seniordesign-hardware Changeset - c0143f6b81db

Changeset - c0143f6b81db

Parent rev.

Child rev.

[Not reviewed]

default

0 3 0

mkroening@CL-SEC241-07.cedarville.edu - 13 years ago 2012-11-01 19:27:51
mkroening@CL-SEC241-07.cedarville.edu

Finished draft routing sensor and camera

3 files changed with 59 insertions and 59 deletions:

master/eagle.epf

slave-daughter/slave-daughter-camera.brd

slave-daughter/slave-daughter-sensors.brd

0 comments (0 inline, 0 general)

master/eagle.epf

➞

Show inline comments

@@ @@ -155,241 +155,200 @@ UsedLibrary="C:/Program Files (x86)/EAGL @@
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/frames.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/freescale.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/ftdichip.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/fujitsu.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/fuse.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/gennum.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/halo-electronics.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/heatsink.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/holes.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/holtek.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/ic-package.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/inductor-coilcraft.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/inductor-neosid.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/inductor-nkl.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/inductors.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/infineon-tricore.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/infineon.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/intersil-techwell.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/intersil.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/ir.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/isd.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/johanson-technology.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/jump-0r-smd.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/jumper.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/lantronix.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/lattice.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/lc-filter.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/led-7-segment.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/led-citizen-electronics.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/led-lumiled.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/led.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/lem.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/linear-technology.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/linear.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/linx.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/logo.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/lprs.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/lsi-computer-systems.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/lumiled.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/marks.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/maxim.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/maxstream.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/melexis.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory-hitachi.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory-idt.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory-micron.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory-motorola-dram.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory-nec.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory-samsung.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory-sram.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/memory.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/mems.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micrel.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-cyrod.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-fujitsu.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-harris.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-hitachi.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-infineon.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-intel.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-mc68000.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-motorola.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-philips.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-renesas.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-samsung.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micro-siemens.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/microchip.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micron.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/micronas.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/microphon.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/microwave.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/midori-sensor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/minicircuits.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/mitsubishi-semiconductor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/motorola-sensor-driver.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/murata-filter.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/murata-sensor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/nanotec.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/national-instruments.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/national-semiconductor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/nec-lqfp100-pack.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/nec.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/nrj-semiconductor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/omnivision.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/on-semiconductor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/opto-honeywell-3000.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/opto-honeywell-4000.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/opto-honeywell.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/opto-micro-linear.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/opto-trans-siemens.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/opto-transmittter-hp.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/opto-vishay.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/optocoupler.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/pal.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/philips-semiconductors.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/photo-elements.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/piher.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/pinhead.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/plcc-socket.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/pld-intel.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/plxtech.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/pot-vitrohm.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/pot-xicor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/pot.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/ptc-ntc.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/quantum-research-group.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/rcl.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/recom-international.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/rectifier.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/ref-packages-longpad.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/ref-packages.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/relay.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/renesas.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor-bourns.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor-dil.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor-net.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor-power.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor-ruf.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor-shunt.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor-sil.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/resistor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/rf-micro-devices.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/rf-solutions.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/rohm.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/semicon-smd-ipc.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/sensor-comus-group.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/sensor-heraeus.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/sensor-infratec.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/sharp.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/silabs.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/sim-technology.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/sipex.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/smd-ipc.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/smd-special.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/solomon-systech.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/solpad.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/special-drill.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/special.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/st-microelectronics.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/supertex.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/supply1.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/supply2.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch-alps.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch-coto.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch-dil.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch-misc.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch-omron.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch-raychem.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch-reed.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/switch.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/telcom.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/telecontrolli.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/telefunken.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/testpad.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/texas-sn55-sn75.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/texas.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/toshiba.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/traco-electronic.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/trafo-bei.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/trafo-hammondmfg.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/trafo-siemens.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/trafo-xicon.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/trafo.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transformer-pulse.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transistor-fet.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transistor-neu-to92.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transistor-npn.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transistor-pnp.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transistor-power.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transistor-small-signal.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/transistor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/triac.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/trimble.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/tripas.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/u-blox.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/uln-udn.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/v-reg-micrel.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/v-reg.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/varistor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/wafer-scale-psd.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/wirepad.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/xicor.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/xilinx-virtex-v5.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/xilinx-xc18v.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/xilinx-xc9.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/xilinx-xcv.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/zetex.lbr"
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/zilog.lbr"
 UsedLibrary="C:/Temp/adafruit-Adafruit-Eagle-Library-81ea27c/adafruit-Adafruit-Eagle-Library-81ea27c/adafruit.lbr"
 UsedLibrary="C:/Temp/SparkFun.lbr"
 UsedLibrary="C:/Users/mkroening/Documents/eagle/seniordesign-hardware/lbr/SeniorDesign.lbr"
 [Win_1]
 Type="Schematic Editor"
 Loc="332 293 931 692"
 State=0
 Number=2
 File="C:/Users/mkroening/Documents/eagle/seniordesign-hardware/slave-daughter/slave-daughter-sensors.sch"
 View="-5.50062 -4.23062 254.116 189.346"
 WireWidths=" 0 0.3048 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0.4064 0.1524"
 PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
 PadDrills=" 0.5 0.6 0.7 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.2 2.8 3.2 0.8"
 ViaDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
 ViaDrills=" 0.5 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.2 2.8 3.2 0.6"
 HoleDrills=" 0.5 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.2 2.8 3.2 0.6"
 TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778"
 PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27"
 PolygonIsolates=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
 MiterRadiuss=" 0.254 0.3175 0.635 1.27 2.54 1 2 2.5 5 7.5 10 0"
 SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635"
 WireBend=0
 WireBendSet=31
 WireCap=1
 MiterStyle=0
 PadShape=0
 ViaShape=0
 PolygonPour=0
 PolygonRank=0
 PolygonThermals=1
 PolygonOrphans=0
 TextRatio=8
 PinDirection=3
 PinFunction=0
 PinLength=2
 PinVisible=3
 SwapLevel=0
 ArcDirection=0
 AddLevel=2
 PadsSameType=0
 Layer=91
 Sheet=1
 [Win_2]
 Type="Control Panel"
 Loc="580 320 1179 719"
 State=2
 Number=0
 [Desktop]
 Screen="1280 1024"
 Window="Win_1"
 Window="Win_2"

