *pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
- * @param[in] *pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
- * @param[in] *pState points to state buffer. The array is of length numStages+blockSize.
- * @param[in] blockSize number of samples to process per call.
- * @return none.
- */
-
- void arm_iir_lattice_init_q15(
- arm_iir_lattice_instance_q15 * S,
- uint16_t numStages,
- q15_t * pkCoeffs,
- q15_t * pvCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
- /**
- * @brief Instance structure for the floating-point LMS filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- float32_t mu; /**< step size that controls filter coefficient updates. */
- } arm_lms_instance_f32;
-
- /**
- * @brief Processing function for floating-point LMS filter.
- * @param[in] *S points to an instance of the floating-point LMS filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[in] *pRef points to the block of reference data.
- * @param[out] *pOut points to the block of output data.
- * @param[out] *pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_f32(
- const arm_lms_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pRef,
- float32_t * pOut,
- float32_t * pErr,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for floating-point LMS filter.
- * @param[in] *S points to an instance of the floating-point LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] *pCoeffs points to the coefficient buffer.
- * @param[in] *pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_init_f32(
- arm_lms_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- float32_t mu,
- uint32_t blockSize);
-
- /**
- * @brief Instance structure for the Q15 LMS filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q15_t mu; /**< step size that controls filter coefficient updates. */
- uint32_t postShift; /**< bit shift applied to coefficients. */
- } arm_lms_instance_q15;
-
-
- /**
- * @brief Initialization function for the Q15 LMS filter.
- * @param[in] *S points to an instance of the Q15 LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] *pCoeffs points to the coefficient buffer.
- * @param[in] *pState points to the state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- * @return none.
- */
-
- void arm_lms_init_q15(
- arm_lms_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- q15_t mu,
- uint32_t blockSize,
- uint32_t postShift);
-
- /**
- * @brief Processing function for Q15 LMS filter.
- * @param[in] *S points to an instance of the Q15 LMS filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[in] *pRef points to the block of reference data.
- * @param[out] *pOut points to the block of output data.
- * @param[out] *pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_q15(
- const arm_lms_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pRef,
- q15_t * pOut,
- q15_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q31 LMS filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q31_t mu; /**< step size that controls filter coefficient updates. */
- uint32_t postShift; /**< bit shift applied to coefficients. */
-
- } arm_lms_instance_q31;
-
- /**
- * @brief Processing function for Q31 LMS filter.
- * @param[in] *S points to an instance of the Q15 LMS filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[in] *pRef points to the block of reference data.
- * @param[out] *pOut points to the block of output data.
- * @param[out] *pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_q31(
- const arm_lms_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pRef,
- q31_t * pOut,
- q31_t * pErr,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for Q31 LMS filter.
- * @param[in] *S points to an instance of the Q31 LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] *pCoeffs points to coefficient buffer.
- * @param[in] *pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- * @return none.
- */
-
- void arm_lms_init_q31(
- arm_lms_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- q31_t mu,
- uint32_t blockSize,
- uint32_t postShift);
-
- /**
- * @brief Instance structure for the floating-point normalized LMS filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- float32_t mu; /**< step size that control filter coefficient updates. */
- float32_t energy; /**< saves previous frame energy. */
- float32_t x0; /**< saves previous input sample. */
- } arm_lms_norm_instance_f32;
-
- /**
- * @brief Processing function for floating-point normalized LMS filter.
- * @param[in] *S points to an instance of the floating-point normalized LMS filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[in] *pRef points to the block of reference data.
- * @param[out] *pOut points to the block of output data.
- * @param[out] *pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_norm_f32(
- arm_lms_norm_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pRef,
- float32_t * pOut,
- float32_t * pErr,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for floating-point normalized LMS filter.
- * @param[in] *S points to an instance of the floating-point LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] *pCoeffs points to coefficient buffer.
- * @param[in] *pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_norm_init_f32(
- arm_lms_norm_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- float32_t mu,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q31 normalized LMS filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q31_t mu; /**< step size that controls filter coefficient updates. */
- uint8_t postShift; /**< bit shift applied to coefficients. */
- q31_t *recipTable; /**< points to the reciprocal initial value table. */
- q31_t energy; /**< saves previous frame energy. */
- q31_t x0; /**< saves previous input sample. */
- } arm_lms_norm_instance_q31;
-
- /**
- * @brief Processing function for Q31 normalized LMS filter.
- * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[in] *pRef points to the block of reference data.
- * @param[out] *pOut points to the block of output data.
- * @param[out] *pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_norm_q31(
- arm_lms_norm_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pRef,
- q31_t * pOut,
- q31_t * pErr,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for Q31 normalized LMS filter.
- * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] *pCoeffs points to coefficient buffer.
- * @param[in] *pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- * @return none.
- */
-
- void arm_lms_norm_init_q31(
- arm_lms_norm_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- q31_t mu,
- uint32_t blockSize,
- uint8_t postShift);
-
- /**
- * @brief Instance structure for the Q15 normalized LMS filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< Number of coefficients in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q15_t mu; /**< step size that controls filter coefficient updates. */
- uint8_t postShift; /**< bit shift applied to coefficients. */
- q15_t *recipTable; /**< Points to the reciprocal initial value table. */
- q15_t energy; /**< saves previous frame energy. */
- q15_t x0; /**< saves previous input sample. */
- } arm_lms_norm_instance_q15;
-
- /**
- * @brief Processing function for Q15 normalized LMS filter.
- * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[in] *pRef points to the block of reference data.
- * @param[out] *pOut points to the block of output data.
- * @param[out] *pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- * @return none.
- */
-
- void arm_lms_norm_q15(
- arm_lms_norm_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pRef,
- q15_t * pOut,
- q15_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for Q15 normalized LMS filter.
- * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] *pCoeffs points to coefficient buffer.
- * @param[in] *pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- * @return none.
- */
-
- void arm_lms_norm_init_q15(
- arm_lms_norm_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- q15_t mu,
- uint32_t blockSize,
- uint8_t postShift);
-
- /**
- * @brief Correlation of floating-point sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @return none.
- */
-
- void arm_correlate_f32(
- float32_t * pSrcA,
- uint32_t srcALen,
- float32_t * pSrcB,
- uint32_t srcBLen,
- float32_t * pDst);
-
-
- /**
- * @brief Correlation of Q15 sequences
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @return none.
- */
- void arm_correlate_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch);
-
-
- /**
- * @brief Correlation of Q15 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @return none.
- */
-
- void arm_correlate_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
- /**
- * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @return none.
- */
-
- void arm_correlate_fast_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
-
-
- /**
- * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in] *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @return none.
- */
-
- void arm_correlate_fast_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch);
-
- /**
- * @brief Correlation of Q31 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @return none.
- */
-
- void arm_correlate_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
- /**
- * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @return none.
- */
-
- void arm_correlate_fast_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
-
-
- /**
- * @brief Correlation of Q7 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- * @return none.
- */
-
- void arm_correlate_opt_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
- /**
- * @brief Correlation of Q7 sequences.
- * @param[in] *pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] *pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @return none.
- */
-
- void arm_correlate_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst);
-
-
- /**
- * @brief Instance structure for the floating-point sparse FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_f32;
-
- /**
- * @brief Instance structure for the Q31 sparse FIR filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_q31;
-
- /**
- * @brief Instance structure for the Q15 sparse FIR filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_q15;
-
- /**
- * @brief Instance structure for the Q7 sparse FIR filter.
- */
-
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_q7;
-
- /**
- * @brief Processing function for the floating-point sparse FIR filter.
