seniordesign-hardware Changeset - 438a770d0e24

Changeset - 438a770d0e24

Parent rev.

Child rev.

[Not reviewed]

Merge default

0 6 0

kripperger@CL-SEC241-09.cedarville.edu - 13 years ago 2012-11-01 20:33:04
kripperger@CL-SEC241-09.cedarville.edu

merge

6 files changed with 2413 insertions and 265 deletions:

dru/LaenPCBOrder.dru

master/master.brd

141

137

master/master.sch

464

slave-daughter/slave-daughter-camera.brd

121

slave-daughter/slave-daughter-camera.sch

1643

slave-daughter/slave-daughter-sensors.brd

0 comments (0 inline, 0 general)

dru/LaenPCBOrder.dru

➞

Show inline comments

@@ @@ -18,8 +18,8 @@ mdCopperDimension = 15mil @@
 mdDrill = 6mil
 mdSmdStop = 0mil
 msWidth = 6mil
 msDrill = 13mil
 msMicroVia = 13mil
 msDrill = 6mil
 msMicroVia = 6mil
 msBlindViaRatio = 0.500000
 rvPadTop = 0.250000
 rvPadInner = 0.250000
@@ @@ -57,14 +57,10 @@ mlViaStopLimit = 0mil @@
 srRoundness = 0.000000
 srMinRoundness = 0mil
 srMaxRoundness = 0mil
 slThermalGap = 0.500000
 slMinThermalGap = 20mil
 slMaxThermalGap = 100mil
 slAnnulusIsolate = 20mil
 slThermalIsolate = 10mil
 slAnnulusRestring = 0
 slThermalRestring = 1
 slThermalsForVias = 0
 dpMaxLengthDifference = 10mm
 dpGapFactor = 2.500000
 checkGrid = 0
 checkAngle = 0
 checkFont = 1

master/master.brd

➞

Show inline comments

@@ @@ -9,7 +9,7 @@ @@
 <grid distance="0.05" unitdist="inch" unit="mil" style="lines" multiple="1" display="no" altdistance="12.5" altunitdist="mil" altunit="mil"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
@@ @@ -134,7 +134,7 @@ @@
 <hole x="3.175" y="3.175" drill="3.2"/>
 <hole x="3.175" y="50.165" drill="3.2"/>
 <hole x="50.165" y="50.165" drill="3.2"/>
-<hole x="49.53" y="3.175" drill="3.2"/>
+<hole x="49.8475" y="3.175" drill="3.2"/>
 <circle x="46.99" y="31.115" radius="0.127" width="0.4064" layer="21"/>
 <circle x="24.4475" y="39.0525" radius="0.127" width="0.4064" layer="21"/>
 <text x="10.16" y="59.69" size="1.778" layer="21">TODO: USE NICK"S THING</text>
@@ @@ -553,43 +553,41 @@ Based on the following sources:<p> @@
 </library>
 <library name="con-coax">
 <packages>
 <package name="BU-SMA-H">
 <description>FEMALE &lt;b&gt;SMA CONNECTOR&lt;/b&gt;&lt;p&gt;
 Radiall&lt;p&gt;</description>
 <wire x1="-1.1" y1="3.2" x2="1.1" y2="3.2" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="1.1" x2="3.2" y2="-1.1" width="0.2032" layer="21"/>
 <wire x1="1.1" y1="-3.2" x2="-1.1" y2="-3.2" width="0.2032" layer="21"/>
 <wire x1="-3.2" y1="-1.1" x2="-3.2" y2="1.1" width="0.2032" layer="21"/>
 <wire x1="-3.1999" y1="3.1999" x2="3.2" y2="3.2" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="3.2" x2="3.2" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="3.2" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="-2.9" x2="3.1999" y2="-3.1999" width="0.2032" layer="51"/>
 <wire x1="3.1999" y1="-3.1999" x2="-3.2" y2="-3.2" width="0.2032" layer="51"/>
 <wire x1="-3.2" y1="-3.2" x2="-3.1999" y2="3.1999" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="4.3" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="2.9" x2="8.6" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="3.4" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11.6" y1="-2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="3.4" x2="10.7" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="-2.9" x2="4.3" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="-2.9" x2="8.3" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.6" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="-3.4" x2="11" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11.6" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="-3.4" x2="10.7" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <circle x="0" y="0" radius="3.1999" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.7" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="1.27"/>
 <pad name="2" x="-2.5499" y="2.5499" drill="1.778"/>
 <pad name="3" x="2.5499" y="2.5499" drill="1.778"/>
 <pad name="4" x="2.5499" y="-2.5499" drill="1.778"/>
 <pad name="5" x="-2.5499" y="-2.5499" drill="1.778"/>
 <text x="-2.54" y="4.445" size="1.27" layer="25">&gt;NAME</text>
 <text x="-3.175" y="-5.715" size="1.27" layer="27">&gt;VALUE</text>
 <package name="J502-ND-142-0711-821/826">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="4.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.1" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="3.85" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.1154" y="0" dx="4.191" dy="1.778" layer="1"/>
 <smd name="G@1" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@2" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@4" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="16"/>
 <smd name="G@3" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 </packages>
 </library>
@@ @@ -926,12 +924,12 @@ www.irf.com<p> @@
 <variantdefs>
 </variantdefs>
 <classes>
-<class number="0" name="default" width="0.2032" drill="0.3048">
 <class number="0" name="default" width="0.2032" drill="0">
 <clearance class="0" value="0.2032"/>
 </class>
 <class number="1" name="power" width="0.508" drill="0">
 </class>
-<class number="2" name="20" width="0.508" drill="0">
+<class number="2" name="whatisthis" width="0.508" drill="0">
 </class>
 </classes>
 <designrules name="LaenPCBOrder *">
@@ @@ -1159,24 +1157,12 @@ Please make sure your boards conform to @@
 <element name="C21" library="SparkFun" package="0603-CAP" value="0.1uF" x="21.59" y="35.2425" rot="R90"/>
 <element name="C20" library="SparkFun" package="0603-CAP" value="10uF" x="26.9875" y="39.6875" rot="R180"/>
 <element name="U3" library="Seeed" package="NEO-5Q" value="NEO-5Q" x="3.175" y="12.7" rot="R90"/>
 <element name="R23" library="SparkFun" package="0603-RES" value="10R" x="6.985" y="26.9875"/>
 <element name="L5" library="SparkFun" package="C0402" value="27nH" x="6.985" y="28.575"/>
 <element name="R23" library="SparkFun" package="0603-RES" value="10R" x="7.3025" y="26.67"/>
 <element name="L5" library="SparkFun" package="C0402" value="27nH" x="7.46125" y="28.2575"/>
 <element name="U7" library="SeniorDesign" package="SOT23-5" value="24AA32AFT" x="10.795" y="9.525" rot="R180"/>
 <element name="U$7" library="SeniorDesign" package="MS412FE-FL26E" value="MS412FE-FL26E" x="6.35" y="8.89" rot="R180"/>
 <element name="D2" library="SparkFun" package="SOD-323" value="SCHOTTKEY" x="15.24" y="10.16"/>
 <element name="R3" library="SparkFun" package="0603-RES" value="220R" x="19.05" y="8.89" rot="R270"/>
 <element name="X5" library="con-coax" package="BU-SMA-H" value="BU-SMA-H" x="4.445" y="33.655" rot="R180">
 <attribute name="OC_NEWARK" value="unknown" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MPN" value="" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MF" value="" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="OC_FARNELL" value="unknown" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
 <element name="X2" library="con-coax" package="BU-SMA-H" value="BU-SMA-H" x="4.445" y="44.45" rot="R180">
 <attribute name="OC_NEWARK" value="unknown" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MPN" value="" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MF" value="" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="OC_FARNELL" value="unknown" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
 <element name="AUX0" library="adafruit" package="CHIPLED_0603" value="ORANGE" x="29.21" y="26.67" rot="R90"/>
 <element name="R13" library="SparkFun" package="0603-RES" value="10k" x="29.21" y="27.94"/>
 <element name="AUX1" library="adafruit" package="CHIPLED_0603" value="VIOLET" x="25.4" y="26.67" rot="R90"/>
@@ @@ -1202,6 +1188,18 @@ Please make sure your boards conform to @@
 <element name="C22" library="SparkFun" package="0603-CAP" value="10uF" x="4.445" y="23.8125" rot="MR90"/>
 <element name="R6" library="SparkFun" package="0603-RES" value="100k" x="26.035" y="10.16"/>
 <element name="R12" library="SparkFun" package="0603-ARV" value="4.7k" x="26.035" y="7.62" rot="R90"/>
 <element name="X1" library="con-coax" package="J502-ND-142-0711-821/826" value="SMA-142-0711-821/826" x="0" y="42.545">
 <attribute name="OC_NEWARK" value="16F3627" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="142-0711-821" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 <attribute name="MF" value="JOHNSON COMPONENTS" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 <attribute name="OC_FARNELL" value="1019328" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 </element>
 <element name="X3" library="con-coax" package="J502-ND-142-0711-821/826" value="SMA-142-0711-821/826" x="0" y="32.385">
 <attribute name="OC_NEWARK" value="16F3627" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="142-0711-821" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 <attribute name="MF" value="JOHNSON COMPONENTS" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 <attribute name="OC_FARNELL" value="1019328" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 </element>
 </elements>
 <signals>
 <signal name="GND">
@@ @@ -1257,16 +1255,6 @@ Please make sure your boards conform to @@
 <contactref element="U7" pad="2"/>
 <contactref element="U7" pad="5"/>
 <contactref element="U$7" pad="V-"/>
 <contactref element="X5" pad="2"/>
 <contactref element="X5" pad="4"/>
 <contactref element="X5" pad="3"/>
 <contactref element="X5" pad="5"/>
 <contactref element="X5" pad="2"/>
 <contactref element="X2" pad="2"/>
 <contactref element="X2" pad="4"/>
 <contactref element="X2" pad="3"/>
 <contactref element="X2" pad="5"/>
 <contactref element="X2" pad="2"/>
 <contactref element="AUX0" pad="C"/>
 <wire x1="40.25" y1="38.735" x2="43.815" y2="38.735" width="0.8128" layer="1"/>
 <wire x1="43.815" y1="38.735" x2="44.45" y2="38.1" width="0.8128" layer="1"/>
@@ @@ -1276,20 +1264,17 @@ Please make sure your boards conform to @@
 <contactref element="AUX2" pad="C"/>
 <contactref element="AUX3" pad="C"/>
 <wire x1="2.59" y1="9.6" x2="2.55" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="9.175" x2="11.745" y2="8.225" width="0.4064" layer="1"/>
 <wire x1="11.775" y1="8.255" x2="11.745" y2="8.225" width="0.4064" layer="1"/>
 <wire x1="36.83" y1="22.31" x2="36.83" y2="24.55" width="0.4064" layer="1"/>
 <wire x1="36.83" y1="24.55" x2="37.68" y2="25.4" width="0.4064" layer="1"/>
-<wire x1="39.79" y1="25.4" x2="37.68" y2="25.4" width="0.4064" layer="1"/>
+<wire x1="38.735" y1="25.4" x2="37.68" y2="25.4" width="0.4064" layer="1"/>
 <wire x1="38.95" y1="48.895" x2="38.95" y2="50.38" width="0.4064" layer="1"/>
 <wire x1="38.95" y1="50.38" x2="39.37" y2="50.8" width="0.4064" layer="1"/>
 <contactref element="SETGPS" pad="2"/>
 <contactref element="IC3" pad="3"/>
 <contactref element="IC3" pad="1"/>
 <contactref element="IC3" pad="3"/>
 <wire x1="3.175" y1="12.9" x2="3.175" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="3.175" y1="9.64" x2="2.55" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="3.175" y1="9.64" x2="10.795" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="2.55" y1="9.64" x2="10.795" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="9.64" x2="10.795" y2="9.175" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="10.815" x2="10.795" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="31.03" y1="16.51" x2="28.0425" y2="16.51" width="0.4064" layer="1"/>
@@ @@ -1297,7 +1282,7 @@ Please make sure your boards conform to @@
 <wire x1="28.0425" y1="16.51" x2="27.94" y2="16.6125" width="0.4064" layer="1"/>
 <contactref element="R27" pad="2"/>
 <contactref element="Q9" pad="E"/>
 <polygon width="0.4064" layer="1">
+<polygon width="0.4064" layer="1" isolate="0.254">
 <vertex x="-2.54" y="57.15"/>
 <vertex x="20.32" y="57.15"/>
 <vertex x="20.32" y="5.08"/>
@@ @@ -1321,7 +1306,6 @@ Please make sure your boards conform to @@
 <via x="14.2875" y="6.35" extent="1-16" drill="0.254"/>
 <via x="12.7" y="9.2075" extent="1-16" drill="0.254"/>
 <wire x1="11.745" y1="8.225" x2="11.745" y2="7.935" width="0.4064" layer="1"/>
 <wire x1="11.745" y1="7.935" x2="12.7" y2="9.2075" width="0.4064" layer="1"/>
 <wire x1="14.39" y1="7.3025" x2="14.39" y2="6.4525" width="0.4064" layer="1"/>
 <wire x1="14.39" y1="6.4525" x2="14.2875" y2="6.35" width="0.4064" layer="1"/>
 <via x="9.525" y="1.905" extent="1-16" drill="0.254"/>
@@ @@ -1393,8 +1377,8 @@ Please make sure your boards conform to @@
 <via x="22.225" y="37.7825" extent="1-16" drill="0.254"/>
 <wire x1="31.43" y1="43.35" x2="33.3375" y2="43.35" width="0.4064" layer="1"/>
 <wire x1="33.3375" y1="43.35" x2="33.3375" y2="43.4975" width="0.4064" layer="1"/>
 <via x="38.735" y="26.3525" extent="1-16" drill="0.254"/>
 <wire x1="38.735" y1="26.3525" x2="38.735" y2="25.4" width="0.4064" layer="1"/>
 <via x="38.735" y="28.8925" extent="1-16" drill="0.254"/>
 <wire x1="38.735" y1="28.8925" x2="38.735" y2="25.4" width="0.4064" layer="1"/>
 <wire x1="38.735" y1="25.4" x2="39.79" y2="25.4" width="0.4064" layer="1"/>
 <via x="26.67" y="17.145" extent="1-16" drill="0.254"/>
 <wire x1="26.67" y1="17.145" x2="26.67" y2="16.51" width="0.4064" layer="1"/>
@@ @@ -1440,17 +1424,10 @@ Please make sure your boards conform to @@
 <via x="17.145" y="1.905" extent="1-16" drill="0.254"/>
 <wire x1="18.3" y1="1.27" x2="17.78" y2="1.27" width="0.4064" layer="1"/>
 <wire x1="17.78" y1="1.27" x2="17.145" y2="1.905" width="0.4064" layer="1"/>
 <via x="3.4925" y="29.845" extent="1-16" drill="0.254"/>
 <via x="3.4925" y="28.8925" extent="1-16" drill="0.254"/>
 <via x="3.4925" y="27.94" extent="1-16" drill="0.254"/>
 <via x="3.4925" y="26.9875" extent="1-16" drill="0.254"/>
 <via x="5.3975" y="29.845" extent="1-16" drill="0.254"/>
 <via x="8.5725" y="29.21" extent="1-16" drill="0.254"/>
 <via x="8.5725" y="28.2575" extent="1-16" drill="0.254"/>
 <via x="9.525" y="27.305" extent="1-16" drill="0.254"/>
 <via x="3.01625" y="26.67" extent="1-16" drill="0.254"/>
 <via x="9.04875" y="28.2575" extent="1-16" drill="0.254"/>
 <via x="9.525" y="26.3525" extent="1-16" drill="0.254"/>
 <via x="2.54" y="26.9875" extent="1-16" drill="0.254"/>
 <via x="1.5875" y="26.9875" extent="1-16" drill="0.254"/>
 <via x="2.06375" y="26.67" extent="1-16" drill="0.254"/>
 <via x="0.9525" y="26.035" extent="1-16" drill="0.254"/>
 <via x="0.9525" y="25.0825" extent="1-16" drill="0.254"/>
 <via x="0.9525" y="24.13" extent="1-16" drill="0.254"/>
@@ @@ -1482,6 +1459,25 @@ Please make sure your boards conform to @@
 <via x="18.7325" y="22.38375" extent="1-16" drill="0.254"/>
 <via x="18.7325" y="14.76375" extent="1-16" drill="0.254"/>
 <via x="18.7325" y="15.71625" extent="1-16" drill="0.254"/>
 <contactref element="X1" pad="G@1"/>
 <contactref element="X1" pad="G@2"/>
 <contactref element="X1" pad="G@3"/>
 <contactref element="X1" pad="G@4"/>
 <contactref element="X3" pad="G@1"/>
 <contactref element="X3" pad="G@2"/>
 <contactref element="X3" pad="G@3"/>
 <contactref element="X3" pad="G@4"/>
 <contactref element="X1" pad="G@1"/>
 <contactref element="X3" pad="G@1"/>
 <via x="4.92125" y="28.8925" extent="1-16" drill="0.254"/>
 <via x="4.92125" y="29.845" extent="1-16" drill="0.254"/>
 <via x="4.92125" y="30.7975" extent="1-16" drill="0.254"/>
 <via x="6.985" y="29.68625" extent="1-16" drill="0.254"/>
 <via x="6.985" y="30.63875" extent="1-16" drill="0.254"/>
 <via x="6.985" y="31.75" extent="1-16" drill="0.254"/>
 <via x="6.19125" y="32.86125" extent="1-16" drill="0.254"/>
 <via x="5.23875" y="33.49625" extent="1-16" drill="0.254"/>
 <via x="7.9375" y="29.68625" extent="1-16" drill="0.254"/>
 <wire x1="28.46" y1="24.13" x2="28.46" y2="26.67" width="0" layer="19" extent="1-1"/>
 <wire x1="26.575" y1="23.7875" x2="28.46" y2="24.13" width="0" layer="19" extent="1-16"/>
 <wire x1="24.65" y1="24.13" x2="26.575" y2="23.7875" width="0" layer="19" extent="1-16"/>