slave-daughter/slave-daughter-camera.brd

➞

Show inline comments

@@ @@ -246,273 +246,302 @@ We've spent an enormous amount of time c @@
 <rectangle x1="2.25" y1="-1.45" x2="3" y2="-0.7" layer="25"/>
 </package>
 </packages>
 </library>
 </libraries>
 <attributes>
 </attributes>
 <variantdefs>
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
 <designrules name="default">
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für
 die meisten Anwendungen passen. Sollte ihre Platine
 besondere Anforderungen haben, treffen Sie die erforderlichen
 Einstellungen hier und speichern die Design Rules unter
 einem neuen Namen ab.</description>
 <description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 The default Design Rules have been set to cover
 a wide range of applications. Your particular design
 may have different requirements, so please make the
 necessary adjustments and save your customized
 design rules under a new name.</description>
 <param name="layerSetup" value="(1*16)"/>
 <param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
 <param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
 <param name="mdWireWire" value="8mil"/>
 <param name="mdWirePad" value="8mil"/>
 <param name="mdWireVia" value="8mil"/>
 <param name="mdPadPad" value="8mil"/>
 <param name="mdPadVia" value="8mil"/>
 <param name="mdViaVia" value="8mil"/>
 <param name="mdSmdPad" value="8mil"/>
 <param name="mdSmdVia" value="8mil"/>
 <param name="mdSmdSmd" value="8mil"/>
 <param name="mdViaViaSameLayer" value="8mil"/>
 <param name="mnLayersViaInSmd" value="2"/>
 <param name="mdCopperDimension" value="40mil"/>
 <param name="mdDrill" value="8mil"/>
 <param name="mdSmdStop" value="0mil"/>
 <param name="msWidth" value="10mil"/>
 <param name="msDrill" value="24mil"/>
 <param name="msMicroVia" value="9.99mm"/>
 <param name="msBlindViaRatio" value="0.5"/>
 <param name="rvPadTop" value="0.25"/>
 <param name="rvPadInner" value="0.25"/>
 <param name="rvPadBottom" value="0.25"/>
 <param name="rvViaOuter" value="0.25"/>
 <param name="rvViaInner" value="0.25"/>
 <param name="rvMicroViaOuter" value="0.25"/>
 <param name="rvMicroViaInner" value="0.25"/>
 <param name="rlMinPadTop" value="10mil"/>
 <param name="rlMaxPadTop" value="20mil"/>
 <param name="rlMinPadInner" value="10mil"/>
 <param name="rlMaxPadInner" value="20mil"/>
 <param name="rlMinPadBottom" value="10mil"/>
 <param name="rlMaxPadBottom" value="20mil"/>
 <param name="rlMinViaOuter" value="8mil"/>
 <param name="rlMaxViaOuter" value="20mil"/>
 <param name="rlMinViaInner" value="8mil"/>
 <param name="rlMaxViaInner" value="20mil"/>
 <param name="rlMinMicroViaOuter" value="4mil"/>
 <param name="rlMaxMicroViaOuter" value="20mil"/>
 <param name="rlMinMicroViaInner" value="4mil"/>
 <param name="rlMaxMicroViaInner" value="20mil"/>
 <param name="psTop" value="-1"/>
 <param name="psBottom" value="-1"/>
 <param name="psFirst" value="-1"/>
 <param name="psElongationLong" value="100"/>
 <param name="psElongationOffset" value="100"/>
 <param name="mvStopFrame" value="1"/>
 <param name="mvCreamFrame" value="0"/>
 <param name="mlMinStopFrame" value="4mil"/>
 <param name="mlMaxStopFrame" value="4mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
 <param name="mlViaStopLimit" value="0mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
 <param name="slThermalIsolate" value="10mil"/>
 <param name="slThermalsForVias" value="0"/>
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkGrid" value="0"/>
 <param name="checkAngle" value="0"/>
 <param name="checkFont" value="1"/>
 <param name="checkRestrict" value="1"/>
 <param name="useDiameter" value="13"/>
 <param name="maxErrors" value="50"/>
 </designrules>
 <autorouter>
 <pass name="Default">
 <param name="RoutingGrid" value="50mil"/>
 <param name="tpViaShape" value="round"/>
 <param name="PrefDir.1" value="|"/>
 <param name="PrefDir.2" value="0"/>
 <param name="PrefDir.3" value="0"/>
 <param name="PrefDir.4" value="0"/>
 <param name="PrefDir.5" value="0"/>
 <param name="PrefDir.6" value="0"/>
 <param name="PrefDir.7" value="0"/>
 <param name="PrefDir.8" value="0"/>
 <param name="PrefDir.9" value="0"/>
 <param name="PrefDir.10" value="0"/>
 <param name="PrefDir.11" value="0"/>
 <param name="PrefDir.12" value="0"/>
 <param name="PrefDir.13" value="0"/>
 <param name="PrefDir.14" value="0"/>
 <param name="PrefDir.15" value="0"/>
 <param name="PrefDir.16" value="-"/>
 <param name="cfVia" value="8"/>
 <param name="cfNonPref" value="5"/>
 <param name="cfChangeDir" value="2"/>
 <param name="cfOrthStep" value="2"/>
 <param name="cfDiagStep" value="3"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="1"/>
 <param name="cfMalusStep" value="1"/>
 <param name="cfPadImpact" value="4"/>
 <param name="cfSmdImpact" value="4"/>
 <param name="cfBusImpact" value="0"/>
 <param name="cfHugging" value="3"/>
 <param name="cfAvoid" value="4"/>
 <param name="cfPolygon" value="10"/>
 <param name="cfBase.1" value="0"/>
 <param name="cfBase.2" value="1"/>
 <param name="cfBase.3" value="1"/>
 <param name="cfBase.4" value="1"/>
 <param name="cfBase.5" value="1"/>
 <param name="cfBase.6" value="1"/>
 <param name="cfBase.7" value="1"/>
 <param name="cfBase.8" value="1"/>
 <param name="cfBase.9" value="1"/>
 <param name="cfBase.10" value="1"/>
 <param name="cfBase.11" value="1"/>
 <param name="cfBase.12" value="1"/>
 <param name="cfBase.13" value="1"/>
 <param name="cfBase.14" value="1"/>
 <param name="cfBase.15" value="1"/>
 <param name="cfBase.16" value="0"/>
 <param name="mnVias" value="20"/>
 <param name="mnSegments" value="9999"/>
 <param name="mnExtdSteps" value="9999"/>
 <param name="mnRipupLevel" value="10"/>
 <param name="mnRipupSteps" value="100"/>
 <param name="mnRipupTotal" value="100"/>
 </pass>
 <pass name="Follow-me" refer="Default" active="yes">
 </pass>
 <pass name="Busses" refer="Default" active="yes">
 <param name="cfNonPref" value="4"/>
 <param name="cfBusImpact" value="4"/>
 <param name="cfHugging" value="0"/>
 <param name="mnVias" value="0"/>
 </pass>
 <pass name="Route" refer="Default" active="yes">
 </pass>
 <pass name="Optimize1" refer="Default" active="yes">
 <param name="cfVia" value="99"/>
 <param name="cfExtdStep" value="10"/>
 <param name="cfHugging" value="1"/>
 <param name="mnExtdSteps" value="1"/>
 <param name="mnRipupLevel" value="0"/>
 </pass>
