Generated by EAGLE CAM Processor 6.4.0

Photoplotter Info File: C:/repos/ZonCoffee-Hardware/CAM/zoncoffee.gpi

 Date              : 6/12/2014 2:08:34 PM
 Plotfile          : C:/repos/ZonCoffee-Hardware/CAM/zoncoffee.GTL
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      draw      0.0000inch               6
 D11      rectangle 0.0276inch x 0.0354inch    30
 D12      rectangle 0.0433inch x 0.0728inch     6
 D13      rectangle 0.0748inch x 0.0787inch     2
 D14      rectangle 0.0551inch x 0.0138inch     5
 D15      rectangle 0.0748inch x 0.0709inch     2
 D16      square    0.0748inch               2
 D17      rectangle 0.0236inch x 0.0610inch     8
 D18      rectangle 0.0217inch x 0.0472inch     5
 D19      rectangle 0.0091inch x 0.0236inch    24
 D20      rectangle 0.0236inch x 0.0091inch    24
 D21      square    0.2205inch               1
 D22      draw      0.0118inch               4
 D23      square    0.0600inch               6
 D24      rectangle 0.0276inch x 0.0197inch     2
 D25      rectangle 0.0354inch x 0.0276inch     6
 D26      rectangle 0.0354inch x 0.0315inch     4
 D27      round     0.0350inch               2
 D28      rectangle 0.0355inch x 0.0180inch     8
 D29      draw      0.0080inch             361
 D30      round     0.0240inch              58
 D31      round     0.0270inch               1