- * @param[in] *S points to an instance of the floating-point sparse FIR structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- */
-
- void arm_fir_sparse_f32(
- arm_fir_sparse_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- float32_t * pScratchIn,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the floating-point sparse FIR filter.
- * @param[in,out] *S points to an instance of the floating-point sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] *pCoeffs points to the array of filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] *pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- * @return none
- */
-
- void arm_fir_sparse_init_f32(
- arm_fir_sparse_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q31 sparse FIR filter.
- * @param[in] *S points to an instance of the Q31 sparse FIR structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- */
-
- void arm_fir_sparse_q31(
- arm_fir_sparse_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- q31_t * pScratchIn,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q31 sparse FIR filter.
- * @param[in,out] *S points to an instance of the Q31 sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] *pCoeffs points to the array of filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] *pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- * @return none
- */
-
- void arm_fir_sparse_init_q31(
- arm_fir_sparse_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q15 sparse FIR filter.
- * @param[in] *S points to an instance of the Q15 sparse FIR structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- */
-
- void arm_fir_sparse_q15(
- arm_fir_sparse_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- q15_t * pScratchIn,
- q31_t * pScratchOut,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q15 sparse FIR filter.
- * @param[in,out] *S points to an instance of the Q15 sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] *pCoeffs points to the array of filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] *pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- * @return none
- */
-
- void arm_fir_sparse_init_q15(
- arm_fir_sparse_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q7 sparse FIR filter.
- * @param[in] *S points to an instance of the Q7 sparse FIR structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data
- * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- */
-
- void arm_fir_sparse_q7(
- arm_fir_sparse_instance_q7 * S,
- q7_t * pSrc,
- q7_t * pDst,
- q7_t * pScratchIn,
- q31_t * pScratchOut,
- uint32_t blockSize);
-
- /**
- * @brief Initialization function for the Q7 sparse FIR filter.
- * @param[in,out] *S points to an instance of the Q7 sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] *pCoeffs points to the array of filter coefficients.
- * @param[in] *pState points to the state buffer.
- * @param[in] *pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- * @return none
- */
-
- void arm_fir_sparse_init_q7(
- arm_fir_sparse_instance_q7 * S,
- uint16_t numTaps,
- q7_t * pCoeffs,
- q7_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
-
- /*
- * @brief Floating-point sin_cos function.
- * @param[in] theta input value in degrees
- * @param[out] *pSinVal points to the processed sine output.
- * @param[out] *pCosVal points to the processed cos output.
- * @return none.
- */
-
- void arm_sin_cos_f32(
- float32_t theta,
- float32_t * pSinVal,
- float32_t * pCcosVal);
-
- /*
- * @brief Q31 sin_cos function.
- * @param[in] theta scaled input value in degrees
- * @param[out] *pSinVal points to the processed sine output.
- * @param[out] *pCosVal points to the processed cosine output.
- * @return none.
- */
-
- void arm_sin_cos_q31(
- q31_t theta,
- q31_t * pSinVal,
- q31_t * pCosVal);
-
-
- /**
- * @brief Floating-point complex conjugate.
- * @param[in] *pSrc points to the input vector
- * @param[out] *pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- * @return none.
- */
-
- void arm_cmplx_conj_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q31 complex conjugate.
- * @param[in] *pSrc points to the input vector
- * @param[out] *pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- * @return none.
- */
-
- void arm_cmplx_conj_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q15 complex conjugate.
- * @param[in] *pSrc points to the input vector
- * @param[out] *pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- * @return none.
- */
-
- void arm_cmplx_conj_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t numSamples);
-
-
-
- /**
- * @brief Floating-point complex magnitude squared
- * @param[in] *pSrc points to the complex input vector
- * @param[out] *pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- * @return none.
- */
-
- void arm_cmplx_mag_squared_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q31 complex magnitude squared
- * @param[in] *pSrc points to the complex input vector
- * @param[out] *pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- * @return none.
- */
-
- void arm_cmplx_mag_squared_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q15 complex magnitude squared
- * @param[in] *pSrc points to the complex input vector
- * @param[out] *pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- * @return none.
- */
-
- void arm_cmplx_mag_squared_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup PID PID Motor Control
- *
- * A Proportional Integral Derivative (PID) controller is a generic feedback control
- * loop mechanism widely used in industrial control systems.
- * A PID controller is the most commonly used type of feedback controller.
- *
- * This set of functions implements (PID) controllers
- * for Q15, Q31, and floating-point data types. The functions operate on a single sample
- * of data and each call to the function returns a single processed value.
- * S points to an instance of the PID control data structure. in
- * is the input sample value. The functions return the output value.
- *
- * \par Algorithm:
- *
- * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
- * A0 = Kp + Ki + Kd
- * A1 = (-Kp ) - (2 * Kd )
- * A2 = Kd
- *
- * \par
- * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
- *
- * \par
- * \image html PID.gif "Proportional Integral Derivative Controller"
- *
- * \par
- * The PID controller calculates an "error" value as the difference between
- * the measured output and the reference input.
- * The controller attempts to minimize the error by adjusting the process control inputs.
- * The proportional value determines the reaction to the current error,
- * the integral value determines the reaction based on the sum of recent errors,
- * and the derivative value determines the reaction based on the rate at which the error has been changing.
- *
- * \par Instance Structure
- * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
- * A separate instance structure must be defined for each PID Controller.
- * There are separate instance structure declarations for each of the 3 supported data types.
- *
- * \par Reset Functions
- * There is also an associated reset function for each data type which clears the state array.
- *
- * \par Initialization Functions
- * There is also an associated initialization function for each data type.
- * The initialization function performs the following operations:
- * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
- * - Zeros out the values in the state buffer.
- *
- * \par
- * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
- *
- * \par Fixed-Point Behavior
- * Care must be taken when using the fixed-point versions of the PID Controller functions.
- * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup PID
- * @{
- */
-
- /**
- * @brief Process function for the floating-point PID Control.
- * @param[in,out] *S is an instance of the floating-point PID Control structure
- * @param[in] in input sample to process
- * @return out processed output sample.
- */
-
-
- static __INLINE float32_t arm_pid_f32(
- arm_pid_instance_f32 * S,
- float32_t in)
- {
- float32_t out;
-
- /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
- out = (S->A0 * in) +
- (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
-
- /* Update state */
- S->state[1] = S->state[0];
- S->state[0] = in;
- S->state[2] = out;
-
- /* return to application */
- return (out);
-
- }
-
- /**
- * @brief Process function for the Q31 PID Control.
- * @param[in,out] *S points to an instance of the Q31 PID Control structure
- * @param[in] in input sample to process
- * @return out processed output sample.
- *
- * Scaling and Overflow Behavior:
- * \par
- * The function is implemented using an internal 64-bit accumulator.
- * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
- * Thus, if the accumulator result overflows it wraps around rather than clip.
- * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
- * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
- */
-
- static __INLINE q31_t arm_pid_q31(
- arm_pid_instance_q31 * S,
- q31_t in)
- {
- q63_t acc;
- q31_t out;
-
- /* acc = A0 * x[n] */
- acc = (q63_t) S->A0 * in;
-
- /* acc += A1 * x[n-1] */
- acc += (q63_t) S->A1 * S->state[0];
-
- /* acc += A2 * x[n-2] */
- acc += (q63_t) S->A2 * S->state[1];
-
- /* convert output to 1.31 format to add y[n-1] */
- out = (q31_t) (acc >> 31u);
-
- /* out += y[n-1] */
- out += S->state[2];
-
- /* Update state */
- S->state[1] = S->state[0];
- S->state[0] = in;
- S->state[2] = out;
-
- /* return to application */
- return (out);
-
- }
-
- /**
- * @brief Process function for the Q15 PID Control.
