therm Changeset - 8e1189ce73af · protofusion repositories

Changeset - 8e1189ce73af

Parent rev.

Child rev.

[Not reviewed]

cortex-f0

0 5 0

matthewreed - 9 years ago 2015-12-19 23:49:07

Fixed settings save and restore in flash

5 files changed with 46 insertions and 40 deletions:

config.h

display.c

flash.c

flash.h

main.c

0 comments (0 inline, 0 general)

config.h

➞

Show inline comments

@@ @@ -26,15 +26,27 @@ @@
 #define SW_DOWN GPIOB, GPIO_PIN_3
 #define SW_LEFT GPIOB, GPIO_PIN_5
 #define SW_RIGHT GPIOB, GPIO_PIN_6
 #define SSR_PIN GPIOA, GPIO_PIN_1
 // Visual niceness
 #define hal_init() HAL_Init()
 // Add bootloader option to top of idle screen menu
 #define BOOTLOADER_SHORTCUT
 #define DEFAULT_BOOT_TO_BREW 0
 #define DEFAULT_TEMP_UNITS TEMP_UNITS_FAHRENHEIT
 #define DEFAULT_WINDUP_GUARD 10
 #define DEFAULT_K_P 10
 #define DEFAULT_K_I 1
 #define DEFAULT_K_D 1
 #define DEFAULT_IGNORE_ERROR 0
 #define DEFAULT_SETPOINT_BREW 70
 #define DEFAULT_SETPOINT_STEAM 70
 #endif
 // vim:softtabstop=4 shiftwidth=4 expandtab

display.c

➞

Show inline comments

@@ @@ -328,25 +328,25 @@ void display_process(therm_settings_t* s @@
             ssd1306_drawlogo();
             char tempstr[6];
             itoa(set->val.temp_offset, tempstr, 10);
             ssd1306_drawstring("O=", 1, 45);
             ssd1306_drawstring("    ", 1, 57);
             ssd1306_drawstring(tempstr, 1, 57);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
-                flash_save(&set);
                 flash_save(set);
                 status->state = STATE_IDLE;
+            }
             else {
                 user_input_signed(&set->val.temp_offset);
+            }
             // Event Handler
             // N/A
         } break;
@@ @@ -478,25 +478,26 @@ void display_process(therm_settings_t* s @@
+                    {
                         ssd1306_clearscreen();
                         ssd1306_drawstring("Bootloader Entered", 0, 0);
                         ssd1306_drawstring("Device won't boot", 2, 0);
                         ssd1306_drawstring("until reflashed!", 3, 0);
                         HAL_Delay(1000);
                         bootloader_enter(); // Resets into bootloader
                         status->state = STATE_RESET; // Just in case
                     } break;
                     case RESET_RESET:
+                    {
                         status->state = STATE_RESET;
                         //flash_erase();
                         flash_load_defaults(set);
                         flash_save(set);
                         NVIC_SystemReset();
                     } break;
                     case RESET_EXIT:
+                    {
                         status->state = STATE_IDLE;
                     } break;
+                }
+            }
             else if(SW_DOWN_PRESSED && reset_mode < (RESET_SIZE-1)) {
                 reset_mode++;
+            }
             else if(SW_UP_PRESSED && reset_mode > 0) {