 <pass name="Optimize2" refer="Optimize1" active="yes">
 <param name="cfNonPref" value="0"/>
 <param name="cfChangeDir" value="6"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="2"/>
 <param name="cfMalusStep" value="2"/>
 <param name="cfPadImpact" value="2"/>
 <param name="cfSmdImpact" value="2"/>
 <param name="cfHugging" value="0"/>
 </pass>
 <pass name="Optimize3" refer="Optimize2" active="yes">
 <param name="cfChangeDir" value="8"/>
 <param name="cfPadImpact" value="0"/>
 <param name="cfSmdImpact" value="0"/>
 </pass>
 <pass name="Optimize4" refer="Optimize3" active="yes">
 <param name="cfChangeDir" value="25"/>
 </pass>
 </autorouter>
 <elements>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="5.08" y="2.54" locked="yes"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="5.08" y="36.83" locked="yes"/>
 <element name="J1" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="25.7302" y="15.875" rot="R270"/>
 <element name="J2" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="24.511" y="21.59" rot="R270"/>
 <element name="J3" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="25.654" y="29.21" rot="R270"/>
 <element name="J1" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="30.8102" y="11.938" rot="R270"/>
 <element name="J2" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="30.861" y="20.447" rot="R270"/>
 <element name="J3" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="30.861" y="28.829" rot="R270"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="JP1" pad="1"/>
 <contactref element="J1" pad="2"/>
 <contactref element="J2" pad="2"/>
 <contactref element="J3" pad="2"/>
 <wire x1="24.491" y1="21.59" x2="25.634" y2="29.21" width="0" layer="19" extent="1-1"/>
 <wire x1="25.7102" y1="15.875" x2="24.491" y2="21.59" width="0" layer="19" extent="1-1"/>
 <wire x1="5.08" y1="2.667" x2="25.7102" y2="15.875" width="0" layer="19" extent="1-1"/>
 <wire x1="5.08" y1="2.667" x2="5.207" y2="2.667" width="0.4064" layer="1"/>
 <wire x1="5.207" y1="2.667" x2="14.605" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="14.605" y1="12.065" x2="21.844" y2="12.065" width="0.4064" layer="1"/>
 <via x="21.844" y="12.065" extent="1-16" drill="0.254"/>
 <wire x1="21.844" y1="12.065" x2="26.289" y2="12.065" width="0.4064" layer="16"/>
 <via x="26.289" y="12.065" extent="1-16" drill="0.254"/>
 <wire x1="26.289" y1="12.065" x2="30.6632" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="30.6632" y1="12.065" x2="30.7902" y2="11.938" width="0.4064" layer="1"/>
 <wire x1="30.7902" y1="11.938" x2="30.7902" y2="14.2948" width="0.4064" layer="1"/>
 <wire x1="30.7902" y1="14.2948" x2="27.813" y2="17.272" width="0.4064" layer="1"/>
 <via x="27.813" y="17.272" extent="1-16" drill="0.254"/>
 <wire x1="27.813" y1="17.272" x2="27.813" y2="20.447" width="0.4064" layer="16"/>
 <via x="27.813" y="20.447" extent="1-16" drill="0.254"/>
 <wire x1="27.813" y1="20.447" x2="30.841" y2="20.447" width="0.4064" layer="1"/>
 <wire x1="30.841" y1="20.447" x2="30.841" y2="22.499" width="0.4064" layer="1"/>
 <wire x1="30.841" y1="22.499" x2="27.686" y2="25.654" width="0.4064" layer="1"/>
 <via x="27.686" y="25.654" extent="1-16" drill="0.254"/>
 <wire x1="27.686" y1="25.654" x2="27.686" y2="28.829" width="0.4064" layer="16"/>
 <via x="27.686" y="28.829" extent="1-16" drill="0.254"/>
 <wire x1="27.686" y1="28.829" x2="30.841" y2="28.829" width="0.4064" layer="1"/>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
 </signal>
 <signal name="VCC">
 <contactref element="JP1" pad="3"/>
 </signal>
 <signal name="MOSI">
 <contactref element="JP1" pad="4"/>
 </signal>
 <signal name="MISO">
 <contactref element="JP1" pad="5"/>
 </signal>
 <signal name="SCK">
 <contactref element="JP1" pad="6"/>
 </signal>
 <signal name="PD4">
 <contactref element="JP1" pad="7"/>
 </signal>
 <signal name="PD5">
 <contactref element="JP1" pad="8"/>
 </signal>
 <signal name="PD6">
 <contactref element="JP1" pad="9"/>
 </signal>
 <signal name="PD7">
 <contactref element="JP1" pad="10"/>
 </signal>
 <signal name="SCL">
 <contactref element="JP2" pad="1"/>
 </signal>
 <signal name="SDA">
 <contactref element="JP2" pad="2"/>
 </signal>
 <signal name="PA0">
 <contactref element="JP2" pad="3"/>
 <contactref element="J1" pad="1"/>
 <wire x1="10.16" y1="36.957" x2="25.7102" y2="14.375" width="0" layer="19" extent="1-1"/>
 <wire x1="10.16" y1="36.957" x2="10.16" y2="36.83" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="36.83" x2="23.368" y2="23.622" width="0.4064" layer="1"/>
 <wire x1="23.368" y1="23.622" x2="23.368" y2="13.208" width="0.4064" layer="1"/>
 <wire x1="23.368" y1="13.208" x2="26.162" y2="10.414" width="0.4064" layer="1"/>
 <wire x1="26.162" y1="10.414" x2="30.7662" y2="10.414" width="0.4064" layer="1"/>
 <wire x1="30.7662" y1="10.414" x2="30.7902" y2="10.438" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA1">
 <contactref element="JP2" pad="4"/>
 <contactref element="J2" pad="1"/>
 <wire x1="12.7" y1="36.703" x2="24.491" y2="20.09" width="0" layer="19" extent="1-1"/>
 <wire x1="12.7" y1="36.703" x2="24.638" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="24.638" y1="24.765" x2="24.638" y2="19.685" width="0.4064" layer="1"/>
 <wire x1="24.638" y1="19.685" x2="25.4" y2="18.923" width="0.4064" layer="1"/>
 <wire x1="25.4" y1="18.923" x2="30.817" y2="18.923" width="0.4064" layer="1"/>
 <wire x1="30.817" y1="18.923" x2="30.841" y2="18.947" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA2">
 <contactref element="JP2" pad="5"/>
 <contactref element="J3" pad="1"/>
 <wire x1="15.24" y1="36.957" x2="25.634" y2="27.71" width="0" layer="19" extent="1-1"/>
 <wire x1="15.24" y1="36.957" x2="15.24" y2="36.83" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="36.83" x2="24.765" y2="27.305" width="0.4064" layer="1"/>
 <wire x1="24.765" y1="27.305" x2="30.817" y2="27.305" width="0.4064" layer="1"/>
 <wire x1="30.817" y1="27.305" x2="30.841" y2="27.329" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA3">
 <contactref element="JP2" pad="6"/>
 </signal>
 <signal name="PA4">
 <contactref element="JP2" pad="7"/>
 </signal>
 <signal name="PA5">
 <contactref element="JP2" pad="8"/>
 </signal>
 <signal name="PA6">
 <contactref element="JP2" pad="9"/>
 </signal>
 <signal name="PA7">
 <contactref element="JP2" pad="10"/>
 </signal>
 </signals>
 </board>
 </drawing>
 </eagle>