- * @param[in,out] *S points to an instance of the Q15 PID Control structure
- * @param[in] in input sample to process
- * @return out processed output sample.
- *
- * Scaling and Overflow Behavior:
- * \par
- * The function is implemented using a 64-bit internal accumulator.
- * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
- * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
- * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
- * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
- * Lastly, the accumulator is saturated to yield a result in 1.15 format.
- */
-
- static __INLINE q15_t arm_pid_q15(
- arm_pid_instance_q15 * S,
- q15_t in)
- {
- q63_t acc;
- q15_t out;
-
-#ifndef ARM_MATH_CM0_FAMILY
- __SIMD32_TYPE *vstate;
-
- /* Implementation of PID controller */
-
- /* acc = A0 * x[n] */
- acc = (q31_t) __SMUAD(S->A0, in);
-
- /* acc += A1 * x[n-1] + A2 * x[n-2] */
- vstate = __SIMD32_CONST(S->state);
- acc = __SMLALD(S->A1, (q31_t) *vstate, acc);
-
-#else
- /* acc = A0 * x[n] */
- acc = ((q31_t) S->A0) * in;
-
- /* acc += A1 * x[n-1] + A2 * x[n-2] */
- acc += (q31_t) S->A1 * S->state[0];
- acc += (q31_t) S->A2 * S->state[1];
-
-#endif
-
- /* acc += y[n-1] */
- acc += (q31_t) S->state[2] << 15;
-
- /* saturate the output */
- out = (q15_t) (__SSAT((acc >> 15), 16));
-
- /* Update state */
- S->state[1] = S->state[0];
- S->state[0] = in;
- S->state[2] = out;
-
- /* return to application */
- return (out);
-
- }
-
- /**
- * @} end of PID group
- */
-
-
- /**
- * @brief Floating-point matrix inverse.
- * @param[in] *src points to the instance of the input floating-point matrix structure.
- * @param[out] *dst points to the instance of the output floating-point matrix structure.
- * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
- * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
- */
-
- arm_status arm_mat_inverse_f32(
- const arm_matrix_instance_f32 * src,
- arm_matrix_instance_f32 * dst);
-
-
-
- /**
- * @ingroup groupController
- */
-
-
- /**
- * @defgroup clarke Vector Clarke Transform
- * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
- * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic to calculate currents
- * in the two-phase orthogonal stator axis Ialpha and Ibeta.
- * When Ialpha is superposed with Ia as shown in the figure below
- * \image html clarke.gif Stator current space vector and its components in (a,b).
- * and Ia + Ib + Ic = 0, in this condition Ialpha and Ibeta
- * can be calculated using only Ia and Ib.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html clarkeFormula.gif
- * where Ia and Ib are the instantaneous stator phases and
- * pIalpha and pIbeta are the two coordinates of time invariant vector.
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Clarke transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup clarke
- * @{
- */
-
- /**
- *
- * @brief Floating-point Clarke transform
- * @param[in] Ia input three-phase coordinate a
- * @param[in] Ib input three-phase coordinate b
- * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
- * @return none.
- */
-
- static __INLINE void arm_clarke_f32(
- float32_t Ia,
- float32_t Ib,
- float32_t * pIalpha,
- float32_t * pIbeta)
- {
- /* Calculate pIalpha using the equation, pIalpha = Ia */
- *pIalpha = Ia;
-
- /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
- *pIbeta =
- ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
-
- }
-
- /**
- * @brief Clarke transform for Q31 version
- * @param[in] Ia input three-phase coordinate a
- * @param[in] Ib input three-phase coordinate b
- * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
- * @return none.
- *
- * Scaling and Overflow Behavior:
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition, hence there is no risk of overflow.
- */
-
- static __INLINE void arm_clarke_q31(
- q31_t Ia,
- q31_t Ib,
- q31_t * pIalpha,
- q31_t * pIbeta)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
-
- /* Calculating pIalpha from Ia by equation pIalpha = Ia */
- *pIalpha = Ia;
-
- /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
- product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
-
- /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
- product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
-
- /* pIbeta is calculated by adding the intermediate products */
- *pIbeta = __QADD(product1, product2);
- }
-
- /**
- * @} end of clarke group
- */
-
- /**
- * @brief Converts the elements of the Q7 vector to Q31 vector.
- * @param[in] *pSrc input pointer
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_q7_to_q31(
- q7_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup inv_clarke Vector Inverse Clarke Transform
- * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html clarkeInvFormula.gif
- * where pIa and pIb are the instantaneous stator phases and
- * Ialpha and Ibeta are the two coordinates of time invariant vector.
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Clarke transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup inv_clarke
- * @{
- */
-
- /**
- * @brief Floating-point Inverse Clarke transform
- * @param[in] Ialpha input two-phase orthogonal vector axis alpha
- * @param[in] Ibeta input two-phase orthogonal vector axis beta
- * @param[out] *pIa points to output three-phase coordinate a
- * @param[out] *pIb points to output three-phase coordinate b
- * @return none.
- */
-
-
- static __INLINE void arm_inv_clarke_f32(
- float32_t Ialpha,
- float32_t Ibeta,
- float32_t * pIa,
- float32_t * pIb)
- {
- /* Calculating pIa from Ialpha by equation pIa = Ialpha */
- *pIa = Ialpha;
-
- /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
- *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta;
-
- }
-
- /**
- * @brief Inverse Clarke transform for Q31 version
- * @param[in] Ialpha input two-phase orthogonal vector axis alpha
- * @param[in] Ibeta input two-phase orthogonal vector axis beta
- * @param[out] *pIa points to output three-phase coordinate a
- * @param[out] *pIb points to output three-phase coordinate b
- * @return none.
- *
- * Scaling and Overflow Behavior:
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the subtraction, hence there is no risk of overflow.
- */
-
- static __INLINE void arm_inv_clarke_q31(
- q31_t Ialpha,
- q31_t Ibeta,
- q31_t * pIa,
- q31_t * pIb)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
-
- /* Calculating pIa from Ialpha by equation pIa = Ialpha */
- *pIa = Ialpha;
-
- /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
- product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
-
- /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
- product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
-
- /* pIb is calculated by subtracting the products */
- *pIb = __QSUB(product2, product1);
-
- }
-
- /**
- * @} end of inv_clarke group
- */
-
- /**
- * @brief Converts the elements of the Q7 vector to Q15 vector.
- * @param[in] *pSrc input pointer
- * @param[out] *pDst output pointer
- * @param[in] blockSize number of samples to process
- * @return none.
- */
- void arm_q7_to_q15(
- q7_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup park Vector Park Transform
- *
- * Forward Park transform converts the input two-coordinate vector to flux and torque components.
- * The Park transform can be used to realize the transformation of the Ialpha and the Ibeta currents
- * from the stationary to the moving reference frame and control the spatial relationship between
- * the stator vector current and rotor flux vector.
- * If we consider the d axis aligned with the rotor flux, the diagram below shows the
- * current vector and the relationship from the two reference frames:
- * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html parkFormula.gif
- * where Ialpha and Ibeta are the stator vector components,
- * pId and pIq are rotor vector components and cosVal and sinVal are the
- * cosine and sine values of theta (rotor flux position).
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Park transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup park
- * @{
- */
-
- /**
- * @brief Floating-point Park transform
- * @param[in] Ialpha input two-phase vector coordinate alpha
- * @param[in] Ibeta input two-phase vector coordinate beta
- * @param[out] *pId points to output rotor reference frame d
- * @param[out] *pIq points to output rotor reference frame q
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- * @return none.
- *
- * The function implements the forward Park transform.
