HydroBot/airsense-hardware Changeset - 2f48c728e62e

Changeset - 2f48c728e62e

Parent rev.

Child rev.

[Not reviewed]

default

0 4 0

matthewreed - 8 years ago 2017-01-31 20:12:17

Minor modifications to the schematic and CAM files before ordering

4 files changed with 54 insertions and 51 deletions:

AirSense.brd

AirSense.sch

CAM/AirSense.dri

CAM/AirSense.gpi

0 comments (0 inline, 0 general)

AirSense.brd

➞

Show inline comments

@@ @@ -13,23 +13,23 @@ @@
 <layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
 <layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
 <layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
 <layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
-<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
 <layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
 <layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
 <layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
 <layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
 <layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
@@ @@ -45,13 +45,13 @@ @@
 <layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
 <layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
 <layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
 <layer number="48" name="Document" color="7" fill="1" visible="no" active="yes"/>
 <layer number="49" name="Reference" color="7" fill="1" visible="no" active="yes"/>
 <layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
-<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="52" name="bDocu" color="7" fill="1" visible="no" active="yes"/>
 <layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
 <layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
 <layer number="55" name="dxf2" color="5" fill="1" visible="no" active="no"/>
 <layer number="56" name="wert" color="7" fill="1" visible="no" active="no"/>
 <layer number="57" name="tCAD" color="7" fill="1" visible="no" active="no"/>
@@ @@ -4129,13 +4129,13 @@ You are welcome to use this library for @@
 <variantdefs>
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
-<designrules name="Elecrow_2-layer_eagle_rule *">
 <designrules name="Elecrow_2-layer_eagle_rule">
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für
 die meisten Anwendungen passen. Sollte ihre Platine
 besondere Anforderungen haben, treffen Sie die erforderlichen
 Einstellungen hier und speichern die Design Rules unter
@@ @@ -4208,13 +4208,13 @@ design rules under a new name.</descript @@
 <param name="srMaxRoundness" value="0mil"/>
 <param name="slThermalIsolate" value="10mil"/>
 <param name="slThermalsForVias" value="0"/>
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkGrid" value="0"/>
-<param name="checkAngle" value="1"/>
+<param name="checkAngle" value="0"/>
 <param name="checkFont" value="1"/>
 <param name="checkRestrict" value="0"/>
 <param name="useDiameter" value="13"/>
 <param name="maxErrors" value="50"/>
 </designrules>
 <autorouter>