slave-daughter/slave-daughter-sensors.brd

➞

Show inline comments

@@ @@ -399,412 +399,424 @@ Please make sure your boards conform to @@
 <param name="mdSmdStop" value="0mil"/>
 <param name="msWidth" value="6mil"/>
 <param name="msDrill" value="13mil"/>
 <param name="msMicroVia" value="13mil"/>
 <param name="msBlindViaRatio" value="0.5"/>
 <param name="rvPadTop" value="0.25"/>
 <param name="rvPadInner" value="0.25"/>
 <param name="rvPadBottom" value="0.25"/>
 <param name="rvViaOuter" value="0.25"/>
 <param name="rvViaInner" value="0.25"/>
 <param name="rvMicroViaOuter" value="0.25"/>
 <param name="rvMicroViaInner" value="0.25"/>
 <param name="rlMinPadTop" value="7mil"/>
 <param name="rlMaxPadTop" value="20mil"/>
 <param name="rlMinPadInner" value="7mil"/>
 <param name="rlMaxPadInner" value="20mil"/>
 <param name="rlMinPadBottom" value="7mil"/>
 <param name="rlMaxPadBottom" value="20mil"/>
 <param name="rlMinViaOuter" value="7mil"/>
 <param name="rlMaxViaOuter" value="20mil"/>
 <param name="rlMinViaInner" value="7mil"/>
 <param name="rlMaxViaInner" value="20mil"/>
 <param name="rlMinMicroViaOuter" value="4mil"/>
 <param name="rlMaxMicroViaOuter" value="20mil"/>
 <param name="rlMinMicroViaInner" value="4mil"/>
 <param name="rlMaxMicroViaInner" value="20mil"/>
 <param name="psTop" value="-1"/>
 <param name="psBottom" value="-1"/>
 <param name="psFirst" value="-1"/>
 <param name="psElongationLong" value="100"/>
 <param name="psElongationOffset" value="100"/>
 <param name="mvStopFrame" value="1"/>
 <param name="mvCreamFrame" value="0"/>
 <param name="mlMinStopFrame" value="4mil"/>
 <param name="mlMaxStopFrame" value="4mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
 <param name="mlViaStopLimit" value="0mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
 <param name="slThermalIsolate" value="10mil"/>
 <param name="slThermalsForVias" value="0"/>
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkGrid" value="0"/>
 <param name="checkAngle" value="0"/>
 <param name="checkFont" value="1"/>
 <param name="checkRestrict" value="1"/>
 <param name="useDiameter" value="13"/>
 <param name="maxErrors" value="50"/>
 </designrules>
 <autorouter>
 <pass name="Default">
 <param name="RoutingGrid" value="50mil"/>
 <param name="tpViaShape" value="round"/>
 <param name="PrefDir.1" value="|"/>
 <param name="PrefDir.2" value="0"/>
 <param name="PrefDir.3" value="0"/>
 <param name="PrefDir.4" value="0"/>
 <param name="PrefDir.5" value="0"/>
 <param name="PrefDir.6" value="0"/>
 <param name="PrefDir.7" value="0"/>
 <param name="PrefDir.8" value="0"/>
 <param name="PrefDir.9" value="0"/>
 <param name="PrefDir.10" value="0"/>
 <param name="PrefDir.11" value="0"/>
 <param name="PrefDir.12" value="0"/>
 <param name="PrefDir.13" value="0"/>
 <param name="PrefDir.14" value="0"/>
 <param name="PrefDir.15" value="0"/>
 <param name="PrefDir.16" value="-"/>
 <param name="cfVia" value="8"/>
 <param name="cfNonPref" value="5"/>
 <param name="cfChangeDir" value="2"/>
 <param name="cfOrthStep" value="2"/>
 <param name="cfDiagStep" value="3"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="1"/>
 <param name="cfMalusStep" value="1"/>
 <param name="cfPadImpact" value="4"/>
 <param name="cfSmdImpact" value="4"/>
 <param name="cfBusImpact" value="0"/>
 <param name="cfHugging" value="3"/>
 <param name="cfAvoid" value="4"/>
 <param name="cfPolygon" value="10"/>
 <param name="cfBase.1" value="0"/>
 <param name="cfBase.2" value="1"/>
 <param name="cfBase.3" value="1"/>
 <param name="cfBase.4" value="1"/>
 <param name="cfBase.5" value="1"/>
 <param name="cfBase.6" value="1"/>
 <param name="cfBase.7" value="1"/>
 <param name="cfBase.8" value="1"/>
 <param name="cfBase.9" value="1"/>
 <param name="cfBase.10" value="1"/>
 <param name="cfBase.11" value="1"/>
 <param name="cfBase.12" value="1"/>
 <param name="cfBase.13" value="1"/>
 <param name="cfBase.14" value="1"/>
 <param name="cfBase.15" value="1"/>
 <param name="cfBase.16" value="0"/>
 <param name="mnVias" value="20"/>
 <param name="mnSegments" value="9999"/>
 <param name="mnExtdSteps" value="9999"/>
 <param name="mnRipupLevel" value="10"/>
 <param name="mnRipupSteps" value="100"/>
 <param name="mnRipupTotal" value="100"/>
 </pass>
 <pass name="Follow-me" refer="Default" active="yes">
 </pass>
 <pass name="Busses" refer="Default" active="yes">
 <param name="cfNonPref" value="4"/>
 <param name="cfBusImpact" value="4"/>
 <param name="cfHugging" value="0"/>
 <param name="mnVias" value="0"/>
 </pass>
 <pass name="Route" refer="Default" active="yes">
