therm Changeset - a3acc7c3a063 · protofusion repositories

Changeset - a3acc7c3a063

Parent rev.

Child rev.

[Not reviewed]

cortex-f0

4 2 3

Ethan Zonca - 11 years ago 2015-01-03 00:12:55
ez@ethanzonca.com

Removed old system files, fixed _it files

8 files changed with 162 insertions and 597 deletions:

Makefile

platform_config.h

stm32f0xx_conf.h

stm32f0xx_it.c

stm32f0xx_it.h

stm32l1xx_it.h

system_stm32l1xx.c

399

system_stm32l1xx.h

106

0 comments (0 inline, 0 general)

Makefile

➞

Show inline comments

@@ @@ -12,51 +12,50 @@ USBDRV:=USB @@
 STD_PERIPH:=$(STMLIB)/STM32F0xx_StdPeriph_Driver
 STARTUP:=$(STMLIB)/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7
 LINKER_SCRIPT:=$(CURDIR)/stm32-flash.ld
 #LINKER_SCRIPT:=$(CURDIR)/../stm32_flash.ld
 INCLUDE=-I$(CURDIR)
 INCLUDE+=-I$(STMLIB)/CMSIS/Include
 INCLUDE+=-I$(STMLIB)/CMSIS/Device/ST/STM32F0xx/Include
 INCLUDE+=-I$(STD_PERIPH)/inc
 INCLUDE+=-I$(STMLIB)/$(OLEDDRV)
 INCLUDE+=-I$(STMLIB)/$(USBDRV)
 # vpath is used so object files are written to the current directory instead
 # of the same directory as their source files
 vpath %.c $(DISCOVERY) $(STD_PERIPH)/src \
           $(STMLIB)/USB \
           $(STMLIB)/STM32_USB-FS_Device_Library/Class/hid/src \
           $(STMLIB)/STM32_USB-FS_Device_Library/Core/src
 vpath %.s $(STARTUP)
 ASRC=startup_stm32f042.s
 # Project Source Files
 SRC=main.c
 SRC+=stm32l1xx_it.c
 SRC+=system_stm32l1xx.c
 SRC+=stm32l100c_discovery.c
 SRC+=stm32f0xx_it.c
 SRC+=system_stm32f0xx.c
 SRC+=ssd1306.c
 SRC+=eeprom_min.c
 SRC+=gpio.c
 SRC+=spi.c
 SRC+=stringhelpers.c
 # Discovery Source Files
 #SRC+=stm32f4_discovery_lis302dl.c
 #SRC+=stm32f4_discovery.c
 #SRC+=stm32f4_discovery_audio_codec.c
 # Standard Peripheral Source Files
 SRC+=stm32f0xx_syscfg.c
 SRC+=misc.c
 SRC+=stm32f0xx_adc.c
 SRC+=stm32f0xx_dac.c
 SRC+=stm32f0xx_dma.c
 SRC+=stm32f0xx_exti.c
 SRC+=stm32f0xx_flash.c
 SRC+=stm32f0xx_gpio.c
 SRC+=stm32f0xx_i2c.c
 SRC+=stm32f0xx_rcc.c
 SRC+=stm32f0xx_spi.c
 SRC+=stm32f0xx_tim.c

platform_config.h

➞

Show inline comments

@@ @@ -10,49 +10,49 @@ @@
+  *
   * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
   * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
   * You may not use this file except in compliance with the License.
   * You may obtain a copy of the License at:
+  *
   *        http://www.st.com/software_license_agreement_liberty_v2
+  *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
+  *
   ******************************************************************************
   */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __PLATFORM_CONFIG_H
 #define __PLATFORM_CONFIG_H
 /* Includes ------------------------------------------------------------------*/
-#include "stm32l1xx.h"
+#include "stm32f0xx.h"
 /* Exported types ------------------------------------------------------------*/
 /*Unique Devices IDs register set*/
 #define         ID1          (0x1FF80050)
 #define         ID2          (0x1FF80054)
 #define         ID3          (0x1FF80064)
 #if !defined(USB_USE_EXTERNAL_PULLUP)
   #define STM32L15_USB_CONNECT                SYSCFG_USBPuCmd(ENABLE)
   #define STM32L15_USB_DISCONNECT             SYSCFG_USBPuCmd(DISABLE)
 #elif defined(USB_USE_EXTERNAL_PULLUP)
   /* PA0 is chosen just as illustrating example, you should modify the defines
     below according to your hardware configuration. */
   #define USB_DISCONNECT                      GPIOA
   #define USB_DISCONNECT_PIN                  GPIO_Pin_0
   #define RCC_AHBPeriph_GPIO_DISCONNECT       RCC_AHBPeriph_GPIOA
   #define STM32L15_USB_CONNECT                GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)
   #define STM32L15_USB_DISCONNECT             GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)
 #endif /* USB_USE_EXTERNAL_PULLUP */
 /* Exported macro ------------------------------------------------------------*/
 /* Exported functions ------------------------------------------------------- */

