HydroBot/airsense-hardware Changeset - 2f48c728e62e

Changeset - 2f48c728e62e

Parent rev.

Child rev.

[Not reviewed]

default

0 4 0

matthewreed - 8 years ago 2017-01-31 20:12:17

Minor modifications to the schematic and CAM files before ordering

4 files changed with 54 insertions and 51 deletions:

AirSense.brd

AirSense.sch

CAM/AirSense.dri

CAM/AirSense.gpi

0 comments (0 inline, 0 general)

AirSense.brd

➞

Show inline comments

@@ @@ -7,57 +7,57 @@ @@
 <setting verticaltext="up"/>
 </settings>
 <grid distance="12.5" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="3.125" altunitdist="mil" altunit="mil"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
 <layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
 <layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
 <layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
 <layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
-<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
 <layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
 <layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
 <layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
 <layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
 <layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
 <layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
 <layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
 <layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
 <layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
 <layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
 <layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>
 <layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
 <layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
 <layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
 <layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
 <layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
 <layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
 <layer number="48" name="Document" color="7" fill="1" visible="no" active="yes"/>
 <layer number="49" name="Reference" color="7" fill="1" visible="no" active="yes"/>
 <layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
-<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="52" name="bDocu" color="7" fill="1" visible="no" active="yes"/>
 <layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
 <layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
 <layer number="55" name="dxf2" color="5" fill="1" visible="no" active="no"/>
 <layer number="56" name="wert" color="7" fill="1" visible="no" active="no"/>
 <layer number="57" name="tCAD" color="7" fill="1" visible="no" active="no"/>
 <layer number="59" name="tCarbon" color="7" fill="1" visible="no" active="no"/>
 <layer number="60" name="bCarbon" color="7" fill="1" visible="no" active="no"/>
 <layer number="61" name="pt_docu" color="7" fill="1" visible="no" active="no"/>
 <layer number="90" name="Modules" color="5" fill="1" visible="no" active="no"/>
 <layer number="91" name="Nets" color="2" fill="1" visible="no" active="no"/>
 <layer number="92" name="Busses" color="1" fill="1" visible="no" active="no"/>
@@ @@ -4123,25 +4123,25 @@ You are welcome to use this library for @@
 </package>
 </packages>
 </library>
 </libraries>
 <attributes>
 </attributes>
 <variantdefs>
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
-<designrules name="Elecrow_2-layer_eagle_rule *">
 <designrules name="Elecrow_2-layer_eagle_rule">
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für
 die meisten Anwendungen passen. Sollte ihre Platine
 besondere Anforderungen haben, treffen Sie die erforderlichen
 Einstellungen hier und speichern die Design Rules unter
 einem neuen Namen ab.</description>
 <description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 The default Design Rules have been set to cover
 a wide range of applications. Your particular design
 may have different requirements, so please make the
@@ @@ -4202,25 +4202,25 @@ design rules under a new name.</descript @@
 <param name="mlMaxStopFrame" value="2mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
 <param name="mlViaStopLimit" value="100mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
 <param name="slThermalIsolate" value="10mil"/>
 <param name="slThermalsForVias" value="0"/>
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkGrid" value="0"/>
-<param name="checkAngle" value="1"/>
+<param name="checkAngle" value="0"/>
 <param name="checkFont" value="1"/>
 <param name="checkRestrict" value="0"/>
 <param name="useDiameter" value="13"/>
 <param name="maxErrors" value="50"/>
 </designrules>
 <autorouter>
 <pass name="Default">
 <param name="RoutingGrid" value="50mil"/>
 <param name="AutoGrid" value="1"/>
 <param name="Efforts" value="0"/>
 <param name="TopRouterVariant" value="1"/>
 <param name="tpViaShape" value="round"/>

