therm Changeset - 45ee045c249f · protofusion repositories

Changeset - 45ee045c249f

Parent rev.

Child rev.

[Not reviewed]

cortex-f0

0 7 0

matthewreed - 9 years ago 2015-12-22 22:39:09

Added checksum to flash write and restore functions and load default settings

7 files changed with 40 insertions and 32 deletions:

config.h

display.c

flash.c

flash.h

ssd1306.c

ssd1306.h

states.h

0 comments (0 inline, 0 general)

config.h

➞

Show inline comments

@@ @@ -21,32 +21,33 @@ @@
 #define LED_POWER GPIOF,GPIO_PIN_0
 #define MAX_CS GPIOA,GPIO_PIN_15
 #define SW_BTN  GPIOB, GPIO_PIN_4
 #define SW_UP   GPIOB, GPIO_PIN_7
 #define SW_DOWN GPIOB, GPIO_PIN_3
 #define SW_LEFT GPIOB, GPIO_PIN_5
 #define SW_RIGHT GPIOB, GPIO_PIN_6
 #define SSR_PIN GPIOA, GPIO_PIN_1
 // Visual niceness
 #define hal_init() HAL_Init()
 // Add bootloader option to top of idle screen menu
 #define BOOTLOADER_SHORTCUT
 #define DEFAULT_BOOT_TO_BREW 0
 #define DEFAULT_TEMP_UNITS TEMP_UNITS_FAHRENHEIT
 #define DEFAULT_WINDUP_GUARD 10
 #define DEFAULT_K_P 10
 #define DEFAULT_K_I 1
 #define DEFAULT_K_D 1
 #define DEFAULT_TEMP_OFFSET 0
 #define DEFAULT_IGNORE_ERROR 0
 #define DEFAULT_SETPOINT_BREW 70
 #define DEFAULT_SETPOINT_STEAM 70
 #endif
 // vim:softtabstop=4 shiftwidth=4 expandtab