- *
- */
-
- static __INLINE void arm_park_f32(
- float32_t Ialpha,
- float32_t Ibeta,
- float32_t * pId,
- float32_t * pIq,
- float32_t sinVal,
- float32_t cosVal)
- {
- /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
- *pId = Ialpha * cosVal + Ibeta * sinVal;
-
- /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
- *pIq = -Ialpha * sinVal + Ibeta * cosVal;
-
- }
-
- /**
- * @brief Park transform for Q31 version
- * @param[in] Ialpha input two-phase vector coordinate alpha
- * @param[in] Ibeta input two-phase vector coordinate beta
- * @param[out] *pId points to output rotor reference frame d
- * @param[out] *pIq points to output rotor reference frame q
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- * @return none.
- *
- * Scaling and Overflow Behavior:
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition and subtraction, hence there is no risk of overflow.
- */
-
-
- static __INLINE void arm_park_q31(
- q31_t Ialpha,
- q31_t Ibeta,
- q31_t * pId,
- q31_t * pIq,
- q31_t sinVal,
- q31_t cosVal)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
- q31_t product3, product4; /* Temporary variables used to store intermediate results */
-
- /* Intermediate product is calculated by (Ialpha * cosVal) */
- product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
-
- /* Intermediate product is calculated by (Ibeta * sinVal) */
- product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
-
-
- /* Intermediate product is calculated by (Ialpha * sinVal) */
- product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
-
- /* Intermediate product is calculated by (Ibeta * cosVal) */
- product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
-
- /* Calculate pId by adding the two intermediate products 1 and 2 */
- *pId = __QADD(product1, product2);
-
- /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
- *pIq = __QSUB(product4, product3);
- }
-
- /**
- * @} end of park group
- */
-
- /**
- * @brief Converts the elements of the Q7 vector to floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[out] *pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- * @return none.
- */
- void arm_q7_to_float(
- q7_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup inv_park Vector Inverse Park transform
- * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html parkInvFormula.gif
- * where pIalpha and pIbeta are the stator vector components,
- * Id and Iq are rotor vector components and cosVal and sinVal are the
- * cosine and sine values of theta (rotor flux position).
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Park transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup inv_park
- * @{
- */
-
- /**
- * @brief Floating-point Inverse Park transform
- * @param[in] Id input coordinate of rotor reference frame d
- * @param[in] Iq input coordinate of rotor reference frame q
- * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- * @return none.
- */
-
- static __INLINE void arm_inv_park_f32(
- float32_t Id,
- float32_t Iq,
- float32_t * pIalpha,
- float32_t * pIbeta,
- float32_t sinVal,
- float32_t cosVal)
- {
- /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
- *pIalpha = Id * cosVal - Iq * sinVal;
-
- /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
- *pIbeta = Id * sinVal + Iq * cosVal;
-
- }
-
-
- /**
- * @brief Inverse Park transform for Q31 version
- * @param[in] Id input coordinate of rotor reference frame d
- * @param[in] Iq input coordinate of rotor reference frame q
- * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- * @return none.
- *
- * Scaling and Overflow Behavior:
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition, hence there is no risk of overflow.
- */
-
-
- static __INLINE void arm_inv_park_q31(
- q31_t Id,
- q31_t Iq,
- q31_t * pIalpha,
- q31_t * pIbeta,
- q31_t sinVal,
- q31_t cosVal)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
- q31_t product3, product4; /* Temporary variables used to store intermediate results */
-
- /* Intermediate product is calculated by (Id * cosVal) */
- product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
-
- /* Intermediate product is calculated by (Iq * sinVal) */
- product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
-
-
- /* Intermediate product is calculated by (Id * sinVal) */
- product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
-
- /* Intermediate product is calculated by (Iq * cosVal) */
- product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
-
- /* Calculate pIalpha by using the two intermediate products 1 and 2 */
- *pIalpha = __QSUB(product1, product2);
-
- /* Calculate pIbeta by using the two intermediate products 3 and 4 */
- *pIbeta = __QADD(product4, product3);
-
- }
-
- /**
- * @} end of Inverse park group
- */
-
-
- /**
- * @brief Converts the elements of the Q31 vector to floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[out] *pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- * @return none.
- */
- void arm_q31_to_float(
- q31_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @ingroup groupInterpolation
- */
-
- /**
- * @defgroup LinearInterpolate Linear Interpolation
- *
- * Linear interpolation is a method of curve fitting using linear polynomials.
- * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
- *
- * \par
- * \image html LinearInterp.gif "Linear interpolation"
- *
- * \par
- * A Linear Interpolate function calculates an output value(y), for the input(x)
- * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
- *
- * \par Algorithm:
- *
- * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
- * where x0, x1 are nearest values of input x
- * y0, y1 are nearest values to output y
- *
- *
- * \par
- * This set of functions implements Linear interpolation process
- * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
- * sample of data and each call to the function returns a single processed value.
- * S points to an instance of the Linear Interpolate function data structure.
- * x is the input sample value. The functions returns the output value.
- *
- * \par
- * if x is outside of the table boundary, Linear interpolation returns first value of the table
- * if x is below input range and returns last value of table if x is above range.
- */
-
- /**
- * @addtogroup LinearInterpolate
- * @{
- */
-
- /**
- * @brief Process function for the floating-point Linear Interpolation Function.
- * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure
- * @param[in] x input sample to process
- * @return y processed output sample.
- *
- */
-
- static __INLINE float32_t arm_linear_interp_f32(
- arm_linear_interp_instance_f32 * S,
- float32_t x)
- {
-
- float32_t y;
- float32_t x0, x1; /* Nearest input values */
- float32_t y0, y1; /* Nearest output values */
- float32_t xSpacing = S->xSpacing; /* spacing between input values */
- int32_t i; /* Index variable */
- float32_t *pYData = S->pYData; /* pointer to output table */
-
- /* Calculation of index */
- i = (int32_t) ((x - S->x1) / xSpacing);
-
- if(i < 0)
- {
- /* Iniatilize output for below specified range as least output value of table */
- y = pYData[0];
- }
- else if((uint32_t)i >= S->nValues)
- {
- /* Iniatilize output for above specified range as last output value of table */
- y = pYData[S->nValues - 1];
- }
- else
- {
- /* Calculation of nearest input values */
- x0 = S->x1 + i * xSpacing;
- x1 = S->x1 + (i + 1) * xSpacing;
-
- /* Read of nearest output values */
- y0 = pYData[i];
- y1 = pYData[i + 1];
-
- /* Calculation of output */
- y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
-
- }
-
- /* returns output value */
- return (y);
- }
-
- /**
- *
- * @brief Process function for the Q31 Linear Interpolation Function.
- * @param[in] *pYData pointer to Q31 Linear Interpolation table
- * @param[in] x input sample to process
- * @param[in] nValues number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- *
- */
-
-
- static __INLINE q31_t arm_linear_interp_q31(
- q31_t * pYData,
- q31_t x,
- uint32_t nValues)
- {
- q31_t y; /* output */
- q31_t y0, y1; /* Nearest output values */
- q31_t fract; /* fractional part */
- int32_t index; /* Index to read nearest output values */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- index = ((x & 0xFFF00000) >> 20);
-
- if(index >= (int32_t)(nValues - 1))
- {
- return (pYData[nValues - 1]);
- }
- else if(index < 0)
- {
- return (pYData[0]);
- }
- else
- {
-
- /* 20 bits for the fractional part */
- /* shift left by 11 to keep fract in 1.31 format */
- fract = (x & 0x000FFFFF) << 11;
-
- /* Read two nearest output values from the index in 1.31(q31) format */
- y0 = pYData[index];
- y1 = pYData[index + 1u];
-
- /* Calculation of y0 * (1-fract) and y is in 2.30 format */
- y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
-
- /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
- y += ((q31_t) (((q63_t) y1 * fract) >> 32));
-
- /* Convert y to 1.31 format */
- return (y << 1u);
-
- }
-
- }
-
- /**
- *
- * @brief Process function for the Q15 Linear Interpolation Function.