AirSense.sch

➞

Show inline comments

@@ @@ -3297,43 +3297,45 @@ Standard schematic elements and footprin @@
 <part name="SUPPLY5" library="SparkFun-Aesthetics" deviceset="VIN" device=""/>
 <part name="SUPPLY3" library="SparkFun-Aesthetics" deviceset="VIN" device=""/>
 <part name="Y1" library="Protofusion" deviceset="CRYSTAL" device="ABM8G" value="12MHz"/>
 <part name="GND3" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="C4" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="9pF"/>
 <part name="C2" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="9pF"/>
 <part name="Q1" library="SparkFun-DiscreteSemi" deviceset="MOSFET-PCHANNEL" device="" value=""/>
 <part name="R4" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="100k"/>
 <part name="D4" library="SparkFun-DiscreteSemi" deviceset="DIODE-ZENER" device="5.6V" value="8V"/>
 <part name="J1" library="Protofusion" deviceset="JST-PA-4" device="PTH"/>
 <part name="J2" library="Protofusion" deviceset="JST-PA-4" device="PTH"/>
 <part name="U3" library="Protofusion" deviceset="TSL2591" device=""/>
 <part name="SUPPLY12" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="GND17" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="C12" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="1uF"/>
 <part name="SUPPLY13" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="R7" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="1.5k"/>
 <part name="R8" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="1.5k"/>
 <part name="SUPPLY14" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="GND18" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <wire x1="147.32" y1="35.56" x2="147.32" y2="78.74" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="78.74" x2="147.32" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="132.08" x2="147.32" y2="185.42" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="78.74" x2="248.92" y2="78.74" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="78.74" x2="0" y2="78.74" width="0.4064" layer="94"/>
 <wire x1="0" y1="132.08" x2="55.88" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="55.88" y1="132.08" x2="147.32" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="55.88" y1="185.42" x2="55.88" y2="132.08" width="0.4064" layer="94"/>
 <text x="172.72" y="7.62" size="5.08" layer="94">Matthew Reed</text>
 <text x="241.3" y="7.62" size="2.54" layer="94">1.1</text>
 </plain>
 <instances>
 <instance part="U1" gate="G$1" x="78.74" y="45.72"/>
 <instance part="U2" gate="U1" x="200.66" y="152.4"/>
 <instance part="SUPPLY1" gate="G$1" x="12.7" y="71.12"/>
 <instance part="FRAME1" gate="G$1" x="0" y="0"/>
 <instance part="FRAME1" gate="V" x="147.32" y="0"/>
 <instance part="GND10" gate="1" x="96.52" y="149.86"/>
 <instance part="GND8" gate="1" x="71.12" y="149.86"/>
 <instance part="SUPPLY9" gate="G$1" x="177.8" y="60.96"/>
 <instance part="GND14" gate="1" x="177.8" y="45.72"/>
 <instance part="SUPPLY10" gate="G$1" x="177.8" y="162.56"/>
@@ @@ -3389,32 +3391,32 @@ Standard schematic elements and footprin @@
 <instance part="SUPPLY4" gate="G$1" x="71.12" y="165.1"/>
 <instance part="SUPPLY5" gate="G$1" x="96.52" y="165.1"/>
 <instance part="SUPPLY3" gate="G$1" x="25.4" y="121.92"/>
 <instance part="Y1" gate="Y1" x="20.32" y="22.86"/>
 <instance part="GND3" gate="1" x="20.32" y="5.08"/>
 <instance part="C4" gate="G$1" x="25.4" y="15.24"/>
 <instance part="C2" gate="G$1" x="15.24" y="17.78" rot="R180"/>
 <instance part="Q1" gate="G$1" x="33.02" y="119.38" rot="R90"/>
 <instance part="R4" gate="G$1" x="33.02" y="104.14" rot="R90"/>
 <instance part="D4" gate="G$1" x="40.64" y="114.3" rot="R90"/>
 <instance part="J1" gate="J1" x="78.74" y="160.02" rot="R180"/>
 <instance part="J2" gate="J1" x="104.14" y="160.02" rot="R180"/>
 <instance part="U3" gate="U1" x="203.2" y="111.76"/>
 <instance part="SUPPLY12" gate="G$1" x="175.26" y="121.92"/>
 <instance part="GND17" gate="1" x="175.26" y="101.6"/>
 <instance part="C12" gate="G$1" x="175.26" y="114.3" rot="R180"/>
 <instance part="SUPPLY13" gate="G$1" x="228.6" y="119.38"/>
 <instance part="R7" gate="G$1" x="195.58" y="124.46"/>
 <instance part="R8" gate="G$1" x="210.82" y="124.46"/>
 <instance part="SUPPLY14" gate="G$1" x="203.2" y="127"/>
 <instance part="U3" gate="U1" x="198.12" y="111.76"/>
 <instance part="GND17" gate="1" x="182.88" y="101.6"/>