AirSense.sch

➞

Show inline comments

@@ @@ -3303,31 +3303,33 @@ Standard schematic elements and footprin @@
 <part name="Q1" library="SparkFun-DiscreteSemi" deviceset="MOSFET-PCHANNEL" device="" value=""/>
 <part name="R4" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="100k"/>
 <part name="D4" library="SparkFun-DiscreteSemi" deviceset="DIODE-ZENER" device="5.6V" value="8V"/>
 <part name="J1" library="Protofusion" deviceset="JST-PA-4" device="PTH"/>
 <part name="J2" library="Protofusion" deviceset="JST-PA-4" device="PTH"/>
 <part name="U3" library="Protofusion" deviceset="TSL2591" device=""/>
 <part name="SUPPLY12" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="GND17" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="C12" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="1uF"/>
 <part name="SUPPLY13" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="R7" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="1.5k"/>
 <part name="R8" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="1.5k"/>
 <part name="SUPPLY14" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="GND18" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <wire x1="147.32" y1="35.56" x2="147.32" y2="78.74" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="78.74" x2="147.32" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="132.08" x2="147.32" y2="185.42" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="78.74" x2="248.92" y2="78.74" width="0.4064" layer="94"/>
 <wire x1="147.32" y1="78.74" x2="0" y2="78.74" width="0.4064" layer="94"/>
 <wire x1="0" y1="132.08" x2="55.88" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="55.88" y1="132.08" x2="147.32" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="55.88" y1="185.42" x2="55.88" y2="132.08" width="0.4064" layer="94"/>
 <text x="172.72" y="7.62" size="5.08" layer="94">Matthew Reed</text>
 <text x="241.3" y="7.62" size="2.54" layer="94">1.1</text>
 </plain>
 <instances>
 <instance part="U1" gate="G$1" x="78.74" y="45.72"/>
 <instance part="U2" gate="U1" x="200.66" y="152.4"/>
 <instance part="SUPPLY1" gate="G$1" x="12.7" y="71.12"/>
 <instance part="FRAME1" gate="G$1" x="0" y="0"/>
@@ @@ -3395,20 +3397,20 @@ Standard schematic elements and footprin @@
 <instance part="C2" gate="G$1" x="15.24" y="17.78" rot="R180"/>
 <instance part="Q1" gate="G$1" x="33.02" y="119.38" rot="R90"/>
 <instance part="R4" gate="G$1" x="33.02" y="104.14" rot="R90"/>
 <instance part="D4" gate="G$1" x="40.64" y="114.3" rot="R90"/>
 <instance part="J1" gate="J1" x="78.74" y="160.02" rot="R180"/>
 <instance part="J2" gate="J1" x="104.14" y="160.02" rot="R180"/>
 <instance part="U3" gate="U1" x="203.2" y="111.76"/>
 <instance part="SUPPLY12" gate="G$1" x="175.26" y="121.92"/>
 <instance part="GND17" gate="1" x="175.26" y="101.6"/>
 <instance part="C12" gate="G$1" x="175.26" y="114.3" rot="R180"/>
 <instance part="SUPPLY13" gate="G$1" x="228.6" y="119.38"/>
 <instance part="R7" gate="G$1" x="195.58" y="124.46"/>
 <instance part="R8" gate="G$1" x="210.82" y="124.46"/>
 <instance part="SUPPLY14" gate="G$1" x="203.2" y="127"/>
 <instance part="U3" gate="U1" x="198.12" y="111.76"/>
 <instance part="GND17" gate="1" x="182.88" y="101.6"/>
 <instance part="C12" gate="G$1" x="223.52" y="106.68" rot="R180"/>
 <instance part="SUPPLY13" gate="G$1" x="223.52" y="119.38"/>
 <instance part="R7" gate="G$1" x="190.5" y="124.46"/>
 <instance part="R8" gate="G$1" x="205.74" y="124.46"/>
 <instance part="SUPPLY14" gate="G$1" x="198.12" y="127"/>
 <instance part="GND18" gate="1" x="223.52" y="96.52"/>
 </instances>
 <busses>
 </busses>
 <nets>
 <net name="3.3V" class="0">
 <segment>
@@ @@ -3493,30 +3495,29 @@ Standard schematic elements and footprin @@
 <pinref part="SUPPLY7" gate="G$1" pin="3.3V"/>