@@ @@ -1704,24 +1700,17 @@ Please make sure your boards conform to @@
 </signal>
 <signal name="RFOUT" class="2">
 <contactref element="M2" pad="RFOUT"/>
 <contactref element="X2" pad="1"/>
 <wire x1="16.51" y1="50.8" x2="16.51" y2="46.99" width="0.8128" layer="16"/>
 <wire x1="16.51" y1="46.99" x2="13.97" y2="44.45" width="0.8128" layer="16"/>
 <wire x1="13.97" y1="44.45" x2="4.445" y2="44.45" width="0.8128" layer="16"/>
 <contactref element="X1" pad="1"/>
 <wire x1="2.1154" y1="42.545" x2="9.2075" y2="42.545" width="0.8128" layer="1"/>
 <wire x1="9.2075" y1="42.545" x2="16.51" y2="49.8475" width="0.8128" layer="1"/>
 <wire x1="16.51" y1="49.8475" x2="16.51" y2="50.8" width="0.8128" layer="1"/>
 </signal>
 <signal name="HX1_EN">
 <contactref element="IC2" pad="2"/>
 <contactref element="R18" pad="1"/>
 <via x="44.7675" y="52.07" extent="1-16" drill="0.254"/>
 <wire x1="46.0375" y1="51.65" x2="44.7675" y2="52.07" width="0.4064" layer="1"/>
 <via x="47.3075" y="52.07" extent="1-16" drill="0.254"/>
 <via x="34.29" y="49.2125" extent="1-16" drill="0.254"/>
 <wire x1="34.29" y1="44.43" x2="34.29" y2="49.2125" width="0.4064" layer="1"/>
 <wire x1="44.7675" y1="52.07" x2="33.3375" y2="52.07" width="0.4064" layer="16"/>
 <wire x1="33.3375" y1="52.07" x2="33.02" y2="51.7525" width="0.4064" layer="16"/>
 <wire x1="33.02" y1="51.7525" x2="33.02" y2="49.8475" width="0.4064" layer="16"/>
 <wire x1="33.02" y1="49.8475" x2="33.3375" y2="49.53" width="0.4064" layer="16"/>
 <wire x1="33.3375" y1="49.53" x2="33.9725" y2="49.53" width="0.4064" layer="16"/>
 <wire x1="33.9725" y1="49.53" x2="34.29" y2="49.2125" width="0.4064" layer="16"/>
 <wire x1="34.29" y1="44.43" x2="34.29" y2="42.545" width="0.4064" layer="1"/>
 <via x="34.29" y="42.545" extent="1-16" drill="0.254"/>
 <wire x1="34.29" y1="42.545" x2="34.29" y2="40.9575" width="0.4064" layer="16"/>
@@ @@ -1731,6 +1720,13 @@ Please make sure your boards conform to @@
 <contactref element="IC1" pad="32"/>
 <wire x1="33.63" y1="22.31" x2="33.63" y2="30.505" width="0.4064" layer="1"/>
 <wire x1="33.63" y1="30.505" x2="32.7025" y2="31.4325" width="0.4064" layer="1"/>
 <wire x1="34.29" y1="49.2125" x2="35.2425" y2="49.2125" width="0.4064" layer="16"/>
 <wire x1="35.2425" y1="49.2125" x2="35.56" y2="49.53" width="0.4064" layer="16"/>
 <wire x1="35.56" y1="49.53" x2="35.56" y2="51.7525" width="0.4064" layer="16"/>
 <wire x1="35.56" y1="51.7525" x2="35.8775" y2="52.07" width="0.4064" layer="16"/>
 <wire x1="35.8775" y1="52.07" x2="47.3075" y2="52.07" width="0.4064" layer="16"/>
 <wire x1="46.0375" y1="51.65" x2="46.775" y2="51.65" width="0.4064" layer="1"/>
 <wire x1="46.775" y1="51.65" x2="47.3075" y2="52.07" width="0.4064" layer="1"/>
 </signal>
 <signal name="3.3V">
 <contactref element="C8" pad="1"/>
@@ @@ -1782,8 +1778,6 @@ Please make sure your boards conform to @@
 <contactref element="R6" pad="2"/>
 <contactref element="R5" pad="2"/>
 <wire x1="14.59" y1="8.89" x2="13.97" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="16.39" y1="10.16" x2="15.86" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="15.86" y1="10.16" x2="14.59" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="9.845" y1="8.225" x2="9.845" y2="7.935" width="0.4064" layer="1"/>
 <wire x1="9.845" y1="7.935" x2="11.43" y2="6.35" width="0.4064" layer="1"/>
 <wire x1="11.43" y1="6.35" x2="12.7" y2="6.35" width="0.4064" layer="1"/>
@@ @@ -1887,6 +1881,9 @@ Please make sure your boards conform to @@
 <wire x1="48.045" y1="15.3425" x2="47.9425" y2="15.24" width="0.4064" layer="1"/>
 <wire x1="46.355" y1="15.3425" x2="47.84" y2="15.3425" width="0.4064" layer="1"/>
 <wire x1="47.84" y1="15.3425" x2="47.9425" y2="15.24" width="0.4064" layer="1"/>
 <wire x1="14.59" y1="8.89" x2="14.59" y2="9.1925" width="0.4064" layer="1"/>
 <wire x1="14.59" y1="9.1925" x2="15.5575" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="15.5575" y1="10.16" x2="16.39" y2="10.16" width="0.4064" layer="1"/>
 </signal>
 <signal name="HX1_EN_5V">
 <contactref element="M2" pad="EN"/>
@@ @@ -1939,11 +1936,13 @@ Please make sure your boards conform to @@
 <vertex x="47.3075" y="42.8625"/>
 <vertex x="45.72" y="42.8625"/>
 </polygon>
 <wire x1="46.0375" y1="44.1325" x2="43.4975" y2="44.1325" width="0.8128" layer="16"/>
 <wire x1="43.4975" y1="44.1325" x2="36.83" y2="50.8" width="0.8128" layer="16"/>
 <wire x1="46.0375" y1="44.1325" x2="40.3225" y2="44.1325" width="0.8128" layer="16"/>
 <wire x1="40.3225" y1="44.1325" x2="36.83" y2="47.625" width="0.8128" layer="16"/>
 <wire x1="36.83" y1="47.625" x2="36.83" y2="48.26" width="0.8128" layer="16"/>
 <via x="22.5425" y="33.02" extent="1-16" drill="0.254"/>
 <via x="23.495" y="33.02" extent="1-16" drill="0.254"/>
 <via x="24.4475" y="33.02" extent="1-16" drill="0.254"/>
 <wire x1="36.83" y1="48.26" x2="36.83" y2="50.8" width="0.8128" layer="16"/>
 <wire x1="24.4475" y1="33.02" x2="44.45" y2="33.02" width="0.8128" layer="16"/>
 <wire x1="44.45" y1="33.02" x2="46.99" y2="35.56" width="0.8128" layer="16"/>
 <wire x1="46.99" y1="35.56" x2="46.99" y2="43.18" width="0.8128" layer="16"/>
@@ @@ -1957,8 +1956,7 @@ Please make sure your boards conform to @@
 <via x="33.3375" y="48.26" extent="1-16" drill="0.254"/>
 <wire x1="33.34" y1="47.02" x2="33.3375" y2="47.0225" width="0.4064" layer="1"/>
 <wire x1="33.3375" y1="47.0225" x2="33.3375" y2="48.26" width="0.4064" layer="1"/>
 <wire x1="33.3375" y1="48.26" x2="34.29" y2="48.26" width="0.4064" layer="16"/>
 <wire x1="34.29" y1="48.26" x2="36.83" y2="50.8" width="0.4064" layer="16"/>
 <wire x1="33.3375" y1="48.26" x2="36.83" y2="48.26" width="0.4064" layer="16"/>
 </signal>
 <signal name="HX1_TX_5V">
 <contactref element="M2" pad="TXD"/>
@@ @@ -2006,10 +2004,10 @@ Please make sure your boards conform to @@
 <signal name="BUZZ">
 <contactref element="IC1" pad="30"/>
 <contactref element="R22" pad="1"/>
-<via x="27.94" y="43.18" extent="1-16" drill="0.254"/>
+<via x="28.2575" y="42.8625" extent="1-16" drill="0.254"/>
 <wire x1="26.67" y1="43.6" x2="27.52" y2="43.6" width="0.4064" layer="1"/>
 <wire x1="27.52" y1="43.6" x2="27.94" y2="43.18" width="0.4064" layer="1"/>
 <wire x1="27.94" y1="43.18" x2="33.655" y2="37.465" width="0.4064" layer="16"/>
 <wire x1="27.52" y1="43.6" x2="28.2575" y2="42.8625" width="0.4064" layer="1"/>
 <wire x1="28.2575" y1="42.8625" x2="33.655" y2="37.465" width="0.4064" layer="16"/>
 <via x="33.655" y="37.465" extent="1-16" drill="0.254"/>
 <wire x1="33.655" y1="37.465" x2="33.655" y2="31.4325" width="0.4064" layer="1"/>
 <wire x1="33.655" y1="31.4325" x2="34.29" y2="30.7975" width="0.4064" layer="1"/>
@@ @@ -2087,12 +2085,6 @@ Please make sure your boards conform to @@
 <vertex x="23.495" y="41.5925"/>
 </polygon>
 <via x="25.0825" y="43.18" extent="1-16" drill="0.254"/>
 <wire x1="30.71" y1="48.875" x2="30.71" y2="50.57" width="0.8128" layer="16"/>
 <wire x1="30.71" y1="50.57" x2="29.21" y2="52.07" width="0.8128" layer="16"/>
 <wire x1="29.21" y1="52.07" x2="27.94" y2="52.07" width="0.8128" layer="16"/>
 <wire x1="27.94" y1="52.07" x2="26.67" y2="50.8" width="0.8128" layer="16"/>
 <wire x1="26.67" y1="50.8" x2="26.67" y2="44.7675" width="0.8128" layer="16"/>
 <wire x1="26.67" y1="44.7675" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="25.4" y1="41.91" x2="33.3375" y2="41.91" width="0.8128" layer="1"/>
 <wire x1="33.3375" y1="41.91" x2="34.6075" y2="40.64" width="0.8128" layer="1"/>
 <wire x1="34.6075" y1="40.64" x2="34.6075" y2="36.83" width="0.8128" layer="1"/>
@@ @@ -2111,6 +2103,14 @@ Please make sure your boards conform to @@
 <wire x1="15.7075" y1="40.37" x2="15.5575" y2="40.22" width="0.8128" layer="1"/>
 <wire x1="23.8125" y1="41.91" x2="18.6875" y2="41.91" width="0.8128" layer="1"/>
 <wire x1="18.6875" y1="41.91" x2="17.1475" y2="40.37" width="0.8128" layer="1"/>
 <wire x1="30.71" y1="48.875" x2="30.71" y2="47.22" width="0.8128" layer="16"/>
 <wire x1="30.71" y1="47.22" x2="26.67" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="26.67" y1="43.18" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="25.0825" y1="43.18" x2="25.0825" y2="41.91" width="0.8128" layer="16"/>
 <wire x1="25.0825" y1="41.91" x2="23.8125" y2="41.91" width="0.8128" layer="16"/>
 <wire x1="25.0825" y1="43.18" x2="23.8125" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="23.8125" y1="43.18" x2="23.8125" y2="41.91" width="0.8128" layer="16"/>
 <wire x1="23.8125" y1="41.91" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 </signal>
 <signal name="N$4">
 <contactref element="5V_SWITCHING" pad="3"/>
@@ @@ -2149,23 +2149,27 @@ Please make sure your boards conform to @@
 <contactref element="U3" pad="8"/>
 <contactref element="R23" pad="1"/>
 <wire x1="6.475" y1="24.7" x2="6.475" y2="26.6925" width="0.4064" layer="1"/>
-<wire x1="6.475" y1="26.6925" x2="6.135" y2="26.9875" width="0.4064" layer="1"/>
+<wire x1="6.475" y1="26.6925" x2="6.4525" y2="26.67" width="0.4064" layer="1"/>
 <wire x1="6.475" y1="24.7" x2="7.575" y2="24.7" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$30">
 <contactref element="L5" pad="2"/>
 <contactref element="R23" pad="2"/>
 <wire x1="7.635" y1="28.575" x2="7.635" y2="27.1875" width="0.4064" layer="1"/>
 <wire x1="7.635" y1="27.1875" x2="7.835" y2="26.9875" width="0.4064" layer="1"/>
 <wire x1="8.11125" y1="28.2575" x2="8.11125" y2="27.02875" width="0.4064" layer="1"/>
 <wire x1="8.11125" y1="27.02875" x2="8.1525" y2="26.67" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$31">
 <contactref element="U3" pad="11"/>
 <contactref element="L5" pad="1"/>
 <contactref element="X5" pad="1"/>
 <wire x1="4.445" y1="33.655" x2="4.445" y2="28.575" width="0.4064" layer="1"/>
 <wire x1="4.445" y1="28.575" x2="4.445" y2="24.87" width="0.4064" layer="1"/>
 <wire x1="4.445" y1="24.87" x2="4.275" y2="24.7" width="0.4064" layer="1"/>
 <wire x1="6.335" y1="28.575" x2="4.445" y2="28.575" width="0.4064" layer="1"/>
 <contactref element="X3" pad="1"/>
 <wire x1="2.1154" y1="32.385" x2="5.08" y2="32.385" width="0.6096" layer="1"/>
 <wire x1="5.08" y1="32.385" x2="6.0325" y2="31.4325" width="0.6096" layer="1"/>
 <wire x1="6.0325" y1="31.4325" x2="6.0325" y2="28.2575" width="0.6096" layer="1"/>
 <wire x1="4.28625" y1="24.765" x2="4.28625" y2="26.51125" width="0.6096" layer="1"/>
 <wire x1="4.28625" y1="26.51125" x2="6.0325" y2="28.2575" width="0.6096" layer="1"/>
 <wire x1="6.0325" y1="28.2575" x2="6.81125" y2="28.2575" width="0.6096" layer="1"/>
 <wire x1="4.28625" y1="24.765" x2="4.275" y2="24.7" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="UBX_SCL">
 <contactref element="U3" pad="19"/>
@@ @@ -2185,10 +2189,6 @@ Please make sure your boards conform to @@
 <contactref element="U3" pad="22"/>
 <contactref element="R3" pad="1"/>
 <contactref element="D2" pad="1"/>
 <wire x1="14.09" y1="10.16" x2="14.9225" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="14.9225" y1="10.16" x2="15.24" y2="10.4775" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="10.4775" x2="15.24" y2="12.635" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="12.635" x2="14.975" y2="12.9" width="0.4064" layer="1"/>
 <via x="13.0175" y="10.16" extent="1-16" drill="0.2286"/>
 <wire x1="14.09" y1="10.16" x2="13.0175" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="9.74" x2="18.9475" y2="9.74" width="0.4064" layer="1"/>
@@ @@ -2198,14 +2198,16 @@ Please make sure your boards conform to @@
 <via x="19.05" y="11.1125" extent="1-16" drill="0.254"/>
 <wire x1="19.05" y1="11.1125" x2="13.97" y2="11.1125" width="0.4064" layer="16"/>
 <wire x1="13.97" y1="11.1125" x2="13.0175" y2="10.16" width="0.4064" layer="16"/>
 <wire x1="14.975" y1="12.9" x2="14.975" y2="11.045" width="0.4064" layer="1"/>
 <wire x1="14.975" y1="11.045" x2="14.09" y2="10.16" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$32">
 <contactref element="U$7" pad="V+"/>
 <contactref element="R3" pad="2"/>
 <wire x1="2.55" y1="8.14" x2="2.55" y2="7.2925" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="8.04" x2="19.05" y2="7.62" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="7.62" x2="17.145" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="5.715" x2="4.445" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="8.04" x2="19.05" y2="6.35" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="6.35" x2="18.415" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="18.415" y1="5.715" x2="4.445" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="4.445" y1="5.715" x2="2.55" y2="7.2925" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$10">
@@ @@ -2272,11 +2274,11 @@ Please make sure your boards conform to @@
 <wire x1="8.89" y1="36.9325" x2="8.89" y2="32.385" width="0.4064" layer="1"/>
 <wire x1="8.89" y1="32.385" x2="9.525" y2="31.75" width="0.4064" layer="1"/>
 <via x="9.525" y="31.75" extent="1-16" drill="0.254"/>
 <wire x1="9.525" y1="31.75" x2="25.0825" y2="31.75" width="0.4064" layer="16"/>
 <wire x1="25.0825" y1="31.75" x2="26.3525" y2="30.48" width="0.4064" layer="16"/>
 <wire x1="26.3525" y1="30.48" x2="32.7025" y2="30.48" width="0.4064" layer="16"/>
 <wire x1="32.7025" y1="30.48" x2="34.29" y2="28.8925" width="0.4064" layer="16"/>
 <wire x1="34.29" y1="28.8925" x2="34.29" y2="23.8125" width="0.4064" layer="16"/>
 <wire x1="9.525" y1="31.75" x2="9.525" y2="28.8925" width="0.4064" layer="16"/>
 <wire x1="9.525" y1="28.8925" x2="10.16" y2="28.2575" width="0.4064" layer="16"/>
 <wire x1="10.16" y1="28.2575" x2="26.035" y2="28.2575" width="0.4064" layer="16"/>
 <wire x1="26.035" y1="28.2575" x2="30.48" y2="23.8125" width="0.4064" layer="16"/>
 <wire x1="30.48" y1="23.8125" x2="34.29" y2="23.8125" width="0.4064" layer="16"/>
 </signal>
 <signal name="N$36">
 <contactref element="Q9" pad="C"/>
@@ @@ -2293,10 +2295,12 @@ Please make sure your boards conform to @@
 <signal name="N$38">
 <contactref element="Q9" pad="B"/>
 <contactref element="10K" pad="1"/>
 <wire x1="13.9675" y1="40.47" x2="12.5275" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="12.5275" y1="41.91" x2="11.43" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="11.43" y1="41.91" x2="10.4775" y2="40.9575" width="0.4064" layer="1"/>
 <wire x1="10.4775" y1="40.9575" x2="10.4775" y2="40.22" width="0.4064" layer="1"/>
 <wire x1="10.4775" y1="40.22" x2="10.4775" y2="41.5925" width="0.4064" layer="1"/>
 <wire x1="10.4775" y1="41.5925" x2="10.795" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="41.91" x2="13.6525" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="13.6525" y1="41.91" x2="13.97" y2="41.5925" width="0.4064" layer="1"/>
 <wire x1="13.97" y1="41.5925" x2="13.97" y2="40.4725" width="0.4064" layer="1"/>
 <wire x1="13.97" y1="40.4725" x2="13.9675" y2="40.47" width="0.4064" layer="1"/>
 </signal>
 <signal name="ASSOCLED">
 <contactref element="U$2" pad="15"/>
@@ @@ -2319,9 +2323,9 @@ Please make sure your boards conform to @@
 <contactref element="L1" pad="1"/>
 <wire x1="16.09" y1="7.3025" x2="15.89" y2="7.3025" width="0.4064" layer="1"/>
 <wire x1="15.89" y1="7.3025" x2="15.89" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="15.89" y1="8.89" x2="17.145" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="8.89" x2="18.0975" y2="9.8425" width="0.4064" layer="1"/>
 <wire x1="18.0975" y1="9.8425" x2="18.0975" y2="10.795" width="0.4064" layer="1"/>
 <wire x1="15.89" y1="8.89" x2="17.78" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="17.78" y1="8.89" x2="18.0975" y2="9.2075" width="0.4064" layer="1"/>
 <wire x1="18.0975" y1="9.2075" x2="18.0975" y2="10.795" width="0.4064" layer="1"/>
 <wire x1="16.075" y1="12.9" x2="16.075" y2="11.5475" width="0.4064" layer="1"/>
 <wire x1="16.075" y1="11.5475" x2="16.51" y2="11.1125" width="0.4064" layer="1"/>
 <wire x1="16.51" y1="11.1125" x2="17.78" y2="11.1125" width="0.4064" layer="1"/>