 </pass>
 <pass name="Optimize1" refer="Default" active="yes">
 <param name="cfVia" value="99"/>
 <param name="cfExtdStep" value="10"/>
 <param name="cfHugging" value="1"/>
 <param name="mnExtdSteps" value="1"/>
 <param name="mnRipupLevel" value="0"/>
 </pass>
 <pass name="Optimize2" refer="Optimize1" active="yes">
 <param name="cfNonPref" value="0"/>
 <param name="cfChangeDir" value="6"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="2"/>
 <param name="cfMalusStep" value="2"/>
 <param name="cfPadImpact" value="2"/>
 <param name="cfSmdImpact" value="2"/>
 <param name="cfHugging" value="0"/>
 </pass>
 <pass name="Optimize3" refer="Optimize2" active="yes">
 <param name="cfChangeDir" value="8"/>
 <param name="cfPadImpact" value="0"/>
 <param name="cfSmdImpact" value="0"/>
 </pass>
 <pass name="Optimize4" refer="Optimize3" active="yes">
 <param name="cfChangeDir" value="25"/>
 </pass>
 </autorouter>
 <elements>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="5.08" y="36.83" locked="yes"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="5.08" y="2.54" locked="yes"/>
 <element name="U$1" library="SeniorDesign" package="SOIC8" value="HIH6131-021-001" x="16.51" y="25.4"/>
 <element name="U$2" library="SeniorDesign" package="MAX44009" value="MAX44009" x="8.89" y="21.59" rot="R270"/>
 <element name="C1" library="SparkFun" package="0603-CAP" value="0.1uF" x="11.43" y="24.13" rot="R180"/>
 <element name="C2" library="SparkFun" package="0603-CAP" value="0.22uF" x="11.43" y="26.67" rot="R180"/>
 <element name="C3" library="SparkFun" package="0603-CAP" value="1uF" x="11.43" y="29.21" rot="R180"/>
 <element name="U$3" library="SparkFun" package="BMP085" value="BMP085" x="16.51" y="16.51"/>
 <element name="IC2" library="AlexW-Eagle-Libraries" package="SOIC8" value="MAX31855" x="26.67" y="25.4"/>
 <element name="R4" library="SparkFun" package="0603-RES" value="10k" x="31.75" y="24.13" rot="R270"/>
 <element name="C9" library="SparkFun" package="0603-CAP" value="NOPOP" x="27.051" y="19.431" rot="R270"/>
 <element name="C4" library="SparkFun" package="0603-CAP" value="100nF" x="24.003" y="19.431" rot="R90"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="U$1" pad="2"/>
 <contactref element="C1" pad="2"/>
 <contactref element="C2" pad="2"/>
 <contactref element="U$2" pad="2"/>
 <contactref element="U$2" pad="3"/>
 <contactref element="C3" pad="2"/>
 <contactref element="JP1" pad="1"/>
 <contactref element="IC2" pad="1"/>
 <contactref element="IC2" pad="1"/>
 <contactref element="C4" pad="2"/>
 <contactref element="U$3" pad="1"/>
 <wire x1="24.003" y1="20.281" x2="24.003" y2="20.32" width="0.4064" layer="1"/>
 <wire x1="24.003" y1="20.32" x2="24.765" y2="21.082" width="0.4064" layer="1"/>
 <wire x1="24.765" y1="21.082" x2="24.765" y2="22.8" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="29.21" x2="10.541" y2="29.21" width="0.4064" layer="1"/>
 <wire x1="10.541" y1="29.21" x2="5.08" y2="34.671" width="0.4064" layer="1"/>
 <wire x1="5.08" y1="34.671" x2="5.08" y2="36.957" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="29.21" x2="10.668" y2="29.21" width="0.4064" layer="1"/>
 <wire x1="10.668" y1="29.21" x2="10.668" y2="26.758" width="0.4064" layer="1"/>
 <wire x1="10.668" y1="26.758" x2="10.58" y2="26.67" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="26.67" x2="10.58" y2="24.13" width="0.4064" layer="1"/>
 <wire x1="9.23" y1="21.46" x2="9.89" y2="21.46" width="0.4064" layer="1"/>
 <wire x1="9.89" y1="21.46" x2="9.89" y2="23.44" width="0.4064" layer="1"/>
 <wire x1="9.89" y1="23.44" x2="10.58" y2="24.13" width="0.4064" layer="1"/>
 <wire x1="24.003" y1="20.32" x2="23.114" y2="21.209" width="0.4064" layer="1"/>
 <wire x1="23.114" y1="21.209" x2="23.114" y2="22.86" width="0.4064" layer="1"/>
 <wire x1="23.114" y1="22.86" x2="20.447" y2="25.527" width="0.4064" layer="1"/>
 <wire x1="20.447" y1="25.527" x2="16.637" y2="25.527" width="0.4064" layer="1"/>
 <wire x1="16.637" y1="25.527" x2="15.875" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="15.875" y1="24.765" x2="15.875" y2="22.8" width="0.4064" layer="1"/>
 <wire x1="15.875" y1="22.8" x2="15.875" y2="21.971" width="0.4064" layer="1"/>
 <wire x1="15.875" y1="21.971" x2="14.986" y2="21.082" width="0.4064" layer="1"/>
 <wire x1="14.986" y1="21.082" x2="14.224" y2="21.082" width="0.4064" layer="1"/>
 <wire x1="14.224" y1="21.082" x2="13.589" y2="21.717" width="0.4064" layer="1"/>
 <wire x1="13.589" y1="21.717" x2="12.319" y2="22.987" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="24.13" x2="10.58" y2="23.964" width="0.4064" layer="1"/>
