/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.1
*
* Project: CMSIS DSP Library
* Title: arm_mat_scale_f32.c
*
* Description: Multiplies a floating-point matrix by a scalar.
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/**
* @ingroup groupMatrix
*/
/**
* @defgroup MatrixScale Matrix Scale
*
* Multiplies a matrix by a scalar. This is accomplished by multiplying each element in the
* matrix by the scalar. For example:
* \image html MatrixScale.gif "Matrix Scaling of a 3 x 3 matrix"
*
* The function checks to make sure that the input and output matrices are of the same size.
*
* In the fixed-point Q15 and Q31 functions, scale
is represented by
* a fractional multiplication scaleFract
and an arithmetic shift shift
.
* The shift allows the gain of the scaling operation to exceed 1.0.
* The overall scale factor applied to the fixed-point data is
*
* scale = scaleFract * 2^shift. **/ /** * @addtogroup MatrixScale * @{ */ /** * @brief Floating-point matrix scaling. * @param[in] *pSrc points to input matrix structure * @param[in] scale scale factor to be applied * @param[out] *pDst points to output matrix structure * @return The function returns either
ARM_MATH_SIZE_MISMATCH
* or ARM_MATH_SUCCESS
based on the outcome of size checking.
*
*/
arm_status arm_mat_scale_f32(
const arm_matrix_instance_f32 * pSrc,
float32_t scale,
arm_matrix_instance_f32 * pDst)
{
float32_t *pIn = pSrc->pData; /* input data matrix pointer */
float32_t *pOut = pDst->pData; /* output data matrix pointer */
uint32_t numSamples; /* total number of elements in the matrix */
uint32_t blkCnt; /* loop counters */
arm_status status; /* status of matrix scaling */
#ifndef ARM_MATH_CM0_FAMILY
float32_t in1, in2, in3, in4; /* temporary variables */
float32_t out1, out2, out3, out4; /* temporary variables */
#endif // #ifndef ARM_MATH_CM0_FAMILY
#ifdef ARM_MATH_MATRIX_CHECK
/* Check for matrix mismatch condition */
if((pSrc->numRows != pDst->numRows) || (pSrc->numCols != pDst->numCols))
{
/* Set status as ARM_MATH_SIZE_MISMATCH */
status = ARM_MATH_SIZE_MISMATCH;
}
else
#endif /* #ifdef ARM_MATH_MATRIX_CHECK */
{
/* Total number of samples in the input matrix */
numSamples = (uint32_t) pSrc->numRows * pSrc->numCols;
#ifndef ARM_MATH_CM0_FAMILY
/* Run the below code for Cortex-M4 and Cortex-M3 */
/* Loop Unrolling */
blkCnt = numSamples >> 2;
/* First part of the processing with loop unrolling. Compute 4 outputs at a time.
** a second loop below computes the remaining 1 to 3 samples. */
while(blkCnt > 0u)
{
/* C(m,n) = A(m,n) * scale */
/* Scaling and results are stored in the destination buffer. */
in1 = pIn[0];
in2 = pIn[1];
in3 = pIn[2];
in4 = pIn[3];
out1 = in1 * scale;
out2 = in2 * scale;
out3 = in3 * scale;
out4 = in4 * scale;
pOut[0] = out1;
pOut[1] = out2;
pOut[2] = out3;
pOut[3] = out4;
/* update pointers to process next sampels */
pIn += 4u;
pOut += 4u;
/* Decrement the numSamples loop counter */
blkCnt--;
}
/* If the numSamples is not a multiple of 4, compute any remaining output samples here.
** No loop unrolling is used. */
blkCnt = numSamples % 0x4u;
#else
/* Run the below code for Cortex-M0 */
/* Initialize blkCnt with number of samples */
blkCnt = numSamples;
#endif /* #ifndef ARM_MATH_CM0_FAMILY */
while(blkCnt > 0u)
{
/* C(m,n) = A(m,n) * scale */
/* The results are stored in the destination buffer. */
*pOut++ = (*pIn++) * scale;
/* Decrement the loop counter */
blkCnt--;
}
/* Set status as ARM_MATH_SUCCESS */
status = ARM_MATH_SUCCESS;
}
/* Return to application */
return (status);
}
/**
* @} end of MatrixScale group
*/