 <instance part="C12" gate="G$1" x="223.52" y="106.68" rot="R180"/>
 <instance part="SUPPLY13" gate="G$1" x="223.52" y="119.38"/>
 <instance part="R7" gate="G$1" x="190.5" y="124.46"/>
 <instance part="R8" gate="G$1" x="205.74" y="124.46"/>
 <instance part="SUPPLY14" gate="G$1" x="198.12" y="127"/>
 <instance part="GND18" gate="1" x="223.52" y="96.52"/>
 </instances>
 <busses>
 </busses>
 <nets>
 <net name="3.3V" class="0">
 <segment>
 <pinref part="U1" gate="G$1" pin="VDD"/>
 <pinref part="SUPPLY1" gate="G$1" pin="3.3V"/>
 <wire x1="38.1" y1="68.58" x2="12.7" y2="68.58" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="68.58" x2="12.7" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="1"/>
 <wire x1="12.7" y1="68.58" x2="12.7" y2="66.04" width="0.1524" layer="91"/>
@@ @@ -3487,42 +3489,41 @@ Standard schematic elements and footprin @@
 <pinref part="R5" gate="G$1" pin="2"/>
 <wire x1="109.22" y1="104.14" x2="109.22" y2="99.06" width="0.1524" layer="91"/>
 <wire x1="101.6" y1="104.14" x2="109.22" y2="104.14" width="0.1524" layer="91"/>
 <junction x="109.22" y="104.14"/>
 </segment>
 <segment>
 <pinref part="SUPPLY7" gate="G$1" pin="3.3V"/>
 <wire x1="124.46" y1="165.1" x2="124.46" y2="162.56" width="0.1524" layer="91"/>
 <pinref part="J3" gate="G$1" pin="VCC"/>
 <wire x1="124.46" y1="162.56" x2="127" y2="162.56" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="SUPPLY12" gate="G$1" pin="3.3V"/>
 <pinref part="C12" gate="G$1" pin="2"/>
 <wire x1="175.26" y1="121.92" x2="175.26" y2="116.84" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <wire x1="223.52" y1="111.76" x2="223.52" y2="109.22" width="0.1524" layer="91"/>
 <junction x="223.52" y="111.76"/>
 <pinref part="U3" gate="U1" pin="VDD"/>
 <pinref part="SUPPLY13" gate="G$1" pin="3.3V"/>
 <wire x1="215.9" y1="111.76" x2="228.6" y2="111.76" width="0.1524" layer="91"/>
 <wire x1="228.6" y1="111.76" x2="228.6" y2="119.38" width="0.1524" layer="91"/>
 <wire x1="210.82" y1="111.76" x2="223.52" y2="111.76" width="0.1524" layer="91"/>
 <wire x1="223.52" y1="111.76" x2="223.52" y2="119.38" width="0.1524" layer="91"/>
 <junction x="223.52" y="111.76"/>
 </segment>
 <segment>
 <pinref part="R7" gate="G$1" pin="2"/>
-<wire x1="200.66" y1="124.46" x2="203.2" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="195.58" y1="124.46" x2="198.12" y2="124.46" width="0.1524" layer="91"/>
 <pinref part="SUPPLY14" gate="G$1" pin="3.3V"/>
-<wire x1="203.2" y1="127" x2="203.2" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="198.12" y1="127" x2="198.12" y2="124.46" width="0.1524" layer="91"/>
 <pinref part="R8" gate="G$1" pin="1"/>
 <wire x1="203.2" y1="124.46" x2="205.74" y2="124.46" width="0.1524" layer="91"/>
 <junction x="203.2" y="124.46"/>
 <wire x1="198.12" y1="124.46" x2="200.66" y2="124.46" width="0.1524" layer="91"/>
 <junction x="198.12" y="124.46"/>
 </segment>
 </net>
 <net name="GND" class="0">
 <segment>
 <wire x1="96.52" y1="154.94" x2="99.06" y2="154.94" width="0.1524" layer="91"/>
 <pinref part="GND10" gate="1" pin="GND"/>
 <wire x1="96.52" y1="154.94" x2="96.52" y2="152.4" width="0.1524" layer="91"/>
 <pinref part="J2" gate="J1" pin="4"/>
 </segment>
 <segment>
 <pinref part="GND8" gate="1" pin="GND"/>
 <wire x1="73.66" y1="154.94" x2="71.12" y2="154.94" width="0.1524" layer="91"/>
@@ @@ -3641,31 +3642,33 @@ Standard schematic elements and footprin @@
 <wire x1="15.24" y1="12.7" x2="15.24" y2="10.16" width="0.1524" layer="91"/>
 <pinref part="C4" gate="G$1" pin="2"/>
 <wire x1="15.24" y1="10.16" x2="20.32" y2="10.16" width="0.1524" layer="91"/>
 <wire x1="20.32" y1="10.16" x2="25.4" y2="10.16" width="0.1524" layer="91"/>
 <wire x1="25.4" y1="10.16" x2="25.4" y2="12.7" width="0.1524" layer="91"/>
 <pinref part="Y1" gate="Y1" pin="3"/>
 <wire x1="20.32" y1="17.78" x2="20.32" y2="10.16" width="0.1524" layer="91"/>
 <junction x="20.32" y="10.16"/>
 <pinref part="GND3" gate="1" pin="GND"/>
 <wire x1="20.32" y1="10.16" x2="20.32" y2="7.62" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U3" gate="U1" pin="GND"/>
 <wire x1="190.5" y1="106.68" x2="175.26" y2="106.68" width="0.1524" layer="91"/>
 <pinref part="GND18" gate="1" pin="GND"/>
 <pinref part="C12" gate="G$1" pin="1"/>
 <wire x1="175.26" y1="106.68" x2="175.26" y2="109.22" width="0.1524" layer="91"/>
 <wire x1="223.52" y1="101.6" x2="223.52" y2="99.06" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U3" gate="U1" pin="GND"/>