 <wire x1="124.46" y1="165.1" x2="124.46" y2="162.56" width="0.1524" layer="91"/>
 <pinref part="J3" gate="G$1" pin="VCC"/>
 <wire x1="124.46" y1="162.56" x2="127" y2="162.56" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="SUPPLY12" gate="G$1" pin="3.3V"/>
 <pinref part="C12" gate="G$1" pin="2"/>
 <wire x1="175.26" y1="121.92" x2="175.26" y2="116.84" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <wire x1="223.52" y1="111.76" x2="223.52" y2="109.22" width="0.1524" layer="91"/>
 <junction x="223.52" y="111.76"/>
 <pinref part="U3" gate="U1" pin="VDD"/>
 <pinref part="SUPPLY13" gate="G$1" pin="3.3V"/>
 <wire x1="215.9" y1="111.76" x2="228.6" y2="111.76" width="0.1524" layer="91"/>
 <wire x1="228.6" y1="111.76" x2="228.6" y2="119.38" width="0.1524" layer="91"/>
 <wire x1="210.82" y1="111.76" x2="223.52" y2="111.76" width="0.1524" layer="91"/>
 <wire x1="223.52" y1="111.76" x2="223.52" y2="119.38" width="0.1524" layer="91"/>
 <junction x="223.52" y="111.76"/>
 </segment>
 <segment>
 <pinref part="R7" gate="G$1" pin="2"/>
-<wire x1="200.66" y1="124.46" x2="203.2" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="195.58" y1="124.46" x2="198.12" y2="124.46" width="0.1524" layer="91"/>
 <pinref part="SUPPLY14" gate="G$1" pin="3.3V"/>
-<wire x1="203.2" y1="127" x2="203.2" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="198.12" y1="127" x2="198.12" y2="124.46" width="0.1524" layer="91"/>
 <pinref part="R8" gate="G$1" pin="1"/>
 <wire x1="203.2" y1="124.46" x2="205.74" y2="124.46" width="0.1524" layer="91"/>
 <junction x="203.2" y="124.46"/>
 <wire x1="198.12" y1="124.46" x2="200.66" y2="124.46" width="0.1524" layer="91"/>
 <junction x="198.12" y="124.46"/>
 </segment>
 </net>
 <net name="GND" class="0">
 <segment>
 <wire x1="96.52" y1="154.94" x2="99.06" y2="154.94" width="0.1524" layer="91"/>
 <pinref part="GND10" gate="1" pin="GND"/>
@@ @@ -3647,19 +3648,21 @@ Standard schematic elements and footprin @@
 <wire x1="20.32" y1="17.78" x2="20.32" y2="10.16" width="0.1524" layer="91"/>
 <junction x="20.32" y="10.16"/>
 <pinref part="GND3" gate="1" pin="GND"/>
 <wire x1="20.32" y1="10.16" x2="20.32" y2="7.62" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U3" gate="U1" pin="GND"/>
 <wire x1="190.5" y1="106.68" x2="175.26" y2="106.68" width="0.1524" layer="91"/>
 <pinref part="GND18" gate="1" pin="GND"/>
 <pinref part="C12" gate="G$1" pin="1"/>
 <wire x1="175.26" y1="106.68" x2="175.26" y2="109.22" width="0.1524" layer="91"/>
 <wire x1="223.52" y1="101.6" x2="223.52" y2="99.06" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U3" gate="U1" pin="GND"/>
 <wire x1="185.42" y1="106.68" x2="182.88" y2="106.68" width="0.1524" layer="91"/>
 <pinref part="GND17" gate="1" pin="GND"/>
 <wire x1="175.26" y1="106.68" x2="175.26" y2="104.14" width="0.1524" layer="91"/>
 <junction x="175.26" y="106.68"/>
 <wire x1="182.88" y1="106.68" x2="182.88" y2="104.14" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="CAN_H" class="0">
 <segment>
 <wire x1="73.66" y1="160.02" x2="71.12" y2="160.02" width="0.1524" layer="91"/>
 <label x="71.12" y="160.02" size="1.27" layer="95" rot="R180" xref="yes"/>
@@ @@ -3965,48 +3968,48 @@ Standard schematic elements and footprin @@
 <junction x="33.02" y="109.22"/>
 </segment>
 </net>
 <net name="SDA" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="SDA"/>
 <wire x1="215.9" y1="116.84" x2="218.44" y2="116.84" width="0.1524" layer="91"/>
 <label x="220.98" y="116.84" size="1.27" layer="95" xref="yes"/>
 <wire x1="218.44" y1="116.84" x2="220.98" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="218.44" y1="124.46" x2="218.44" y2="116.84" width="0.1524" layer="91"/>
 <junction x="218.44" y="116.84"/>
 <wire x1="210.82" y1="116.84" x2="213.36" y2="116.84" width="0.1524" layer="91"/>
 <label x="215.9" y="116.84" size="1.27" layer="95" xref="yes"/>