display.c

➞

Show inline comments

@@ @@ -14,49 +14,49 @@ @@
 // Private function prototypes
 static void draw_setpoint(therm_status_t* status);
 // Button transition variables
 static uint8_t sw_btn_last = 0;
 static uint8_t sw_up_last = 0;
 static uint8_t sw_down_last = 0;
 static uint8_t sw_left_last = 0;
 static uint8_t sw_right_last = 0;
 // Buttonpress macros
 #define SW_BTN_PRESSED (sw_btn_last == 0 && sw_btn == 1) // rising edge on buttonpress
 #define SW_UP_PRESSED (sw_up_last == 0 && sw_up == 1)
 #define SW_DOWN_PRESSED (sw_down_last == 0 && sw_down == 1)
 #define SW_LEFT_PRESSED (sw_left_last == 0 && sw_left == 1)
 #define SW_RIGHT_PRESSED (sw_right_last == 0 && sw_right == 1)
 // States
 static uint8_t trigger_drawsetpoint = 1;
 static int16_t last_temp = 21245;
 static uint8_t goto_mode = MODE_HEAT;
-static uint8_t reset_mode = RESET_RESET;
+static uint8_t reset_mode = RESET_REBOOT;
 // Display state machine
 void display_process(therm_settings_t* set, therm_status_t* status)
+{
     uint8_t last_state = status->state;
     uint8_t temp_changed = status->temp != last_temp;
     last_temp = status->temp;
     uint8_t sw_btn = !HAL_GPIO_ReadPin(SW_BTN);
     uint8_t sw_up = !HAL_GPIO_ReadPin(SW_UP);
     uint8_t sw_down = !HAL_GPIO_ReadPin(SW_DOWN);
     uint8_t sw_left = !HAL_GPIO_ReadPin(SW_LEFT);
     uint8_t sw_right = !HAL_GPIO_ReadPin(SW_RIGHT);
     switch(status->state)
+    {
         // Idle state
         case STATE_IDLE:
+        {
             // Write text to OLED
             // [ therm :: idle ]
@@ @@ -88,49 +88,49 @@ void display_process(therm_settings_t* s @@
                 case MODE_RESET:
+                {
                     ssd1306_drawstring("-> reset    ", 1, 40);
                 } break;
 				#ifdef BOOTLOADER_SHORTCUT
                 case MODE_BOOTLOADER:
+                {
                     ssd1306_drawstring("-> dfu      ", 1, 40);
+                }
 				#endif
+            }
             // Button handler
             if(SW_BTN_PRESSED) {
                 switch(goto_mode) {
                     case MODE_HEAT:
                         status->state = STATE_PREHEAT;
                         break;
                     case MODE_SETUP:
                         status->state = STATE_SETP;
                         break;
                     case MODE_RESET:
                         status->state = STATE_RESET;
-                        reset_mode = RESET_RESET;
+                        reset_mode = RESET_REBOOT;
                         break;
 					#ifdef BOOTLOADER_SHORTCUT
                     case MODE_BOOTLOADER:
                         ssd1306_clearscreen();
                         ssd1306_drawstring("Bootloader Entered", 0, 0);
                         ssd1306_drawstring("Device won't boot", 2, 0);
                         ssd1306_drawstring("until reflashed!", 3, 0);
                         bootloader_enter(); // Resets into bootloader
                         status->state = STATE_RESET; // Just in case
                         break;
 					#endif
                     default:
                         status->state = STATE_PREHEAT;
+                }
+            }
             else if(SW_DOWN_PRESSED && goto_mode < (MODE_SIZE - 1)) {
                 goto_mode++;
+            }
             else if(SW_UP_PRESSED && goto_mode > 0) {
                 goto_mode--;
+            }
             // Event Handler
@@ @@ -436,82 +436,91 @@ void display_process(therm_settings_t* s @@
 				#endif
+            }
             else if(SW_RIGHT_PRESSED) {
                 set->val.ignore_error = 1;
                 status->state = STATE_IDLE;
+            }
             // Event Handler
             // Maybe handle if TC is plugged in
             // N/A
         } break;
         // Reset state
         case STATE_RESET:
+        {
             // Write text to OLED
             // [ therm :: reset ]
             ssd1306_drawstring("therm :: reset ", 0, 40);
             status->pid_enabled = 0;
             ssd1306_drawlogo();
             switch(reset_mode) {
-				case RESET_RESET:
+				case RESET_DEFAULTS:
+				{
-					ssd1306_drawstring("-> reset     ", 1, 40);
+					ssd1306_drawstring("-> defaults   ", 1, 40);
 				} break;
                 case RESET_BOOTLOADER:
+                {
                     ssd1306_drawstring("-> bootloader", 1, 40);
                 } break;
                 case RESET_REBOOT:
+                {
                     ssd1306_drawstring("-> reboot     ", 1, 40);
                 } break;
                 case RESET_EXIT:
+                {
                     ssd1306_drawstring("-> exit      ", 1, 40);
                 } break;
+            }
             // Button handler
             if(SW_BTN_PRESSED) {
                 switch(reset_mode) {
                     case RESET_BOOTLOADER:
+                    {
                         ssd1306_clearscreen();
                         ssd1306_drawstring("Bootloader Entered", 0, 0);
                         ssd1306_drawstring("Device won't boot", 2, 0);
                         ssd1306_drawstring("until reflashed!", 3, 0);
                         HAL_Delay(1000);
                         bootloader_enter(); // Resets into bootloader
                         status->state = STATE_RESET; // Just in case
                     } break;
-                    case RESET_RESET:
+                    case RESET_DEFAULTS:
+                    {
                         status->state = STATE_RESET;
                         flash_load_defaults(set);
                         flash_save(set);
                         NVIC_SystemReset();
                     } break;
                     case RESET_REBOOT:
+                    {
                         status->state = STATE_RESET;
                         NVIC_SystemReset();
                     } break;
                     case RESET_EXIT:
+                    {
                         status->state = STATE_IDLE;
                     } break;
+                }
+            }
             else if(SW_DOWN_PRESSED && reset_mode < (RESET_SIZE-1)) {
                 reset_mode++;
+            }
             else if(SW_UP_PRESSED && reset_mode > 0) {
                 reset_mode--;
+            }
             // Event Handler
             // N/A
         } break;
         // Something is terribly wrong
         default:
+        {
             status->state = STATE_IDLE;
             status->pid_enabled = 0;