stm32f0xx_conf.h

➞

Show inline comments

@@ new file 100644 @@
 /**
   ******************************************************************************
   * @file    stm32F0xx_conf.h
   * @author  MCD Application Team
   * @version V1.0.0
   * @date    23-March-2012
   * @brief   Library configuration file.
   ******************************************************************************
   * @attention
+  *
   * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
+  *
   * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
   * You may not use this file except in compliance with the License.
   * You may obtain a copy of the License at:
+  *
   *        http://www.st.com/software_license_agreement_liberty_v2
+  *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
+  *
   ******************************************************************************
   */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F0XX_CONF_H
 #define __STM32F0XX_CONF_H
 /* Includes ------------------------------------------------------------------*/
 /* Comment the line below to disable peripheral header file inclusion */
 /* #include "stm32f0xx_adc.h" */
 #include "stm32f0xx_cec.h"
 #include "stm32f0xx_crc.h"
 #include "stm32f0xx_comp.h"
 #include "stm32f0xx_dac.h"
 #include "stm32f0xx_dbgmcu.h"
 #include "stm32f0xx_dma.h"
 #include "stm32f0xx_exti.h"
 #include "stm32f0xx_flash.h"
 #include "stm32f0xx_gpio.h"
 #include "stm32f0xx_syscfg.h"
 #include "stm32f0xx_i2c.h"
 #include "stm32f0xx_iwdg.h"
 #include "stm32f0xx_pwr.h"
 #include "stm32f0xx_rcc.h"
 #include "stm32f0xx_rtc.h"
 #include "stm32f0xx_spi.h"
 #include "stm32f0xx_tim.h"
 #include "stm32f0xx_usart.h"
 #include "stm32f0xx_wwdg.h"
 #include "stm32f0xx_misc.h"  /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
 /* Exported types ------------------------------------------------------------*/
 /* Exported constants --------------------------------------------------------*/
 /* Uncomment the line below to expanse the "assert_param" macro in the
    Standard Peripheral Library drivers code */
 /* #define USE_FULL_ASSERT    1 */
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
   * @param  expr: If expr is false, it calls assert_failed function which reports
   *         the name of the source file and the source line number of the call
   *         that failed. If expr is true, it returns no value.
   * @retval None
   */
   #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
   void assert_failed(uint8_t* file, uint32_t line);
 #else
   #define assert_param(expr) ((void)0)
 #endif /* USE_FULL_ASSERT */
 #endif /* __STM32F0XX_CONF_H */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