- * @param[in] *pYData pointer to Q15 Linear Interpolation table
- * @param[in] x input sample to process
- * @param[in] nValues number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- *
- */
-
-
- static __INLINE q15_t arm_linear_interp_q15(
- q15_t * pYData,
- q31_t x,
- uint32_t nValues)
- {
- q63_t y; /* output */
- q15_t y0, y1; /* Nearest output values */
- q31_t fract; /* fractional part */
- int32_t index; /* Index to read nearest output values */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- index = ((x & 0xFFF00000) >> 20u);
-
- if(index >= (int32_t)(nValues - 1))
- {
- return (pYData[nValues - 1]);
- }
- else if(index < 0)
- {
- return (pYData[0]);
- }
- else
- {
- /* 20 bits for the fractional part */
- /* fract is in 12.20 format */
- fract = (x & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- y0 = pYData[index];
- y1 = pYData[index + 1u];
-
- /* Calculation of y0 * (1-fract) and y is in 13.35 format */
- y = ((q63_t) y0 * (0xFFFFF - fract));
-
- /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
- y += ((q63_t) y1 * (fract));
-
- /* convert y to 1.15 format */
- return (y >> 20);
- }
-
-
- }
-
- /**
- *
- * @brief Process function for the Q7 Linear Interpolation Function.
- * @param[in] *pYData pointer to Q7 Linear Interpolation table
- * @param[in] x input sample to process
- * @param[in] nValues number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample x is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- */
-
-
- static __INLINE q7_t arm_linear_interp_q7(
- q7_t * pYData,
- q31_t x,
- uint32_t nValues)
- {
- q31_t y; /* output */
- q7_t y0, y1; /* Nearest output values */
- q31_t fract; /* fractional part */
- uint32_t index; /* Index to read nearest output values */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- if (x < 0)
- {
- return (pYData[0]);
- }
- index = (x >> 20) & 0xfff;
-
-
- if(index >= (nValues - 1))
- {
- return (pYData[nValues - 1]);
- }
- else
- {
-
- /* 20 bits for the fractional part */
- /* fract is in 12.20 format */
- fract = (x & 0x000FFFFF);
-
- /* Read two nearest output values from the index and are in 1.7(q7) format */
- y0 = pYData[index];
- y1 = pYData[index + 1u];
-
- /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
- y = ((y0 * (0xFFFFF - fract)));
-
- /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
- y += (y1 * fract);
-
- /* convert y to 1.7(q7) format */
- return (y >> 20u);
-
- }
-
- }
- /**
- * @} end of LinearInterpolate group
- */
-
- /**
- * @brief Fast approximation to the trigonometric sine function for floating-point data.
- * @param[in] x input value in radians.
- * @return sin(x).
- */
-
- float32_t arm_sin_f32(
- float32_t x);
-
- /**
- * @brief Fast approximation to the trigonometric sine function for Q31 data.
- * @param[in] x Scaled input value in radians.
- * @return sin(x).
- */
-
- q31_t arm_sin_q31(
- q31_t x);
-
- /**
- * @brief Fast approximation to the trigonometric sine function for Q15 data.
- * @param[in] x Scaled input value in radians.
- * @return sin(x).
- */
-
- q15_t arm_sin_q15(
- q15_t x);
-
- /**
- * @brief Fast approximation to the trigonometric cosine function for floating-point data.
- * @param[in] x input value in radians.
- * @return cos(x).
- */
-
- float32_t arm_cos_f32(
- float32_t x);
-
- /**
- * @brief Fast approximation to the trigonometric cosine function for Q31 data.
- * @param[in] x Scaled input value in radians.
- * @return cos(x).
- */
-
- q31_t arm_cos_q31(
- q31_t x);
-
- /**
- * @brief Fast approximation to the trigonometric cosine function for Q15 data.
- * @param[in] x Scaled input value in radians.
- * @return cos(x).
- */
-
- q15_t arm_cos_q15(
- q15_t x);
-
-
- /**
- * @ingroup groupFastMath
- */
-
-
- /**
- * @defgroup SQRT Square Root
- *
- * Computes the square root of a number.
- * There are separate functions for Q15, Q31, and floating-point data types.
- * The square root function is computed using the Newton-Raphson algorithm.
- * This is an iterative algorithm of the form:
- *
- * x1 = x0 - f(x0)/f'(x0)
- *
- * where x1 is the current estimate,
- * x0 is the previous estimate, and
- * f'(x0) is the derivative of f() evaluated at x0.
- * For the square root function, the algorithm reduces to:
- *
- * x0 = in/2 [initial guess]
- * x1 = 1/2 * ( x0 + in / x0) [each iteration]
- *
- */
-
-
- /**
- * @addtogroup SQRT
- * @{
- */
-
- /**
- * @brief Floating-point square root function.
- * @param[in] in input value.
- * @param[out] *pOut square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * in is negative value and returns zero output for negative values.
- */
-
- static __INLINE arm_status arm_sqrt_f32(
- float32_t in,
- float32_t * pOut)
- {
- if(in > 0)
- {
-
-// #if __FPU_USED
-#if (__FPU_USED == 1) && defined ( __CC_ARM )
- *pOut = __sqrtf(in);
-#else
- *pOut = sqrtf(in);
-#endif
-
- return (ARM_MATH_SUCCESS);
- }
- else
- {
- *pOut = 0.0f;
- return (ARM_MATH_ARGUMENT_ERROR);
- }
-
- }
-
-
- /**
- * @brief Q31 square root function.
- * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
- * @param[out] *pOut square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * in is negative value and returns zero output for negative values.
- */
- arm_status arm_sqrt_q31(
- q31_t in,
- q31_t * pOut);
-
- /**
- * @brief Q15 square root function.
- * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
- * @param[out] *pOut square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * in is negative value and returns zero output for negative values.
- */
- arm_status arm_sqrt_q15(
- q15_t in,
- q15_t * pOut);
-
- /**
- * @} end of SQRT group
- */
-
-
-
-
-
-
- /**
- * @brief floating-point Circular write function.
- */
-
- static __INLINE void arm_circularWrite_f32(
- int32_t * circBuffer,
- int32_t L,
- uint16_t * writeOffset,
- int32_t bufferInc,
- const int32_t * src,
- int32_t srcInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t wOffset;
-
- /* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
- wOffset = *writeOffset;
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the input sample to the circular buffer */
- circBuffer[wOffset] = *src;
-
- /* Update the input pointer */
- src += srcInc;
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- wOffset += bufferInc;
- if(wOffset >= L)
- wOffset -= L;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *writeOffset = wOffset;
- }
-
-
-
- /**
- * @brief floating-point Circular Read function.
- */
- static __INLINE void arm_circularRead_f32(
- int32_t * circBuffer,
- int32_t L,
- int32_t * readOffset,
- int32_t bufferInc,
- int32_t * dst,
- int32_t * dst_base,
- int32_t dst_length,
- int32_t dstInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t rOffset, dst_end;
-
- /* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
- rOffset = *readOffset;
- dst_end = (int32_t) (dst_base + dst_length);
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the sample from the circular buffer to the destination buffer */
- *dst = circBuffer[rOffset];
-
- /* Update the input pointer */
- dst += dstInc;
-
- if(dst == (int32_t *) dst_end)
- {
- dst = dst_base;
- }
-
- /* Circularly update rOffset. Watch out for positive and negative value */
- rOffset += bufferInc;
-
- if(rOffset >= L)
- {
- rOffset -= L;
- }
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *readOffset = rOffset;
- }
-
- /**
- * @brief Q15 Circular write function.