master/master.sch

➞

Show inline comments

@@ @@ -3186,44 +3186,311 @@ Source: http://www.atmel.com/dyn/resourc @@
 </library>
 <library name="con-coax">
 <packages>
 <package name="BU-SMA-H">
 <description>FEMALE &lt;b&gt;SMA CONNECTOR&lt;/b&gt;&lt;p&gt;
 Radiall&lt;p&gt;</description>
 <wire x1="-1.1" y1="3.2" x2="1.1" y2="3.2" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="1.1" x2="3.2" y2="-1.1" width="0.2032" layer="21"/>
 <wire x1="1.1" y1="-3.2" x2="-1.1" y2="-3.2" width="0.2032" layer="21"/>
 <wire x1="-3.2" y1="-1.1" x2="-3.2" y2="1.1" width="0.2032" layer="21"/>
 <wire x1="-3.1999" y1="3.1999" x2="3.2" y2="3.2" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="3.2" x2="3.2" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="3.2" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="-2.9" x2="3.1999" y2="-3.1999" width="0.2032" layer="51"/>
 <wire x1="3.1999" y1="-3.1999" x2="-3.2" y2="-3.2" width="0.2032" layer="51"/>
 <wire x1="-3.2" y1="-3.2" x2="-3.1999" y2="3.1999" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="4.3" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="2.9" x2="8.6" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="3.4" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11.6" y1="-2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="3.4" x2="10.7" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="-2.9" x2="4.3" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="-2.9" x2="8.3" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.6" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="-3.4" x2="11" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11.6" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="-3.4" x2="10.7" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <package name="J502-ND">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; End Launch Jack Receptacle - Round Contact&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="-4.65" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-4.65" y1="-3.85" x2="-4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="-4.9" y1="-3.5" x2="-4.9" y2="-1.8" width="0" layer="46"/>
 <wire x1="-4.9" y1="-1.8" x2="-3.6" y2="-1.8" width="0" layer="46" curve="-180"/>
 <wire x1="-3.6" y1="-1.8" x2="-3.6" y2="-3.5" width="0" layer="46"/>
 <wire x1="-3.6" y1="-3.5" x2="-4.9" y2="-3.5" width="0" layer="46" curve="-180"/>
 <wire x1="3.6" y1="-3.5" x2="3.6" y2="-1.8" width="0" layer="46"/>
 <wire x1="3.6" y1="-1.8" x2="4.9" y2="-1.8" width="0" layer="46" curve="-180"/>
 <wire x1="4.9" y1="-1.8" x2="4.9" y2="-3.5" width="0" layer="46"/>
 <wire x1="4.9" y1="-3.5" x2="3.6" y2="-3.5" width="0" layer="46" curve="-180"/>
 <circle x="0" y="0" radius="3.1999" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.7" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="1.27"/>
 <pad name="2" x="-2.5499" y="2.5499" drill="1.778"/>
 <pad name="3" x="2.5499" y="2.5499" drill="1.778"/>
 <pad name="4" x="2.5499" y="-2.5499" drill="1.778"/>
 <pad name="5" x="-2.5499" y="-2.5499" drill="1.778"/>
 <pad name="1" x="0" y="0" drill="1"/>
 <pad name="2" x="-4.25" y="0.4" drill="1.5"/>
 <pad name="3" x="4.25" y="0.4" drill="1.5"/>
 <pad name="4" x="4.25" y="-2.65" drill="1.3" shape="long" rot="R90"/>
 <pad name="5" x="-4.25" y="-2.65" drill="1.3" shape="long" rot="R90"/>
 <text x="-2.54" y="4.445" size="1.27" layer="25">&gt;NAME</text>
 <text x="-3.175" y="-5.715" size="1.27" layer="27">&gt;VALUE</text>
 </package>
 <package name="J502-ND-142-0701-801/806">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0701-851/861">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0701-871/876">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0701-881/886">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.031&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="1.143" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0711-821/826">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="4.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.1" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="3.85" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.1154" y="0" dx="4.191" dy="1.778" layer="1"/>
 <smd name="G@1" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@2" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@4" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="16"/>
 <smd name="G@3" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0711-871/876">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.047&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="1.905" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0711-881/886">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.047&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="1.905" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="SMA-142-0701-871">
 <description>&lt;b&gt;SMA Connector&lt;/b&gt; HF-Steckverbinder PC END BLKHD JCK GLD .062" BOARDS&lt;p&gt;
 Hersteller: Emerson / Johnson&lt;br&gt;
 Source: &lt;a href="http://emersonconnectivity.com/OA_MEDIA/drawings/dr-1420701871.pdf"&gt; Data sheet&lt;a&gt;</description>
 <wire x1="-4.65" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="4.65" y1="4.65" x2="4.65" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-4.65" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="-4.65" y1="-4.65" x2="-4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-4.65" y1="1.7" x2="-4.65" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="4.65" y1="4.65" x2="4.65" y2="1.7" width="0.2032" layer="21"/>
 <wire x1="2.745" y1="-4.65" x2="-2.745" y2="-4.65" width="0.2032" layer="21"/>
 <circle x="0" y="0" radius="3.2378" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.4199" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="0.762" diameter="1.524"/>
 <pad name="2@1" x="-4.2545" y="0" drill="1.524" diameter="2.54"/>
 <pad name="2@2" x="4.2545" y="0" drill="1.524" diameter="2.54"/>
 <pad name="2@3" x="-4.2545" y="-3.1496" drill="2.159" diameter="2.794"/>
 <pad name="2@4" x="4.2545" y="-3.1496" drill="2.159" diameter="2.794"/>
 <text x="-5.08" y="5.08" size="1.27" layer="25">&gt;NAME</text>
 <text x="-5.08" y="-6.35" size="1.27" layer="27">&gt;VALUE</text>
 <rectangle x1="-4.775" y1="-0.5" x2="-3.75" y2="0.5" layer="51"/>
 <rectangle x1="-4.775" y1="-3.2432" x2="-3.75" y2="-2.2432" layer="51"/>
 <rectangle x1="-4.775" y1="-4.0814" x2="-3.75" y2="-3.0814" layer="51"/>
 <rectangle x1="3.75" y1="-0.5" x2="4.775" y2="0.5" layer="51" rot="R180"/>
 <rectangle x1="3.75" y1="-3.2432" x2="4.775" y2="-2.2432" layer="51" rot="R180"/>
 <rectangle x1="3.75" y1="-4.0814" x2="4.775" y2="-3.0814" layer="51" rot="R180"/>
 </package>
 </packages>
 <symbols>
 <symbol name="BNC-FGND">
@@ @@ -3240,29 +3507,31 @@ Radiall<p></description> @@
 <pin name="1" x="2.54" y="0" visible="off" length="short" direction="pas" rot="R180"/>
 <pin name="GND" x="2.54" y="-2.54" visible="off" length="short" direction="pwr" rot="R180"/>
 </symbol>
 <symbol name="GND">
 <text x="-1.524" y="1.778" size="1.778" layer="95">&gt;NAME</text>
 <pin name="GND" x="-2.54" y="0" length="short" direction="pwr"/>
 <symbol name="3GND">
 <wire x1="0" y1="0" x2="0" y2="-5.08" width="0.1524" layer="94"/>
 <text x="0" y="-7.62" size="1.778" layer="95">&gt;NAME</text>
 <pin name="GND@1" x="2.54" y="0" visible="off" length="short" direction="pwr" rot="R180"/>
 <pin name="GND@2" x="2.54" y="-2.54" visible="off" length="short" direction="pwr" rot="R180"/>
 <pin name="GND@3" x="2.54" y="-5.08" visible="off" length="short" direction="pwr" rot="R180"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="BU-SMA-H" prefix="X">
 <description>FEMALE &lt;b&gt;SMA CONNECTOR&lt;/b&gt;&lt;p&gt;
 Radiall&lt;p&gt;</description>
 <deviceset name="SMA-" prefix="X">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; End Launch Jack Receptacle - Round Contact&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <gates>
 <gate name="G$1" symbol="BNC-FGND" x="0" y="0"/>
 <gate name="G2" symbol="GND" x="22.86" y="2.54" addlevel="request"/>
 <gate name="G3" symbol="GND" x="22.86" y="0" addlevel="request"/>
 <gate name="G4" symbol="GND" x="22.86" y="-2.54" addlevel="request"/>
 <gate name="G1" symbol="BNC-FGND" x="0" y="0"/>
 <gate name="G" symbol="3GND" x="0" y="-5.08" addlevel="request"/>
 </gates>
 <devices>
-<device name="" package="BU-SMA-H">
+<device name="J502-ND" package="J502-ND">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="GND" pad="2"/>
 <connect gate="G2" pin="GND" pad="4"/>
 <connect gate="G3" pin="GND" pad="3"/>
 <connect gate="G4" pin="GND" pad="5"/>
 <connect gate="G" pin="GND@1" pad="3"/>
 <connect gate="G" pin="GND@2" pad="4"/>
 <connect gate="G" pin="GND@3" pad="5"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="2"/>
 </connects>
 <technologies>
 <technology name="">
@@ @@ -3273,6 +3542,142 @@ Radiall<p></description> @@
 </technology>
 </technologies>
 </device>
 <device name="142-0701-801/806" package="J502-ND-142-0701-801/806">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-801" constant="no"/>
 <attribute name="OC_FARNELL" value="1608592" constant="no"/>
 <attribute name="OC_NEWARK" value="90F2624" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-851/861" package="J502-ND-142-0701-851/861">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-851" constant="no"/>
 <attribute name="OC_FARNELL" value="1019325" constant="no"/>
 <attribute name="OC_NEWARK" value="99F6798" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-871/876" package="J502-ND-142-0701-871/876">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-871" constant="no"/>
 <attribute name="OC_FARNELL" value="1339835" constant="no"/>
 <attribute name="OC_NEWARK" value="91B6105" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-881/886" package="J502-ND-142-0701-881/886">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-881" constant="no"/>
 <attribute name="OC_FARNELL" value="1608603" constant="no"/>
 <attribute name="OC_NEWARK" value="08B906" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0711-821/826" package="J502-ND-142-0711-821/826">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0711-821" constant="no"/>
 <attribute name="OC_FARNELL" value="1019328" constant="no"/>
 <attribute name="OC_NEWARK" value="16F3627" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0711-871/876" package="J502-ND-142-0711-871/876">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0711-871" constant="no"/>
 <attribute name="OC_FARNELL" value="unknown" constant="no"/>
 <attribute name="OC_NEWARK" value="01C1639" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0711-881/886" package="J502-ND-142-0711-881/886">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0711-881" constant="no"/>
 <attribute name="OC_FARNELL" value="unknown" constant="no"/>
 <attribute name="OC_NEWARK" value="50B4464" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-871/880" package="SMA-142-0701-871">
 <connects>
 <connect gate="G" pin="GND@1" pad="2@2"/>
 <connect gate="G" pin="GND@2" pad="2@3"/>
 <connect gate="G" pin="GND@3" pad="2@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="2@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-871" constant="no"/>
 <attribute name="OC_FARNELL" value="1339835" constant="no"/>
 <attribute name="OC_NEWARK" value="91B6105" constant="no"/>
 </technology>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
@@ @@ -5397,12 +5802,12 @@ There are 2 variants that must be carefu @@
 <variantdefs>
 </variantdefs>
 <classes>
-<class number="0" name="default" width="0.2032" drill="0.3048">
 <class number="0" name="default" width="0.2032" drill="0">
 <clearance class="0" value="0.2032"/>
 </class>
 <class number="1" name="power" width="0.508" drill="0">
 </class>
-<class number="2" name="20" width="0.508" drill="0">
+<class number="2" name="whatisthis" width="0.508" drill="0">
 </class>
 </classes>
 <parts>
@@ @@ -5501,13 +5906,6 @@ There are 2 variants that must be carefu @@
 <part name="P+12" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="D2" library="SparkFun" deviceset="DIODE" device="SOD" value="SCHOTTKEY"/>
 <part name="R3" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="220R"/>
 <part name="X5" library="con-coax" deviceset="BU-SMA-H" device=""/>
 <part name="X2" library="con-coax" deviceset="BU-SMA-H" device="">
 <attribute name="MF" value=""/>
 <attribute name="MPN" value=""/>
 <attribute name="OC_FARNELL" value="unknown"/>
 <attribute name="OC_NEWARK" value="unknown"/>
 </part>
 <part name="U$11" library="SparkFun" deviceset="5V" device=""/>
 <part name="AUX0" library="adafruit" deviceset="LED" device="CHIPLED_0603" value="ORANGE"/>
 <part name="GND32" library="supply1" deviceset="GND" device=""/>
@@ @@ -5548,6 +5946,8 @@ There are 2 variants that must be carefu @@
 <part name="GND43" library="supply1" deviceset="GND" device=""/>
 <part name="GND42" library="supply1" deviceset="GND" device=""/>
 <part name="R12" library="SparkFun" deviceset="RESISTOR-ARRAY" device="0603-ARV" value="4.7k"/>
 <part name="X1" library="con-coax" deviceset="SMA-" device="142-0711-821/826"/>
 <part name="X3" library="con-coax" deviceset="SMA-" device="142-0711-821/826"/>
 </parts>
 <sheets>
 <sheet>
@@ @@ -5769,8 +6169,6 @@ Maybe use bigger R's</text> @@
 <attribute name="VALUE" x="93.98" y="233.9086" size="1.778" layer="96"/>
 </instance>
 <instance part="R3" gate="G$1" x="111.76" y="220.98" rot="R270"/>
 <instance part="X5" gate="G$1" x="20.32" y="139.7"/>
 <instance part="X2" gate="G$1" x="142.24" y="236.22"/>
 <instance part="U$11" gate="G$1" x="132.08" y="96.52"/>
 <instance part="AUX0" gate="G$1" x="254" y="223.52" smashed="yes">
 <attribute name="NAME" x="252.476" y="224.028" size="1.778" layer="95" rot="R90"/>
@@ @@ -5839,6 +6237,8 @@ Maybe use bigger R's</text> @@
 <instance part="R12" gate="B" x="50.8" y="104.14"/>
 <instance part="R12" gate="C" x="71.12" y="99.06"/>
 <instance part="R12" gate="D" x="60.96" y="101.6"/>
 <instance part="X1" gate="G1" x="142.24" y="236.22"/>
 <instance part="X3" gate="G1" x="20.32" y="139.7"/>
 </instances>
 <busses>
 </busses>
@@ @@ -5882,7 +6282,7 @@ Maybe use bigger R's</text> @@
 <pinref part="M2" gate="G$1" pin="RFGND2"/>
 <pinref part="M2" gate="G$1" pin="RFGND1"/>
 <pinref part="GND19" gate="1" pin="GND"/>
-<pinref part="X2" gate="G$1" pin="GND"/>
+<pinref part="X1" gate="G1" pin="GND"/>
 </segment>
 <segment>
 <wire x1="190.5" y1="228.6" x2="193.04" y2="228.6" width="0.1524" layer="91"/>
@@ @@ -6054,7 +6454,7 @@ Maybe use bigger R's</text> @@
 <pinref part="U3" gate="G$1" pin="GND2"/>
 <junction x="58.42" y="137.16"/>
 <wire x1="22.86" y1="137.16" x2="58.42" y2="137.16" width="0.1524" layer="91"/>
-<pinref part="X5" gate="G$1" pin="GND"/>
+<pinref part="X3" gate="G1" pin="GND"/>
 </segment>
 <segment>
 <wire x1="96.52" y1="137.16" x2="91.44" y2="137.16" width="0.1524" layer="91"/>
@@ @@ -6416,7 +6816,7 @@ Maybe use bigger R's</text> @@
 <segment>
 <wire x1="165.1" y1="236.22" x2="144.78" y2="236.22" width="0.1524" layer="91"/>
 <pinref part="M2" gate="G$1" pin="RFOUT"/>
-<pinref part="X2" gate="G$1" pin="1"/>
+<pinref part="X1" gate="G1" pin="1"/>
 </segment>
 </net>
 <net name="HX1_EN" class="0">
@@ @@ -6865,7 +7265,7 @@ Maybe use bigger R's</text> @@
 <wire x1="25.4" y1="144.78" x2="27.94" y2="144.78" width="0.1524" layer="91"/>
 <wire x1="22.86" y1="139.7" x2="25.4" y2="139.7" width="0.1524" layer="91"/>
 <junction x="25.4" y="139.7"/>
-<pinref part="X5" gate="G$1" pin="1"/>
+<pinref part="X3" gate="G1" pin="1"/>
 </segment>
 </net>
 <net name="UBX_SCL" class="0">

slave-daughter/slave-daughter-camera.brd

➞

Show inline comments

@@ @@ -20,8 +20,8 @@ @@
 <layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
 <layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
@@ @@ -222,6 +222,22 @@ We've spent an enormous amount of time c @@
 <rectangle x1="20.066" y1="-0.254" x2="20.574" y2="0.254" layer="51"/>
 <rectangle x1="22.606" y1="-0.254" x2="23.114" y2="0.254" layer="51"/>
 </package>
 <package name="0603-RES">
 <wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
 <wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
 <smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
 <text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
 <rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
 <rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 <rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/>
 </package>
 </packages>
 </library>
 <library name="SLAT-CON-JST-ZH">
@@ @@ -247,6 +263,34 @@ We've spent an enormous amount of time c @@
 </package>
 </packages>
 </library>
 <library name="adafruit">
 <packages>
 <package name="CHIPLED_0603">
 <description>&lt;b&gt;CHIPLED&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf</description>
 <wire x1="-0.3" y1="0.825" x2="0.3" y2="0.825" width="0.1016" layer="51" curve="180" cap="flat"/>
 <wire x1="-0.275" y1="-0.825" x2="0.275" y2="-0.825" width="0.0508" layer="51" curve="-180" cap="flat"/>
 <wire x1="-0.4" y1="0.375" x2="-0.4" y2="-0.35" width="0.1016" layer="51"/>
 <wire x1="0.4" y1="0.35" x2="0.4" y2="-0.35" width="0.1016" layer="51"/>
 <circle x="-0.35" y="0.625" radius="0.075" width="0.0508" layer="51"/>
 <smd name="C" x="0" y="0.75" dx="0.8" dy="0.8" layer="1"/>
 <smd name="A" x="0" y="-0.75" dx="0.8" dy="0.8" layer="1"/>
 <text x="-0.635" y="-1.27" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="1.905" y="-1.27" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.45" y1="0.7" x2="-0.25" y2="0.85" layer="51"/>
 <rectangle x1="-0.275" y1="0.55" x2="-0.225" y2="0.6" layer="51"/>
 <rectangle x1="-0.45" y1="0.35" x2="-0.4" y2="0.725" layer="51"/>
 <rectangle x1="0.25" y1="0.55" x2="0.45" y2="0.85" layer="51"/>
 <rectangle x1="-0.45" y1="0.35" x2="0.45" y2="0.575" layer="51"/>
 <rectangle x1="-0.45" y1="-0.85" x2="-0.25" y2="-0.35" layer="51"/>
 <rectangle x1="0.25" y1="-0.85" x2="0.45" y2="-0.35" layer="51"/>
 <rectangle x1="-0.275" y1="-0.575" x2="0.275" y2="-0.35" layer="51"/>
 <rectangle x1="-0.275" y1="-0.65" x2="-0.175" y2="-0.55" layer="51"/>
 <rectangle x1="0.175" y1="-0.65" x2="0.275" y2="-0.55" layer="51"/>
 <rectangle x1="-0.125" y1="0" x2="0.125" y2="0.25" layer="21"/>
 </package>
 </packages>
 </library>
 </libraries>
 <attributes>
 </attributes>
@@ @@ -438,6 +482,12 @@ design rules under a new name.</descript @@
 <element name="J1" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="30.8102" y="11.938" rot="R270"/>
 <element name="J2" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="30.861" y="20.447" rot="R270"/>
 <element name="J3" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="30.861" y="28.829" rot="R270"/>
 <element name="LED1" library="adafruit" package="CHIPLED_0603" value="GREEN" x="25.781" y="11.303" rot="R180"/>
 <element name="R1" library="SparkFun" package="0603-RES" value="10K" x="27.686" y="11.303" rot="R270"/>
 <element name="LED2" library="adafruit" package="CHIPLED_0603" value="VIOLET" x="25.781" y="19.812" rot="R180"/>
 <element name="R2" library="SparkFun" package="0603-RES" value="10K" x="27.686" y="19.812" rot="R270"/>
 <element name="LED3" library="adafruit" package="CHIPLED_0603" value="RED" x="25.781" y="28.067" rot="R180"/>
 <element name="R3" library="SparkFun" package="0603-RES" value="10K" x="27.686" y="28.067" rot="R270"/>
 </elements>
 <signals>
 <signal name="GND">
@@ @@ -445,26 +495,21 @@ design rules under a new name.</descript @@
 <contactref element="J1" pad="2"/>
 <contactref element="J2" pad="2"/>
 <contactref element="J3" pad="2"/>
 <wire x1="5.08" y1="2.667" x2="5.207" y2="2.667" width="0.4064" layer="1"/>
 <wire x1="5.207" y1="2.667" x2="14.605" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="14.605" y1="12.065" x2="21.844" y2="12.065" width="0.4064" layer="1"/>
 <via x="21.844" y="12.065" extent="1-16" drill="0.254"/>
 <wire x1="21.844" y1="12.065" x2="26.289" y2="12.065" width="0.4064" layer="16"/>
 <via x="26.289" y="12.065" extent="1-16" drill="0.254"/>
 <wire x1="26.289" y1="12.065" x2="30.6632" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="30.6632" y1="12.065" x2="30.7902" y2="11.938" width="0.4064" layer="1"/>
 <wire x1="30.7902" y1="11.938" x2="30.7902" y2="14.2948" width="0.4064" layer="1"/>
 <wire x1="30.7902" y1="14.2948" x2="27.813" y2="17.272" width="0.4064" layer="1"/>
 <via x="27.813" y="17.272" extent="1-16" drill="0.254"/>
 <wire x1="27.813" y1="17.272" x2="27.813" y2="20.447" width="0.4064" layer="16"/>
 <via x="27.813" y="20.447" extent="1-16" drill="0.254"/>
 <wire x1="27.813" y1="20.447" x2="30.841" y2="20.447" width="0.4064" layer="1"/>
 <wire x1="30.841" y1="20.447" x2="30.841" y2="22.499" width="0.4064" layer="1"/>
 <wire x1="30.841" y1="22.499" x2="27.686" y2="25.654" width="0.4064" layer="1"/>
 <via x="27.686" y="25.654" extent="1-16" drill="0.254"/>
 <wire x1="27.686" y1="25.654" x2="27.686" y2="28.829" width="0.4064" layer="16"/>
 <via x="27.686" y="28.829" extent="1-16" drill="0.254"/>
 <wire x1="27.686" y1="28.829" x2="30.841" y2="28.829" width="0.4064" layer="1"/>
 <polygon width="0.4064" layer="16" isolate="0.254">
 <vertex x="-1.524" y="41.529"/>
 <vertex x="42.164" y="41.529"/>
 <vertex x="42.164" y="-2.921"/>
 <vertex x="-1.524" y="-2.921"/>
 </polygon>
 <polygon width="0.4064" layer="1" isolate="0.254">
 <vertex x="-1.905" y="42.672"/>
 <vertex x="44.196" y="42.672"/>
 <vertex x="44.196" y="-5.08"/>
 <vertex x="-1.905" y="-5.08"/>
 </polygon>
 <contactref element="LED1" pad="C"/>
 <contactref element="LED2" pad="C"/>
 <contactref element="LED3" pad="C"/>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
@@ @@ -502,29 +547,44 @@ design rules under a new name.</descript @@
 <signal name="PA0">
 <contactref element="JP2" pad="3"/>
 <contactref element="J1" pad="1"/>
 <wire x1="10.16" y1="36.957" x2="10.16" y2="36.83" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="36.83" x2="23.368" y2="23.622" width="0.4064" layer="1"/>
 <wire x1="23.368" y1="23.622" x2="23.368" y2="13.208" width="0.4064" layer="1"/>
 <wire x1="23.368" y1="13.208" x2="26.162" y2="10.414" width="0.4064" layer="1"/>
 <wire x1="26.162" y1="10.414" x2="30.7662" y2="10.414" width="0.4064" layer="1"/>
 <wire x1="30.7662" y1="10.414" x2="30.7902" y2="10.438" width="0.4064" layer="1"/>
 <contactref element="R1" pad="2"/>
 <wire x1="27.686" y1="10.453" x2="28.829" y2="10.453" width="0.4064" layer="1"/>
 <wire x1="28.829" y1="10.453" x2="30.7752" y2="10.453" width="0.4064" layer="1"/>
 <wire x1="30.7752" y1="10.453" x2="30.7902" y2="10.438" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="36.957" x2="10.16" y2="23.622" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="23.622" x2="25.4" y2="8.382" width="0.4064" layer="1"/>
 <wire x1="25.4" y1="8.382" x2="28.448" y2="8.382" width="0.4064" layer="1"/>
 <wire x1="28.448" y1="8.382" x2="28.829" y2="8.763" width="0.4064" layer="1"/>
 <wire x1="28.829" y1="8.763" x2="28.829" y2="10.453" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA1">
 <contactref element="JP2" pad="4"/>
 <contactref element="J2" pad="1"/>
 <wire x1="12.7" y1="36.703" x2="24.638" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="24.638" y1="24.765" x2="24.638" y2="19.685" width="0.4064" layer="1"/>
 <wire x1="24.638" y1="19.685" x2="25.4" y2="18.923" width="0.4064" layer="1"/>
 <wire x1="25.4" y1="18.923" x2="30.817" y2="18.923" width="0.4064" layer="1"/>
 <wire x1="30.817" y1="18.923" x2="30.841" y2="18.947" width="0.4064" layer="1"/>
 <contactref element="R2" pad="2"/>
 <wire x1="27.686" y1="18.962" x2="28.702" y2="18.962" width="0.4064" layer="1"/>
 <wire x1="28.702" y1="18.962" x2="30.826" y2="18.962" width="0.4064" layer="1"/>
 <wire x1="30.826" y1="18.962" x2="30.841" y2="18.947" width="0.4064" layer="1"/>
 <wire x1="12.7" y1="36.703" x2="12.7" y2="28.575" width="0.4064" layer="1"/>
 <wire x1="12.7" y1="28.575" x2="24.511" y2="16.764" width="0.4064" layer="1"/>
 <wire x1="24.511" y1="16.764" x2="28.194" y2="16.764" width="0.4064" layer="1"/>
 <wire x1="28.194" y1="16.764" x2="28.829" y2="17.399" width="0.4064" layer="1"/>
 <wire x1="28.829" y1="17.399" x2="28.829" y2="18.835" width="0.4064" layer="1"/>
 <wire x1="28.829" y1="18.835" x2="28.702" y2="18.962" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA2">
 <contactref element="JP2" pad="5"/>
 <contactref element="J3" pad="1"/>
 <wire x1="15.24" y1="36.957" x2="15.24" y2="36.83" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="36.83" x2="24.765" y2="27.305" width="0.4064" layer="1"/>
 <wire x1="24.765" y1="27.305" x2="30.817" y2="27.305" width="0.4064" layer="1"/>
 <wire x1="30.817" y1="27.305" x2="30.841" y2="27.329" width="0.4064" layer="1"/>
 <contactref element="R3" pad="2"/>
 <wire x1="27.686" y1="27.217" x2="28.829" y2="27.217" width="0.4064" layer="1"/>
 <wire x1="28.829" y1="27.217" x2="30.729" y2="27.217" width="0.4064" layer="1"/>
 <wire x1="30.729" y1="27.217" x2="30.841" y2="27.329" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="36.957" x2="15.24" y2="34.163" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="34.163" x2="24.638" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="24.638" y1="24.765" x2="28.194" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="28.194" y1="24.765" x2="28.829" y2="25.4" width="0.4064" layer="1"/>
 <wire x1="28.829" y1="25.4" x2="28.829" y2="27.217" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA3">
 <contactref element="JP2" pad="6"/>
@@ @@ -541,6 +601,32 @@ design rules under a new name.</descript @@
 <signal name="PA7">
 <contactref element="JP2" pad="10"/>
 </signal>
 <signal name="N$1">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="5.334" y="2.286"/>
 <vertex x="6.604" y="2.286"/>
 <vertex x="6.604" y="2.921"/>
 <vertex x="5.334" y="2.921"/>
 </polygon>
 </signal>
 <signal name="N$2">
 <contactref element="LED1" pad="A"/>
 <contactref element="R1" pad="1"/>
 <wire x1="27.686" y1="12.153" x2="25.881" y2="12.153" width="0.4064" layer="1"/>
 <wire x1="25.881" y1="12.153" x2="25.781" y2="12.053" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$4">
 <contactref element="LED2" pad="A"/>
 <contactref element="R2" pad="1"/>
 <wire x1="27.686" y1="20.662" x2="25.881" y2="20.662" width="0.4064" layer="1"/>
 <wire x1="25.881" y1="20.662" x2="25.781" y2="20.562" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$6">
 <contactref element="LED3" pad="A"/>
 <contactref element="R3" pad="1"/>
 <wire x1="27.686" y1="28.917" x2="25.881" y2="28.917" width="0.4064" layer="1"/>
 <wire x1="25.881" y1="28.917" x2="25.781" y2="28.817" width="0.4064" layer="1"/>
 </signal>
 </signals>
 </board>
 </drawing>

