diff --git a/libraries/u8glib/u8g_dev_ssd1306_128x32.c b/libraries/u8glib/u8g_dev_ssd1306_128x32.c deleted file mode 100644 --- a/libraries/u8glib/u8g_dev_ssd1306_128x32.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - - u8g_dev_ssd1306_128x32.c - - Universal 8bit Graphics Library - - Copyright (c) 2011, olikraus@gmail.com - All rights reserved. - - Redistribution and use in source and binary forms, with or without modification, - are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, this list - of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or other - materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - - 23 Feb 2013: Fixed, Issue 147 - -*/ - - -#include "u8g.h" - -#define WIDTH 128 -#define HEIGHT 32 -#define PAGE_HEIGHT 8 - - -/* init sequence adafruit 128x32 OLED (NOT TESTED) */ -static const uint8_t u8g_dev_ssd1306_128x32_adafruit1_init_seq[] PROGMEM = { - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ - U8G_ESC_CS(1), /* enable chip */ - - 0x0ae, /* display off, sleep mode */ - 0x0d5, 0x080, /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */ - 0x0a8, 0x03f, /* */ - - 0x0d3, 0x000, /* */ - - 0x040, /* start line */ - - 0x08d, 0x010, /* [1] charge pump setting (p62): 0x014 enable, 0x010 disable */ - - 0x020, 0x000, /* */ - 0x0a1, /* segment remap a0/a1*/ - 0x0c8, /* c0: scan dir normal, c8: reverse */ - 0x0da, 0x012, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */ - 0x081, 0x09f, /* [1] set contrast control */ - 0x0d9, 0x022, /* [1] pre-charge period 0x022/f1*/ - 0x0db, 0x040, /* vcomh deselect level */ - - 0x02e, /* 2012-05-27: Deactivate scroll */ - 0x0a4, /* output ram to display */ - 0x0a6, /* none inverted normal display mode */ - 0x0af, /* display on */ - - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_END /* end of sequence */ -}; - - -/* init sequence adafruit 128x32 OLED (NOT TESTED) */ -static const uint8_t u8g_dev_ssd1306_128x32_adafruit2_init_seq[] PROGMEM = { - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ - U8G_ESC_CS(1), /* enable chip */ - - 0x0ae, /* display off, sleep mode */ - 0x0d5, 0x080, /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */ - 0x0a8, 0x03f, /* */ - - 0x0d3, 0x000, /* */ - - 0x040, /* start line */ - - 0x08d, 0x014, /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */ - - 0x020, 0x000, /* */ - 0x0a1, /* segment remap a0/a1*/ - 0x0c8, /* c0: scan dir normal, c8: reverse */ - 0x0da, 0x012, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */ - 0x081, 0x0cf, /* [2] set contrast control */ - 0x0d9, 0x0f1, /* [2] pre-charge period 0x022/f1*/ - 0x0db, 0x040, /* vcomh deselect level */ - - 0x02e, /* 2012-05-27: Deactivate scroll */ - 0x0a4, /* output ram to display */ - 0x0a6, /* none inverted normal display mode */ - 0x0af, /* display on */ - - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_END /* end of sequence */ -}; - - -/* init sequence adafruit 128x32 OLED (TESTED - WORKING 23.02.13), like adafruit3, but with page addressing mode */ -static const uint8_t u8g_dev_ssd1306_128x32_adafruit3_init_seq[] PROGMEM = { - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ - U8G_ESC_CS(1), /* enable chip */ - - 0x0ae, /* display off, sleep mode */ - 0x0d5, 0x080, /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */ - 0x0a8, 0x01f, /* Feb 23, 2013: 128x32 OLED: 0x01f, 128x32 OLED 0x03f */ - - 0x0d3, 0x000, /* */ - - 0x040, /* start line */ - - 0x08d, 0x014, /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */ - - 0x020, 0x002, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5), Feb 23, 2013: 128x32 OLED: 0x002, 128x32 OLED 0x012 */ - 0x0a1, /* segment remap a0/a1*/ - 0x0c8, /* c0: scan dir normal, c8: reverse */ - 0x0da, 0x002, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */ - 0x081, 0x0cf, /* [2] set contrast control */ - 0x0d9, 0x0f1, /* [2] pre-charge period 0x022/f1*/ - 0x0db, 0x040, /* vcomh deselect level */ - - 0x02e, /* 2012-05-27: Deactivate scroll */ - 0x0a4, /* output ram to display */ - 0x0a6, /* none inverted normal display mode */ - 0x0af, /* display on */ - - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_END /* end of sequence */ -}; - - -/* init sequence Univision datasheet (NOT TESTED) */ -static const uint8_t u8g_dev_ssd1306_128x32_univision_init_seq[] PROGMEM = { - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */ - U8G_ESC_CS(1), /* enable chip */ - - 0x0ae, /* display off, sleep mode */ - 0x0d5, 0x080, /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */ - 0x0a8, 0x03f, /* multiplex ratio */ - 0x0d3, 0x000, /* display offset */ - 0x040, /* start line */ - 0x08d, 0x010, /* charge pump