- */
-
- static __INLINE void arm_circularWrite_q15(
- q15_t * circBuffer,
- int32_t L,
- uint16_t * writeOffset,
- int32_t bufferInc,
- const q15_t * src,
- int32_t srcInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t wOffset;
-
- /* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
- wOffset = *writeOffset;
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the input sample to the circular buffer */
- circBuffer[wOffset] = *src;
-
- /* Update the input pointer */
- src += srcInc;
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- wOffset += bufferInc;
- if(wOffset >= L)
- wOffset -= L;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *writeOffset = wOffset;
- }
-
-
-
- /**
- * @brief Q15 Circular Read function.
- */
- static __INLINE void arm_circularRead_q15(
- q15_t * circBuffer,
- int32_t L,
- int32_t * readOffset,
- int32_t bufferInc,
- q15_t * dst,
- q15_t * dst_base,
- int32_t dst_length,
- int32_t dstInc,
- uint32_t blockSize)
- {
- uint32_t i = 0;
- int32_t rOffset, dst_end;
-
- /* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
- rOffset = *readOffset;
-
- dst_end = (int32_t) (dst_base + dst_length);
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the sample from the circular buffer to the destination buffer */
- *dst = circBuffer[rOffset];
-
- /* Update the input pointer */
- dst += dstInc;
-
- if(dst == (q15_t *) dst_end)
- {
- dst = dst_base;
- }
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- rOffset += bufferInc;
-
- if(rOffset >= L)
- {
- rOffset -= L;
- }
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *readOffset = rOffset;
- }
-
-
- /**
- * @brief Q7 Circular write function.
- */
-
- static __INLINE void arm_circularWrite_q7(
- q7_t * circBuffer,
- int32_t L,
- uint16_t * writeOffset,
- int32_t bufferInc,
- const q7_t * src,
- int32_t srcInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t wOffset;
-
- /* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
- wOffset = *writeOffset;
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the input sample to the circular buffer */
- circBuffer[wOffset] = *src;
-
- /* Update the input pointer */
- src += srcInc;
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- wOffset += bufferInc;
- if(wOffset >= L)
- wOffset -= L;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *writeOffset = wOffset;
- }
-
-
-
- /**
- * @brief Q7 Circular Read function.
- */
- static __INLINE void arm_circularRead_q7(
- q7_t * circBuffer,
- int32_t L,
- int32_t * readOffset,
- int32_t bufferInc,
- q7_t * dst,
- q7_t * dst_base,
- int32_t dst_length,
- int32_t dstInc,
- uint32_t blockSize)
- {
- uint32_t i = 0;
- int32_t rOffset, dst_end;
-
- /* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
- rOffset = *readOffset;
-
- dst_end = (int32_t) (dst_base + dst_length);
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the sample from the circular buffer to the destination buffer */
- *dst = circBuffer[rOffset];
-
- /* Update the input pointer */
- dst += dstInc;
-
- if(dst == (q7_t *) dst_end)
- {
- dst = dst_base;
- }
-
- /* Circularly update rOffset. Watch out for positive and negative value */
- rOffset += bufferInc;
-
- if(rOffset >= L)
- {
- rOffset -= L;
- }
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *readOffset = rOffset;
- }
-
-
- /**
- * @brief Sum of the squares of the elements of a Q31 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_power_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q63_t * pResult);
-
- /**
- * @brief Sum of the squares of the elements of a floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_power_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
- /**
- * @brief Sum of the squares of the elements of a Q15 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_power_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q63_t * pResult);
-
- /**
- * @brief Sum of the squares of the elements of a Q7 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_power_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
- /**
- * @brief Mean value of a Q7 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_mean_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q7_t * pResult);
-
- /**
- * @brief Mean value of a Q15 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
- void arm_mean_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult);
-
- /**
- * @brief Mean value of a Q31 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
- void arm_mean_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
- /**
- * @brief Mean value of a floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
- void arm_mean_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
- /**
- * @brief Variance of the elements of a floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_var_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
- /**
- * @brief Variance of the elements of a Q31 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_var_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q63_t * pResult);
-
- /**
- * @brief Variance of the elements of a Q15 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_var_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
- /**
- * @brief Root Mean Square of the elements of a floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_rms_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
- /**
- * @brief Root Mean Square of the elements of a Q31 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_rms_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
- /**
- * @brief Root Mean Square of the elements of a Q15 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_rms_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult);
-
- /**
- * @brief Standard deviation of the elements of a floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_std_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
- /**
- * @brief Standard deviation of the elements of a Q31 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_std_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
- /**
- * @brief Standard deviation of the elements of a Q15 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output value.
- * @return none.
- */
-
- void arm_std_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult);
-
- /**
- * @brief Floating-point complex magnitude
- * @param[in] *pSrc points to the complex input vector
- * @param[out] *pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- * @return none.
- */
-
- void arm_cmplx_mag_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q31 complex magnitude
- * @param[in] *pSrc points to the complex input vector
- * @param[out] *pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- * @return none.
- */
-
- void arm_cmplx_mag_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q15 complex magnitude
- * @param[in] *pSrc points to the complex input vector
- * @param[out] *pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- * @return none.
- */
-
- void arm_cmplx_mag_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q15 complex dot product
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[in] numSamples number of complex samples in each vector
- * @param[out] *realResult real part of the result returned here
- * @param[out] *imagResult imaginary part of the result returned here
- * @return none.
- */
-
- void arm_cmplx_dot_prod_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- uint32_t numSamples,
- q31_t * realResult,
- q31_t * imagResult);
-
- /**
- * @brief Q31 complex dot product
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[in] numSamples number of complex samples in each vector
- * @param[out] *realResult real part of the result returned here
- * @param[out] *imagResult imaginary part of the result returned here
- * @return none.
- */
-
- void arm_cmplx_dot_prod_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- uint32_t numSamples,
- q63_t * realResult,
- q63_t * imagResult);
-
- /**
- * @brief Floating-point complex dot product
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[in] numSamples number of complex samples in each vector
- * @param[out] *realResult real part of the result returned here
- * @param[out] *imagResult imaginary part of the result returned here
- * @return none.
- */
-
- void arm_cmplx_dot_prod_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- uint32_t numSamples,
- float32_t * realResult,
- float32_t * imagResult);
-
- /**
- * @brief Q15 complex-by-real multiplication
- * @param[in] *pSrcCmplx points to the complex input vector
- * @param[in] *pSrcReal points to the real input vector
- * @param[out] *pCmplxDst points to the complex output vector
- * @param[in] numSamples number of samples in each vector
- * @return none.
- */
-
- void arm_cmplx_mult_real_q15(
- q15_t * pSrcCmplx,
- q15_t * pSrcReal,
- q15_t * pCmplxDst,
- uint32_t numSamples);
-
- /**
- * @brief Q31 complex-by-real multiplication
- * @param[in] *pSrcCmplx points to the complex input vector
- * @param[in] *pSrcReal points to the real input vector
- * @param[out] *pCmplxDst points to the complex output vector
- * @param[in] numSamples number of samples in each vector
- * @return none.
- */
-
- void arm_cmplx_mult_real_q31(
- q31_t * pSrcCmplx,
- q31_t * pSrcReal,
- q31_t * pCmplxDst,
- uint32_t numSamples);
-
- /**
- * @brief Floating-point complex-by-real multiplication
- * @param[in] *pSrcCmplx points to the complex input vector
- * @param[in] *pSrcReal points to the real input vector
- * @param[out] *pCmplxDst points to the complex output vector
- * @param[in] numSamples number of samples in each vector
- * @return none.
