diff --git a/platform_config.h b/platform_config.h new file mode 100644 --- /dev/null +++ b/platform_config.h @@ -0,0 +1,164 @@ +/** + ****************************************************************************** + * @file platform_config.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Evaluation board specific configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __PLATFORM_CONFIG_H +#define __PLATFORM_CONFIG_H + +#define STM32L1XX_MD + +/* Includes ------------------------------------------------------------------*/ +#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS) + #include "stm32l1xx.h" + #include "evalcompat.h" +// #if defined (USE_STM32L152_EVAL) +// #include "stm32l152_eval.h" +// #elif defined (USE_STM32L152D_EVAL) +// #include "stm32l152d_eval.h" +// #else +// #error "Missing define: USE_STM32L152_EVAL or USE_STM32L152D_EVAL" +// #endif /* USE_STM32L152_EVAL */ +#elif defined (STM32F10X_MD) || defined (STM32F10X_HD) || defined (STM32F10X_XL) + #include "stm32f10x.h" + #if defined (USE_STM3210B_EVAL) + #include "stm3210b_eval.h" + #elif defined (USE_STM3210E_EVAL) + #include "stm3210e_eval.h" + #else + #error "Missing define: USE_STM3210B_EVAL or USE_STM3210E_EVAL" + #endif /* USE_STM3210B_EVAL */ +#elif defined (USE_STM32373C_EVAL) + #include "stm32f37x.h" + #include "stm32373c_eval.h" +#elif defined (USE_STM32303C_EVAL) + #include "stm32f30x.h" + #include "stm32303c_eval.h" +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line corresponding to the STMicroelectronics evaluation board + used to run the example */ +#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM32L152_EVAL) && !defined (USE_STM32L152D_EVAL) && !defined (USE_STM32373C_EVAL) && !defined (USE_STM32303C_EVAL) +//#define USE_STM3210B_EVAL +//#define USE_STM3210E_EVAL +#define USE_STM32L152_EVAL +//#define USE_STM32L152D_EVAL +//#define (USE_STM32373C_EVAL) +//#define USE_STM32303C_EVAL +#endif + +/*Unique Devices IDs register set*/ + +#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD) || defined(STM32L1XX_MD_PLUS) + +#define ID1 (0x1FF80050) +#define ID2 (0x1FF80054) +#define ID3 (0x1FF80064) + +#elif defined (STM32F37X) || defined(STM32F30X) + +#define ID1 (0x1FFFF7AC) +#define ID2 (0x1FFFF7B0) +#define ID3 (0x1FFFF7B4) + +#else /*STM32F1x*/ + +#define ID1 (0x1FFFF7E8) +#define ID2 (0x1FFFF7EC) +#define ID3 (0x1FFFF7F0) + +#endif + +/* Define the STM32F10x hardware depending on the used evaluation board */ +#ifdef USE_STM3210B_EVAL + #define USB_DISCONNECT GPIOD + #define USB_DISCONNECT_PIN GPIO_Pin_9 + #define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOD + #define EVAL_COM1_IRQHandler USART1_IRQHandler + +#elif defined (USE_STM3210E_EVAL) + #define USB_DISCONNECT GPIOB + #define USB_DISCONNECT_PIN GPIO_Pin_14 + #define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOB + #define EVAL_COM1_IRQHandler USART1_IRQHandler + + +#elif defined (USE_STM32L152_EVAL) || defined (USE_STM32L152D_EVAL) + /* + For STM32L15xx devices it is possible to use the internal USB pullup + controlled by register SYSCFG_PMC (refer to RM0038 reference manual for + more details). + It is also possible to use external pullup (and disable the internal pullup) + by setting the define USB_USE_EXTERNAL_PULLUP in file platform_config.h + and configuring the right pin to be used for the external pull up configuration. + To have more details on how to use an external pull up, please refer to + STM3210E-EVAL evaluation board manuals. + */ + /* Uncomment the following define to use an external pull up instead of the + integrated STM32L15xx internal pull up. In this case make sure to set up + correctly the external required hardware and the GPIO defines below.*/ +/* #define USB_USE_EXTERNAL_PULLUP */ + + #if !defined(USB_USE_EXTERNAL_PULLUP) + #define STM32L15_USB_CONNECT SYSCFG_USBPuCmd(ENABLE) + #define STM32L15_USB_DISCONNECT SYSCFG_USBPuCmd(DISABLE) + + #elif defined(USB_USE_EXTERNAL_PULLUP) + /* PA0 is chosen just as illustrating example, you should modify the defines + below according to your hardware configuration. */ + #define USB_DISCONNECT GPIOA + #define USB_DISCONNECT_PIN GPIO_Pin_0 + #define RCC_AHBPeriph_GPIO_DISCONNECT RCC_AHBPeriph_GPIOA + #define STM32L15_USB_CONNECT GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN) + #define STM32L15_USB_DISCONNECT GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN) + #endif /* USB_USE_EXTERNAL_PULLUP */ + +#elif defined (USE_STM32373C_EVAL) + #define USB_DISCONNECT GPIOC + #define USB_DISCONNECT_PIN GPIO_Pin_5 + #define RCC_AHBPeriph_GPIO_DISCONNECT RCC_AHBPeriph_GPIOC + +#elif defined (USE_STM32303C_EVAL) + #define USB_DISCONNECT GPIOB + #define USB_DISCONNECT_PIN GPIO_Pin_8 + #define RCC_AHBPeriph_GPIO_DISCONNECT RCC_AHBPeriph_GPIOB +#endif /* USE_STM3210B_EVAL */ + +#if defined (USE_STM32L152_EVAL) || (USE_STM32373C_EVAL) + #define EVAL_COM1_IRQHandler USART2_IRQHandler +#elif defined (USE_STM32L152D_EVAL) || (USE_STM32303C_EVAL) + #define EVAL_COM1_IRQHandler USART1_IRQHandler +#endif + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +#endif /* __PLATFORM_CONFIG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/