TARGET:=therm

TOOLCHAIN_PATH:=/usr/bin

TOOLCHAIN_PREFIX:=arm-none-eabi

OPTLVL:=3 # Optimization level, can be [0, 1, 2, 3, s].

#PROJECT_NAME:=$(notdir $(lastword $(CURDIR)))

TOP:=$(shell readlink -f "../..")

STMLIB:=libraries

OLEDDRV:=oleddrv

USBDRV:=USB

STD_PERIPH:=$(STMLIB)/STM32F0xx_StdPeriph_Driver

STARTUP:=$(STMLIB)/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc_ride7

LINKER_SCRIPT:=$(CURDIR)/stm32-flash.ld

#LINKER_SCRIPT:=$(CURDIR)/../stm32_flash.ld

INCLUDE=-I$(CURDIR)

INCLUDE+=-I$(STMLIB)/CMSIS/Include

INCLUDE+=-I$(STMLIB)/CMSIS/Device/ST/STM32F0xx/Include

INCLUDE+=-I$(STD_PERIPH)/inc

INCLUDE+=-I$(STMLIB)/$(OLEDDRV)

INCLUDE+=-I$(STMLIB)/$(USBDRV)

# vpath is used so object files are written to the current directory instead

# of the same directory as their source files

vpath %.c $(DISCOVERY) $(STD_PERIPH)/src \

          $(STMLIB)/USB \

          $(STMLIB)/STM32_USB-FS_Device_Library/Class/hid/src \

          $(STMLIB)/STM32_USB-FS_Device_Library/Core/src

vpath %.s $(STARTUP)

ASRC=startup_stm32f042.s

# Project Source Files

SRC=main.c

SRC+=ssd1306.c

SRC+=eeprom_min.c

SRC+=gpio.c

SRC+=spi.c

SRC+=stringhelpers.c

# Discovery Source Files

#SRC+=stm32f4_discovery_lis302dl.c

#SRC+=stm32f4_discovery.c

#SRC+=stm32f4_discovery_audio_codec.c

# Standard Peripheral Source Files

SRC+=stm32f0xx_syscfg.c

SRC+=misc.c

SRC+=stm32f0xx_adc.c

SRC+=stm32f0xx_dac.c

SRC+=stm32f0xx_dma.c

SRC+=stm32f0xx_exti.c

SRC+=stm32f0xx_flash.c

SRC+=stm32f0xx_gpio.c

SRC+=stm32f0xx_i2c.c

SRC+=stm32f0xx_rcc.c

SRC+=stm32f0xx_spi.c

SRC+=stm32f0xx_tim.c

# USB Source Files

SRC+=usb_core.c

SRC+=usb_init.c

SRC+=usb_int.c

SRC+=usb_mem.c

SRC+=usb_regs.c

SRC+=usb_sil.c

SRC+=hw_config.c

SRC+=usb_desc.c

SRC+=usb_endp.c

SRC+=usb_istr.c

SRC+=usb_prop.c

SRC+=usb_pwr.c

CDEFS=-DUSE_STDPERIPH_DRIVER

CDEFS+=-DSTM32F0XX

CDEFS+=-DMANGUSTA_DISCOVERY

#CDEFS+=-DUSE_USB_OTG_FS

# EMZ FIXME

CDEFS+=-DHSE_VALUE=8000000

#EMZ Optimized: 

MCUFLAGS=-mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections -mfloat-abi=soft

# Default:  MCUFLAGS=-mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections

#MCUFLAGS=-mcpu=cortex-m4 -mthumb -mlittle-endian -mfpu=fpa -mfloat-abi=hard -mthumb-interwork

#MCUFLAGS=-mcpu=cortex-m4 -mfpu=vfpv4-sp-d16 -mfloat-abi=hard

COMMONFLAGS=-O$(OPTLVL) -g -Wall

CFLAGS=$(COMMONFLAGS) $(MCUFLAGS) $(INCLUDE) $(CDEFS)

LDLIBS=

LDFLAGS=$(COMMONFLAGS) -fno-exceptions -ffunction-sections -fdata-sections \

        -nostartfiles -Wl,--gc-sections,-T$(LINKER_SCRIPT)

#####

#####

OBJ = $(SRC:%.c=%.o) $(ASRC:%.s=%.o)

CC=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_PREFIX)-gcc

LD=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_PREFIX)-gcc

OBJCOPY=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_PREFIX)-objcopy

AS=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_PREFIX)-as

AR=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_PREFIX)-ar

GDB=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_PREFIX)-gdb

SIZE=$(TOOLCHAIN_PATH)/$(TOOLCHAIN_PREFIX)-size

all: $(OBJ)

	$(CC) -o $(TARGET).elf $(LDFLAGS) $(OBJ)	$(LDLIBS)

	$(OBJCOPY) -O ihex   $(TARGET).elf $(TARGET).hex

	$(OBJCOPY) -O binary $(TARGET).elf $(TARGET).bin

.PHONY: clean

clean:

	rm -f $(OBJ)

	rm -f $(TARGET).elf

	rm -f $(TARGET).hex

	rm -f $(TARGET).bin

# Display size

size: $(TARGET).elf

	@echo Invoking: ARM GNU Print Size

	$(SIZE) --format=berkeley $<

	@echo

/**

  ******************************************************************************

  * @file    platform_config.h

  * @author  MCD Application Team

  * @version V4.0.0

  * @date    21-January-2013

  * @brief   Evaluation board specific configuration file.

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>

  *

  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");

  * You may not use this file except in compliance with the License.