flash.c

➞

Show inline comments

 #include "stm32f0xx_hal.h"
 #include "ssd1306.h"
 #include "stm32f0xx_hal_flash.h"
 #include "flash.h"
 __attribute__((__section__(".eeprom"))) uint16_t eeprom[512];
 #define MAGIC_NUMBER 0x0BAE
 static void __flash_write(therm_settings_t* tosave);
 #define EEPROM_MAGIC_INDEX 0
 #define EEPROM_MAGIC_VALUE 0xbeef
 void flash_save(therm_settings_t* tosave)
+{
     __flash_write(tosave);
+}
 void flash_restore(therm_settings_t* torestore)
+{
     if(eeprom[EEPROM_MAGIC_INDEX] == EEPROM_MAGIC_VALUE)
 	//read flash and calculate checksum
 	uint16_t checksum = MAGIC_NUMBER;
 	uint16_t i;
     for(i = 0; i < (sizeof(therm_settings_t)/2); i++)
+    {
         for(uint8_t i = 1; i <= 20; i++) {
             torestore->data[i] = *(eeprom+i);
 		torestore->data[i] = eeprom[i];
 		checksum ^= torestore->data[i];
+        }
+    }
     else {
         // load default settings
     //if checksum doesn't match, load default settings
     if((checksum ^ eeprom[i+1]) != 0) {
     	flash_load_defaults(torestore);
+    }
+}
 void flash_load_defaults(therm_settings_t* torestore) {
 	torestore->val.boottobrew = DEFAULT_BOOT_TO_BREW;
 	torestore->val.temp_units = DEFAULT_TEMP_UNITS;
 	torestore->val.windup_guard = DEFAULT_WINDUP_GUARD;
 	torestore->val.k_p = DEFAULT_K_P;
 	torestore->val.k_i = DEFAULT_K_I;
 	torestore->val.k_d = DEFAULT_K_D;
 	torestore->val.temp_offset = DEFAULT_TEMP_OFFSET;
 	torestore->val.ignore_error = DEFAULT_IGNORE_ERROR;
 	torestore->val.setpoint_brew = DEFAULT_SETPOINT_BREW;
 	torestore->val.setpoint_steam = DEFAULT_SETPOINT_STEAM;
+}
 static void __flash_write(therm_settings_t* tosave)
+{
     // Erase mem
     HAL_FLASH_Unlock();
     //TODO: add checksum instead of magic value
     //TODO: change checksum to invalidate flash instead of erase?
     // Erase the FLASH pages
     FLASH_EraseInitTypeDef erase;
     erase.TypeErase = TYPEERASE_PAGES;
     erase.PageAddress = (uint32_t) eeprom;
     erase.NbPages = 1;
     uint32_t SectorError = 0;
     HAL_FLASHEx_Erase(&erase, &SectorError);
     CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
     for(uint8_t i = 1; i <= (sizeof(therm_settings_t)/2); i++)
     // write to flash and calculate the checksum
     uint16_t checksum = MAGIC_NUMBER;
     uint16_t i;
     for(i = 0; i < (sizeof(therm_settings_t)/2); i++)
+	{
     	HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom + i), tosave->data[i]);
 		HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)&eeprom[i], tosave->data[i]);
     	checksum ^= tosave->data[i];
+	}
     HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom + EEPROM_MAGIC_INDEX), EEPROM_MAGIC_VALUE);
     // write the checksum
     HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)&eeprom[i+1], checksum);
     HAL_FLASH_Lock();
+}
 // vim:softtabstop=4 shiftwidth=4 expandtab

flash.h

➞

Show inline comments

 #ifndef FLASH_H
 #define FLASH_H
 #include "states.h"
 #include "stm32f0xx_hal_flash.h"
 #define PAGE_SIZE ((uint16_t)0x400)
 #define END_ADDR 0x08007FFF
 void flash_save(therm_settings_t* tosave);
 void flash_restore(therm_settings_t* tosave);
 void flash_load_defaults(therm_settings_t* torestore);
 void flash_erase(void);
 #endif

