diff --git a/stm32f0xx_hal_msp.c b/stm32f0xx_hal_msp.c
deleted file mode 100644
--- a/stm32f0xx_hal_msp.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : stm32f0xx_hal_msp.c
-  * Date               : 03/01/2015 14:04:02
-  * Description        : This file provides code for the MSP Initialization 
-  *                      and de-Initialization codes.
-  ******************************************************************************
-  *
-  * COPYRIGHT(c) 2015 STMicroelectronics
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
-  * Initializes the Global MSP.
-  */
-void HAL_MspInit(void)
-{
-  /* USER CODE BEGIN MspInit 0 */
-
-  /* USER CODE END MspInit 0 */
-
-  /* System interrupt init*/
-/* SysTick_IRQn interrupt configuration */
-  HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
-
-  /* USER CODE BEGIN MspInit 1 */
-
-  /* USER CODE END MspInit 1 */
-}
-
-/*
-void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct;
-  if(hspi->Instance==SPI1)
-  {
-    __SPI1_CLK_ENABLE();
-  
-    // SPI1 GPIO Configuration    
-   // PA5     ------> SPI1_SCK
-   //  PA6     ------> SPI1_MISO
-   // PA7     ------> SPI1_MOSI 
-    GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-  }
-
-}
-
-void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
-{
-
-  if(hspi->Instance==SPI1)
-  {
-    // Peripheral clock disable 
-    __SPI1_CLK_DISABLE();
-  
-    //SPI1 GPIO Configuration    
-   // PA5     ------> SPI1_SCK
-   // PA6     ------> SPI1_MISO
-   // PA7     ------> SPI1_MOSI 
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
-
-  }
-
-}
-*/
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/