slave-daughter/slave-daughter-camera.sch

➞

Show inline comments

@@ @@ -391,6 +391,212 @@ We've spent an enormous amount of time c @@
 <rectangle x1="20.0279" y1="-0.2921" x2="20.6121" y2="0.2921" layer="51"/>
 <rectangle x1="22.5679" y1="-0.2921" x2="23.1521" y2="0.2921" layer="51" rot="R90"/>
 </package>
 <package name="1206">
 <wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-0.965" y1="0.787" x2="0.965" y2="0.787" width="0.1016" layer="51"/>
 <wire x1="-0.965" y1="-0.787" x2="0.965" y2="-0.787" width="0.1016" layer="51"/>
 <smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
 <smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
 <text x="-1.27" y="1.143" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.397" y="-1.524" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-1.7018" y1="-0.8509" x2="-0.9517" y2="0.8491" layer="51"/>
 <rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
 </package>
 <package name="AXIAL-0.3">
 <wire x1="-2.54" y1="0.762" x2="2.54" y2="0.762" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="0.762" x2="2.54" y2="0" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.54" y2="-0.762" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="-0.762" x2="-2.54" y2="-0.762" width="0.2032" layer="21"/>
 <wire x1="-2.54" y1="-0.762" x2="-2.54" y2="0" width="0.2032" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.54" y2="0.762" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.794" y2="0" width="0.2032" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.794" y2="0" width="0.2032" layer="21"/>
 <pad name="P$1" x="-3.81" y="0" drill="0.9" diameter="1.8796"/>
 <pad name="P$2" x="3.81" y="0" drill="0.9" diameter="1.8796"/>
 <text x="-2.54" y="1.27" size="0.4064" layer="25" font="vector">&gt;Name</text>
 <text x="-2.032" y="-0.381" size="1.016" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="R2010">
 <description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
 chip</description>
 <wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
 <wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
 <wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
 <wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
 <wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
 <wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
 <wire x1="-1.027" y1="1.245" x2="1.027" y2="1.245" width="0.1524" layer="21"/>
 <wire x1="-1.002" y1="-1.245" x2="1.016" y2="-1.245" width="0.1524" layer="21"/>
 <smd name="1" x="-2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
 <smd name="2" x="2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
 <text x="-2.54" y="1.5875" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-2.54" y="-2.032" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
 <rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
 </package>
 <package name="0805">
 <wire x1="-0.3" y1="0.6" x2="0.3" y2="0.6" width="0.1524" layer="21"/>
 <wire x1="-0.3" y1="-0.6" x2="0.3" y2="-0.6" width="0.1524" layer="21"/>
 <smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
 <smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
 <text x="-0.762" y="0.8255" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-1.397" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="0603-RES">
 <wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
 <wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
 <smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
 <text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
 <rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
 <rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 <rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/>
 </package>
 <package name="0402-RES">
 <description>&lt;b&gt;CAPACITOR&lt;/b&gt;&lt;p&gt;
 chip</description>
 <wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
 <wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
 <wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
 <smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
 <smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
 <text x="-0.889" y="0.6985" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.0795" y="-1.143" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
 <rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 <rectangle x1="-0.2032" y1="-0.3556" x2="0.2032" y2="0.3556" layer="21"/>
 </package>
 <package name="1/6W-RES">
 <description>1/6W Thru-hole Resistor - *UNPROVEN*</description>
 <wire x1="-1.55" y1="0.85" x2="-1.55" y2="-0.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-0.85" x2="1.55" y2="-0.85" width="0.2032" layer="21"/>
 <wire x1="1.55" y1="-0.85" x2="1.55" y2="0.85" width="0.2032" layer="21"/>
 <wire x1="1.55" y1="0.85" x2="-1.55" y2="0.85" width="0.2032" layer="21"/>
 <pad name="1" x="-2.5" y="0" drill="0.762"/>
 <pad name="2" x="2.5" y="0" drill="0.762"/>
 <text x="-1.2662" y="0.9552" size="0.6096" layer="25">&gt;NAME</text>
 <text x="-1.423" y="-0.4286" size="0.8128" layer="21" ratio="15">&gt;VALUE</text>
 </package>
 <package name="R2512">
 <wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
 <wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
 <smd name="1" x="-2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
 <smd name="2" x="2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
 <text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
 <text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
 <rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
 <rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
 </package>
 <package name="AXIAL-0.4">
 <description>1/4W Resistor, 0.4" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-3.15" y1="-1.2" x2="-3.15" y2="1.2" width="0.2032" layer="21"/>
 <wire x1="-3.15" y1="1.2" x2="3.15" y2="1.2" width="0.2032" layer="21"/>
 <wire x1="3.15" y1="1.2" x2="3.15" y2="-1.2" width="0.2032" layer="21"/>
 <wire x1="3.15" y1="-1.2" x2="-3.15" y2="-1.2" width="0.2032" layer="21"/>
 <pad name="P$1" x="-5.08" y="0" drill="0.9" diameter="1.8796"/>
 <pad name="P$2" x="5.08" y="0" drill="0.9" diameter="1.8796"/>
 <text x="-3.175" y="1.905" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-2.286" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.5">
 <description>1/2W Resistor, 0.5" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-4.5" y1="-1.65" x2="-4.5" y2="1.65" width="0.2032" layer="21"/>
 <wire x1="-4.5" y1="1.65" x2="4.5" y2="1.65" width="0.2032" layer="21"/>
 <wire x1="4.5" y1="1.65" x2="4.5" y2="-1.65" width="0.2032" layer="21"/>
 <wire x1="4.5" y1="-1.65" x2="-4.5" y2="-1.65" width="0.2032" layer="21"/>
 <pad name="P$1" x="-6.35" y="0" drill="0.9" diameter="1.8796"/>
 <pad name="P$2" x="6.35" y="0" drill="0.9" diameter="1.8796"/>
 <text x="-4.445" y="2.54" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-3.429" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.6">
 <description>1W Resistor, 0.6" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-5.75" y1="-2.25" x2="-5.75" y2="2.25" width="0.2032" layer="21"/>
 <wire x1="-5.75" y1="2.25" x2="5.75" y2="2.25" width="0.2032" layer="21"/>
 <wire x1="5.75" y1="2.25" x2="5.75" y2="-2.25" width="0.2032" layer="21"/>
 <wire x1="5.75" y1="-2.25" x2="-5.75" y2="-2.25" width="0.2032" layer="21"/>
 <pad name="P$1" x="-7.62" y="0" drill="1.2" diameter="1.8796"/>
 <pad name="P$2" x="7.62" y="0" drill="1.2" diameter="1.8796"/>
 <text x="-5.715" y="3.175" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-4.064" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.8">
 <description>2W Resistor, 0.8" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-7.75" y1="-2.5" x2="-7.75" y2="2.5" width="0.2032" layer="21"/>
 <wire x1="-7.75" y1="2.5" x2="7.75" y2="2.5" width="0.2032" layer="21"/>
 <wire x1="7.75" y1="2.5" x2="7.75" y2="-2.5" width="0.2032" layer="21"/>
 <wire x1="7.75" y1="-2.5" x2="-7.75" y2="-2.5" width="0.2032" layer="21"/>
 <pad name="P$1" x="-10.16" y="0" drill="1.2" diameter="1.8796"/>
 <pad name="P$2" x="10.16" y="0" drill="1.2" diameter="1.8796"/>
 <text x="-7.62" y="3.175" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-5.969" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.3-KIT">
 <description>&lt;h3&gt;AXIAL-0.3-KIT&lt;/h3&gt;
 Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.&lt;br&gt;
 &lt;br&gt;
 &lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
 <wire x1="-2.54" y1="1.27" x2="2.54" y2="1.27" width="0.254" layer="21"/>
 <wire x1="2.54" y1="1.27" x2="2.54" y2="0" width="0.254" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.54" y2="-1.27" width="0.254" layer="21"/>
 <wire x1="2.54" y1="-1.27" x2="-2.54" y2="-1.27" width="0.254" layer="21"/>
 <wire x1="-2.54" y1="-1.27" x2="-2.54" y2="0" width="0.254" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.54" y2="1.27" width="0.254" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.794" y2="0" width="0.254" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.794" y2="0" width="0.254" layer="21"/>
 <pad name="P$1" x="-3.81" y="0" drill="1.016" diameter="2.032" stop="no"/>
 <pad name="P$2" x="3.81" y="0" drill="1.016" diameter="2.032" stop="no"/>
 <text x="-2.54" y="1.27" size="0.4064" layer="25" font="vector">&gt;Name</text>
 <text x="-2.159" y="-0.762" size="1.27" layer="21" font="vector" ratio="15">&gt;Value</text>
 <polygon width="0.127" layer="30">
 <vertex x="3.8201" y="-0.9449" curve="-90"/>
 <vertex x="2.8652" y="-0.0152" curve="-90.011749"/>
 <vertex x="3.8176" y="0.9602" curve="-90"/>
 <vertex x="4.7676" y="-0.0178" curve="-90.024193"/>
 </polygon>
 <polygon width="0.127" layer="29">
 <vertex x="3.8176" y="-0.4369" curve="-90.012891"/>
 <vertex x="3.3731" y="-0.0127" curve="-90"/>
 <vertex x="3.8176" y="0.4546" curve="-90"/>
 <vertex x="4.2595" y="-0.0025" curve="-90.012967"/>
 </polygon>
 <polygon width="0.127" layer="30">
 <vertex x="-3.8075" y="-0.9525" curve="-90"/>
 <vertex x="-4.7624" y="-0.0228" curve="-90.011749"/>
 <vertex x="-3.81" y="0.9526" curve="-90"/>
 <vertex x="-2.86" y="-0.0254" curve="-90.024193"/>
 </polygon>
 <polygon width="0.127" layer="29">
 <vertex x="-3.81" y="-0.4445" curve="-90.012891"/>
 <vertex x="-4.2545" y="-0.0203" curve="-90"/>
 <vertex x="-3.81" y="0.447" curve="-90"/>
 <vertex x="-3.3681" y="-0.0101" curve="-90.012967"/>
 </polygon>
 </package>
 </packages>
 <symbols>
 <symbol name="LETTER_L">
@@ @@ -467,6 +673,21 @@ We've spent an enormous amount of time c @@
 <text x="-1.016" y="3.556" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="VCC" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
 <symbol name="RESISTOR">
 <wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="-1.524" y1="-1.016" x2="-0.889" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="-0.889" y1="1.016" x2="-0.254" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="-0.254" y1="-1.016" x2="0.381" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="0.381" y1="1.016" x2="1.016" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="1.016" y1="-1.016" x2="1.651" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="1.651" y1="1.016" x2="2.286" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="2.286" y1="-1.016" x2="2.54" y2="0" width="0.1524" layer="94"/>
 <text x="-3.81" y="1.4986" size="1.778" layer="95">&gt;NAME</text>
 <text x="-3.81" y="-3.302" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="FRAME-LETTER" prefix="FRAME">
@@ @@ -604,6 +825,132 @@ Standard 10-pin 0.1" header. Use with st @@
 </device>
 </devices>
 </deviceset>
 <deviceset name="RESISTOR" prefix="R" uservalue="yes">
 <description>&lt;b&gt;Resistor&lt;/b&gt;
 Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</description>
 <gates>
 <gate name="G$1" symbol="RESISTOR" x="0" y="0"/>
 </gates>
 <devices>
 <device name="1206" package="1206">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="AXIAL-0.3" package="AXIAL-0.3">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="2010" package="R2010">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0805-RES" package="0805">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0603-RES" package="0603-RES">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0402-RES" package="0402-RES">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1/6W" package="1/6W-RES">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="2512" package="R2512">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1/4W" package="AXIAL-0.4">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1/2W" package="AXIAL-0.5">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1W" package="AXIAL-0.6">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-2W" package="AXIAL-0.8">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="KIT" package="AXIAL-0.3-KIT">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="SLAT-CON-JST-ZH">
@@ @@ -661,6 +1008,1230 @@ Standard 10-pin 0.1" header. Use with st @@
 </deviceset>
 </devicesets>
 </library>
 <library name="adafruit">
 <packages>
 <package name="1206">
 <description>&lt;b&gt;CHICAGO MINIATURE LAMP, INC.&lt;/b&gt;&lt;p&gt;
 X Series SMT LEDs 1206 Package Size</description>
 <wire x1="1.55" y1="-0.75" x2="-1.55" y2="-0.75" width="0.1016" layer="51"/>
 <wire x1="-1.55" y1="-0.75" x2="-1.55" y2="0.75" width="0.1016" layer="51"/>
 <wire x1="-1.55" y1="0.75" x2="1.55" y2="0.75" width="0.1016" layer="51"/>
 <wire x1="1.55" y1="0.75" x2="1.55" y2="-0.75" width="0.1016" layer="51"/>
 <wire x1="-0.55" y1="-0.5" x2="0.55" y2="-0.5" width="0.1016" layer="21" curve="95.452622" cap="flat"/>
 <wire x1="-0.55" y1="-0.5" x2="-0.55" y2="0.5" width="0.1016" layer="51" curve="-84.547378" cap="flat"/>
 <wire x1="-0.55" y1="0.5" x2="0.55" y2="0.5" width="0.1016" layer="21" curve="-95.452622" cap="flat"/>
 <wire x1="0.55" y1="0.5" x2="0.55" y2="-0.5" width="0.1016" layer="51" curve="-84.547378" cap="flat"/>
 <smd name="A" x="-1.422" y="0" dx="1.6" dy="1.803" layer="1"/>
 <smd name="C" x="1.422" y="0" dx="1.6" dy="1.803" layer="1"/>
 <text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
 <text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.1" y1="-0.1" x2="0.1" y2="0.1" layer="21"/>
 <rectangle x1="0.45" y1="-0.7" x2="0.8" y2="-0.45" layer="51"/>
 <rectangle x1="0.8" y1="-0.7" x2="0.9" y2="0.5" layer="51"/>
 <rectangle x1="0.8" y1="0.55" x2="0.9" y2="0.7" layer="51"/>
 <rectangle x1="-0.9" y1="-0.7" x2="-0.8" y2="0.5" layer="51"/>
 <rectangle x1="-0.9" y1="0.55" x2="-0.8" y2="0.7" layer="51"/>
 <rectangle x1="0.45" y1="-0.7" x2="0.6" y2="-0.45" layer="21"/>
 </package>
 <package name="LD260">
 <description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
 mm, square, Siemens</description>
 <wire x1="-1.27" y1="-1.27" x2="1.27" y2="-1.27" width="0.1524" layer="21"/>
 <wire x1="1.27" y1="1.27" x2="-1.27" y2="1.27" width="0.1524" layer="21"/>
 <wire x1="1.27" y1="-1.27" x2="1.27" y2="-0.889" width="0.1524" layer="21"/>
 <wire x1="1.27" y1="1.27" x2="1.27" y2="0.889" width="0.1524" layer="21"/>
 <wire x1="1.27" y1="0.889" x2="1.27" y2="-0.889" width="0.1524" layer="51"/>
 <wire x1="-1.27" y1="1.27" x2="-1.27" y2="0.889" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="-1.27" x2="-1.27" y2="-0.889" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="-0.889" x2="-1.27" y2="0.889" width="0.1524" layer="51"/>
 <wire x1="0" y1="1.27" x2="0.9917" y2="0.7934" width="0.1524" layer="21" curve="-51.33923" cap="flat"/>
 <wire x1="-0.9917" y1="0.7934" x2="0" y2="1.27" width="0.1524" layer="21" curve="-51.33923" cap="flat"/>
 <wire x1="0" y1="-1.27" x2="0.9917" y2="-0.7934" width="0.1524" layer="21" curve="51.33923" cap="flat"/>
 <wire x1="-0.9917" y1="-0.7934" x2="0" y2="-1.27" width="0.1524" layer="21" curve="51.33923" cap="flat"/>
 <wire x1="0.9558" y1="-0.8363" x2="1.27" y2="0" width="0.1524" layer="51" curve="41.185419" cap="flat"/>
 <wire x1="0.9756" y1="0.813" x2="1.2699" y2="0" width="0.1524" layer="51" curve="-39.806332" cap="flat"/>
 <wire x1="-1.27" y1="0" x2="-0.9643" y2="-0.8265" width="0.1524" layer="51" curve="40.600331" cap="flat"/>
 <wire x1="-1.27" y1="0" x2="-0.9643" y2="0.8265" width="0.1524" layer="51" curve="-40.600331" cap="flat"/>
 <wire x1="-0.889" y1="0" x2="0" y2="0.889" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="-0.508" y1="0" x2="0" y2="0.508" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-0.508" x2="0.508" y2="0" width="0.1524" layer="21" curve="90" cap="flat"/>
 <wire x1="0" y1="-0.889" x2="0.889" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" shape="octagon"/>
 <text x="-1.2954" y="1.4732" size="1.016" layer="25" ratio="14">&gt;NAME</text>
 <text x="-1.27" y="-2.4892" size="1.016" layer="27" ratio="14">&gt;VALUE</text>
 <rectangle x1="1.27" y1="-0.635" x2="2.032" y2="0.635" layer="51"/>
 <rectangle x1="1.905" y1="-0.635" x2="2.032" y2="0.635" layer="21"/>
 </package>
 <package name="LED2X5">
 <description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
 x 5 mm, rectangle</description>
 <wire x1="-2.54" y1="-1.27" x2="2.54" y2="-1.27" width="0.1524" layer="21"/>
 <wire x1="2.54" y1="1.27" x2="2.54" y2="-1.27" width="0.1524" layer="21"/>
 <wire x1="2.54" y1="1.27" x2="-2.54" y2="1.27" width="0.1524" layer="21"/>
 <wire x1="-2.54" y1="-1.27" x2="-2.54" y2="1.27" width="0.1524" layer="21"/>
 <wire x1="-1.905" y1="0" x2="0.508" y2="0" width="0.1524" layer="51"/>
 <wire x1="-0.508" y1="0.381" x2="-0.508" y2="-0.381" width="0.1524" layer="51"/>
 <wire x1="-0.508" y1="0.381" x2="0.508" y2="0" width="0.1524" layer="51"/>
 <wire x1="0.508" y1="0" x2="1.778" y2="0" width="0.1524" layer="51"/>
 <wire x1="0.508" y1="0" x2="-0.508" y2="-0.381" width="0.1524" layer="51"/>
 <wire x1="0.508" y1="0.381" x2="0.508" y2="0" width="0.1524" layer="51"/>
 <wire x1="0.508" y1="0" x2="0.508" y2="-0.381" width="0.1524" layer="51"/>
 <wire x1="0.889" y1="-0.254" x2="1.143" y2="-0.762" width="0.1524" layer="51"/>
 <wire x1="1.143" y1="-0.762" x2="1.143" y2="-0.508" width="0.1524" layer="51"/>
 <wire x1="1.143" y1="-0.762" x2="0.9398" y2="-0.6096" width="0.1524" layer="51"/>
 <wire x1="0.9398" y1="-0.6096" x2="1.143" y2="-0.508" width="0.1524" layer="51"/>
 <wire x1="1.397" y1="-0.254" x2="1.651" y2="-0.762" width="0.1524" layer="51"/>
 <wire x1="1.651" y1="-0.762" x2="1.651" y2="-0.508" width="0.1524" layer="51"/>
 <wire x1="1.651" y1="-0.762" x2="1.4478" y2="-0.6096" width="0.1524" layer="51"/>
 <wire x1="1.4478" y1="-0.6096" x2="1.651" y2="-0.508" width="0.1524" layer="51"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" shape="octagon"/>
 <text x="-2.54" y="1.397" size="1.016" layer="25" ratio="14">&gt;NAME</text>
 <text x="-2.54" y="-2.413" size="1.016" layer="27" ratio="14">&gt;VALUE</text>
 <rectangle x1="2.159" y1="-1.27" x2="2.413" y2="1.27" layer="21"/>
 </package>
 <package name="LED3MM">
 <description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
 mm, round</description>
 <wire x1="1.5748" y1="-1.27" x2="1.5748" y2="1.27" width="0.254" layer="51"/>
 <wire x1="-1.524" y1="0" x2="-1.1708" y2="0.9756" width="0.1524" layer="51" curve="-39.80361" cap="flat"/>
 <wire x1="-1.524" y1="0" x2="-1.1391" y2="-1.0125" width="0.1524" layer="51" curve="41.633208" cap="flat"/>
 <wire x1="1.1571" y1="0.9918" x2="1.524" y2="0" width="0.1524" layer="51" curve="-40.601165" cap="flat"/>
 <wire x1="1.1708" y1="-0.9756" x2="1.524" y2="0" width="0.1524" layer="51" curve="39.80361" cap="flat"/>
 <wire x1="0" y1="1.524" x2="1.2401" y2="0.8858" width="0.1524" layer="21" curve="-54.461337" cap="flat"/>
 <wire x1="-1.2192" y1="0.9144" x2="0" y2="1.524" width="0.1524" layer="21" curve="-53.130102" cap="flat"/>
 <wire x1="0" y1="-1.524" x2="1.203" y2="-0.9356" width="0.1524" layer="21" curve="52.126876" cap="flat"/>
 <wire x1="-1.203" y1="-0.9356" x2="0" y2="-1.524" width="0.1524" layer="21" curve="52.126876" cap="flat"/>
 <wire x1="-0.635" y1="0" x2="0" y2="0.635" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="-1.016" y1="0" x2="0" y2="1.016" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-0.635" x2="0.635" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="0" y1="-1.016" x2="1.016" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="0" y1="2.032" x2="1.561" y2="1.3009" width="0.254" layer="21" curve="-50.193108" cap="flat"/>
 <wire x1="-1.7929" y1="0.9562" x2="0" y2="2.032" width="0.254" layer="21" curve="-61.926949" cap="flat"/>
 <wire x1="0" y1="-2.032" x2="1.5512" y2="-1.3126" width="0.254" layer="21" curve="49.763022" cap="flat"/>
 <wire x1="-1.7643" y1="-1.0082" x2="0" y2="-2.032" width="0.254" layer="21" curve="60.255215" cap="flat"/>
 <wire x1="-2.032" y1="0" x2="-1.7891" y2="0.9634" width="0.254" layer="51" curve="-28.301701" cap="flat"/>
 <wire x1="-2.032" y1="0" x2="-1.7306" y2="-1.065" width="0.254" layer="51" curve="31.60822" cap="flat"/>
 <wire x1="-2.5908" y1="1.7272" x2="-1.8542" y2="1.7272" width="0.127" layer="21"/>
 <wire x1="-2.2352" y1="1.3208" x2="-2.2352" y2="2.1082" width="0.127" layer="21"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" diameter="1.6764" shape="octagon"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" diameter="1.6764" shape="octagon"/>
