therm Changeset - 45ee045c249f · protofusion repositories

Changeset - 45ee045c249f

Parent rev.

Child rev.

[Not reviewed]

cortex-f0

0 7 0

matthewreed - 9 years ago 2015-12-22 22:39:09

Added checksum to flash write and restore functions and load default settings

7 files changed with 44 insertions and 36 deletions:

config.h

display.c

flash.c

flash.h

ssd1306.c

ssd1306.h

states.h

0 comments (0 inline, 0 general)

config.h

➞

Show inline comments

@@ @@ -42,6 +42,7 @@ @@
 #define DEFAULT_K_P 10
 #define DEFAULT_K_I 1
 #define DEFAULT_K_D 1
 #define DEFAULT_TEMP_OFFSET 0
 #define DEFAULT_IGNORE_ERROR 0
 #define DEFAULT_SETPOINT_BREW 70
 #define DEFAULT_SETPOINT_STEAM 70

display.c

➞

Show inline comments

@@ @@ -35,7 +35,7 @@ static uint8_t sw_right_last = 0; @@
 static uint8_t trigger_drawsetpoint = 1;
 static int16_t last_temp = 21245;
 static uint8_t goto_mode = MODE_HEAT;
-static uint8_t reset_mode = RESET_RESET;
+static uint8_t reset_mode = RESET_REBOOT;
@@ @@ -109,7 +109,7 @@ void display_process(therm_settings_t* s @@
                         break;
                     case MODE_RESET:
                         status->state = STATE_RESET;
-                        reset_mode = RESET_RESET;
+                        reset_mode = RESET_REBOOT;
                         break;
 					#ifdef BOOTLOADER_SHORTCUT
                     case MODE_BOOTLOADER:
@@ @@ -457,17 +457,21 @@ void display_process(therm_settings_t* s @@
             ssd1306_drawlogo();
             switch(reset_mode) {
-				case RESET_RESET:
+				case RESET_DEFAULTS:
+				{
-					ssd1306_drawstring("-> reset     ", 1, 40);
+					ssd1306_drawstring("-> defaults   ", 1, 40);
 				} break;
                 case RESET_BOOTLOADER:
+                {
                     ssd1306_drawstring("-> bootloader", 1, 40);
                     ssd1306_drawstring("-> bootloader ", 1, 40);
                 } break;
                 case RESET_REBOOT:
+                {
                     ssd1306_drawstring("-> reboot     ", 1, 40);
                 } break;
                 case RESET_EXIT:
+                {
                     ssd1306_drawstring("-> exit      ", 1, 40);
+                    ssd1306_drawstring("-> exit       ", 1, 40);
                 } break;
+            }
@@ @@ -484,13 +488,18 @@ void display_process(therm_settings_t* s @@
                         bootloader_enter(); // Resets into bootloader
                         status->state = STATE_RESET; // Just in case
                     } break;
-                    case RESET_RESET:
+                    case RESET_DEFAULTS:
+                    {
                         status->state = STATE_RESET;
                         flash_load_defaults(set);
                         flash_save(set);
                         NVIC_SystemReset();
                     } break;
                     case RESET_REBOOT:
+                    {
                         status->state = STATE_RESET;
                         NVIC_SystemReset();
                     } break;
                     case RESET_EXIT:
+                    {
                         status->state = STATE_IDLE;