 <wire x1="213.36" y1="116.84" x2="215.9" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="213.36" y1="124.46" x2="213.36" y2="116.84" width="0.1524" layer="91"/>
 <junction x="213.36" y="116.84"/>
 <pinref part="R8" gate="G$1" pin="2"/>
-<wire x1="215.9" y1="124.46" x2="218.44" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="210.82" y1="124.46" x2="213.36" y2="124.46" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="I2C1_SDA/USART1_RX/PB7"/>
 <wire x1="119.38" y1="60.96" x2="124.46" y2="60.96" width="0.1524" layer="91"/>
 <label x="124.46" y="60.96" size="1.27" layer="95" xref="yes"/>
 </segment>
 </net>
 <net name="SCL" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="SCL"/>
 <wire x1="190.5" y1="116.84" x2="187.96" y2="116.84" width="0.1524" layer="91"/>
 <label x="185.42" y="116.84" size="1.27" layer="95" rot="R180" xref="yes"/>
 <wire x1="185.42" y1="116.84" x2="182.88" y2="116.84" width="0.1524" layer="91"/>
 <label x="180.34" y="116.84" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="R7" gate="G$1" pin="1"/>
 <wire x1="187.96" y1="116.84" x2="185.42" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="190.5" y1="124.46" x2="187.96" y2="124.46" width="0.1524" layer="91"/>
 <wire x1="187.96" y1="124.46" x2="187.96" y2="116.84" width="0.1524" layer="91"/>
 <junction x="187.96" y="116.84"/>
 <wire x1="182.88" y1="116.84" x2="180.34" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="185.42" y1="124.46" x2="182.88" y2="124.46" width="0.1524" layer="91"/>
 <wire x1="182.88" y1="124.46" x2="182.88" y2="116.84" width="0.1524" layer="91"/>
 <junction x="182.88" y="116.84"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="I2C1_SCL/USART1_TX/PB6"/>
 <wire x1="119.38" y1="58.42" x2="124.46" y2="58.42" width="0.1524" layer="91"/>
 <label x="124.46" y="58.42" size="1.27" layer="95" xref="yes"/>
 </segment>
 </net>
 <net name="INT" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="INT"/>
 <wire x1="190.5" y1="111.76" x2="185.42" y2="111.76" width="0.1524" layer="91"/>
 <label x="185.42" y="111.76" size="1.27" layer="95" rot="R180" xref="yes"/>
 <wire x1="185.42" y1="111.76" x2="180.34" y2="111.76" width="0.1524" layer="91"/>
 <label x="180.34" y="111.76" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="PB1/ADC9"/>
 <wire x1="38.1" y1="22.86" x2="35.56" y2="22.86" width="0.1524" layer="91"/>
 <label x="35.56" y="22.86" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>

CAM/AirSense.dri

➞

Show inline comments

 Generated by EAGLE CAM Processor 7.5.0
-Drill Station Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.dri
+Drill Station Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.dri
- Date              : 21 Jan 2017 23:25:30
+ Date              : 31 Jan 2017 20:02:52
  Drills            : generated
  Device            : Excellon drill station, coordinate format 2.4 inch
 Parameter settings:
  Tolerance Drill + :  0.00 %
@@ @@ -33,7 +33,7 @@ Drills used: @@
  T04   0.1260inch     4
 Total number of drills: 148
 Plotfiles:
- /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.TXT
+ /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.TXT

CAM/AirSense.gpi

➞

Show inline comments

 Generated by EAGLE CAM Processor 7.5.0
-Photoplotter Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.gpi
+Photoplotter Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.gpi
  Date              : 21 Jan 2017 23:25:37
  Plotfile          : /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.GTL
  Date              : 31 Jan 2017 20:02:59
  Plotfile          : /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.GTL
  Apertures         : generated:
  Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
 Parameter settings:
  Emulate Apertures : no

0 comments (0 inline, 0 general)