 <text x="1.905" y="0.381" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="1.905" y="-1.651" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="LED5MM">
 <description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
 mm, round</description>
 <wire x1="2.54" y1="-1.905" x2="2.54" y2="1.905" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="-1.905" x2="2.54" y2="1.905" width="0.254" layer="21" curve="-286.260205" cap="flat"/>
 <wire x1="-1.143" y1="0" x2="0" y2="1.143" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-1.143" x2="1.143" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-1.651" y1="0" x2="0" y2="1.651" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-1.651" x2="1.651" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-2.159" y1="0" x2="0" y2="2.159" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-2.159" x2="2.159" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <circle x="0" y="0" radius="2.54" width="0.1524" layer="21"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" diameter="1.6764" shape="octagon"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" diameter="1.6764" shape="octagon"/>
 <text x="3.175" y="0.5334" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="3.2004" y="-1.8034" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="LSU260">
 <description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
 mm, round, Siemens</description>
 <wire x1="0" y1="-0.508" x2="-1.143" y2="-0.508" width="0.1524" layer="51"/>
 <wire x1="-1.143" y1="-0.508" x2="-1.143" y2="-0.254" width="0.1524" layer="51"/>
 <wire x1="-1.143" y1="0.508" x2="0" y2="0.508" width="0.1524" layer="51"/>
 <wire x1="-1.143" y1="-0.254" x2="-1.397" y2="-0.254" width="0.1524" layer="51"/>
 <wire x1="-1.143" y1="-0.254" x2="-1.143" y2="0.254" width="0.1524" layer="51"/>
 <wire x1="-1.397" y1="-0.254" x2="-1.397" y2="0.254" width="0.1524" layer="51"/>
 <wire x1="-1.397" y1="0.254" x2="-1.143" y2="0.254" width="0.1524" layer="51"/>
 <wire x1="-1.143" y1="0.254" x2="-1.143" y2="0.508" width="0.1524" layer="51"/>
 <wire x1="0.508" y1="-0.254" x2="1.397" y2="-0.254" width="0.1524" layer="51"/>
 <wire x1="1.397" y1="-0.254" x2="1.397" y2="0.254" width="0.1524" layer="51"/>
 <wire x1="1.397" y1="0.254" x2="0.508" y2="0.254" width="0.1524" layer="51"/>
 <wire x1="0.381" y1="-0.381" x2="0.254" y2="-0.508" width="0.1524" layer="21"/>
 <wire x1="0.254" y1="-0.508" x2="-0.254" y2="-0.508" width="0.1524" layer="21"/>
 <wire x1="-0.381" y1="-0.381" x2="-0.254" y2="-0.508" width="0.1524" layer="21"/>
 <wire x1="0.381" y1="0.381" x2="0.254" y2="0.508" width="0.1524" layer="21"/>
 <wire x1="0.254" y1="0.508" x2="-0.254" y2="0.508" width="0.1524" layer="21"/>
 <wire x1="-0.381" y1="0.381" x2="-0.254" y2="0.508" width="0.1524" layer="21"/>
 <wire x1="0" y1="-0.254" x2="0.254" y2="0" width="0.1524" layer="21" curve="90" cap="flat"/>
 <wire x1="-0.254" y1="0" x2="0" y2="0.254" width="0.1524" layer="21" curve="-90" cap="flat"/>
 <wire x1="0.381" y1="-0.381" x2="0.381" y2="0.381" width="0.1524" layer="21" curve="90"/>
 <circle x="0" y="0" radius="0.508" width="0.1524" layer="51"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" shape="octagon"/>
 <text x="-1.2954" y="0.8382" size="1.016" layer="25" ratio="14">&gt;NAME</text>
 <text x="-1.27" y="-1.8542" size="1.016" layer="27" ratio="14">&gt;VALUE</text>
 <rectangle x1="-1.397" y1="-0.254" x2="-1.143" y2="0.254" layer="51"/>
 <rectangle x1="0.508" y1="-0.254" x2="1.397" y2="0.254" layer="51"/>
 </package>
 <package name="LZR181">
 <description>&lt;B&gt;LED BLOCK&lt;/B&gt;&lt;p&gt;
 LED, Siemens</description>
 <wire x1="-1.27" y1="-1.27" x2="1.27" y2="-1.27" width="0.1524" layer="21"/>
 <wire x1="1.27" y1="-1.27" x2="1.27" y2="-0.889" width="0.1524" layer="21"/>
 <wire x1="1.27" y1="1.27" x2="1.27" y2="0.889" width="0.1524" layer="21"/>
 <wire x1="1.27" y1="0.889" x2="1.27" y2="-0.889" width="0.1524" layer="51"/>
 <wire x1="-1.27" y1="1.27" x2="-1.27" y2="0.889" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="-1.27" x2="-1.27" y2="-0.889" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="-0.889" x2="-1.27" y2="0.889" width="0.1524" layer="51"/>
 <wire x1="-0.889" y1="0" x2="0" y2="0.889" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="-0.508" y1="0" x2="0" y2="0.508" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-0.508" x2="0.508" y2="0" width="0.1524" layer="21" curve="90" cap="flat"/>
 <wire x1="0" y1="-0.889" x2="0.889" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-0.8678" y1="0.7439" x2="0" y2="1.143" width="0.1524" layer="21" curve="-49.396139" cap="flat"/>
 <wire x1="0" y1="1.143" x2="0.8678" y2="0.7439" width="0.1524" layer="21" curve="-49.396139" cap="flat"/>
 <wire x1="-0.8678" y1="-0.7439" x2="0" y2="-1.143" width="0.1524" layer="21" curve="49.396139" cap="flat"/>
 <wire x1="0" y1="-1.143" x2="0.8678" y2="-0.7439" width="0.1524" layer="21" curve="49.396139" cap="flat"/>
 <wire x1="0.8678" y1="0.7439" x2="1.143" y2="0" width="0.1524" layer="51" curve="-40.604135" cap="flat"/>
 <wire x1="0.8678" y1="-0.7439" x2="1.143" y2="0" width="0.1524" layer="51" curve="40.604135" cap="flat"/>
 <wire x1="-1.143" y1="0" x2="-0.8678" y2="0.7439" width="0.1524" layer="51" curve="-40.604135" cap="flat"/>
 <wire x1="-1.143" y1="0" x2="-0.8678" y2="-0.7439" width="0.1524" layer="51" curve="40.604135" cap="flat"/>
 <wire x1="-1.27" y1="1.27" x2="1.27" y2="1.27" width="0.1524" layer="21"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" shape="octagon"/>
 <text x="-1.2954" y="1.4732" size="1.016" layer="25" ratio="14">&gt;NAME</text>
 <text x="-1.27" y="-2.4892" size="1.016" layer="27" ratio="14">&gt;VALUE</text>
 <rectangle x1="1.27" y1="-0.889" x2="1.524" y2="0.254" layer="51"/>
 <rectangle x1="-1.524" y1="-0.254" x2="-1.27" y2="0.254" layer="51"/>
 </package>
 <package name="Q62902-B152">
 <description>&lt;b&gt;LED HOLDER&lt;/b&gt;&lt;p&gt;
 Siemens</description>
 <wire x1="2.9718" y1="-1.8542" x2="-2.1082" y2="-1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.1082" y1="1.8542" x2="2.9718" y2="1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.9718" y1="-1.8542" x2="-2.9718" y2="1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.1082" y1="-1.8542" x2="-2.54" y2="-1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.1082" y1="1.8542" x2="-2.54" y2="1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.54" y1="-1.8542" x2="-2.54" y2="1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.54" y1="-1.8542" x2="-2.9718" y2="-1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.54" y1="1.8542" x2="-2.9718" y2="1.8542" width="0.1524" layer="21"/>
 <wire x1="-2.9718" y1="0.254" x2="-2.9718" y2="-0.254" width="0.1524" layer="21" curve="180"/>
 <wire x1="-1.1486" y1="0.8814" x2="0" y2="1.4478" width="0.1524" layer="21" curve="-52.498642" cap="flat"/>
 <wire x1="0" y1="1.4478" x2="1.1476" y2="0.8827" width="0.1524" layer="21" curve="-52.433716" cap="flat"/>
 <wire x1="-1.1351" y1="-0.8987" x2="0" y2="-1.4478" width="0.1524" layer="21" curve="51.629985" cap="flat"/>
 <wire x1="0" y1="-1.4478" x2="1.1305" y2="-0.9044" width="0.1524" layer="21" curve="51.339172" cap="flat"/>
 <wire x1="1.1281" y1="-0.9074" x2="1.4478" y2="0" width="0.1524" layer="51" curve="38.811177" cap="flat"/>
 <wire x1="1.1401" y1="0.8923" x2="1.4478" y2="0" width="0.1524" layer="51" curve="-38.048073" cap="flat"/>
 <wire x1="-1.4478" y1="0" x2="-1.1305" y2="-0.9044" width="0.1524" layer="51" curve="38.659064" cap="flat"/>
 <wire x1="-1.4478" y1="0" x2="-1.1456" y2="0.8853" width="0.1524" layer="51" curve="-37.696376" cap="flat"/>
 <wire x1="0" y1="1.7018" x2="1.4674" y2="0.8618" width="0.1524" layer="21" curve="-59.573488" cap="flat"/>
 <wire x1="-1.4618" y1="0.8714" x2="0" y2="1.7018" width="0.1524" layer="21" curve="-59.200638" cap="flat"/>
 <wire x1="0" y1="-1.7018" x2="1.4571" y2="-0.8793" width="0.1524" layer="21" curve="58.891781" cap="flat"/>
 <wire x1="-1.4571" y1="-0.8793" x2="0" y2="-1.7018" width="0.1524" layer="21" curve="58.891781" cap="flat"/>
 <wire x1="-1.7018" y1="0" x2="-1.4447" y2="0.8995" width="0.1524" layer="51" curve="-31.907626" cap="flat"/>
 <wire x1="-1.7018" y1="0" x2="-1.4502" y2="-0.8905" width="0.1524" layer="51" curve="31.551992" cap="flat"/>
 <wire x1="1.4521" y1="0.8874" x2="1.7018" y2="0" width="0.1524" layer="51" curve="-31.429586" cap="flat"/>
 <wire x1="1.4459" y1="-0.8975" x2="1.7018" y2="0" width="0.1524" layer="51" curve="31.828757" cap="flat"/>
 <wire x1="-2.1082" y1="1.8542" x2="-2.1082" y2="0.4826" width="0.1524" layer="21"/>
 <wire x1="-2.1082" y1="0.4826" x2="-2.1082" y2="-0.4826" width="0.1524" layer="21"/>
 <wire x1="-2.1082" y1="-0.4826" x2="-2.1082" y2="-1.8542" width="0.1524" layer="21"/>
 <wire x1="-0.635" y1="0" x2="0" y2="0.635" width="0.1524" layer="21" curve="-90" cap="flat"/>
 <wire x1="-1.016" y1="0" x2="0" y2="1.016" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-0.635" x2="0.635" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="0" y1="-1.016" x2="1.016" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="2.9718" y1="1.8542" x2="2.9718" y2="0.4826" width="0.1524" layer="21"/>
 <wire x1="2.9718" y1="0.4826" x2="2.9718" y2="-0.4826" width="0.1524" layer="21"/>
 <wire x1="2.9718" y1="-0.4826" x2="2.9718" y2="-1.8542" width="0.1524" layer="21"/>
 <pad name="K" x="-1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <pad name="A" x="1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <text x="-1.905" y="2.286" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="-1.905" y="-3.556" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="Q62902-B153">
 <description>&lt;b&gt;LED HOLDER&lt;/b&gt;&lt;p&gt;
 Siemens</description>
 <wire x1="5.5118" y1="-3.5052" x2="-4.6482" y2="-3.5052" width="0.1524" layer="21"/>
 <wire x1="-4.6482" y1="3.5052" x2="5.5118" y2="3.5052" width="0.1524" layer="21"/>
 <wire x1="-5.5118" y1="-3.5052" x2="-5.5118" y2="3.5052" width="0.1524" layer="21"/>
 <wire x1="-4.6482" y1="-3.5052" x2="-5.08" y2="-3.5052" width="0.1524" layer="21"/>
 <wire x1="-4.6482" y1="3.5052" x2="-5.08" y2="3.5052" width="0.1524" layer="21"/>
 <wire x1="-5.08" y1="-3.5052" x2="-5.08" y2="3.5052" width="0.1524" layer="21"/>
 <wire x1="-5.08" y1="-3.5052" x2="-5.5118" y2="-3.5052" width="0.1524" layer="21"/>
 <wire x1="-5.08" y1="3.5052" x2="-5.5118" y2="3.5052" width="0.1524" layer="21"/>
 <wire x1="-5.5118" y1="0.254" x2="-5.5118" y2="-0.254" width="0.1524" layer="21" curve="180"/>
 <wire x1="-4.6482" y1="3.5052" x2="-4.6482" y2="-3.5052" width="0.1524" layer="21"/>
 <wire x1="5.5118" y1="3.5052" x2="5.5118" y2="-3.5052" width="0.1524" layer="21"/>
 <wire x1="-2.54" y1="1.905" x2="-2.54" y2="-1.905" width="0.254" layer="21"/>
 <wire x1="0" y1="-1.143" x2="1.143" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-1.143" y1="0" x2="0" y2="1.143" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-1.651" x2="1.651" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-1.651" y1="0" x2="0" y2="1.651" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-2.159" x2="2.159" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-2.159" y1="0" x2="0" y2="2.159" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <circle x="0" y="0" radius="2.54" width="0.1524" layer="21"/>
 <circle x="0" y="0" radius="3.175" width="0.254" layer="21"/>
 <pad name="A" x="1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <pad name="K" x="-1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <text x="-4.191" y="3.937" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="-4.318" y="-5.08" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="Q62902-B155">
 <description>&lt;b&gt;LED HOLDER&lt;/b&gt;&lt;p&gt;
 Siemens</description>
 <wire x1="-1.27" y1="-3.048" x2="-1.27" y2="-2.54" width="0.1524" layer="21"/>
 <wire x1="10.033" y1="3.048" x2="2.921" y2="3.048" width="0.1524" layer="21"/>
 <wire x1="10.033" y1="3.048" x2="10.033" y2="-3.048" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="-3.048" x2="2.921" y2="-3.048" width="0.1524" layer="21"/>
 <wire x1="2.921" y1="-3.048" x2="2.921" y2="3.048" width="0.1524" layer="21"/>
 <wire x1="2.921" y1="-3.048" x2="10.033" y2="-3.048" width="0.1524" layer="21"/>
 <wire x1="2.921" y1="3.048" x2="-1.27" y2="3.048" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="2.54" x2="-5.207" y2="2.54" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="2.54" x2="-1.27" y2="3.048" width="0.1524" layer="21"/>
 <wire x1="-5.207" y1="-2.54" x2="-1.27" y2="-2.54" width="0.1524" layer="21"/>
 <wire x1="-1.27" y1="-2.54" x2="-1.27" y2="2.54" width="0.1524" layer="21"/>
 <wire x1="-5.207" y1="2.54" x2="-5.207" y2="-2.54" width="0.1524" layer="21" curve="180"/>
 <wire x1="-6.985" y1="0.635" x2="-6.985" y2="-0.635" width="0.1524" layer="21"/>
 <wire x1="-6.096" y1="1.397" x2="-6.096" y2="-1.397" width="0.1524" layer="21"/>
 <wire x1="-5.207" y1="1.905" x2="-5.207" y2="-1.905" width="0.1524" layer="21"/>
 <pad name="K" x="7.62" y="1.27" drill="0.8128" shape="long"/>
 <pad name="A" x="7.62" y="-1.27" drill="0.8128" shape="long"/>
 <text x="3.302" y="-2.794" size="1.016" layer="21" ratio="14">A+</text>
 <text x="3.302" y="1.778" size="1.016" layer="21" ratio="14">K-</text>
 <text x="11.684" y="-2.794" size="1.27" layer="25" ratio="10" rot="R90">&gt;NAME</text>
 <text x="0.635" y="-4.445" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 <rectangle x1="2.921" y1="1.016" x2="6.731" y2="1.524" layer="21"/>
 <rectangle x1="2.921" y1="-1.524" x2="6.731" y2="-1.016" layer="21"/>
 <hole x="0" y="0" drill="0.8128"/>
 </package>
 <package name="Q62902-B156">
 <description>&lt;b&gt;LED HOLDER&lt;/b&gt;&lt;p&gt;
 Siemens</description>
 <wire x1="2.54" y1="-1.905" x2="2.54" y2="1.905" width="0.1524" layer="21"/>
 <wire x1="-1.143" y1="0" x2="0" y2="1.143" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-1.143" x2="1.143" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-1.651" y1="0" x2="0" y2="1.651" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-1.651" x2="1.651" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="-2.159" y1="0" x2="0" y2="2.159" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-2.159" x2="2.159" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="2.54" y1="3.81" x2="3.81" y2="2.54" width="0.1524" layer="21"/>
 <wire x1="2.54" y1="3.81" x2="-3.81" y2="3.81" width="0.1524" layer="21"/>
 <wire x1="-3.81" y1="-3.81" x2="-3.81" y2="3.81" width="0.1524" layer="21"/>
 <wire x1="3.81" y1="2.54" x2="3.81" y2="-3.81" width="0.1524" layer="21"/>
 <wire x1="-3.81" y1="-3.81" x2="-2.54" y2="-3.81" width="0.1524" layer="21"/>
 <wire x1="-2.54" y1="-3.302" x2="-2.54" y2="-3.81" width="0.1524" layer="21"/>
 <wire x1="3.81" y1="-3.81" x2="2.54" y2="-3.81" width="0.1524" layer="21"/>
 <wire x1="2.54" y1="-3.302" x2="2.54" y2="-3.81" width="0.1524" layer="21"/>
 <wire x1="2.54" y1="-3.302" x2="-2.54" y2="-3.302" width="0.1524" layer="21"/>
 <circle x="0" y="0" radius="2.54" width="0.1524" layer="21"/>
 <circle x="0" y="0" radius="3.175" width="0.254" layer="21"/>
 <pad name="A" x="-1.27" y="0" drill="1.016" shape="long" rot="R90"/>
 <pad name="K" x="1.27" y="0" drill="1.016" shape="long" rot="R90"/>
 <text x="-3.81" y="4.0894" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="-3.7846" y="-5.3594" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 <text x="-3.556" y="-3.302" size="1.016" layer="21" ratio="14">+</text>
 <text x="2.794" y="-3.302" size="1.016" layer="21" ratio="14">-</text>
 </package>
 <package name="SFH480">
 <description>&lt;B&gt;IR LED&lt;/B&gt;&lt;p&gt;
 infrared emitting diode, Infineon
 TO-18, lead spacing 2.54 mm, cathode marking&lt;p&gt;
 Inifineon</description>
 <wire x1="-2.159" y1="1.524" x2="-2.794" y2="2.159" width="0.1524" layer="21"/>
 <wire x1="-2.794" y1="2.159" x2="-2.159" y2="2.794" width="0.1524" layer="21"/>
 <wire x1="-1.524" y1="2.159" x2="-2.159" y2="2.794" width="0.1524" layer="21"/>
 <wire x1="0" y1="1.778" x2="1.5358" y2="0.8959" width="0.1524" layer="21" curve="-59.743278" cap="flat"/>
 <wire x1="-1.5358" y1="0.8959" x2="0" y2="1.778" width="0.1524" layer="21" curve="-59.743278" cap="flat"/>
 <wire x1="-1.5358" y1="-0.8959" x2="0" y2="-1.778" width="0.1524" layer="21" curve="59.743278" cap="flat"/>
 <wire x1="0" y1="-1.778" x2="1.5358" y2="-0.8959" width="0.1524" layer="21" curve="59.743278" cap="flat"/>
 <wire x1="1.5142" y1="0.9318" x2="1.778" y2="0" width="0.1524" layer="51" curve="-31.606487" cap="flat"/>
 <wire x1="1.5" y1="-0.9546" x2="1.778" y2="0" width="0.1524" layer="51" curve="32.472615" cap="flat"/>
 <wire x1="-1.778" y1="0" x2="-1.5142" y2="-0.9318" width="0.1524" layer="51" curve="31.606487" cap="flat"/>
 <wire x1="-1.778" y1="0" x2="-1.5" y2="0.9546" width="0.1524" layer="51" curve="-32.472615" cap="flat"/>
 <wire x1="-0.635" y1="0" x2="0" y2="0.635" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="-1.016" y1="0" x2="0" y2="1.016" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-0.635" x2="0.635" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="0" y1="-1.016" x2="1.016" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <circle x="0" y="0" radius="2.667" width="0.1524" layer="21"/>
 <circle x="0" y="0" radius="2.413" width="0.254" layer="21"/>
 <pad name="K" x="-1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <pad name="A" x="1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <text x="-1.27" y="3.048" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="-1.27" y="-4.318" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="SFH482">
 <description>&lt;B&gt;IR LED&lt;/B&gt;&lt;p&gt;
 infrared emitting diode, Infineon
 TO-18, lead spacing 2.54 mm, cathode marking&lt;p&gt;
 Inifineon</description>
 <wire x1="-2.159" y1="1.524" x2="-2.794" y2="2.159" width="0.1524" layer="21"/>
 <wire x1="-2.794" y1="2.159" x2="-2.159" y2="2.794" width="0.1524" layer="21"/>
 <wire x1="-1.524" y1="2.159" x2="-2.159" y2="2.794" width="0.1524" layer="21"/>
 <wire x1="0" y1="1.778" x2="1.5358" y2="0.8959" width="0.1524" layer="21" curve="-59.743278" cap="flat"/>
 <wire x1="-1.5358" y1="0.8959" x2="0" y2="1.778" width="0.1524" layer="21" curve="-59.743278" cap="flat"/>
 <wire x1="-1.5358" y1="-0.8959" x2="0" y2="-1.778" width="0.1524" layer="21" curve="59.743278" cap="flat"/>
 <wire x1="0" y1="-1.778" x2="1.5358" y2="-0.8959" width="0.1524" layer="21" curve="59.743278" cap="flat"/>
 <wire x1="1.5142" y1="0.9318" x2="1.778" y2="0" width="0.1524" layer="51" curve="-31.606487" cap="flat"/>
 <wire x1="1.5" y1="-0.9546" x2="1.778" y2="0" width="0.1524" layer="51" curve="32.472615" cap="flat"/>
 <wire x1="-1.778" y1="0" x2="-1.5142" y2="-0.9318" width="0.1524" layer="51" curve="31.606487" cap="flat"/>
 <wire x1="-1.778" y1="0" x2="-1.5" y2="0.9546" width="0.1524" layer="51" curve="-32.472615" cap="flat"/>
 <wire x1="-0.635" y1="0" x2="0" y2="0.635" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="-1.016" y1="0" x2="0" y2="1.016" width="0.1524" layer="51" curve="-90" cap="flat"/>
 <wire x1="0" y1="-0.635" x2="0.635" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <wire x1="0" y1="-1.016" x2="1.016" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
 <circle x="0" y="0" radius="2.667" width="0.1524" layer="21"/>
 <circle x="0" y="0" radius="2.413" width="0.254" layer="21"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <text x="-1.27" y="3.048" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="-1.27" y="-4.318" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="U57X32">
 <description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
 rectangle, 5.7 x 3.2 mm</description>
 <wire x1="-3.175" y1="1.905" x2="3.175" y2="1.905" width="0.1524" layer="21"/>
 <wire x1="3.175" y1="-1.905" x2="3.175" y2="1.905" width="0.1524" layer="21"/>
 <wire x1="3.175" y1="-1.905" x2="-3.175" y2="-1.905" width="0.1524" layer="21"/>
 <wire x1="-3.175" y1="1.905" x2="-3.175" y2="-1.905" width="0.1524" layer="21"/>
 <wire x1="-2.667" y1="1.397" x2="2.667" y2="1.397" width="0.1524" layer="21"/>
 <wire x1="2.667" y1="-1.397" x2="2.667" y2="1.397" width="0.1524" layer="21"/>
 <wire x1="2.667" y1="-1.397" x2="-2.667" y2="-1.397" width="0.1524" layer="21"/>
 <wire x1="-2.667" y1="1.397" x2="-2.667" y2="-1.397" width="0.1524" layer="21"/>
 <wire x1="-2.54" y1="1.016" x2="2.54" y2="1.016" width="0.1524" layer="51"/>
 <wire x1="2.286" y1="1.27" x2="2.286" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="-2.54" y1="0.508" x2="2.54" y2="0.508" width="0.1524" layer="51"/>
 <wire x1="-2.54" y1="0" x2="2.54" y2="0" width="0.1524" layer="51"/>
 <wire x1="-2.54" y1="-0.508" x2="2.54" y2="-0.508" width="0.1524" layer="51"/>
 <wire x1="-2.54" y1="-1.016" x2="2.54" y2="-1.016" width="0.1524" layer="51"/>