 <wire x1="185.42" y1="106.68" x2="182.88" y2="106.68" width="0.1524" layer="91"/>
 <pinref part="GND17" gate="1" pin="GND"/>
 <wire x1="175.26" y1="106.68" x2="175.26" y2="104.14" width="0.1524" layer="91"/>
 <junction x="175.26" y="106.68"/>
 <wire x1="182.88" y1="106.68" x2="182.88" y2="104.14" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="CAN_H" class="0">
 <segment>
 <wire x1="73.66" y1="160.02" x2="71.12" y2="160.02" width="0.1524" layer="91"/>
 <label x="71.12" y="160.02" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="J1" gate="J1" pin="2"/>
 </segment>
 <segment>
 <wire x1="99.06" y1="160.02" x2="96.52" y2="160.02" width="0.1524" layer="91"/>
 <label x="96.52" y="160.02" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="J2" gate="J1" pin="2"/>
@@ @@ -3959,60 +3962,60 @@ Standard schematic elements and footprin @@
 <pinref part="R4" gate="G$1" pin="2"/>
 <pinref part="Q1" gate="G$1" pin="G"/>
 <wire x1="33.02" y1="109.22" x2="33.02" y2="111.76" width="0.1524" layer="91"/>
 <pinref part="D4" gate="G$1" pin="A"/>
 <wire x1="33.02" y1="109.22" x2="40.64" y2="109.22" width="0.1524" layer="91"/>
 <wire x1="40.64" y1="109.22" x2="40.64" y2="111.76" width="0.1524" layer="91"/>
 <junction x="33.02" y="109.22"/>
 </segment>
 </net>
 <net name="SDA" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="SDA"/>
 <wire x1="215.9" y1="116.84" x2="218.44" y2="116.84" width="0.1524" layer="91"/>
 <label x="220.98" y="116.84" size="1.27" layer="95" xref="yes"/>
 <wire x1="218.44" y1="116.84" x2="220.98" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="218.44" y1="124.46" x2="218.44" y2="116.84" width="0.1524" layer="91"/>
 <junction x="218.44" y="116.84"/>
 <wire x1="210.82" y1="116.84" x2="213.36" y2="116.84" width="0.1524" layer="91"/>
 <label x="215.9" y="116.84" size="1.27" layer="95" xref="yes"/>
 <wire x1="213.36" y1="116.84" x2="215.9" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="213.36" y1="124.46" x2="213.36" y2="116.84" width="0.1524" layer="91"/>
 <junction x="213.36" y="116.84"/>
 <pinref part="R8" gate="G$1" pin="2"/>
-<wire x1="215.9" y1="124.46" x2="218.44" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="210.82" y1="124.46" x2="213.36" y2="124.46" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="I2C1_SDA/USART1_RX/PB7"/>
 <wire x1="119.38" y1="60.96" x2="124.46" y2="60.96" width="0.1524" layer="91"/>
 <label x="124.46" y="60.96" size="1.27" layer="95" xref="yes"/>
 </segment>
 </net>
 <net name="SCL" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="SCL"/>
 <wire x1="190.5" y1="116.84" x2="187.96" y2="116.84" width="0.1524" layer="91"/>
 <label x="185.42" y="116.84" size="1.27" layer="95" rot="R180" xref="yes"/>
 <wire x1="185.42" y1="116.84" x2="182.88" y2="116.84" width="0.1524" layer="91"/>
 <label x="180.34" y="116.84" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="R7" gate="G$1" pin="1"/>
 <wire x1="187.96" y1="116.84" x2="185.42" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="190.5" y1="124.46" x2="187.96" y2="124.46" width="0.1524" layer="91"/>
 <wire x1="187.96" y1="124.46" x2="187.96" y2="116.84" width="0.1524" layer="91"/>
 <junction x="187.96" y="116.84"/>
 <wire x1="182.88" y1="116.84" x2="180.34" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="185.42" y1="124.46" x2="182.88" y2="124.46" width="0.1524" layer="91"/>
 <wire x1="182.88" y1="124.46" x2="182.88" y2="116.84" width="0.1524" layer="91"/>
 <junction x="182.88" y="116.84"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="I2C1_SCL/USART1_TX/PB6"/>
 <wire x1="119.38" y1="58.42" x2="124.46" y2="58.42" width="0.1524" layer="91"/>
 <label x="124.46" y="58.42" size="1.27" layer="95" xref="yes"/>
 </segment>
 </net>
 <net name="INT" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="INT"/>
 <wire x1="190.5" y1="111.76" x2="185.42" y2="111.76" width="0.1524" layer="91"/>
 <label x="185.42" y="111.76" size="1.27" layer="95" rot="R180" xref="yes"/>
 <wire x1="185.42" y1="111.76" x2="180.34" y2="111.76" width="0.1524" layer="91"/>
 <label x="180.34" y="111.76" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="PB1/ADC9"/>
 <wire x1="38.1" y1="22.86" x2="35.56" y2="22.86" width="0.1524" layer="91"/>
 <label x="35.56" y="22.86" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 </net>
 </nets>
 </sheet>
 </sheets>
 </schematic>
 </drawing>