flash.c

➞

Show inline comments

 #include "stm32f0xx_hal.h"
 #include "ssd1306.h"
 #include "stm32f0xx_hal_flash.h"
 #include "flash.h"
 __attribute__((__section__(".eeprom"))) uint16_t eeprom[512];
 #define MAGIC_NUMBER 0x0BAE
 static void __flash_write(therm_settings_t* tosave);
 #define EEPROM_MAGIC_INDEX 0
 #define EEPROM_MAGIC_VALUE 0xbeef
 void flash_save(therm_settings_t* tosave)
+{
     __flash_write(tosave);
+}
 void flash_restore(therm_settings_t* torestore)
+{
 	//read flash and calculate checksum
 	uint16_t checksum = MAGIC_NUMBER;
 	uint16_t i;
     for(i = 0; i < (sizeof(therm_settings_t)/2); i++)
+	{
 		torestore->data[i] = eeprom[i];
 		checksum ^= torestore->data[i];
+	}
     if(eeprom[EEPROM_MAGIC_INDEX] == EEPROM_MAGIC_VALUE)
+    {
         for(uint8_t i = 1; i <= 20; i++) {
             torestore->data[i] = *(eeprom+i);
+        }
+    }
     else {
         // load default settings
     //if checksum doesn't match, load default settings
     if((checksum ^ eeprom[i+1]) != 0) {
     	flash_load_defaults(torestore);
+    }
+}
 void flash_load_defaults(therm_settings_t* torestore) {
@@ @@ -43,19 +36,17 @@ void flash_load_defaults(therm_settings_ @@
 	torestore->val.k_p = DEFAULT_K_P;
 	torestore->val.k_i = DEFAULT_K_I;
 	torestore->val.k_d = DEFAULT_K_D;
 	torestore->val.temp_offset = DEFAULT_TEMP_OFFSET;
 	torestore->val.ignore_error = DEFAULT_IGNORE_ERROR;
 	torestore->val.setpoint_brew = DEFAULT_SETPOINT_BREW;
 	torestore->val.setpoint_steam = DEFAULT_SETPOINT_STEAM;
+}
 static void __flash_write(therm_settings_t* tosave)
+{
-    // Erase mem
     // Erase mem
     HAL_FLASH_Unlock();
     //TODO: add checksum instead of magic value
     //TODO: change checksum to invalidate flash instead of erase?
     // Erase the FLASH pages
     FLASH_EraseInitTypeDef erase;
     erase.TypeErase = TYPEERASE_PAGES;
@@ @@ -63,19 +54,22 @@ static void __flash_write(therm_settings @@
     erase.NbPages = 1;
     uint32_t SectorError = 0;
     HAL_FLASHEx_Erase(&erase, &SectorError);
     CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
     for(uint8_t i = 1; i <= (sizeof(therm_settings_t)/2); i++)
     // write to flash and calculate the checksum
     uint16_t checksum = MAGIC_NUMBER;
     uint16_t i;
     for(i = 0; i < (sizeof(therm_settings_t)/2); i++)
+	{
     	HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom + i), tosave->data[i]);
 		HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)&eeprom[i], tosave->data[i]);
     	checksum ^= tosave->data[i];
+	}
     HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom + EEPROM_MAGIC_INDEX), EEPROM_MAGIC_VALUE);
     // write the checksum
     HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)&eeprom[i+1], checksum);
     HAL_FLASH_Lock();
+}
 // vim:softtabstop=4 shiftwidth=4 expandtab

flash.h

➞

Show inline comments

@@ @@ -2,6 +2,7 @@ @@
 #define FLASH_H
 #include "states.h"
 #include "stm32f0xx_hal_flash.h"
 #define PAGE_SIZE ((uint16_t)0x400)
 #define END_ADDR 0x08007FFF

ssd1306.c

➞

Show inline comments

 #include "stm32f0xx_hal_conf.h"
 #include "ssd1306.h"
 // Write command to OLED

ssd1306.h

➞

Show inline comments

@@ @@ -20,6 +20,8 @@ @@
 //#define   SPI_SendByte(data)  SPI_I2S_SendData(SPI1,data)
 //#define   SPI_Wait()       while(!(SPI1->SR&SPI_FLAG_TXE));while(SPI1->SR&SPI_FLAG_BSY);
 #include "stm32f0xx_hal_conf.h"
 void ssd1306_init(void);
 void ssd1306_drawchar(char ascii, unsigned char row, unsigned char xPos);
 void ssd1306_drawcharbig(char ascii, unsigned char row, unsigned char xPos);

states.h

➞

Show inline comments

 #ifndef STATES_H
 #define STATES_H
 #include "stm32f0xx_hal.h"
 #include "config.h"
 typedef struct {
@@ @@ -66,7 +67,8 @@ enum GOTO_MODE { @@
 };
 enum RESET_MODE {
 	RESET_RESET = 0,
 	RESET_REBOOT = 0,
 	RESET_DEFAULTS,
 	RESET_BOOTLOADER,
 	RESET_EXIT,
 	RESET_SIZE,

0 comments (0 inline, 0 general)