- */
-
- void arm_cmplx_mult_real_f32(
- float32_t * pSrcCmplx,
- float32_t * pSrcReal,
- float32_t * pCmplxDst,
- uint32_t numSamples);
-
- /**
- * @brief Minimum value of a Q7 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *result is output pointer
- * @param[in] index is the array index of the minimum value in the input buffer.
- * @return none.
- */
-
- void arm_min_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q7_t * result,
- uint32_t * index);
-
- /**
- * @brief Minimum value of a Q15 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output pointer
- * @param[in] *pIndex is the array index of the minimum value in the input buffer.
- * @return none.
- */
-
- void arm_min_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult,
- uint32_t * pIndex);
-
- /**
- * @brief Minimum value of a Q31 vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output pointer
- * @param[out] *pIndex is the array index of the minimum value in the input buffer.
- * @return none.
- */
- void arm_min_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult,
- uint32_t * pIndex);
-
- /**
- * @brief Minimum value of a floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] *pResult is output pointer
- * @param[out] *pIndex is the array index of the minimum value in the input buffer.
- * @return none.
- */
-
- void arm_min_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult,
- uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a Q7 vector.
- * @param[in] *pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] *pResult maximum value returned here
- * @param[out] *pIndex index of maximum value returned here
- * @return none.
- */
-
- void arm_max_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q7_t * pResult,
- uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a Q15 vector.
- * @param[in] *pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] *pResult maximum value returned here
- * @param[out] *pIndex index of maximum value returned here
- * @return none.
- */
-
- void arm_max_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult,
- uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a Q31 vector.
- * @param[in] *pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] *pResult maximum value returned here
- * @param[out] *pIndex index of maximum value returned here
- * @return none.
- */
-
- void arm_max_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult,
- uint32_t * pIndex);
-
-/**
- * @brief Maximum value of a floating-point vector.
- * @param[in] *pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] *pResult maximum value returned here
- * @param[out] *pIndex index of maximum value returned here
- * @return none.
- */
-
- void arm_max_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult,
- uint32_t * pIndex);
-
- /**
- * @brief Q15 complex-by-complex multiplication
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- * @return none.
- */
-
- void arm_cmplx_mult_cmplx_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q31 complex-by-complex multiplication
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- * @return none.
- */
-
- void arm_cmplx_mult_cmplx_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Floating-point complex-by-complex multiplication
- * @param[in] *pSrcA points to the first input vector
- * @param[in] *pSrcB points to the second input vector
- * @param[out] *pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- * @return none.
- */
-
- void arm_cmplx_mult_cmplx_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Converts the elements of the floating-point vector to Q31 vector.
- * @param[in] *pSrc points to the floating-point input vector
- * @param[out] *pDst points to the Q31 output vector
- * @param[in] blockSize length of the input vector
- * @return none.
- */
- void arm_float_to_q31(
- float32_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Converts the elements of the floating-point vector to Q15 vector.
- * @param[in] *pSrc points to the floating-point input vector
- * @param[out] *pDst points to the Q15 output vector
- * @param[in] blockSize length of the input vector
- * @return none
- */
- void arm_float_to_q15(
- float32_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Converts the elements of the floating-point vector to Q7 vector.
- * @param[in] *pSrc points to the floating-point input vector
- * @param[out] *pDst points to the Q7 output vector
- * @param[in] blockSize length of the input vector
- * @return none
- */
- void arm_float_to_q7(
- float32_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q31 vector to Q15 vector.
- * @param[in] *pSrc is input pointer
- * @param[out] *pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- * @return none.
- */
- void arm_q31_to_q15(
- q31_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Converts the elements of the Q31 vector to Q7 vector.
- * @param[in] *pSrc is input pointer
- * @param[out] *pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- * @return none.
- */
- void arm_q31_to_q7(
- q31_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Converts the elements of the Q15 vector to floating-point vector.
- * @param[in] *pSrc is input pointer
- * @param[out] *pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- * @return none.
- */
- void arm_q15_to_float(
- q15_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q15 vector to Q31 vector.
- * @param[in] *pSrc is input pointer
- * @param[out] *pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- * @return none.
- */
- void arm_q15_to_q31(
- q15_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q15 vector to Q7 vector.
- * @param[in] *pSrc is input pointer
- * @param[out] *pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- * @return none.
- */
- void arm_q15_to_q7(
- q15_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @ingroup groupInterpolation
- */
-
- /**
- * @defgroup BilinearInterpolate Bilinear Interpolation
- *
- * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
- * The underlying function f(x, y) is sampled on a regular grid and the interpolation process
- * determines values between the grid points.
- * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
- * Bilinear interpolation is often used in image processing to rescale images.
- * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
- *
- * Algorithm
- * \par
- * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
- * For floating-point, the instance structure is defined as:
- *
- * typedef struct
- * {
- * uint16_t numRows;
- * uint16_t numCols;
- * float32_t *pData;
- * } arm_bilinear_interp_instance_f32;
- *
- *
- * \par
- * where numRows specifies the number of rows in the table;
- * numCols specifies the number of columns in the table;
- * and pData points to an array of size numRows*numCols values.
- * The data table pTable is organized in row order and the supplied data values fall on integer indexes.
- * That is, table element (x,y) is located at pTable[x + y*numCols] where x and y are integers.
- *
- * \par
- * Let (x, y) specify the desired interpolation point. Then define:
- *
- * XF = floor(x)
- * YF = floor(y)
- *
- * \par
- * The interpolated output point is computed as:
- *
- * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
- * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
- * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
- * + f(XF+1, YF+1) * (x-XF)*(y-YF)
- *
- * Note that the coordinates (x, y) contain integer and fractional components.
- * The integer components specify which portion of the table to use while the
- * fractional components control the interpolation processor.
- *
- * \par
- * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
- */
-
- /**
- * @addtogroup BilinearInterpolate
- * @{
- */
-
- /**
- *
- * @brief Floating-point bilinear interpolation.
- * @param[in,out] *S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate.
- * @param[in] Y interpolation coordinate.
- * @return out interpolated value.
- */
-
-
- static __INLINE float32_t arm_bilinear_interp_f32(
- const arm_bilinear_interp_instance_f32 * S,
- float32_t X,
- float32_t Y)
- {
- float32_t out;
- float32_t f00, f01, f10, f11;
- float32_t *pData = S->pData;
- int32_t xIndex, yIndex, index;
- float32_t xdiff, ydiff;
- float32_t b1, b2, b3, b4;
-
- xIndex = (int32_t) X;
- yIndex = (int32_t) Y;
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0
- || yIndex > (S->numCols - 1))
- {
- return (0);
- }
-
- /* Calculation of index for two nearest points in X-direction */
- index = (xIndex - 1) + (yIndex - 1) * S->numCols;
-
-
- /* Read two nearest points in X-direction */
- f00 = pData[index];
- f01 = pData[index + 1];
-
- /* Calculation of index for two nearest points in Y-direction */
- index = (xIndex - 1) + (yIndex) * S->numCols;
-
-
- /* Read two nearest points in Y-direction */
- f10 = pData[index];
- f11 = pData[index + 1];
-
- /* Calculation of intermediate values */
- b1 = f00;
- b2 = f01 - f00;
- b3 = f10 - f00;
- b4 = f00 - f01 - f10 + f11;
-
- /* Calculation of fractional part in X */
- xdiff = X - xIndex;
-
- /* Calculation of fractional part in Y */
- ydiff = Y - yIndex;
-
- /* Calculation of bi-linear interpolated output */
- out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
-
- /* return to application */
- return (out);
-
- }
-
- /**
- *
- * @brief Q31 bilinear interpolation.
