//
// TempSense: read temperature from TC, RTD, or NTC
//

#include "tempsense.h"
#include "flash.h"
#include "ssd1306/ssd1306.h"
#include "max31856/max31856.h"


// Initialize temperature sensor
void tempsense_init(void)
{
    // TODO: Rework SPI stuff... init the port in a sharedlib then pass ref to display and tempsense

    max31856_init(spi_get(), TEMPSENSE_MAX_CS_PORT, TEMPSENSE_MAX_CS_PIN, 0);

    // Maybe don't perform temp sensor setup in here, but in readtemp?
    // what happens if the user changes the tempsense type while running?
    // we need to re-init...
}


// Request reading from configured temperature sensor
void tempsense_readtemp(void)
{

    switch(flash_getsettings()->val.sensor_type)
    {
        case SENSOR_TC_K:
        case SENSOR_TC_E:
        case SENSOR_TC_N:
        case SENSOR_TC_R:
        case SENSOR_TC_S:
        case SENSOR_TC_T:
        {
            // Read MAX31856
            max31856_process();
        } break;

        case SENSOR_NTC:
        {
            // Read analog value from internal ADC, linearize the reading, etc
            //TODO
        } break;

    }

    // either return latest reading from DMA loop (NTC, etc)
    // or initiate a blocking read and return it.
    // Need to gracefully handle the timeout...
}


// Get latest temperature in requested units
float tempsense_gettemp(void)
{
    float temp_converted = max31856_latest_temp();

    if(flash_getsettings()->val.temp_units == TEMP_UNITS_FAHRENHEIT)
        temp_converted = temp_converted * 1.8f + 32.0f;

    return temp_converted;
}