flash.c

➞

Show inline comments

 #include "stm32f0xx_hal.h"
 #include "ssd1306.h"
 #include "stm32f0xx_hal_flash.h"
 #include "flash.h"
 __attribute__((__section__(".eeprom"))) uint16_t eeprom[512];
 static void __flash_write(therm_settings_t* tosave);
-#define EEPROM_MAGIC_INDEX 16
+#define EEPROM_MAGIC_INDEX 0
 #define EEPROM_MAGIC_VALUE 0xbeef
 void flash_save(therm_settings_t* tosave)
+{
     ssd1306_clearscreen();
     ssd1306_drawstring("Erase...", 0, 0);
     HAL_Delay(100);
     ssd1306_drawstring("Save...", 1, 0);
     __flash_write(tosave);
     HAL_Delay(100);
     ssd1306_drawstring("Done!", 2, 0);
     HAL_Delay(500);
+}
 void flash_restore(therm_settings_t *torestore)
+{
     ssd1306_clearscreen();
     ssd1306_drawstring("READING SAVE", 1, 0);
-    if(eeprom[EEPROM_MAGIC_INDEX] != EEPROM_MAGIC_VALUE)
+    if(eeprom[EEPROM_MAGIC_INDEX] == EEPROM_MAGIC_VALUE)
+    {
         ssd1306_drawstring("No data to read!", 2, 0);
         return;
         for(uint8_t i = 1; i <= 20; i++) {
             torestore->data[i] = *(eeprom+i);
+        }
+    }
     else {
         // load default settings
     	flash_load_defaults(torestore);
+    }
     uint16_t i;
     for(i=0;i<128;i++)
         torestore->data[i] = *(eeprom+i);
+}
 void flash_load_defaults(therm_settings_t* torestore) {
     ssd1306_drawstring("READ COMPLETE", 3, 0);
 	torestore->val.boottobrew = DEFAULT_BOOT_TO_BREW;
 	torestore->val.temp_units = DEFAULT_TEMP_UNITS;
 	torestore->val.windup_guard = DEFAULT_WINDUP_GUARD;
 	torestore->val.k_p = DEFAULT_K_P;
 	torestore->val.k_i = DEFAULT_K_I;
 	torestore->val.k_d = DEFAULT_K_D;
 	torestore->val.ignore_error = DEFAULT_IGNORE_ERROR;
 	torestore->val.setpoint_brew = DEFAULT_SETPOINT_BREW;
 	torestore->val.setpoint_steam = DEFAULT_SETPOINT_STEAM;
+}
 static void __flash_write(therm_settings_t* tosave)
+{
     // Erase mem
     HAL_FLASH_Unlock();
     //TODO: add checksum instead of magic value
     //TODO: change checksum to invalidate flash instead of erase?
     // Erase the FLASH pages
     FLASH_EraseInitTypeDef erase;
     erase.TypeErase = TYPEERASE_PAGES;
     erase.PageAddress = eeprom;
+    erase.PageAddress = (uint32_t) eeprom;
     erase.NbPages = 1;
     uint32_t SectorError = 0;
     HAL_FLASHEx_Erase(&erase, &SectorError);
     CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
     uint16_t i;
 //    for(i=1;i<20;i++)
  //   {
   //      HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, eeprom+i, tosave->data[i]);
    // }
     HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, eeprom + EEPROM_MAGIC_INDEX, EEPROM_MAGIC_VALUE);
     for(uint8_t i = 1; i <= (sizeof(therm_settings_t)/2); i++)
+	{
     	HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom + i), tosave->data[i]);
+	}
     HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom + EEPROM_MAGIC_INDEX), EEPROM_MAGIC_VALUE);
     HAL_FLASH_Lock();
+}
 // vim:softtabstop=4 shiftwidth=4 expandtab

flash.h

➞

Show inline comments

 #ifndef FLASH_H
 #define FLASH_H
 #include "states.h"
 #define PAGE_SIZE ((uint16_t)0x400)
 #define END_ADDR 0x08007FFF
 void flash_save(therm_settings_t* tosave);
 void flash_restore(therm_settings_t *tosave);
 void flash_load_defaults(therm_settings_t* torestore);
 void flash_erase(void);
 #endif

main.c

➞

Show inline comments

@@ @@ -48,35 +48,24 @@ int main(void) @@
     // Init SPI busses
     spi_init();
     #ifdef MAX31865_RTD_SENSOR
     max31865_config(spi_get());
     #endif
     // Init OLED over SPI
     ssd1306_init();
     ssd1306_clearscreen();
     // Default settings
     set.val.boottobrew = 0;
     set.val.temp_units = TEMP_UNITS_FAHRENHEIT;
     set.val.windup_guard = 10;
     set.val.k_p = 10;
     set.val.k_i = 1;
     set.val.k_d = 1;
     set.val.ignore_error = 0;
     set.val.setpoint_brew = 70;
     set.val.setpoint_steam = 70;
     // Default status
     status.temp = 0;
     status.temp_frac = 0;
     status.state_resume = 0;
     status.state = STATE_IDLE;
     status.setpoint = 70;
     status.pid_enabled = 0;
     // Go to brew instead of idle if configured thusly
     if(set.val.boottobrew)
       status.state = STATE_PREHEAT;

0 comments (0 inline, 0 general)