Generated by EAGLE CAM Processor 5.11.0

Photoplotter Info File: C:/Users/Ethan Zonca/Documents/eagle/ZonCoffee-Hardware/ZonCoffeeSchematic.topsoldermask.gpi

 Date              : 3/31/2011 11:13:55 AM
 Plotfile          : C:/Users/Ethan Zonca/Documents/eagle/ZonCoffee-Hardware/ZonCoffeeSchematic.topsoldermask.ger
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch

Parameter settings:

 Emulate Apertures : no
 Emulate Thermal   : no
 Emulate Annulus   : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      rectangle 0.0946inch x 0.0316inch     8
 D11      square    0.0820inch               3
 D12      octagon   0.0820inch               5
 D13      round     0.0820inch              27
 D14      rectangle 0.0300inch x 0.0580inch    16
 D15      rectangle 0.0580inch x 0.0300inch    16
 D16      rectangle 0.0552inch x 0.0631inch     4
 D17      square    0.0880inch               2
 D18      round     0.0880inch               2
 D19      rectangle 0.0552inch x 0.0395inch     2
 D20      rectangle 0.0395inch x 0.0552inch     4
 D21      rectangle 0.0474inch x 0.0513inch     6
 D22      round     0.0640inch               2
 D23      rectangle 0.0513inch x 0.0474inch     2
 D24      round     0.0730inch               4
 D25      round     0.1380inch               4
 D26      draw      0.0720inch               3