ssd1306.c

➞

Show inline comments

 #include "stm32f0xx_hal_conf.h"
 #include "ssd1306.h"
 // Write command to OLED
 static void WriteCommand(unsigned char command)
+{
   SSD_CS_Low();
   SSD_A0_Low();
   SPI_SendByte(command);
   SSD_CS_High();
+}
 // Write data to OLED
 static void WriteData(unsigned char data)
+{
   SSD_CS_Low();
   SSD_A0_High();
   SPI_SendByte(data);
   SSD_CS_High();
+}
 // Initialize OLED
 void ssd1306_init(void)
+{

ssd1306.h

➞

Show inline comments

 #ifndef   ssd1306_H
 #define   ssd1306_H
 #define   SSD_RESET       GPIOA,GPIO_PIN_3
 #define   SSD_A0          GPIOA,GPIO_PIN_4
 #define   SSD_CS          GPIOA,GPIO_PIN_2
 #define   SSD_Reset_Low()   HAL_GPIO_WritePin(SSD_RESET, 0)
 #define   SSD_Reset_High()  HAL_GPIO_WritePin(SSD_RESET, 1)
 #define   SSD_A0_Low()      HAL_GPIO_WritePin(SSD_A0, 0)
 #define   SSD_A0_High()     HAL_GPIO_WritePin(SSD_A0, 1)
 #define   SSD_CS_Low()      HAL_GPIO_WritePin(SSD_CS, 0)
 #define   SSD_CS_High()     HAL_GPIO_WritePin(SSD_CS, 1)
 // EMZ FIXME this won't really work
 #define   SPI_SendByte(data)  HAL_SPI_Transmit(spi_get(), &data, 1, 100)
 //#define SPI_SendByte(data)
 #define SPI_Wait()
 //#define   SPI_SendByte(data)  SPI_I2S_SendData(SPI1,data)
 //#define   SPI_Wait()       while(!(SPI1->SR&SPI_FLAG_TXE));while(SPI1->SR&SPI_FLAG_BSY);
 #include "stm32f0xx_hal_conf.h"
 void ssd1306_init(void);
 void ssd1306_drawchar(char ascii, unsigned char row, unsigned char xPos);
 void ssd1306_drawcharbig(char ascii, unsigned char row, unsigned char xPos);
 void ssd1306_drawstring(const char *dataPtr, unsigned char row, unsigned char xPos);
 void ssd1306_drawstringbig(const char *dataPtr, unsigned char row, unsigned char xPos);
 void ssd1306_drawlogo();
 void ssd1306_clearscreen();
 #endif
 // vim:softtabstop=4 shiftwidth=4 expandtab

states.h

➞

Show inline comments

 #ifndef STATES_H
 #define STATES_H
 #include "stm32f0xx_hal.h"
 #include "config.h"
 typedef struct {
     int32_t temp;
     uint8_t temp_frac;
     uint8_t state_resume;
     uint8_t state;
     int32_t setpoint;
     uint8_t pid_enabled;
     uint8_t error_code;
 } therm_status_t;
 typedef union
+{
      struct {
         uint32_t boottobrew;
         uint32_t temp_units;
         uint32_t windup_guard;
         uint32_t k_p;
         uint32_t k_i;
         uint32_t k_d;
         int32_t temp_offset;
         uint32_t ignore_error;
         int32_t setpoint_brew;
@@ @@ -45,31 +46,32 @@ enum state { @@
     STATE_SETSTEPS,
     STATE_SETWINDUP,
     STATE_SETBOOTTOBREW,
     STATE_SETUNITS,
     STATE_SETTEMPOFFSET,
     STATE_PREHEAT,
     STATE_MAINTAIN,
     STATE_TC_ERROR,
 	STATE_RESET,
 };
 enum GOTO_MODE {
 	#ifdef BOOTLOADER_SHORTCUT
 	MODE_BOOTLOADER,
 	#endif
 	MODE_HEAT,
 	MODE_SETUP,
 	MODE_RESET,
 	MODE_SIZE,
 };
 enum RESET_MODE {
 	RESET_RESET = 0,
 	RESET_REBOOT = 0,
 	RESET_DEFAULTS,
 	RESET_BOOTLOADER,
 	RESET_EXIT,
 	RESET_SIZE,
 };
 #endif

0 comments (0 inline, 0 general)