 <wire x1="10.58" y1="23.964" x2="11.557" y2="22.987" width="0.4064" layer="1"/>
 <wire x1="11.557" y1="22.987" x2="12.319" y2="22.987" width="0.4064" layer="1"/>
 <wire x1="14.445" y1="17.78" x2="13.97" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="13.97" y1="17.78" x2="13.208" y2="18.542" width="0.4064" layer="1"/>
 <via x="13.208" y="18.542" extent="1-16" drill="0.254"/>
 <wire x1="13.208" y1="18.542" x2="13.208" y2="20.955" width="0.4064" layer="16"/>
 <via x="13.208" y="20.955" extent="1-16" drill="0.254"/>
 <wire x1="13.208" y1="20.955" x2="13.208" y2="21.336" width="0.4064" layer="1"/>
 <wire x1="13.208" y1="21.336" x2="13.589" y2="21.717" width="0.4064" layer="1"/>
 <wire x1="15.875" y1="21.971" x2="15.113" y2="21.209" width="0.4064" layer="1"/>
 <wire x1="15.113" y1="21.209" x2="14.097" y2="21.209" width="0.4064" layer="1"/>
 <wire x1="14.097" y1="21.209" x2="13.589" y2="21.717" width="0.4064" layer="1"/>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
 </signal>
 <signal name="VCC">
 <contactref element="U$1" pad="8"/>
 <contactref element="C2" pad="1"/>
 <contactref element="U$2" pad="1"/>
 <contactref element="C3" pad="1"/>
 <contactref element="JP1" pad="3"/>
 <contactref element="IC2" pad="4"/>
 <contactref element="R4" pad="2"/>
 <contactref element="IC2" pad="4"/>
 <contactref element="C4" pad="1"/>
 <contactref element="U$3" pad="3"/>
 <contactref element="U$3" pad="4"/>
 <wire x1="28.575" y1="22.8" x2="31.27" y2="22.8" width="0.4064" layer="1"/>
 <wire x1="31.27" y1="22.8" x2="31.75" y2="23.28" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="36.957" x2="10.16" y2="34.417" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="34.417" x2="12.28" y2="32.297" width="0.4064" layer="1"/>
 <wire x1="12.28" y1="29.21" x2="12.319" y2="29.21" width="0.4064" layer="1"/>
 <wire x1="12.319" y1="29.21" x2="13.462" y2="28.067" width="0.4064" layer="1"/>
 <wire x1="13.462" y1="28.067" x2="14.538" y2="28.067" width="0.4064" layer="1"/>
 <wire x1="14.538" y1="28.067" x2="14.605" y2="28" width="0.4064" layer="1"/>
 <wire x1="12.28" y1="26.67" x2="13.208" y2="26.67" width="0.4064" layer="1"/>
 <wire x1="13.208" y1="26.67" x2="13.462" y2="26.924" width="0.4064" layer="1"/>
 <wire x1="13.462" y1="26.924" x2="13.462" y2="28.067" width="0.4064" layer="1"/>
 <wire x1="14.445" y1="15.24" x2="14.859" y2="15.24" width="0.4064" layer="1"/>
 <wire x1="14.859" y1="15.24" x2="15.494" y2="14.605" width="0.4064" layer="1"/>
 <wire x1="15.494" y1="14.605" x2="16.35" y2="14.605" width="0.4064" layer="1"/>
 <wire x1="16.35" y1="14.605" x2="16.51" y2="14.445" width="0.4064" layer="1"/>
 <wire x1="16.51" y1="14.445" x2="16.543" y2="14.445" width="0.4064" layer="1"/>
 <wire x1="16.543" y1="14.445" x2="16.637" y2="14.351" width="0.4064" layer="1"/>
 <wire x1="16.637" y1="14.351" x2="16.637" y2="13.97" width="0.4064" layer="1"/>
 <wire x1="16.637" y1="13.97" x2="17.399" y2="13.208" width="0.4064" layer="1"/>
 <wire x1="17.399" y1="13.208" x2="18.63" y2="13.208" width="0.4064" layer="1"/>
 <wire x1="18.63" y1="13.208" x2="24.003" y2="18.581" width="0.4064" layer="1"/>
 <wire x1="28.575" y1="22.8" x2="28.575" y2="21.971" width="0.4064" layer="1"/>
 <wire x1="28.575" y1="21.971" x2="29.21" y2="21.336" width="0.4064" layer="1"/>
 <wire x1="29.21" y1="21.336" x2="29.21" y2="18.034" width="0.4064" layer="1"/>
 <wire x1="29.21" y1="18.034" x2="28.448" y2="17.272" width="0.4064" layer="1"/>
 <wire x1="28.448" y1="17.272" x2="25.312" y2="17.272" width="0.4064" layer="1"/>
 <wire x1="25.312" y1="17.272" x2="24.003" y2="18.581" width="0.4064" layer="1"/>
 <wire x1="12.28" y1="29.21" x2="12.28" y2="32.297" width="0.4064" layer="1"/>
 <wire x1="10.55" y1="21.46" x2="12.316" y2="21.46" width="0.4064" layer="1"/>
 <wire x1="12.316" y1="21.46" x2="12.319" y2="21.463" width="0.4064" layer="1"/>
 <via x="12.319" y="21.463" extent="1-16" drill="0.254"/>
 <wire x1="12.319" y1="21.463" x2="12.319" y2="24.003" width="0.4064" layer="16"/>
 <wire x1="12.319" y1="24.003" x2="13.462" y2="25.146" width="0.4064" layer="16"/>
 <via x="13.462" y="25.146" extent="1-16" drill="0.254"/>
 <wire x1="13.462" y1="25.146" x2="13.462" y2="25.488" width="0.4064" layer="1"/>
 <wire x1="13.462" y1="25.488" x2="12.28" y2="26.67" width="0.4064" layer="1"/>
 <wire x1="14.445" y1="15.24" x2="13.97" y2="15.24" width="0.4064" layer="1"/>
 <wire x1="13.97" y1="15.24" x2="13.462" y2="14.732" width="0.4064" layer="1"/>
