seniordesign-hardware Changeset - 4acb8e37a621

Changeset - 4acb8e37a621

Parent rev.

Child rev.

[Not reviewed]

default

0 1 0

kripperger@CL-SEC241-09.cedarville.edu - 13 years ago 2012-11-12 12:26:55
kripperger@CL-SEC241-09.cedarville.edu

DRU

1 file changed with 4 insertions and 5 deletions:

slave/slave.brd

0 comments (0 inline, 0 general)

slave/slave.brd

➞

Show inline comments

@@ @@ -825,22 +825,22 @@ Please make sure your boards conform to @@
 <param name="mvStopFrame" value="1"/>
 <param name="mvCreamFrame" value="0"/>
 <param name="mlMinStopFrame" value="4mil"/>
 <param name="mlMaxStopFrame" value="4mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
-<param name="mlViaStopLimit" value="0mil"/>
+<param name="mlViaStopLimit" value="12mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
 <param name="slThermalIsolate" value="10mil"/>
 <param name="slThermalsForVias" value="0"/>
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkGrid" value="0"/>
-<param name="checkAngle" value="0"/>
+<param name="checkAngle" value="1"/>
 <param name="checkFont" value="1"/>
 <param name="checkRestrict" value="1"/>
 <param name="useDiameter" value="13"/>
 <param name="maxErrors" value="50"/>
 </designrules>
 <autorouter>
@@ @@ -1280,20 +1280,18 @@ Please make sure your boards conform to @@
 <wire x1="51.1048" y1="29.8704" x2="51.1048" y2="28.5242" width="0.8128" layer="1"/>
 <wire x1="51.1048" y1="28.5242" x2="50.9016" y2="28.321" width="0.8128" layer="1"/>
 <wire x1="33.8328" y1="9.9568" x2="27.2288" y2="9.9568" width="0.4064" layer="1"/>
 <wire x1="27.2288" y1="9.9568" x2="26.1112" y2="11.0744" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="11.0744" x2="26.1112" y2="12.0688" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="12.0688" x2="26.073" y2="12.107" width="0.4064" layer="1"/>
 <wire x1="45.4796" y1="28.2448" x2="45.72" y2="28.282" width="0.4064" layer="1"/>
 <wire x1="14.2548" y1="28.6512" x2="14.204" y2="28.702" width="0.4064" layer="1"/>
 <wire x1="54.356" y1="34.4805" x2="45.085" y2="34.4805" width="0.4064" layer="1"/>
 <wire x1="54.356" y1="34.4805" x2="54.7243" y2="34.4805" width="0.4064" layer="1"/>
 <wire x1="55.626" y1="26.416" x2="55.4736" y2="26.416" width="0.8128" layer="1"/>
 <wire x1="55.4736" y1="26.416" x2="55.4736" y2="27.0256" width="0.8128" layer="1"/>
 <wire x1="55.4736" y1="27.0256" x2="53.026" y2="27.0256" width="0.8128" layer="1"/>
 <wire x1="25.273" y1="23.707" x2="25.26665" y2="22.0472" width="0.4064" layer="1"/>
 <wire x1="25.26665" y1="22.0472" x2="24.7904" y2="22.0472" width="0.4064" layer="1"/>
 <via x="24.7904" y="22.0472" extent="1-16" drill="0.254"/>
 <via x="44.196" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="45.0088" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="45.8216" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="46.6344" y="14.6304" extent="1-16" drill="0.381"/>
@@ @@ -1839,21 +1837,22 @@ Please make sure your boards conform to @@
 <wire x1="42.672" y1="29.972" x2="45.9232" y2="29.972" width="0.4064" layer="1"/>
 <wire x1="45.9232" y1="29.972" x2="47.752" y2="31.8008" width="0.4064" layer="1"/>
 <wire x1="47.752" y1="31.8008" x2="51.816" y2="31.8008" width="0.4064" layer="1"/>
 <wire x1="51.816" y1="31.8008" x2="53.34" y2="30.2768" width="0.4064" layer="1"/>
 <wire x1="53.34" y1="30.2768" x2="55.9816" y2="30.2768" width="0.4064" layer="1"/>
 <wire x1="56.7944" y1="31.0896" x2="56.7944" y2="35.052" width="0.4064" layer="1"/>
 <wire x1="54.9656" y1="36.8808" x2="54.6989" y2="36.6776" width="0.4064" layer="1"/>
 <wire x1="54.6989" y1="36.6776" x2="54.356" y2="37.0205" width="0.4064" layer="1"/>
 <wire x1="55.9816" y1="30.2768" x2="56.7944" y2="31.0896" width="0.4064" layer="1"/>
 <wire x1="56.7944" y1="35.052" x2="54.9656" y2="36.8808" width="0.4064" layer="1"/>
 <contactref element="IC1" pad="24"/>
 <wire x1="33.8328" y1="21.1328" x2="33.8328" y2="14.732" width="0.4064" layer="16"/>
 <via x="33.8328" y="14.732" extent="1-16" drill="0.254"/>
 <wire x1="33.8328" y1="14.732" x2="31.098" y2="14.732" width="0.4064" layer="1"/>
 <wire x1="31.098" y1="14.732" x2="31.073" y2="14.707" width="0.4064" layer="1"/>
 <wire x1="54.6989" y1="36.6776" x2="54.9656" y2="36.6776" width="0.4064" layer="1"/>
 <wire x1="54.9656" y1="36.6776" x2="54.9656" y2="36.8808" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP2">
 <contactref element="ROTARY_DIP" pad="4"/>
 <wire x1="33.1216" y1="21.4376" x2="38.5064" y2="26.8224" width="0.4064" layer="16"/>
 <via x="38.5064" y="26.8224" extent="1-16" drill="0.254"/>
 <wire x1="38.5064" y1="26.8224" x2="42.3672" y2="30.6832" width="0.4064" layer="1"/>

0 comments (0 inline, 0 general)