- * @param[in,out] *S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate in 12.20 format.
- * @param[in] Y interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
-
- static __INLINE q31_t arm_bilinear_interp_q31(
- arm_bilinear_interp_instance_q31 * S,
- q31_t X,
- q31_t Y)
- {
- q31_t out; /* Temporary output */
- q31_t acc = 0; /* output */
- q31_t xfract, yfract; /* X, Y fractional parts */
- q31_t x1, x2, y1, y2; /* Nearest output values */
- int32_t rI, cI; /* Row and column indices */
- q31_t *pYData = S->pData; /* pointer to output table values */
- uint32_t nCols = S->numCols; /* num of rows */
-
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- rI = ((X & 0xFFF00000) >> 20u);
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- cI = ((Y & 0xFFF00000) >> 20u);
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
- {
- return (0);
- }
-
- /* 20 bits for the fractional part */
- /* shift left xfract by 11 to keep 1.31 format */
- xfract = (X & 0x000FFFFF) << 11u;
-
- /* Read two nearest output values from the index */
- x1 = pYData[(rI) + nCols * (cI)];
- x2 = pYData[(rI) + nCols * (cI) + 1u];
-
- /* 20 bits for the fractional part */
- /* shift left yfract by 11 to keep 1.31 format */
- yfract = (Y & 0x000FFFFF) << 11u;
-
- /* Read two nearest output values from the index */
- y1 = pYData[(rI) + nCols * (cI + 1)];
- y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
-
- /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
- out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
- acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
-
- /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
- out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
- acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
-
- /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
- out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
- acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
-
- /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
- out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
- acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
-
- /* Convert acc to 1.31(q31) format */
- return (acc << 2u);
-
- }
-
- /**
- * @brief Q15 bilinear interpolation.
- * @param[in,out] *S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate in 12.20 format.
- * @param[in] Y interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
-
- static __INLINE q15_t arm_bilinear_interp_q15(
- arm_bilinear_interp_instance_q15 * S,
- q31_t X,
- q31_t Y)
- {
- q63_t acc = 0; /* output */
- q31_t out; /* Temporary output */
- q15_t x1, x2, y1, y2; /* Nearest output values */
- q31_t xfract, yfract; /* X, Y fractional parts */
- int32_t rI, cI; /* Row and column indices */
- q15_t *pYData = S->pData; /* pointer to output table values */
- uint32_t nCols = S->numCols; /* num of rows */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- rI = ((X & 0xFFF00000) >> 20);
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- cI = ((Y & 0xFFF00000) >> 20);
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
- {
- return (0);
- }
-
- /* 20 bits for the fractional part */
- /* xfract should be in 12.20 format */
- xfract = (X & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- x1 = pYData[(rI) + nCols * (cI)];
- x2 = pYData[(rI) + nCols * (cI) + 1u];
-
-
- /* 20 bits for the fractional part */
- /* yfract should be in 12.20 format */
- yfract = (Y & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- y1 = pYData[(rI) + nCols * (cI + 1)];
- y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
-
- /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
-
- /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
- /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
- out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
- acc = ((q63_t) out * (0xFFFFF - yfract));
-
- /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
- out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
- acc += ((q63_t) out * (xfract));
-
- /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
- out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
- acc += ((q63_t) out * (yfract));
-
- /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
- out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
- acc += ((q63_t) out * (yfract));
-
- /* acc is in 13.51 format and down shift acc by 36 times */
- /* Convert out to 1.15 format */
- return (acc >> 36);
-
- }
-
- /**
- * @brief Q7 bilinear interpolation.
- * @param[in,out] *S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate in 12.20 format.
- * @param[in] Y interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
-
- static __INLINE q7_t arm_bilinear_interp_q7(
- arm_bilinear_interp_instance_q7 * S,
- q31_t X,
- q31_t Y)
- {
- q63_t acc = 0; /* output */
- q31_t out; /* Temporary output */
- q31_t xfract, yfract; /* X, Y fractional parts */
- q7_t x1, x2, y1, y2; /* Nearest output values */
- int32_t rI, cI; /* Row and column indices */
- q7_t *pYData = S->pData; /* pointer to output table values */
- uint32_t nCols = S->numCols; /* num of rows */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- rI = ((X & 0xFFF00000) >> 20);
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- cI = ((Y & 0xFFF00000) >> 20);
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
- {
- return (0);
- }
-
- /* 20 bits for the fractional part */
- /* xfract should be in 12.20 format */
- xfract = (X & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- x1 = pYData[(rI) + nCols * (cI)];
- x2 = pYData[(rI) + nCols * (cI) + 1u];
-
-
- /* 20 bits for the fractional part */
- /* yfract should be in 12.20 format */
- yfract = (Y & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- y1 = pYData[(rI) + nCols * (cI + 1)];
- y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
-
- /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
- out = ((x1 * (0xFFFFF - xfract)));
- acc = (((q63_t) out * (0xFFFFF - yfract)));
-
- /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
- out = ((x2 * (0xFFFFF - yfract)));
- acc += (((q63_t) out * (xfract)));
-
- /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
- out = ((y1 * (0xFFFFF - xfract)));
- acc += (((q63_t) out * (yfract)));
-
- /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
- out = ((y2 * (yfract)));
- acc += (((q63_t) out * (xfract)));
-
- /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
- return (acc >> 40);
-
- }
-
- /**
- * @} end of BilinearInterpolate group
- */
-
-
-#if defined ( __CC_ARM ) //Keil
-//SMMLAR
- #define multAcc_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
-
-//SMMLSR
- #define multSub_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
-
-//SMMULR
- #define mult_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
-
-//Enter low optimization region - place directly above function definition
- #define LOW_OPTIMIZATION_ENTER \
- _Pragma ("push") \
- _Pragma ("O1")
-
-//Exit low optimization region - place directly after end of function definition
- #define LOW_OPTIMIZATION_EXIT \
- _Pragma ("pop")
-
-//Enter low optimization region - place directly above function definition
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-
-//Exit low optimization region - place directly after end of function definition
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__ICCARM__) //IAR
- //SMMLA
- #define multAcc_32x32_keep32_R(a, x, y) \
- a += (q31_t) (((q63_t) x * y) >> 32)
-
- //SMMLS
- #define multSub_32x32_keep32_R(a, x, y) \
- a -= (q31_t) (((q63_t) x * y) >> 32)
-
-//SMMUL
- #define mult_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((q63_t) x * y ) >> 32)
-
-//Enter low optimization region - place directly above function definition
- #define LOW_OPTIMIZATION_ENTER \
- _Pragma ("optimize=low")
-
-//Exit low optimization region - place directly after end of function definition
- #define LOW_OPTIMIZATION_EXIT
-
-//Enter low optimization region - place directly above function definition
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
- _Pragma ("optimize=low")
-
-//Exit low optimization region - place directly after end of function definition
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__GNUC__)
- //SMMLA
- #define multAcc_32x32_keep32_R(a, x, y) \
- a += (q31_t) (((q63_t) x * y) >> 32)
-
- //SMMLS
- #define multSub_32x32_keep32_R(a, x, y) \
- a -= (q31_t) (((q63_t) x * y) >> 32)
-
-//SMMUL
- #define mult_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((q63_t) x * y ) >> 32)
-
- #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
-
- #define LOW_OPTIMIZATION_EXIT
-
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#endif
-
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* _ARM_MATH_H */
-
-
-/**
- *
- * End of file.
- */