 <wire x1="-2.286" y1="1.27" x2="-2.286" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="-1.778" y1="1.27" x2="-1.778" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="-1.27" y1="1.27" x2="-1.27" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="-0.762" y1="1.27" x2="-0.762" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="-0.254" y1="1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="0.254" y1="1.27" x2="0.254" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="0.762" y1="1.27" x2="0.762" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="1.27" y1="1.27" x2="1.27" y2="-1.27" width="0.1524" layer="51"/>
 <wire x1="1.778" y1="1.27" x2="1.778" y2="-1.27" width="0.1524" layer="51"/>
 <pad name="A" x="-1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <pad name="K" x="1.27" y="0" drill="0.8128" shape="long" rot="R90"/>
 <text x="3.683" y="0.254" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="3.683" y="-1.524" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="IRL80A">
 <description>&lt;B&gt;IR LED&lt;/B&gt;&lt;p&gt;
 IR transmitter Siemens</description>
 <wire x1="0.889" y1="2.286" x2="0.889" y2="1.778" width="0.1524" layer="21"/>
 <wire x1="0.889" y1="1.778" x2="0.889" y2="0.762" width="0.1524" layer="51"/>
 <wire x1="0.889" y1="0.762" x2="0.889" y2="-0.635" width="0.1524" layer="21"/>
 <wire x1="0.889" y1="-0.635" x2="0.889" y2="-1.778" width="0.1524" layer="51"/>
 <wire x1="0.889" y1="-1.778" x2="0.889" y2="-2.286" width="0.1524" layer="21"/>
 <wire x1="0.889" y1="-2.286" x2="-0.889" y2="-2.286" width="0.1524" layer="21"/>
 <wire x1="-0.889" y1="2.286" x2="-0.889" y2="1.778" width="0.1524" layer="21"/>
 <wire x1="-0.889" y1="1.778" x2="-0.889" y2="0.762" width="0.1524" layer="51"/>
 <wire x1="-0.889" y1="0.762" x2="-0.889" y2="-0.762" width="0.1524" layer="21"/>
 <wire x1="-0.889" y1="-0.762" x2="-0.889" y2="-1.778" width="0.1524" layer="51"/>
 <wire x1="-0.889" y1="-1.778" x2="-0.889" y2="-2.286" width="0.1524" layer="21"/>
 <wire x1="-0.889" y1="2.286" x2="0.889" y2="2.286" width="0.1524" layer="21"/>
 <wire x1="-0.889" y1="-0.762" x2="-0.889" y2="0.762" width="0.1524" layer="21" curve="-180"/>
 <wire x1="-1.397" y1="0.254" x2="-1.397" y2="-0.254" width="0.0508" layer="21"/>
 <wire x1="-1.143" y1="0.508" x2="-1.143" y2="-0.508" width="0.0508" layer="21"/>
 <pad name="K" x="0" y="1.27" drill="0.8128" shape="octagon"/>
 <pad name="A" x="0" y="-1.27" drill="0.8128" shape="octagon"/>
 <text x="1.27" y="0.381" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 <text x="1.27" y="-1.651" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="P-LCC-2">
 <description>&lt;b&gt;TOPLED® High-optical Power LED (HOP)&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... ls_t675.pdf</description>
 <wire x1="-1.4" y1="1.6" x2="-1.4" y2="-0.65" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="-1.05" x2="-1.4" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="-1.6" x2="-1.1" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-1.1" y1="-1.6" x2="-0.85" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-0.85" y1="-1.6" x2="1.1" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="1.1" y1="-1.6" x2="1.4" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="1.4" y1="-1.6" x2="1.4" y2="1.6" width="0.2032" layer="51"/>
 <wire x1="1.4" y1="1.6" x2="-1.4" y2="1.6" width="0.2032" layer="51"/>
 <wire x1="-1.1" y1="1.6" x2="-1.1" y2="1.8" width="0.1016" layer="51"/>
 <wire x1="-1.1" y1="1.8" x2="1.1" y2="1.8" width="0.1016" layer="51"/>
 <wire x1="1.1" y1="1.8" x2="1.1" y2="1.6" width="0.1016" layer="51"/>
 <wire x1="-1.1" y1="-1.6" x2="-1.1" y2="-1.8" width="0.1016" layer="51"/>
 <wire x1="-1.1" y1="-1.8" x2="1.1" y2="-1.8" width="0.1016" layer="51"/>
 <wire x1="1.1" y1="-1.8" x2="1.1" y2="-1.6" width="0.1016" layer="51"/>
 <wire x1="-0.85" y1="-1.6" x2="-1.4" y2="-1.05" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="-1.05" x2="-1.4" y2="-0.65" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.1" width="0.2032" layer="51"/>
 <smd name="C" x="0" y="-2.75" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <smd name="A" x="0" y="2.75" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <text x="-2.54" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="3.81" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <text x="-0.635" y="2.54" size="1.27" layer="21">A</text>
 <text x="-0.635" y="-3.81" size="1.27" layer="21">C</text>
 <rectangle x1="-1.3" y1="-2.25" x2="1.3" y2="-0.75" layer="31"/>
 <rectangle x1="-1.3" y1="0.75" x2="1.3" y2="2.25" layer="31"/>
 <rectangle x1="-0.25" y1="-0.25" x2="0.25" y2="0.25" layer="21"/>
 <rectangle x1="-1.4" y1="0.65" x2="1.4" y2="2.35" layer="29"/>
 <rectangle x1="-1.4" y1="-2.35" x2="1.4" y2="-0.65" layer="29"/>
 </package>
 <package name="OSRAM-MINI-TOP-LED">
 <description>&lt;b&gt;BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LB M676.pdf</description>
 <wire x1="-0.6" y1="0.9" x2="-0.6" y2="-0.7" width="0.1016" layer="51"/>
 <wire x1="-0.45" y1="-0.9" x2="-0.4" y2="-0.9" width="0.1016" layer="51"/>
 <wire x1="-0.4" y1="-0.9" x2="0.6" y2="-0.9" width="0.1016" layer="51"/>
 <wire x1="0.6" y1="-0.9" x2="0.6" y2="0.9" width="0.1016" layer="51"/>
 <wire x1="0.6" y1="0.9" x2="-0.6" y2="0.9" width="0.1016" layer="51"/>
 <wire x1="-0.45" y1="0.95" x2="-0.45" y2="1.1" width="0.1016" layer="51"/>
 <wire x1="-0.45" y1="1.1" x2="0.45" y2="1.1" width="0.1016" layer="51"/>
 <wire x1="0.45" y1="1.1" x2="0.45" y2="0.95" width="0.1016" layer="51"/>
 <wire x1="-0.6" y1="-0.7" x2="-0.4" y2="-0.9" width="0.1016" layer="51"/>
 <wire x1="-0.45" y1="-0.9" x2="-0.45" y2="-1.1" width="0.1016" layer="51"/>
 <wire x1="-0.45" y1="-1.1" x2="0.45" y2="-1.1" width="0.1016" layer="51"/>
 <wire x1="0.45" y1="-1.1" x2="0.45" y2="-0.95" width="0.1016" layer="51"/>
 <smd name="A" x="0" y="2.6" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <smd name="C" x="0" y="-2.6" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <text x="-0.635" y="1.905" size="1.27" layer="21">A</text>
 <text x="-0.635" y="-3.175" size="1.27" layer="21">C</text>
 <text x="-2.54" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="3.81" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.5" y1="0.6" x2="0.5" y2="1.4" layer="31"/>
 <rectangle x1="-0.5" y1="-1.4" x2="0.5" y2="-0.6" layer="31"/>
 <rectangle x1="-0.15" y1="-0.6" x2="0.15" y2="-0.3" layer="51"/>
 <rectangle x1="-0.45" y1="0.65" x2="0.45" y2="1.35" layer="31"/>
 <rectangle x1="-0.45" y1="-1.35" x2="0.45" y2="-0.65" layer="31"/>
 </package>
 <package name="OSRAM-SIDELED">
 <description>&lt;b&gt;Super SIDELED® High-Current LED&lt;/b&gt;&lt;p&gt;
 LG A672, LP A672 &lt;br&gt;
 Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13)</description>
 <wire x1="-1.85" y1="-2.05" x2="-1.85" y2="-0.75" width="0.1016" layer="51"/>
 <wire x1="-1.85" y1="-0.75" x2="-1.7" y2="-0.75" width="0.1016" layer="51"/>
 <wire x1="-1.7" y1="-0.75" x2="-1.7" y2="0.75" width="0.1016" layer="51"/>
 <wire x1="-1.7" y1="0.75" x2="-1.85" y2="0.75" width="0.1016" layer="51"/>
 <wire x1="-1.85" y1="0.75" x2="-1.85" y2="2.05" width="0.1016" layer="51"/>
 <wire x1="-1.85" y1="2.05" x2="0.9" y2="2.05" width="0.1016" layer="51"/>
 <wire x1="0.9" y1="2.05" x2="0.9" y2="-2.05" width="0.1016" layer="51"/>
 <wire x1="0.9" y1="-2.05" x2="-1.85" y2="-2.05" width="0.1016" layer="51"/>
 <wire x1="0.9" y1="-2.05" x2="1.05" y2="-2.05" width="0.1016" layer="51"/>
 <wire x1="1.05" y1="-2.05" x2="1.85" y2="-1.85" width="0.1016" layer="51"/>
 <wire x1="1.85" y1="-1.85" x2="1.85" y2="1.85" width="0.1016" layer="51"/>
 <wire x1="1.85" y1="1.85" x2="1.05" y2="2.05" width="0.1016" layer="51"/>
 <wire x1="1.05" y1="2.05" x2="0.9" y2="2.05" width="0.1016" layer="51"/>
 <wire x1="1.05" y1="2.05" x2="1.05" y2="-2.05" width="0.1016" layer="51"/>
 <wire x1="-0.55" y1="-0.9" x2="-0.55" y2="0.9" width="0.1016" layer="51" curve="-167.319617"/>
 <wire x1="-0.55" y1="-0.9" x2="0.85" y2="-1.2" width="0.1016" layer="51" style="shortdash"/>
 <wire x1="-0.55" y1="0.9" x2="0.85" y2="1.2" width="0.1016" layer="51" style="shortdash"/>
 <smd name="C" x="0" y="-2.5" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <smd name="A" x="0" y="2.5" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <text x="0.635" y="-3.175" size="1.27" layer="21" rot="R90">C</text>
 <text x="0.635" y="2.54" size="1.27" layer="21" rot="R90">A</text>
 <text x="-2.54" y="-2.54" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="3.81" y="-2.54" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-2.1" y1="-2.2" x2="2.1" y2="-0.4" layer="29"/>
 <rectangle x1="-2.1" y1="0.4" x2="2.1" y2="2.2" layer="29"/>
 <rectangle x1="-1.9" y1="-2.1" x2="1.9" y2="-0.6" layer="31"/>
 <rectangle x1="-1.9" y1="0.6" x2="1.9" y2="2.1" layer="31"/>
 <rectangle x1="-1.85" y1="-2.05" x2="-0.7" y2="-1" layer="51"/>
 </package>
 <package name="SMART-LED">
 <description>&lt;b&gt;SmartLEDTM Hyper-Bright LED&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf</description>
 <wire x1="-0.35" y1="0.6" x2="0.35" y2="0.6" width="0.1016" layer="51" style="shortdash"/>
 <wire x1="0.35" y1="0.6" x2="0.35" y2="-0.6" width="0.1016" layer="21" style="shortdash"/>
 <wire x1="0.35" y1="-0.6" x2="-0.35" y2="-0.6" width="0.1016" layer="51" style="shortdash"/>
 <wire x1="-0.35" y1="-0.6" x2="-0.35" y2="0.6" width="0.1016" layer="21" style="shortdash"/>
 <wire x1="0.35" y1="-0.4" x2="0.15" y2="-0.6" width="0.1016" layer="51" style="shortdash"/>
 <smd name="A" x="0" y="0.725" dx="0.35" dy="0.35" layer="1"/>
 <smd name="B" x="0" y="-0.725" dx="0.35" dy="0.35" layer="1"/>
 <text x="-0.635" y="-0.635" size="1.016" layer="25" rot="R90">&gt;NAME</text>
 <text x="1.905" y="-0.635" size="1.016" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.15" y1="-0.35" x2="0.15" y2="-0.05" layer="21"/>
 <rectangle x1="-0.15" y1="0.6" x2="0.15" y2="0.85" layer="51"/>
 <rectangle x1="-0.15" y1="-0.85" x2="0.15" y2="-0.6" layer="51"/>
 </package>
 <package name="P-LCC-2-TOPLED-RG">
 <description>&lt;b&gt;Hyper TOPLED® RG Hyper-Bright LED&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf</description>
 <wire x1="-1.4" y1="-1.05" x2="-1.4" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="-1.6" x2="-1.1" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-1.1" y1="-1.6" x2="-0.85" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-0.85" y1="-1.6" x2="1.1" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="1.1" y1="-1.6" x2="1.4" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="1.4" y1="-1.6" x2="1.4" y2="1.6" width="0.2032" layer="51"/>
 <wire x1="1.4" y1="1.6" x2="-1.4" y2="1.6" width="0.2032" layer="51"/>
 <wire x1="-1.1" y1="1.6" x2="-1.1" y2="2.45" width="0.1016" layer="51"/>
 <wire x1="1.1" y1="2.45" x2="1.1" y2="1.6" width="0.1016" layer="51"/>
 <wire x1="-1.1" y1="-1.6" x2="-1.1" y2="-2.45" width="0.1016" layer="51"/>
 <wire x1="1.1" y1="-2.45" x2="1.1" y2="-1.6" width="0.1016" layer="51"/>
 <wire x1="-0.85" y1="-1.6" x2="-1.4" y2="-1.05" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="1.6" x2="-1.4" y2="-1.05" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.1" width="0.2032" layer="21"/>
 <smd name="C" x="0" y="-3.5" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <smd name="A" x="0" y="3.5" dx="4" dy="4" layer="1" stop="no" cream="no"/>
 <text x="-2.54" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="3.81" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <text x="-0.635" y="3.29" size="1.27" layer="21">A</text>
 <text x="-0.635" y="-4.56" size="1.27" layer="21">C</text>
 <rectangle x1="-1.3" y1="-3" x2="1.3" y2="-1.5" layer="31"/>
 <rectangle x1="-1.3" y1="1.5" x2="1.3" y2="3" layer="31"/>
 <rectangle x1="-0.25" y1="-0.25" x2="0.25" y2="0.25" layer="21"/>
 <rectangle x1="-1.15" y1="2.4" x2="1.15" y2="2.7" layer="51"/>
 <rectangle x1="-1.15" y1="-2.7" x2="1.15" y2="-2.4" layer="51"/>
 <rectangle x1="-1.5" y1="1.5" x2="1.5" y2="3.2" layer="29"/>
 <rectangle x1="-1.5" y1="-3.2" x2="1.5" y2="-1.5" layer="29"/>
 <hole x="0" y="0" drill="2.8"/>
 </package>
 <package name="MICRO-SIDELED">
 <description>&lt;b&gt;Hyper Micro SIDELED®&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf</description>
 <wire x1="0.65" y1="1.1" x2="-0.1" y2="1.1" width="0.1016" layer="51"/>
 <wire x1="-0.1" y1="1.1" x2="-0.35" y2="1" width="0.1016" layer="51"/>
 <wire x1="-0.35" y1="1" x2="-0.35" y2="-0.9" width="0.1016" layer="21"/>
 <wire x1="-0.35" y1="-0.9" x2="-0.1" y2="-1.1" width="0.1016" layer="51"/>
 <wire x1="-0.1" y1="-1.1" x2="0.65" y2="-1.1" width="0.1016" layer="51"/>
 <wire x1="0.65" y1="-1.1" x2="0.65" y2="1.1" width="0.1016" layer="21"/>
 <wire x1="0.6" y1="0.9" x2="0.25" y2="0.7" width="0.0508" layer="21"/>
 <wire x1="0.25" y1="0.7" x2="0.25" y2="-0.7" width="0.0508" layer="21"/>
 <wire x1="0.25" y1="-0.7" x2="0.6" y2="-0.9" width="0.0508" layer="21"/>
 <smd name="A" x="0" y="1.95" dx="1.6" dy="1.6" layer="1" stop="no" cream="no"/>
 <smd name="C" x="0" y="-1.95" dx="1.6" dy="1.6" layer="1" stop="no" cream="no"/>
 <text x="-1.27" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="2.54" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.4" y1="1.1" x2="0.4" y2="1.8" layer="29"/>
 <rectangle x1="-0.4" y1="-1.8" x2="0.4" y2="-1.1" layer="29"/>
 <rectangle x1="-0.35" y1="-1.75" x2="0.35" y2="-1.15" layer="31"/>
 <rectangle x1="-0.35" y1="1.15" x2="0.35" y2="1.75" layer="31"/>
 <rectangle x1="-0.125" y1="1.125" x2="0.125" y2="1.75" layer="51"/>
 <rectangle x1="-0.125" y1="-1.75" x2="0.125" y2="-1.125" layer="51"/>
 </package>
 <package name="P-LCC-4">
 <description>&lt;b&gt;Power TOPLED®&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf</description>
 <wire x1="-1.4" y1="1.6" x2="-1.4" y2="-0.65" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="-1.05" x2="-1.4" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="-1.6" x2="-1" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-1" y1="-1.6" x2="-0.85" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="-0.85" y1="-1.6" x2="1" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="1" y1="-1.6" x2="1.4" y2="-1.6" width="0.2032" layer="51"/>
 <wire x1="1.4" y1="-1.6" x2="1.4" y2="1.6" width="0.2032" layer="51"/>
 <wire x1="1.4" y1="1.6" x2="-1" y2="1.6" width="0.2032" layer="51"/>
 <wire x1="-1" y1="1.6" x2="-1.4" y2="1.6" width="0.2032" layer="51"/>
 <wire x1="-1" y1="1.6" x2="-1" y2="1.8" width="0.1016" layer="51"/>
 <wire x1="-1" y1="1.8" x2="-0.5" y2="1.8" width="0.1016" layer="51"/>
 <wire x1="-0.5" y1="1.8" x2="-0.5" y2="1.65" width="0.1016" layer="51"/>
 <wire x1="0.5" y1="1.65" x2="0.5" y2="1.8" width="0.1016" layer="51"/>
 <wire x1="0.5" y1="1.8" x2="1.1" y2="1.8" width="0.1016" layer="51"/>
 <wire x1="1.1" y1="1.8" x2="1.1" y2="1.6" width="0.1016" layer="51"/>
 <wire x1="-1" y1="-1.6" x2="-1" y2="-1.8" width="0.1016" layer="51"/>
 <wire x1="-1" y1="-1.8" x2="-0.5" y2="-1.8" width="0.1016" layer="51"/>
 <wire x1="-0.5" y1="-1.8" x2="-0.5" y2="-1.65" width="0.1016" layer="51"/>
 <wire x1="0.5" y1="-1.65" x2="0.5" y2="-1.8" width="0.1016" layer="51"/>
 <wire x1="0.5" y1="-1.8" x2="1" y2="-1.8" width="0.1016" layer="51"/>
 <wire x1="1" y1="-1.8" x2="1" y2="-1.6" width="0.1016" layer="51"/>
 <wire x1="-0.85" y1="-1.6" x2="-1.4" y2="-1.05" width="0.2032" layer="51"/>
 <wire x1="-1.4" y1="-1.05" x2="-1.4" y2="-0.65" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.1" width="0.2032" layer="51"/>
 <smd name="A" x="-2" y="3.15" dx="3.3" dy="4.8" layer="1" stop="no" cream="no"/>
 <smd name="C@3" x="2" y="3.15" dx="3.3" dy="4.8" layer="1" stop="no" cream="no"/>
 <smd name="C@4" x="2" y="-3.15" dx="3.3" dy="4.8" layer="1" stop="no" cream="no"/>
 <smd name="C@1" x="-2" y="-3.15" dx="3.3" dy="4.8" layer="1" stop="no" cream="no"/>
 <text x="-3.81" y="-2.54" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="5.08" y="-2.54" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <text x="-1.905" y="-3.81" size="1.27" layer="21">C</text>
 <text x="-1.905" y="2.54" size="1.27" layer="21">A</text>
 <text x="1.27" y="2.54" size="1.27" layer="21">C</text>
 <text x="1.27" y="-3.81" size="1.27" layer="21">C</text>
 <rectangle x1="-1.15" y1="0.75" x2="-0.35" y2="1.85" layer="29"/>
 <rectangle x1="0.35" y1="0.75" x2="1.15" y2="1.85" layer="29"/>
 <rectangle x1="0.35" y1="-1.85" x2="1.15" y2="-0.75" layer="29"/>
 <rectangle x1="-1.15" y1="-1.85" x2="-0.35" y2="-0.75" layer="29"/>
 <rectangle x1="-1.1" y1="-1.8" x2="-0.4" y2="-0.8" layer="31"/>
 <rectangle x1="0.4" y1="-1.8" x2="1.1" y2="-0.8" layer="31"/>
 <rectangle x1="0.4" y1="0.8" x2="1.1" y2="1.8" layer="31"/>
 <rectangle x1="-1.1" y1="0.8" x2="-0.4" y2="1.8" layer="31"/>
 <rectangle x1="-0.2" y1="-0.2" x2="0.2" y2="0.2" layer="21"/>
 </package>
 <package name="CHIP-LED0603">
 <description>&lt;b&gt;Hyper CHIPLED Hyper-Bright LED&lt;/b&gt;&lt;p&gt;
 LB Q993&lt;br&gt;
 Source: http://www.osram.convergy.de/ ... Lb_q993.pdf</description>
 <wire x1="-0.4" y1="0.45" x2="-0.4" y2="-0.45" width="0.1016" layer="51"/>
 <wire x1="0.4" y1="0.45" x2="0.4" y2="-0.45" width="0.1016" layer="51"/>
 <smd name="C" x="0" y="0.75" dx="0.8" dy="0.8" layer="1"/>
 <smd name="A" x="0" y="-0.75" dx="0.8" dy="0.8" layer="1"/>
 <text x="-0.635" y="-0.635" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="1.905" y="-0.635" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.45" y1="0.45" x2="0.45" y2="0.85" layer="51"/>
 <rectangle x1="-0.45" y1="-0.85" x2="0.45" y2="-0.45" layer="51"/>
 <rectangle x1="-0.45" y1="0" x2="-0.3" y2="0.3" layer="21"/>
 <rectangle x1="0.3" y1="0" x2="0.45" y2="0.3" layer="21"/>
 <rectangle x1="-0.15" y1="0" x2="0.15" y2="0.3" layer="21"/>
 </package>
 <package name="CHIP-LED0805">
 <description>&lt;b&gt;Hyper CHIPLED Hyper-Bright LED&lt;/b&gt;&lt;p&gt;
 LB R99A&lt;br&gt;
 Source: http://www.osram.convergy.de/ ... lb_r99a.pdf</description>
 <wire x1="-0.625" y1="0.45" x2="-0.625" y2="-0.45" width="0.1016" layer="51"/>
 <wire x1="0.625" y1="0.45" x2="0.625" y2="-0.475" width="0.1016" layer="51"/>
 <smd name="C" x="0" y="1.05" dx="1.2" dy="1.2" layer="1"/>
 <smd name="A" x="0" y="-1.05" dx="1.2" dy="1.2" layer="1"/>
 <text x="-1.27" y="-1.27" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="2.54" y="-1.27" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <text x="-1.27" y="-2.54" size="1.016" layer="21" font="vector">+</text>
 <rectangle x1="-0.675" y1="0" x2="-0.525" y2="0.3" layer="21"/>
 <rectangle x1="0.525" y1="0" x2="0.675" y2="0.3" layer="21"/>
 <rectangle x1="-0.15" y1="0" x2="0.15" y2="0.3" layer="21"/>
 <rectangle x1="-0.675" y1="0.45" x2="0.675" y2="1.05" layer="51"/>
 <rectangle x1="-0.675" y1="-1.05" x2="0.675" y2="-0.45" layer="51"/>
 </package>
 <package name="MINI-TOPLED-SANTANA">
 <description>&lt;b&gt;Mini TOPLED Santana®&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LG M470.pdf</description>
 <wire x1="0.7" y1="-1" x2="0.35" y2="-1" width="0.1016" layer="21"/>
 <wire x1="0.35" y1="-1" x2="-0.45" y2="-1" width="0.1016" layer="21"/>
 <wire x1="-0.45" y1="-1" x2="-0.7" y2="-1" width="0.1016" layer="21"/>
 <wire x1="-0.7" y1="-1" x2="-0.7" y2="-0.75" width="0.1016" layer="21"/>
 <wire x1="-0.7" y1="-0.75" x2="-0.7" y2="1" width="0.1016" layer="21"/>
 <wire x1="-0.7" y1="1" x2="0.7" y2="1" width="0.1016" layer="21"/>
 <wire x1="0.7" y1="1" x2="0.7" y2="-0.65" width="0.1016" layer="21"/>
 <wire x1="0.7" y1="-0.65" x2="0.7" y2="-1" width="0.1016" layer="21"/>
 <wire x1="0.45" y1="-0.7" x2="-0.45" y2="-0.7" width="0.1016" layer="21"/>
 <wire x1="-0.45" y1="-0.7" x2="-0.45" y2="0.7" width="0.1016" layer="21"/>
 <wire x1="-0.45" y1="0.7" x2="0.45" y2="0.7" width="0.1016" layer="21"/>
 <wire x1="0.45" y1="0.7" x2="0.45" y2="-0.7" width="0.1016" layer="21"/>
 <wire x1="0.7" y1="-0.65" x2="0.35" y2="-1" width="0.1016" layer="21"/>
 <smd name="C" x="0" y="-2.2" dx="1.6" dy="1.6" layer="1" stop="no" cream="no"/>
 <smd name="A" x="0" y="2.2" dx="1.6" dy="1.6" layer="1" stop="no" cream="no"/>
 <text x="-1.27" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="2.54" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.55" y1="1.5" x2="0.55" y2="2.1" layer="29"/>
 <rectangle x1="-0.55" y1="-2.1" x2="0.55" y2="-1.5" layer="29"/>
 <rectangle x1="-0.5" y1="-2.05" x2="0.5" y2="-1.55" layer="31"/>
 <rectangle x1="-0.5" y1="1.55" x2="0.5" y2="2.05" layer="31"/>
 <rectangle x1="-0.2" y1="-0.4" x2="0.15" y2="-0.05" layer="21"/>
 <rectangle x1="-0.5" y1="-2.1" x2="0.5" y2="-1.4" layer="51"/>
 <rectangle x1="-0.5" y1="1.4" x2="0.5" y2="2.05" layer="51"/>
 <rectangle x1="-0.5" y1="1" x2="0.5" y2="1.4" layer="21"/>
 <rectangle x1="-0.5" y1="-1.4" x2="0.5" y2="-1.05" layer="21"/>
 <hole x="0" y="0" drill="2.7"/>
 </package>
 <package name="CHIPLED_0805">
 <description>&lt;b&gt;CHIPLED&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LG_R971.pdf</description>
 <wire x1="-0.35" y1="1" x2="0.35" y2="1" width="0.1016" layer="51" curve="180" cap="flat"/>
 <wire x1="-0.35" y1="-1" x2="0.35" y2="-1" width="0.1016" layer="51" curve="-180" cap="flat"/>
 <wire x1="0.575" y1="0.525" x2="0.575" y2="-0.525" width="0.1016" layer="51"/>
 <wire x1="-0.575" y1="-0.5" x2="-0.575" y2="0.925" width="0.1016" layer="51"/>
 <circle x="-0.45" y="0.85" radius="0.103" width="0.1016" layer="51"/>
 <smd name="C" x="0" y="1.05" dx="1.2" dy="1.2" layer="1"/>