CAM/AirSense.dri

➞

Show inline comments

 Generated by EAGLE CAM Processor 7.5.0
-Drill Station Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.dri
+Drill Station Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.dri
- Date              : 21 Jan 2017 23:25:30
+ Date              : 31 Jan 2017 20:02:52
  Drills            : generated
  Device            : Excellon drill station, coordinate format 2.4 inch
 Parameter settings:
  Tolerance Drill + :  0.00 %
  Tolerance Drill - :  0.00 %
  Rotate            : no
  Mirror            : no
  Optimize          : yes
  Auto fit          : yes
  OffsetX           : 0inch
@@ @@ -27,13 +27,13 @@ Drills used: @@
  Code  Size       used
  T01   0.0130inch   132
  T02   0.0276inch     8
  T03   0.0433inch     4
  T04   0.1260inch     4
 Total number of drills: 148
 Plotfiles:
- /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.TXT
+ /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.TXT

CAM/AirSense.gpi

➞

Show inline comments

 Generated by EAGLE CAM Processor 7.5.0
-Photoplotter Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.gpi
+Photoplotter Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.gpi
  Date              : 21 Jan 2017 23:25:37
  Plotfile          : /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.GTL
  Date              : 31 Jan 2017 20:02:59
  Plotfile          : /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.GTL
  Apertures         : generated:
  Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
 Parameter settings:
  Emulate Apertures : no
  Tolerance Draw  + :  0.00 %
  Tolerance Draw  - :  0.00 %
  Tolerance Flash + :  0.00 %
  Tolerance Flash - :  0.00 %
  Rotate            : no
  Mirror            : no

0 comments (0 inline, 0 general)