  * You may obtain a copy of the License at:

  *

  *        http://www.st.com/software_license_agreement_liberty_v2

  *

  * Unless required by applicable law or agreed to in writing, software 

  * distributed under the License is distributed on an "AS IS" BASIS, 

  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

  * See the License for the specific language governing permissions and

  * limitations under the License.

  *

  ******************************************************************************

  */

/* Define to prevent recursive inclusion -------------------------------------*/

#ifndef __PLATFORM_CONFIG_H

#define __PLATFORM_CONFIG_H

/* Includes ------------------------------------------------------------------*/

/* Exported types ------------------------------------------------------------*/

/*Unique Devices IDs register set*/

#define         ID1          (0x1FF80050)

#define         ID2          (0x1FF80054)

#define         ID3          (0x1FF80064)

#if !defined(USB_USE_EXTERNAL_PULLUP)

  #define STM32L15_USB_CONNECT                SYSCFG_USBPuCmd(ENABLE)

  #define STM32L15_USB_DISCONNECT             SYSCFG_USBPuCmd(DISABLE)

#elif defined(USB_USE_EXTERNAL_PULLUP)

  /* PA0 is chosen just as illustrating example, you should modify the defines

    below according to your hardware configuration. */ 

  #define USB_DISCONNECT                      GPIOA

  #define USB_DISCONNECT_PIN                  GPIO_Pin_0

  #define RCC_AHBPeriph_GPIO_DISCONNECT       RCC_AHBPeriph_GPIOA

  #define STM32L15_USB_CONNECT                GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)

  #define STM32L15_USB_DISCONNECT             GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)

#endif /* USB_USE_EXTERNAL_PULLUP */

/* Exported macro ------------------------------------------------------------*/

/* Exported functions ------------------------------------------------------- */

#endif /* __PLATFORM_CONFIG_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

/**

  ******************************************************************************

  * @author  MCD Application Team

  * @version V1.0.0

  * @date    29-July-2013

  * @brief   Main Interrupt Service Routines.

  *          This file provides template for all exceptions handler and 

  *          peripherals interrupt service routine.

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>

  *

  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");

  * You may not use this file except in compliance with the License.

  * You may obtain a copy of the License at:

  *

  *        http://www.st.com/software_license_agreement_liberty_v2

  *

  * Unless required by applicable law or agreed to in writing, software 

  * distributed under the License is distributed on an "AS IS" BASIS, 

  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

  * See the License for the specific language governing permissions and

  * limitations under the License.

  *

  ******************************************************************************

  */

/* Includes ------------------------------------------------------------------*/

#include "hw_config.h"

#include "main.h"

/* Private typedef -----------------------------------------------------------*/

/* Private define ------------------------------------------------------------*/

/* Private macro -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* Private function prototypes -----------------------------------------------*/

/* Private functions ---------------------------------------------------------*/

/******************************************************************************/

/*            Cortex-M3 Processor Exceptions Handlers                         */

/******************************************************************************/

/**

  * @brief  This function handles NMI exception.

  * @param  None

  * @retval None

  */

void NMI_Handler(void)

{

}

/**

  * @brief  This function handles Hard Fault exception.

  * @param  None

  * @retval None

  */

void HardFault_Handler(void)

{

  /* Go to infinite loop when Hard Fault exception occurs */

  while (1)

  {

  }

}

/**

  * @brief  This function handles Memory Manage exception.

  * @param  None

  * @retval None

  */

void MemManage_Handler(void)

{

  /* Go to infinite loop when Memory Manage exception occurs */

  while (1)

  {

  }

}

/**

  * @brief  This function handles Bus Fault exception.

  * @param  None

  * @retval None

  */

void BusFault_Handler(void)

{

  /* Go to infinite loop when Bus Fault exception occurs */

  while (1)

  {

  }

}

/**

  * @brief  This function handles Usage Fault exception.

  * @param  None

  * @retval None

  */

void UsageFault_Handler(void)

{

  /* Go to infinite loop when Usage Fault exception occurs */

  while (1)

  {

  }

}

/**

  * @brief  This function handles SVCall exception.

  * @param  None

  * @retval None

  */

void SVC_Handler(void)

{

}

/**

  * @brief  This function handles Debug Monitor exception.

  * @param  None

  * @retval None

  */

void DebugMon_Handler(void)

{

}

/**

  * @brief  This function handles PendSVC exception.

  * @param  None

  * @retval None

  */

void PendSV_Handler(void)

{

}

/**

  * @brief  This function handles SysTick Handler.

  * @param  None

  * @retval None

  */

void SysTick_Handler(void)

{

  TimingDelay_Decrement();

}

/*******************************************************************************

* Function Name  : USB_IRQHandler

* Description    : This function handles USB Low Priority interrupts

*                  requests.

* Input          : None

* Output         : None

* Return         : None

*******************************************************************************/

/*******************************************************************************

* Function Name  : USB_FS_WKUP_IRQHandler

* Description    : This function handles USB WakeUp interrupt request.

* Input          : None

* Output         : None

* Return         : None

*******************************************************************************/

/******************************************************************************/

/*                 STM32L1xx Peripherals Interrupt Handlers                   */

/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */

/*  available peripheral interrupt handler's name please refer to the startup */

/*  file (startup_stm32l1xx_xx.s).                                            */

/******************************************************************************/

/**

  * @brief  This function handles PPP interrupt request.

  * @param  None

  * @retval None

  */

/*void PPP_IRQHandler(void)

{

}*/

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/