 <smd name="A" x="0" y="-1.05" dx="1.2" dy="1.2" layer="1"/>
 <text x="-1.27" y="-1.27" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="2.54" y="-1.27" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="0.3" y1="0.5" x2="0.625" y2="1" layer="51"/>
 <rectangle x1="-0.325" y1="0.5" x2="-0.175" y2="0.75" layer="51"/>
 <rectangle x1="0.175" y1="0.5" x2="0.325" y2="0.75" layer="51"/>
 <rectangle x1="-0.2" y1="0.5" x2="0.2" y2="0.675" layer="51"/>
 <rectangle x1="0.3" y1="-1" x2="0.625" y2="-0.5" layer="51"/>
 <rectangle x1="-0.625" y1="-1" x2="-0.3" y2="-0.5" layer="51"/>
 <rectangle x1="0.175" y1="-0.75" x2="0.325" y2="-0.5" layer="51"/>
 <rectangle x1="-0.325" y1="-0.75" x2="-0.175" y2="-0.5" layer="51"/>
 <rectangle x1="-0.2" y1="-0.675" x2="0.2" y2="-0.5" layer="51"/>
 <rectangle x1="-0.1" y1="0" x2="0.1" y2="0.2" layer="21"/>
 <rectangle x1="-0.6" y1="0.5" x2="-0.3" y2="0.8" layer="51"/>
 <rectangle x1="-0.625" y1="0.925" x2="-0.4" y2="1" layer="51"/>
 </package>
 <package name="CHIPLED_1206">
 <description>&lt;b&gt;CHIPLED&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf</description>
 <wire x1="-0.4" y1="1.625" x2="0.4" y2="1.625" width="0.1016" layer="51" curve="180" cap="flat"/>
 <wire x1="-0.8" y1="-0.95" x2="-0.8" y2="0.95" width="0.1016" layer="51"/>
 <wire x1="0.8" y1="0.95" x2="0.8" y2="-0.95" width="0.1016" layer="51"/>
 <circle x="-0.55" y="1.425" radius="0.1" width="0.1016" layer="51"/>
 <smd name="C" x="0" y="1.75" dx="1.5" dy="1.5" layer="1"/>
 <smd name="A" x="0" y="-1.75" dx="1.5" dy="1.5" layer="1"/>
 <text x="-1.27" y="-1.27" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="2.54" y="-1.27" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.85" y1="1.525" x2="-0.35" y2="1.65" layer="51"/>
 <rectangle x1="-0.85" y1="1.225" x2="-0.625" y2="1.55" layer="51"/>
 <rectangle x1="-0.45" y1="1.225" x2="-0.325" y2="1.45" layer="51"/>
 <rectangle x1="-0.65" y1="1.225" x2="-0.225" y2="1.35" layer="51"/>
 <rectangle x1="0.35" y1="1.3" x2="0.85" y2="1.65" layer="51"/>
 <rectangle x1="0.25" y1="1.225" x2="0.85" y2="1.35" layer="51"/>
 <rectangle x1="-0.85" y1="0.95" x2="0.85" y2="1.25" layer="51"/>
 <rectangle x1="-0.85" y1="-1.65" x2="0.85" y2="-0.95" layer="51"/>
 <rectangle x1="-0.85" y1="0.35" x2="-0.525" y2="0.775" layer="21"/>
 <rectangle x1="0.525" y1="0.35" x2="0.85" y2="0.775" layer="21"/>
 <rectangle x1="-0.175" y1="0" x2="0.175" y2="0.35" layer="21"/>
 </package>
 <package name="CHIPLED_0603">
 <description>&lt;b&gt;CHIPLED&lt;/b&gt;&lt;p&gt;
 Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf</description>
 <wire x1="-0.3" y1="0.825" x2="0.3" y2="0.825" width="0.1016" layer="51" curve="180" cap="flat"/>
 <wire x1="-0.275" y1="-0.825" x2="0.275" y2="-0.825" width="0.0508" layer="51" curve="-180" cap="flat"/>
 <wire x1="-0.4" y1="0.375" x2="-0.4" y2="-0.35" width="0.1016" layer="51"/>
 <wire x1="0.4" y1="0.35" x2="0.4" y2="-0.35" width="0.1016" layer="51"/>
 <circle x="-0.35" y="0.625" radius="0.075" width="0.0508" layer="51"/>
 <smd name="C" x="0" y="0.75" dx="0.8" dy="0.8" layer="1"/>
 <smd name="A" x="0" y="-0.75" dx="0.8" dy="0.8" layer="1"/>
 <text x="-0.635" y="-1.27" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="1.905" y="-1.27" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.45" y1="0.7" x2="-0.25" y2="0.85" layer="51"/>
 <rectangle x1="-0.275" y1="0.55" x2="-0.225" y2="0.6" layer="51"/>
 <rectangle x1="-0.45" y1="0.35" x2="-0.4" y2="0.725" layer="51"/>
 <rectangle x1="0.25" y1="0.55" x2="0.45" y2="0.85" layer="51"/>
 <rectangle x1="-0.45" y1="0.35" x2="0.45" y2="0.575" layer="51"/>
 <rectangle x1="-0.45" y1="-0.85" x2="-0.25" y2="-0.35" layer="51"/>
 <rectangle x1="0.25" y1="-0.85" x2="0.45" y2="-0.35" layer="51"/>
 <rectangle x1="-0.275" y1="-0.575" x2="0.275" y2="-0.35" layer="51"/>
 <rectangle x1="-0.275" y1="-0.65" x2="-0.175" y2="-0.55" layer="51"/>
 <rectangle x1="0.175" y1="-0.65" x2="0.275" y2="-0.55" layer="51"/>
 <rectangle x1="-0.125" y1="0" x2="0.125" y2="0.25" layer="21"/>
 </package>
 <package name="CHIPLED-0603-TTW">
 <description>&lt;b&gt;CHIPLED-0603&lt;/b&gt;&lt;p&gt;
 Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603&lt;br&gt;
 Package able to withstand TTW-soldering heat&lt;br&gt;
 Package suitable for TTW-soldering&lt;br&gt;
 Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf</description>
 <wire x1="-0.3" y1="0.825" x2="0.3" y2="0.825" width="0.1016" layer="51" curve="180" cap="flat"/>
 <wire x1="-0.275" y1="-0.825" x2="0.275" y2="-0.825" width="0.0508" layer="51" curve="-180" cap="flat"/>
 <wire x1="-0.4" y1="0.375" x2="-0.4" y2="-0.35" width="0.1016" layer="51"/>
 <wire x1="0.4" y1="0.35" x2="0.4" y2="-0.35" width="0.1016" layer="51"/>
 <circle x="-0.35" y="0.625" radius="0.075" width="0.0508" layer="51"/>
 <smd name="C" x="0" y="0.875" dx="0.8" dy="0.5" layer="1" stop="no" cream="no"/>
 <smd name="A" x="0" y="-0.875" dx="0.8" dy="0.5" layer="1" stop="no" cream="no"/>
 <smd name="A@1" x="0" y="-0.5" dx="0.35" dy="0.35" layer="1"/>
 <smd name="C@1" x="0" y="0.5" dx="0.35" dy="0.35" layer="1"/>
 <text x="-0.635" y="-1.27" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="1.905" y="-1.27" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.45" y1="0.7" x2="-0.25" y2="0.85" layer="51"/>
 <rectangle x1="-0.275" y1="0.55" x2="-0.225" y2="0.6" layer="51"/>
 <rectangle x1="-0.45" y1="0.35" x2="-0.4" y2="0.725" layer="51"/>
 <rectangle x1="0.25" y1="0.55" x2="0.45" y2="0.85" layer="51"/>
 <rectangle x1="-0.45" y1="0.35" x2="0.45" y2="0.575" layer="51"/>
 <rectangle x1="-0.45" y1="-0.85" x2="-0.25" y2="-0.35" layer="51"/>
 <rectangle x1="0.25" y1="-0.85" x2="0.45" y2="-0.35" layer="51"/>
 <rectangle x1="-0.275" y1="-0.575" x2="0.275" y2="-0.35" layer="51"/>
 <rectangle x1="-0.275" y1="-0.65" x2="-0.175" y2="-0.55" layer="51"/>
 <rectangle x1="0.175" y1="-0.65" x2="0.275" y2="-0.55" layer="51"/>
 <rectangle x1="-0.125" y1="0" x2="0.125" y2="0.25" layer="21"/>
 <rectangle x1="-0.175" y1="0.325" x2="0.175" y2="0.7" layer="29"/>
 <rectangle x1="-0.4" y1="0.625" x2="0.4" y2="1.125" layer="29"/>
 <rectangle x1="-0.4" y1="-1.125" x2="0.4" y2="-0.625" layer="29"/>
 <rectangle x1="-0.175" y1="-0.675" x2="0.175" y2="-0.325" layer="29"/>
 </package>
 <package name="SMARTLED-TTW">
 <description>&lt;b&gt;SmartLED TTW&lt;/b&gt;&lt;p&gt;
 Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603&lt;br&gt;
 Package able to withstand TTW-soldering heat&lt;br&gt;
 Package suitable for TTW-soldering&lt;br&gt;
 Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf</description>
 <wire x1="-0.35" y1="0.6" x2="0.35" y2="0.6" width="0.1016" layer="51" style="shortdash"/>
 <wire x1="0.35" y1="0.6" x2="0.35" y2="-0.6" width="0.1016" layer="21" style="shortdash"/>
 <wire x1="0.35" y1="-0.6" x2="-0.35" y2="-0.6" width="0.1016" layer="51" style="shortdash"/>
 <wire x1="-0.35" y1="-0.6" x2="-0.35" y2="0.6" width="0.1016" layer="21" style="shortdash"/>
 <wire x1="0.35" y1="-0.4" x2="0.15" y2="-0.6" width="0.1016" layer="51" style="shortdash"/>
 <smd name="C" x="0" y="0.875" dx="0.8" dy="0.5" layer="1" stop="no" cream="no"/>
 <smd name="A" x="0" y="-0.875" dx="0.8" dy="0.5" layer="1" stop="no" cream="no"/>
 <smd name="A@1" x="0" y="-0.5" dx="0.35" dy="0.35" layer="1" stop="no" cream="no"/>
 <smd name="C@1" x="0" y="0.5" dx="0.35" dy="0.35" layer="1" stop="no" cream="no"/>
 <text x="-0.635" y="-1.27" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="1.905" y="-1.27" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.175" y1="0.325" x2="0.175" y2="0.7" layer="29"/>
 <rectangle x1="-0.15" y1="-0.35" x2="0.15" y2="-0.05" layer="21"/>
 <rectangle x1="-0.15" y1="0.6" x2="0.15" y2="0.85" layer="51"/>
 <rectangle x1="-0.15" y1="-0.85" x2="0.15" y2="-0.6" layer="51"/>
 <rectangle x1="-0.225" y1="0.3" x2="0.225" y2="0.975" layer="31"/>
 <rectangle x1="-0.175" y1="-0.7" x2="0.175" y2="-0.325" layer="29" rot="R180"/>
 <rectangle x1="-0.225" y1="-0.975" x2="0.225" y2="-0.3" layer="31" rot="R180"/>
 </package>
 <package name="SMLK34">
 <wire x1="-2" y1="1" x2="1.7" y2="1" width="0.127" layer="21"/>
 <wire x1="1.7" y1="1" x2="2" y2="0.7" width="0.127" layer="21"/>
 <wire x1="2" y1="0.7" x2="2" y2="-1" width="0.127" layer="21"/>
 <wire x1="2" y1="-1" x2="-2" y2="-1" width="0.127" layer="21"/>
 <wire x1="-2" y1="-1" x2="-2" y2="1" width="0.127" layer="21"/>
 <wire x1="-1.8" y1="0.8" x2="-1.8" y2="-0.8" width="0.127" layer="25"/>
 <wire x1="-1.8" y1="-0.8" x2="1.8" y2="-0.8" width="0.127" layer="25"/>
 <wire x1="1.8" y1="-0.8" x2="1.8" y2="0.6" width="0.127" layer="25"/>
 <wire x1="1.8" y1="0.6" x2="1.6" y2="0.8" width="0.127" layer="25"/>
 <wire x1="1.6" y1="0.8" x2="-1.8" y2="0.8" width="0.127" layer="25"/>
 <smd name="A" x="0.9" y="0" dx="3.65" dy="1.74" layer="1" rot="R180"/>
 <smd name="K" x="-2.1" y="0" dx="1.35" dy="1.74" layer="1" rot="R180"/>
 <text x="-2.8" y="-3.97" size="1.27" layer="25" font="vector">&gt;NAME</text>
 <text x="-2.8" y="-5.37" size="1.27" layer="27" font="vector">&gt;VALUE</text>
 <text x="1.73" y="-2.178" size="1.016" layer="21" font="vector">A</text>
 <text x="-2.938" y="-2.178" size="1.016" layer="21" font="vector">K</text>
 </package>
 </packages>
 <symbols>
 <symbol name="LED">
 <wire x1="1.27" y1="0" x2="0" y2="-2.54" width="0.254" layer="94"/>
 <wire x1="0" y1="-2.54" x2="-1.27" y2="0" width="0.254" layer="94"/>
 <wire x1="1.27" y1="-2.54" x2="0" y2="-2.54" width="0.254" layer="94"/>
 <wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.254" layer="94"/>
 <wire x1="1.27" y1="0" x2="0" y2="0" width="0.254" layer="94"/>
 <wire x1="0" y1="0" x2="-1.27" y2="0" width="0.254" layer="94"/>
 <wire x1="0" y1="0" x2="0" y2="-2.54" width="0.1524" layer="94"/>
 <wire x1="-2.032" y1="-0.762" x2="-3.429" y2="-2.159" width="0.1524" layer="94"/>
 <wire x1="-1.905" y1="-1.905" x2="-3.302" y2="-3.302" width="0.1524" layer="94"/>
 <text x="3.556" y="-4.572" size="1.778" layer="95" rot="R90">&gt;NAME</text>
 <text x="5.715" y="-4.572" size="1.778" layer="96" rot="R90">&gt;VALUE</text>
 <pin name="C" x="0" y="-5.08" visible="off" length="short" direction="pas" rot="R90"/>
 <pin name="A" x="0" y="2.54" visible="off" length="short" direction="pas" rot="R270"/>
 <polygon width="0.1524" layer="94">
 <vertex x="-3.429" y="-2.159"/>
 <vertex x="-3.048" y="-1.27"/>
 <vertex x="-2.54" y="-1.778"/>
 </polygon>
 <polygon width="0.1524" layer="94">
 <vertex x="-3.302" y="-3.302"/>
 <vertex x="-2.921" y="-2.413"/>
 <vertex x="-2.413" y="-2.921"/>
 </polygon>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="LED" prefix="LED" uservalue="yes">
 <description>&lt;b&gt;LED&lt;/b&gt;&lt;p&gt;
 &lt;u&gt;OSRAM&lt;/u&gt;:&lt;br&gt;
 - &lt;u&gt;CHIPLED&lt;/u&gt;&lt;br&gt;
 LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971
 LH N974, LH R974&lt;br&gt;
 LS Q976, LO Q976, LY Q976&lt;br&gt;
 LO Q996&lt;br&gt;
 - &lt;u&gt;Hyper CHIPLED&lt;/u&gt;&lt;br&gt;
 LW Q18S&lt;br&gt;
 LB Q993, LB Q99A, LB R99A&lt;br&gt;
 - &lt;u&gt;SideLED&lt;/u&gt;&lt;br&gt;
 LS A670, LO A670, LY A670, LG A670, LP A670&lt;br&gt;
 LB A673, LV A673, LT A673, LW A673&lt;br&gt;
 LH A674&lt;br&gt;
 LY A675&lt;br&gt;
 LS A676, LA A676, LO A676, LY A676, LW A676&lt;br&gt;
 LS A679, LY A679, LG A679&lt;br&gt;
 -  &lt;u&gt;Hyper Micro SIDELED®&lt;/u&gt;&lt;br&gt;
 LS Y876, LA Y876, LO Y876, LY Y876&lt;br&gt;
 LT Y87S&lt;br&gt;
 - &lt;u&gt;SmartLED&lt;/u&gt;&lt;br&gt;
 LW L88C, LW L88S&lt;br&gt;
 LB L89C, LB L89S, LG L890&lt;br&gt;
 LS L89K, LO L89K, LY L89K&lt;br&gt;
 LS L896, LA L896, LO L896, LY L896&lt;br&gt;
 - &lt;u&gt;TOPLED&lt;/u&gt;&lt;br&gt;
 LS T670, LO T670, LY T670, LG T670, LP T670&lt;br&gt;
 LSG T670, LSP T670, LSY T670, LOP T670, LYG T670&lt;br&gt;
 LG T671, LOG T671, LSG T671&lt;br&gt;
 LB T673, LV T673, LT T673, LW T673&lt;br&gt;
 LH T674&lt;br&gt;
 LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676&lt;br&gt;
 LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C&lt;br&gt;
 LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C&lt;br&gt;
 LW T67C&lt;br&gt;
 LS T679, LY T679, LG T679&lt;br&gt;
 LS T770, LO T770, LY T770, LG T770, LP T770&lt;br&gt;
 LB T773, LV T773, LT T773, LW T773&lt;br&gt;
 LH T774&lt;br&gt;
 LS E675, LA E675, LY E675, LS T675&lt;br&gt;
 LS T776, LA T776, LO T776, LY T776, LB T776&lt;br&gt;
 LHGB T686&lt;br&gt;
 LT T68C, LB T68C&lt;br&gt;
 - &lt;u&gt;Hyper Mini TOPLED®&lt;/u&gt;&lt;br&gt;
 LB M676&lt;br&gt;
 - &lt;u&gt;Mini TOPLED Santana®&lt;/u&gt;&lt;br&gt;
 LG M470&lt;br&gt;
 LS M47K, LO M47K, LY M47K&lt;br&gt;
 &lt;p&gt;
 Source: http://www.osram.convergy.de/</description>
 <gates>
 <gate name="G$1" symbol="LED" x="0" y="0"/>
 </gates>
 <devices>
 <device name="SMT1206" package="1206">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="LD260" package="LD260">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SQR2X5" package="LED2X5">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="3MM" package="LED3MM">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="5MM" package="LED5MM">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="LSU260" package="LSU260">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="LZR181" package="LZR181">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="B152" package="Q62902-B152">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="B153" package="Q62902-B153">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="B155" package="Q62902-B155">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="B156" package="Q62902-B156">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SFH480" package="SFH480">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SFH482" package="SFH482">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SQR5.7X3.2" package="U57X32">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="IRL80A" package="IRL80A">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="P-LCC-2" package="P-LCC-2">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="MINI-TOP" package="OSRAM-MINI-TOP-LED">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SIDELED" package="OSRAM-SIDELED">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SMART-LED" package="SMART-LED">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="B"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="P-LCC-2-BACK" package="P-LCC-2-TOPLED-RG">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="MICRO-SIDELED" package="MICRO-SIDELED">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="P-LCC-4" package="P-LCC-4">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C@4"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="CHIP-LED0603" package="CHIP-LED0603">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="CHIP-LED0805" package="CHIP-LED0805">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="TOPLED-SANTANA" package="MINI-TOPLED-SANTANA">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="CHIPLED_0805" package="CHIPLED_0805">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="CHIPLED_1206" package="CHIPLED_1206">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="CHIPLED_0603" package="CHIPLED_0603">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="CHIPLED-0603-TTW" package="CHIPLED-0603-TTW">
 <connects>
 <connect gate="G$1" pin="A" pad="A@1"/>
 <connect gate="G$1" pin="C" pad="C@1"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="" package="SMARTLED-TTW">
 <connects>
 <connect gate="G$1" pin="A" pad="A@1"/>
 <connect gate="G$1" pin="C" pad="C@1"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SMLK34" package="SMLK34">
 <connects>
 <connect gate="G$1" pin="A" pad="A"/>
 <connect gate="G$1" pin="C" pad="K"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 </libraries>
 <attributes>
 </attributes>
@@ @@ -682,6 +2253,15 @@ Standard 10-pin 0.1" header. Use with st @@
 <part name="J1" library="SLAT-CON-JST-ZH" deviceset="ZH-H-2-1" device=""/>
 <part name="J2" library="SLAT-CON-JST-ZH" deviceset="ZH-H-2-1" device=""/>
 <part name="J3" library="SLAT-CON-JST-ZH" deviceset="ZH-H-2-1" device=""/>
 <part name="LED1" library="adafruit" deviceset="LED" device="CHIPLED_0603" value="GREEN"/>
 <part name="R1" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="10K"/>
 <part name="GND5" library="SparkFun" deviceset="GND" device=""/>
 <part name="LED2" library="adafruit" deviceset="LED" device="CHIPLED_0603" value="VIOLET"/>
 <part name="R2" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="10K"/>
 <part name="GND6" library="SparkFun" deviceset="GND" device=""/>
 <part name="LED3" library="adafruit" deviceset="LED" device="CHIPLED_0603" value="RED"/>
 <part name="R3" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="10K"/>
 <part name="GND7" library="SparkFun" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
@@ @@ -693,6 +2273,9 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="60.96" y1="93.98" x2="121.92" y2="93.98" width="0.4064" layer="94"/>
 <wire x1="121.92" y1="93.98" x2="121.92" y2="185.42" width="0.4064" layer="94"/>
 <text x="71.12" y="175.26" size="6.4516" layer="94">Cameras</text>
 <text x="142.24" y="175.26" size="6.4516" layer="94">LEDs</text>
 <wire x1="121.92" y1="93.98" x2="177.8" y2="93.98" width="0.4064" layer="94"/>
 <wire x1="177.8" y1="93.98" x2="177.8" y2="185.42" width="0.4064" layer="94"/>
 </plain>
 <instances>
 <instance part="FRAME1" gate="G$1" x="0" y="0"/>
@@ @@ -707,6 +2290,15 @@ Standard 10-pin 0.1" header. Use with st @@
 <instance part="J1" gate="G$1" x="81.28" y="160.02"/>
 <instance part="J2" gate="G$1" x="81.28" y="134.62"/>
 <instance part="J3" gate="G$1" x="81.28" y="109.22"/>
 <instance part="LED1" gate="G$1" x="137.16" y="124.46"/>
 <instance part="R1" gate="G$1" x="137.16" y="137.16" rot="R90"/>
 <instance part="GND5" gate="1" x="137.16" y="114.3"/>
 <instance part="LED2" gate="G$1" x="149.86" y="124.46"/>
 <instance part="R2" gate="G$1" x="149.86" y="137.16" rot="R90"/>
 <instance part="GND6" gate="1" x="149.86" y="114.3"/>
 <instance part="LED3" gate="G$1" x="162.56" y="124.46"/>
 <instance part="R3" gate="G$1" x="162.56" y="137.16" rot="R90"/>
 <instance part="GND7" gate="1" x="162.56" y="114.3"/>
 </instances>
 <busses>
 </busses>
@@ @@ -737,6 +2329,21 @@ Standard 10-pin 0.1" header. Use with st @@
 <pinref part="J3" gate="G$1" pin="2"/>
 <wire x1="86.36" y1="109.22" x2="96.52" y2="109.22" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="LED1" gate="G$1" pin="C"/>
 <pinref part="GND5" gate="1" pin="GND"/>
 <wire x1="137.16" y1="116.84" x2="137.16" y2="119.38" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="LED2" gate="G$1" pin="C"/>
 <pinref part="GND6" gate="1" pin="GND"/>
 <wire x1="149.86" y1="116.84" x2="149.86" y2="119.38" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="LED3" gate="G$1" pin="C"/>
 <pinref part="GND7" gate="1" pin="GND"/>
 <wire x1="162.56" y1="116.84" x2="162.56" y2="119.38" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="VBAT" class="0">
 <segment>
@@ @@ -828,6 +2435,11 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="86.36" y1="162.56" x2="96.52" y2="162.56" width="0.1524" layer="91"/>
 <label x="91.44" y="162.56" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="R1" gate="G$1" pin="2"/>
 <wire x1="137.16" y1="142.24" x2="137.16" y2="154.94" width="0.1524" layer="91"/>
 <label x="137.16" y="152.4" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA1" class="0">
 <segment>
@@ @@ -840,6 +2452,11 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="86.36" y1="137.16" x2="96.52" y2="137.16" width="0.1524" layer="91"/>
 <label x="91.44" y="137.16" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="R2" gate="G$1" pin="2"/>
 <wire x1="149.86" y1="142.24" x2="149.86" y2="154.94" width="0.1524" layer="91"/>
 <label x="149.86" y="152.4" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA2" class="0">
 <segment>
@@ @@ -852,6 +2469,11 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="86.36" y1="111.76" x2="96.52" y2="111.76" width="0.1524" layer="91"/>
 <label x="91.44" y="111.76" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="R3" gate="G$1" pin="2"/>
 <wire x1="162.56" y1="142.24" x2="162.56" y2="154.94" width="0.1524" layer="91"/>
 <label x="162.56" y="152.4" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA3" class="0">
 <segment>
@@ @@ -888,6 +2510,27 @@ Standard 10-pin 0.1" header. Use with st @@
 <label x="27.94" y="127" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="N$2" class="0">
 <segment>
 <pinref part="LED1" gate="G$1" pin="A"/>
 <pinref part="R1" gate="G$1" pin="1"/>
 <wire x1="137.16" y1="132.08" x2="137.16" y2="127" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$4" class="0">
 <segment>
 <pinref part="LED2" gate="G$1" pin="A"/>
 <pinref part="R2" gate="G$1" pin="1"/>
 <wire x1="149.86" y1="132.08" x2="149.86" y2="127" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$6" class="0">
 <segment>
 <pinref part="LED3" gate="G$1" pin="A"/>
 <pinref part="R3" gate="G$1" pin="1"/>
 <wire x1="162.56" y1="132.08" x2="162.56" y2="127" width="0.1524" layer="91"/>
 </segment>
 </net>
 </nets>
 </sheet>
 </sheets>