 <wire x1="13.462" y1="14.732" x2="13.462" y2="13.589" width="0.4064" layer="1"/>
 <via x="13.462" y="13.589" extent="1-16" drill="0.254"/>
 <wire x1="13.462" y1="13.589" x2="12.319" y2="13.589" width="0.4064" layer="16"/>
 <wire x1="12.319" y1="13.589" x2="12.319" y2="21.463" width="0.4064" layer="16"/>
 <wire x1="13.462" y1="13.589" x2="12.827" y2="13.589" width="0.4064" layer="16"/>
 <wire x1="12.827" y1="13.589" x2="12.319" y2="14.097" width="0.4064" layer="16"/>
 <wire x1="12.319" y1="14.097" x2="12.319" y2="21.463" width="0.4064" layer="16"/>
 </signal>
 <signal name="MOSI">
 <contactref element="JP1" pad="4"/>
 </signal>
 <signal name="MISO">
 <contactref element="JP1" pad="5"/>
 <contactref element="IC2" pad="7"/>
 <wire x1="15.24" y1="36.957" x2="15.24" y2="36.83" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="36.83" x2="22.225" y2="29.845" width="0.4064" layer="1"/>
 <wire x1="22.225" y1="29.845" x2="25.654" y2="29.845" width="0.4064" layer="1"/>
 <wire x1="25.654" y1="29.845" x2="26.035" y2="29.464" width="0.4064" layer="1"/>
 <wire x1="26.035" y1="29.464" x2="26.035" y2="28" width="0.4064" layer="1"/>
 </signal>
 <signal name="SCK">
 <contactref element="JP1" pad="6"/>
 <contactref element="IC2" pad="5"/>
 <wire x1="17.78" y1="36.703" x2="17.78" y2="36.576" width="0.4064" layer="1"/>
 <wire x1="17.78" y1="36.576" x2="23.622" y2="30.734" width="0.4064" layer="1"/>
 <wire x1="23.622" y1="30.734" x2="27.432" y2="30.734" width="0.4064" layer="1"/>
 <wire x1="27.432" y1="30.734" x2="28.575" y2="29.591" width="0.4064" layer="1"/>
 <wire x1="28.575" y1="29.591" x2="28.575" y2="28" width="0.4064" layer="1"/>
 </signal>
 <signal name="PD4">
 <contactref element="JP1" pad="7"/>
 </signal>
 <signal name="PD5">
 <contactref element="JP1" pad="8"/>
 </signal>
 <signal name="PD6">
 <contactref element="JP1" pad="9"/>
 </signal>
 <signal name="PD7">
 <contactref element="JP1" pad="10"/>
 </signal>
 <signal name="SCL">
 <contactref element="JP2" pad="1"/>
 <contactref element="U$1" pad="3"/>
 <contactref element="U$2" pad="5"/>
 <contactref element="U$3" pad="6"/>
 <wire x1="18.575" y1="16.51" x2="19.05" y2="16.51" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="16.51" x2="19.558" y2="17.018" width="0.4064" layer="1"/>
 <wire x1="19.558" y1="17.018" x2="20.193" y2="17.018" width="0.4064" layer="1"/>
 <wire x1="20.193" y1="17.018" x2="20.701" y2="17.526" width="0.4064" layer="1"/>
 <wire x1="20.701" y1="17.526" x2="20.701" y2="24.257" width="0.4064" layer="1"/>
 <wire x1="20.701" y1="24.257" x2="20.193" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="20.193" y1="24.765" x2="17.526" y2="24.765" width="0.4064" layer="1"/>
 <wire x1="17.526" y1="24.765" x2="17.145" y2="24.384" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="24.384" x2="17.145" y2="22.8" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="22.8" x2="17.145" y2="21.971" width="0.4064" layer="1"/>
 <wire x1="9.89" y1="19.7" x2="9.89" y2="19.288" width="0.4064" layer="1"/>
 <wire x1="9.89" y1="19.288" x2="9.525" y2="18.923" width="0.4064" layer="1"/>
 <wire x1="9.525" y1="18.923" x2="9.525" y2="16.637" width="0.4064" layer="1"/>
 <wire x1="9.525" y1="16.637" x2="9.525" y2="7.112" width="0.4064" layer="1"/>
 <wire x1="9.525" y1="7.112" x2="5.08" y2="2.667" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="21.971" x2="14.859" y2="19.685" width="0.4064" layer="1"/>
 <wire x1="14.859" y1="19.685" x2="12.573" y2="19.685" width="0.4064" layer="1"/>
 <wire x1="12.573" y1="19.685" x2="11.303" y2="18.415" width="0.4064" layer="1"/>
 <via x="11.303" y="18.415" extent="1-16" drill="0.254"/>
 <wire x1="11.303" y1="18.415" x2="8.128" y2="18.415" width="0.4064" layer="16"/>
 <via x="8.128" y="18.415" extent="1-16" drill="0.254"/>
 <wire x1="8.128" y1="18.415" x2="8.128" y2="17.145" width="0.4064" layer="1"/>
 <wire x1="8.128" y1="17.145" x2="8.636" y2="16.637" width="0.4064" layer="1"/>
 <wire x1="8.636" y1="16.637" x2="9.525" y2="16.637" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="21.971" x2="14.732" y2="19.558" width="0.4064" layer="1"/>
 <wire x1="14.732" y1="19.558" x2="12.446" y2="19.558" width="0.4064" layer="1"/>
 <wire x1="12.446" y1="19.558" x2="11.303" y2="18.415" width="0.4064" layer="1"/>
 </signal>
 <signal name="SDA">
 <contactref element="JP2" pad="2"/>
 <contactref element="U$1" pad="4"/>
 <contactref element="U$2" pad="6"/>
 <contactref element="U$3" pad="7"/>
 <wire x1="18.415" y1="22.8" x2="18.415" y2="17.94" width="0.4064" layer="1"/>