stm32f0xx_it.c

➞

Show inline comments

@@ file renamed from stm32l1xx_it.c to stm32f0xx_it.c @@
 /**
   ******************************************************************************
-  * @file    stm32l1xx_it.c
+  * @file    stm32f0xx_it.c
   * @author  MCD Application Team
   * @version V1.0.0
   * @date    29-July-2013
   * @brief   Main Interrupt Service Routines.
   *          This file provides template for all exceptions handler and
   *          peripherals interrupt service routine.
   ******************************************************************************
   * @attention
+  *
   * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
   * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
   * You may not use this file except in compliance with the License.
   * You may obtain a copy of the License at:
+  *
   *        http://www.st.com/software_license_agreement_liberty_v2
+  *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
+  *
   ******************************************************************************
   */
 /* Includes ------------------------------------------------------------------*/
 #include "hw_config.h"
-#include "stm32l1xx_it.h"
+#include "stm32f0xx_it.h"
 #include "main.h"
 #include "usb_lib.h"
 #include "usb_istr.h"
 /** @addtogroup STM32L100C-Discovery_Demo
   * @{
   */
 //#include "usb_lib.h"
 //#include "usb_istr.h"
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
 /* Private functions ---------------------------------------------------------*/
 /******************************************************************************/
 /*            Cortex-M3 Processor Exceptions Handlers                         */
 /******************************************************************************/
 /**
   * @brief  This function handles NMI exception.
   * @param  None
   * @retval None
   */
 void NMI_Handler(void)
+{
+}
 /**
   * @brief  This function handles Hard Fault exception.
   * @param  None
@@ @@ -139,71 +135,64 @@ void PendSV_Handler(void) @@
 /**
   * @brief  This function handles SysTick Handler.
   * @param  None
   * @retval None
   */
 void SysTick_Handler(void)
+{
   TimingDelay_Decrement();
+}
 /*******************************************************************************
 * Function Name  : USB_IRQHandler
 * Description    : This function handles USB Low Priority interrupts
 *                  requests.
 * Input          : None
 * Output         : None
 * Return         : None
 *******************************************************************************/
 void USB_LP_IRQHandler(void)
+{
   USB_Istr();
+}
 //void USB_LP_IRQHandler(void)
 //{
 //  USB_Istr();
 //}
 /*******************************************************************************
 * Function Name  : USB_FS_WKUP_IRQHandler
 * Description    : This function handles USB WakeUp interrupt request.
 * Input          : None
 * Output         : None
 * Return         : None
 *******************************************************************************/
 void USB_FS_WKUP_IRQHandler(void)
+{
   EXTI_ClearITPendingBit(EXTI_Line18);
+}
 //void USB_FS_WKUP_IRQHandler(void)
 //{
 //  EXTI_ClearITPendingBit(EXTI_Line18);
 //}
 /******************************************************************************/
 /*                 STM32L1xx Peripherals Interrupt Handlers                   */
 /*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
 /*  available peripheral interrupt handler's name please refer to the startup */
 /*  file (startup_stm32l1xx_xx.s).                                            */
 /******************************************************************************/
 /**
   * @brief  This function handles PPP interrupt request.
   * @param  None
   * @retval None
   */
 /*void PPP_IRQHandler(void)
+{
 }*/
 /**
   * @}
   */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

stm32f0xx_it.h

➞

Show inline comments

@@ new file 100644 @@
 /**
   ******************************************************************************
   * @file    stm32f0xx_it.h
   * @author  MCD Application Team
   * @version V1.0.0
   * @date    29-July-2013
   * @brief   This file contains the headers of the interrupt handlers.
   ******************************************************************************
   * @attention
+  *
   * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
   * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
   * You may not use this file except in compliance with the License.
   * You may obtain a copy of the License at:
+  *
   *        http://www.st.com/software_license_agreement_liberty_v2
+  *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
+  *
   ******************************************************************************
   */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F0xx_IT_H
 #define __STM32F0xx_IT_H
 #ifdef __cplusplus
  extern "C" {
 #endif
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f0xx.h"
 #include "platform_config.h"
 /* Exported types ------------------------------------------------------------*/
 /* Exported constants --------------------------------------------------------*/
 /* Exported macro ------------------------------------------------------------*/
 /* Exported functions ------------------------------------------------------- */
 void NMI_Handler(void);
 void HardFault_Handler(void);
 void MemManage_Handler(void);
 void BusFault_Handler(void);
 void UsageFault_Handler(void);
 void SVC_Handler(void);
 void DebugMon_Handler(void);
 void PendSV_Handler(void);
 void SysTick_Handler(void);
 void USBWakeUp_IRQHandler(void);
 void USB_FS_WKUP_IRQHandler(void);
 #ifdef __cplusplus
+}
 #endif
 #endif /* __STM32F0xx_IT_H */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

stm32l1xx_it.h

➞

Show inline comments

deleted file

system_stm32l1xx.c

➞

Show inline comments

deleted file

system_stm32l1xx.h

➞

Show inline comments

deleted file

0 comments (0 inline, 0 general)