diff --git a/stm32f0xx_hal_msp.c b/stm32f0xx_hal_msp.c
deleted file mode 100644
--- a/stm32f0xx_hal_msp.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : stm32f0xx_hal_msp.c
-  * Date               : 05/12/2014 20:22:27
-  * Description        : This file provides code for the MSP Initialization
-  *                      and de-Initialization codes.
-  ******************************************************************************
-  *
-  * COPYRIGHT(c) 2014 STMicroelectronics
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
-  * Initializes the Global MSP.
-  */
-void HAL_MspInit(void)
-{
-  /* USER CODE BEGIN MspInit 0 */
-
-  /* USER CODE END MspInit 0 */
-
-  /* System interrupt init*/
-/* SysTick_IRQn interrupt configuration */
-  HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
-
-  /* USER CODE BEGIN MspInit 1 */
-
-  /* USER CODE END MspInit 1 */
-}
-
-void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct;
-  if(hcan->Instance==CAN)
-  {
-  /* USER CODE BEGIN CAN_MspInit 0 */
-
-  /* USER CODE END CAN_MspInit 0 */
-    /* Peripheral clock enable */
-    __CAN_CLK_ENABLE();
-
-    /**CAN GPIO Configuration
-    PB8     ------> CAN_RX
-    PB9     ------> CAN_TX
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF4_CAN;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN CAN_MspInit 1 */
-
-  /* USER CODE END CAN_MspInit 1 */
-  }
-
-}
-
-void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
-{
-
-  if(hcan->Instance==CAN)
-  {
-  /* USER CODE BEGIN CAN_MspDeInit 0 */
-
-  /* USER CODE END CAN_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __CAN_CLK_DISABLE();
-
-    /**CAN GPIO Configuration
-    PB8     ------> CAN_RX
-    PB9     ------> CAN_TX
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
-
-  /* USER CODE BEGIN CAN_MspDeInit 1 */
-
-  /* USER CODE END CAN_MspDeInit 1 */
-  }
-
-}
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/