 <wire x1="18.415" y1="17.94" x2="18.575" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="10.55" y1="19.7" x2="18.415" y2="17.94" width="0" layer="19" extent="1-1"/>
 <wire x1="10.55" y1="19.7" x2="10.55" y2="5.343" width="0.4064" layer="1"/>
 <wire x1="10.55" y1="5.343" x2="7.62" y2="2.413" width="0.4064" layer="1"/>
 <wire x1="10.55" y1="19.7" x2="10.683" y2="19.7" width="0.4064" layer="1"/>
 <wire x1="10.683" y1="19.7" x2="11.176" y2="20.193" width="0.4064" layer="1"/>
 <wire x1="11.176" y1="20.193" x2="14.224" y2="20.193" width="0.4064" layer="1"/>
 <wire x1="14.224" y1="20.193" x2="14.478" y2="20.447" width="0.4064" layer="1"/>
 <via x="14.478" y="20.447" extent="1-16" drill="0.254"/>
 <wire x1="14.478" y1="20.447" x2="17.018" y2="20.447" width="0.4064" layer="16"/>
 <via x="17.018" y="20.447" extent="1-16" drill="0.254"/>
 <wire x1="17.018" y1="20.447" x2="17.399" y2="20.066" width="0.4064" layer="1"/>
 <wire x1="17.399" y1="20.066" x2="17.399" y2="18.542" width="0.4064" layer="1"/>
 <wire x1="17.399" y1="18.542" x2="17.907" y2="18.034" width="0.4064" layer="1"/>
 <wire x1="17.907" y1="18.034" x2="18.321" y2="18.034" width="0.4064" layer="1"/>
 <wire x1="18.321" y1="18.034" x2="18.575" y2="17.78" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA0">
 <contactref element="JP2" pad="3"/>
 <contactref element="U$3" pad="2"/>
 <wire x1="14.445" y1="16.51" x2="14.478" y2="16.51" width="0.4064" layer="1"/>
 <wire x1="14.445" y1="16.51" x2="12.573" y2="16.51" width="0.4064" layer="1"/>
 <wire x1="12.573" y1="16.51" x2="11.938" y2="15.875" width="0.4064" layer="1"/>
 <wire x1="11.938" y1="15.875" x2="11.938" y2="4.445" width="0.4064" layer="1"/>
 <wire x1="11.938" y1="4.445" x2="10.16" y2="2.667" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA1">
 <contactref element="JP2" pad="4"/>
 <contactref element="R4" pad="1"/>
 <contactref element="IC2" pad="6"/>
 <wire x1="31.75" y1="24.98" x2="31.75" y2="25.019" width="0.4064" layer="1"/>
 <wire x1="31.75" y1="25.019" x2="30.988" y2="25.781" width="0.4064" layer="1"/>
 <wire x1="30.988" y1="25.781" x2="27.813" y2="25.781" width="0.4064" layer="1"/>
 <wire x1="27.813" y1="25.781" x2="27.305" y2="26.289" width="0.4064" layer="1"/>
 <wire x1="27.305" y1="26.289" x2="27.305" y2="28" width="0.4064" layer="1"/>
 <wire x1="12.7" y1="2.413" x2="12.7" y2="2.54" width="0.4064" layer="1"/>
 <wire x1="12.7" y1="2.54" x2="21.59" y2="11.43" width="0.4064" layer="1"/>
 <wire x1="21.59" y1="11.43" x2="21.59" y2="14.097" width="0.4064" layer="1"/>
 <via x="21.59" y="14.097" extent="1-16" drill="0.254"/>
 <wire x1="21.59" y1="14.097" x2="21.59" y2="26.162" width="0.4064" layer="16"/>
 <wire x1="21.59" y1="26.162" x2="21.717" y2="26.289" width="0.4064" layer="16"/>
 <via x="21.717" y="26.289" extent="1-16" drill="0.254"/>
 <wire x1="21.717" y1="26.289" x2="27.305" y2="26.289" width="0.4064" layer="1"/>
 </signal>
 <signal name="PA2">
 <contactref element="JP2" pad="5"/>
 </signal>
 <signal name="PA3">
 <contactref element="JP2" pad="6"/>
 </signal>
 <signal name="PA4">
 <contactref element="JP2" pad="7"/>
 </signal>
 <signal name="PA5">
 <contactref element="JP2" pad="8"/>
 </signal>
 <signal name="PA6">
 <contactref element="JP2" pad="9"/>
 </signal>
 <signal name="PA7">
 <contactref element="JP2" pad="10"/>
 </signal>
 <signal name="N$1">
 <contactref element="U$1" pad="1"/>
 <contactref element="C1" pad="1"/>
 <wire x1="12.28" y1="24.13" x2="12.319" y2="24.13" width="0.4064" layer="1"/>
 <wire x1="12.319" y1="24.13" x2="13.716" y2="22.733" width="0.4064" layer="1"/>
 <wire x1="13.716" y1="22.733" x2="14.538" y2="22.733" width="0.4064" layer="1"/>
 <wire x1="14.538" y1="22.733" x2="14.605" y2="22.8" width="0.4064" layer="1"/>
 </signal>
 <signal name="T+">
 <contactref element="IC2" pad="3"/>
 <contactref element="C9" pad="2"/>
 <wire x1="27.305" y1="22.8" x2="27.305" y2="21.971" width="0.4064" layer="1"/>
 <wire x1="27.305" y1="21.971" x2="28.321" y2="20.955" width="0.4064" layer="1"/>
 <wire x1="28.321" y1="20.955" x2="28.321" y2="19.851" width="0.4064" layer="1"/>
 <wire x1="28.321" y1="19.851" x2="27.051" y2="18.581" width="0.4064" layer="1"/>
 </signal>
 <signal name="T-">
 <contactref element="IC2" pad="2"/>
 <contactref element="C9" pad="1"/>
 <wire x1="26.035" y1="22.8" x2="26.035" y2="21.297" width="0.4064" layer="1"/>
 <wire x1="26.035" y1="21.297" x2="27.051" y2="20.281" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$2">
 </signal>
 </signals>
 </board>
 </drawing>
 </eagle>

0 comments (0 inline, 0 general)