setting (p62): 0x014 enable, 0x010 disable */ - 0x0a1, /* segment remap a0/a1*/ - 0x0c8, /* c0: scan dir normal, c8: reverse */ - 0x0da, 0x012, /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */ - 0x081, 0x09f, /* set contrast control */ - 0x0d9, 0x022, /* pre-charge period */ - 0x0db, 0x040, /* vcomh deselect level */ - 0x022, 0x000, /* page addressing mode WRONG: 3 byte cmd! */ - 0x0a4, /* output ram to display */ - 0x0a6, /* none inverted normal display mode */ - 0x0af, /* display on */ - U8G_ESC_CS(0), /* disable chip */ - U8G_ESC_END /* end of sequence */ -}; - - -/* select one init sequence here */ -//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_univision_init_seq -//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit1_init_seq -//define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit2_init_seq -#define u8g_dev_ssd1306_128x32_init_seq u8g_dev_ssd1306_128x32_adafruit3_init_seq - - -static const uint8_t u8g_dev_ssd1306_128x32_data_start[] PROGMEM = { - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_CS(1), /* enable chip */ - 0x010, /* set upper 4 bit of the col adr. to 0 */ - 0x000, /* set lower 4 bit of the col adr. to 4 */ - U8G_ESC_END /* end of sequence */ -}; - -static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = { - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_CS(1), /* enable chip */ - 0x0ae, /* display off */ - U8G_ESC_CS(1), /* disable chip */ - U8G_ESC_END /* end of sequence */ -}; - -static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = { - U8G_ESC_ADR(0), /* instruction mode */ - U8G_ESC_CS(1), /* enable chip */ - 0x0af, /* display on */ - U8G_ESC_DLY(50), /* delay 50 ms */ - U8G_ESC_CS(1), /* disable chip */ - U8G_ESC_END /* end of sequence */ -}; - -uint8_t u8g_dev_ssd1306_128x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) -{ - switch(msg) - { - case U8G_DEV_MSG_INIT: - u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq); - break; - case U8G_DEV_MSG_STOP: - break; - case U8G_DEV_MSG_PAGE_NEXT: - { - u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start); - u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (SSD1306) */ - u8g_SetAddress(u8g, dev, 1); /* data mode */ - if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 ) - return 0; - u8g_SetChipSelect(u8g, dev, 0); - } - break; - case U8G_DEV_MSG_SLEEP_ON: - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); - return 1; - case U8G_DEV_MSG_SLEEP_OFF: - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); - return 1; -} - - return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg); -} - -uint8_t u8g_dev_ssd1306_128x32_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) -{ - switch(msg) - { - case U8G_DEV_MSG_INIT: - u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq); - break; - case U8G_DEV_MSG_STOP: - break; - case U8G_DEV_MSG_PAGE_NEXT: - { - u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); - - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start); - u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); /* select current page (SSD1306) */ - u8g_SetAddress(u8g, dev, 1); /* data mode */ - u8g_WriteSequence(u8g, dev, pb->width, pb->buf); - u8g_SetChipSelect(u8g, dev, 0); - - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start); - u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); /* select current page (SSD1306) */ - u8g_SetAddress(u8g, dev, 1); /* data mode */ - u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); - u8g_SetChipSelect(u8g, dev, 0); - } - break; - case U8G_DEV_MSG_SLEEP_ON: - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); - return 1; - case U8G_DEV_MSG_SLEEP_OFF: - u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); - return 1; - } - return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg); -} - -U8G_PB_DEV(u8g_dev_ssd1306_128x32_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SW_SPI); -U8G_PB_DEV(u8g_dev_ssd1306_128x32_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_HW_SPI); -U8G_PB_DEV(u8g_dev_ssd1306_128x32_i2c, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_ssd1306_128x32_fn, U8G_COM_SSD_I2C); - -uint8_t u8g_dev_ssd1306_128x32_2x_buf[WIDTH*2] U8G_NOCOMMON ; -u8g_pb_t u8g_dev_ssd1306_128x32_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1306_128x32_2x_buf}; -u8g_dev_t u8g_dev_ssd1306_128x32_2x_sw_spi = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_SW_SPI }; -u8g_dev_t u8g_dev_ssd1306_128x32_2x_hw_spi = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_HW_SPI }; -u8g_dev_t u8g_dev_ssd1306_128x32_2x_i2c = { u8g_dev_ssd1306_128x32_2x_fn, &u8g_dev_ssd1306_128x32_2x_pb, U8G_COM_SSD_I2C };