slave-daughter/slave-daughter-sensors.brd

➞

Show inline comments

@@ @@ -568,32 +568,16 @@ Please make sure your boards conform to @@
 <contactref element="IC2" pad="1"/>
 <contactref element="C4" pad="2"/>
 <contactref element="U$3" pad="1"/>
 <wire x1="24.003" y1="20.281" x2="24.003" y2="20.32" width="0.4064" layer="1"/>
 <wire x1="24.003" y1="20.32" x2="24.765" y2="21.082" width="0.4064" layer="1"/>
 <wire x1="24.765" y1="21.082" x2="24.765" y2="22.8" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="29.21" x2="10.541" y2="29.21" width="0.4064" layer="1"/>
 <wire x1="10.541" y1="29.21" x2="5.08" y2="34.671" width="0.4064" layer="1"/>
 <wire x1="5.08" y1="34.671" x2="5.08" y2="36.957" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="29.21" x2="10.668" y2="29.21" width="0.4064" layer="1"/>
 <wire x1="10.668" y1="29.21" x2="10.668" y2="26.758" width="0.4064" layer="1"/>
 <wire x1="10.668" y1="26.758" x2="10.58" y2="26.67" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="26.67" x2="10.58" y2="24.13" width="0.4064" layer="1"/>
 <wire x1="9.23" y1="21.46" x2="9.89" y2="21.46" width="0.4064" layer="1"/>
 <wire x1="9.89" y1="21.46" x2="9.89" y2="23.44" width="0.4064" layer="1"/>
 <wire x1="9.89" y1="23.44" x2="10.58" y2="24.13" width="0.4064" layer="1"/>
 <wire x1="24.003" y1="20.32" x2="23.114" y2="21.209" width="0.4064" layer="1"/>
 <wire x1="23.114" y1="21.209" x2="23.114" y2="22.86" width="0.4064" layer="1"/>
 <wire x1="23.114" y1="22.86" x2="20.447" y2="25.527" width="0.4064" layer="1"/>
 <wire x1="20.447" y1="25.527" x2="16.637" y2="25.527" width="0.4064" layer="1"/>
 <wire x1="16.637" y1="25.527" x2="15.875" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="15.875" y1="24.765" x2="15.875" y2="22.8" width="0.4064" layer="1"/>
 <wire x1="15.875" y1="22.8" x2="15.875" y2="21.971" width="0.4064" layer="1"/>
 <wire x1="13.589" y1="21.717" x2="12.319" y2="22.987" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="24.13" x2="10.58" y2="23.964" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="23.964" x2="11.557" y2="22.987" width="0.4064" layer="1"/>
 <wire x1="11.557" y1="22.987" x2="12.319" y2="22.987" width="0.4064" layer="1"/>
 <wire x1="14.445" y1="17.78" x2="13.97" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="13.97" y1="17.78" x2="13.208" y2="18.542" width="0.4064" layer="1"/>
 <via x="13.208" y="18.542" extent="1-16" drill="0.254"/>
 <wire x1="13.208" y1="18.542" x2="13.208" y2="20.955" width="0.4064" layer="16"/>
 <via x="13.208" y="20.955" extent="1-16" drill="0.254"/>
@@ @@ -602,6 +586,19 @@ Please make sure your boards conform to @@
 <wire x1="15.875" y1="21.971" x2="15.113" y2="21.209" width="0.4064" layer="1"/>
 <wire x1="15.113" y1="21.209" x2="14.097" y2="21.209" width="0.4064" layer="1"/>
 <wire x1="14.097" y1="21.209" x2="13.589" y2="21.717" width="0.4064" layer="1"/>
 <polygon width="0.4064" layer="1" isolate="0.254">
 <vertex x="-2.794" y="41.783"/>
 <vertex x="38.608" y="41.783"/>
 <vertex x="38.608" y="-3.937"/>
 <vertex x="-2.921" y="-3.937"/>
 <vertex x="-2.921" y="42.037"/>
 </polygon>
 <polygon width="0.4064" layer="16" isolate="0.254">
 <vertex x="-3.429" y="40.894"/>
 <vertex x="38.1" y="40.894"/>
 <vertex x="38.1" y="-1.397"/>
 <vertex x="-3.429" y="-1.397"/>
 </polygon>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
@@ @@ -730,7 +727,8 @@ Please make sure your boards conform to @@
 <contactref element="U$1" pad="4"/>
 <contactref element="U$2" pad="6"/>
 <contactref element="U$3" pad="7"/>
 <wire x1="18.415" y1="22.8" x2="18.415" y2="17.94" width="0.4064" layer="1"/>
 <wire x1="18.415" y1="22.8" x2="18.415" y2="20.447" width="0.4064" layer="1"/>
 <wire x1="18.415" y1="20.447" x2="18.415" y2="17.94" width="0.4064" layer="1"/>
 <wire x1="18.415" y1="17.94" x2="18.575" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="10.55" y1="19.7" x2="10.55" y2="5.343" width="0.4064" layer="1"/>
 <wire x1="10.55" y1="5.343" x2="7.62" y2="2.413" width="0.4064" layer="1"/>
@@ @@ -741,11 +739,8 @@ Please make sure your boards conform to @@
 <via x="14.478" y="20.447" extent="1-16" drill="0.254"/>
 <wire x1="14.478" y1="20.447" x2="17.018" y2="20.447" width="0.4064" layer="16"/>
 <via x="17.018" y="20.447" extent="1-16" drill="0.254"/>
 <wire x1="17.018" y1="20.447" x2="17.399" y2="20.066" width="0.4064" layer="1"/>
 <wire x1="17.399" y1="20.066" x2="17.399" y2="18.542" width="0.4064" layer="1"/>
 <wire x1="17.399" y1="18.542" x2="17.907" y2="18.034" width="0.4064" layer="1"/>
 <wire x1="17.907" y1="18.034" x2="18.321" y2="18.034" width="0.4064" layer="1"/>
 <wire x1="18.321" y1="18.034" x2="18.575" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="17.018" y1="20.447" x2="18.415" y2="20.447" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA0">
 <contactref element="JP2" pad="3"/>
@@ @@ -816,6 +811,30 @@ Please make sure your boards conform to @@
 </signal>
 <signal name="N$2">
 </signal>
 <signal name="N$3">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="24.257" y="23.495"/>
 <vertex x="24.257" y="22.225"/>
 <vertex x="25.654" y="22.225"/>
 <vertex x="25.654" y="23.495"/>
 </polygon>
 </signal>
 <signal name="N$4">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="11.176" y="29.845"/>
 <vertex x="11.176" y="28.702"/>
 <vertex x="11.684" y="28.702"/>
 <vertex x="11.684" y="29.845"/>
 </polygon>
 </signal>
 <signal name="N$5">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="24.257" y="20.955"/>
 <vertex x="24.511" y="20.955"/>
 <vertex x="24.511" y="21.59"/>
 <vertex x="24.257" y="21.59"/>
 </polygon>
 </signal>
 </signals>
 </board>
 </drawing>

0 comments (0 inline, 0 general)