Files
@ 006118896f88
Branch filter:
Location: therm/libraries/STM32F0xx_CPAL_Driver/inc/stm32f0xx_i2c_cpal_hal.h
006118896f88
32.3 KiB
text/plain
Remove old _it
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 | /**
******************************************************************************
* @file stm32f0xx_i2c_cpal_hal.h
* @author MCD Application Team
* @version V1.2.0
* @date 24-July-2014
* @brief This file contains all the functions prototypes for the CPAL_I2C_HAL
* firmware layer.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef ___STM32F0XX_I2C_CPAL_HAL_H
#define ___STM32F0XX_I2C_CPAL_HAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
/*========= STM32 Standard library files includes =========*/
#include "stm32f0xx.h"
#include "stm32f0xx_i2c.h"
#include "stm32f0xx_dma.h"
#include "stm32f0xx_gpio.h"
#include "stm32f0xx_rcc.h"
#include "stm32f0xx_misc.h"
/*========= CPAL library files includes =========*/
#include "stm32f0xx_i2c_cpal.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/*======================================================================================================================================
CPAL Hardware Configuration
========================================================================================================================================*/
/* ------ Configure the communication device and all related peripherals ( GPIO Pin, DMA Channels,
NVIC Priority) with this file, by referring to configuration Sections:
- Section 1 : Select the pins to be used for each device instance.
- Section 2 : Select TX and RX DMA Channels (if DMA mode will be used).
- Section 3 : Set device's Events, Errors and DMA Interrupts Priorities. */
/*-----------------------------------------------------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------------------------------------------------*/
/* -- Section 1 : **** Device IO Pins Selection ****
Description: This section allows user to choose IO Pins for each device if possible (in accordance with
used product: some products have only one possibility for the IO pins).
Each device instance (I2C1, I2C2 ..) has its specific defines: one for each Pin.
For each device instance, you will change existing defines with adequate IO Pins and Port
( Refer to Product Pin mapping in related datasheet).*/
/* To configure SCL and SDA Pin change these defines with adequate value :
#define CPAL_I2C1_SCL_GPIO_PORT GPIOX (X : Name of the GPIO PORT (A,B,C,....))
#define CPAL_I2C1_SCL_GPIO_CLK RCC_APB2Periph_GPIOX (X : Name of the GPIO PORT (A,B,C,....))
#define CPAL_I2C1_SCL_GPIO_PIN GPIO_Pin_X (X : Pin number (1,2,3,....))
#define CPAL_I2C1_SCL_GPIO_PINSOURCE GPIO_PinSourceX (X : Pin number (1,2,3,....))
#define CPAL_I2C1_SDA_GPIO_PORT GPIOX (X : Name of the GPIO PORT (A,B,C,....))
#define CPAL_I2C1_SDA_GPIO_CLK RCC_APB2Periph_GPIOX (X : Name of the GPIO PORT (A,B,C,....))
#define CPAL_I2C1_SDA_GPIO_PIN GPIO_Pin_X (X : Pin number (1,2,3,....))
#define CPAL_I2C1_SDA_GPIO_PINSOURCE GPIO_PinSourceX (X : Pin number (1,2,3,....)) */
/* IO Pins selection possibilities
|--------|---------|--------------|-----------|------------------|-------------------------|
| Device | I2C PIN | GPIO_PIN | GPIO_PORT | GPIO_PinSource | GPIO_CLK |
|--------|---------|--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_6 | GPIOB | GPIO_PinSource6 | RCC_AHBPeriph_GPIOB |
| | SCL |--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_8 | GPIOB | GPIO_PinSource8 | RCC_AHBPeriph_GPIOB |
| I2C1 |---------|--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_7 | GPIOB | GPIO_PinSource7 | RCC_AHBPeriph_GPIOB |
| | SDA |--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_9 | GPIOB | GPIO_PinSource9 | RCC_AHBPeriph_GPIOB |
|--------|---------|--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_10 | GPIOB | GPIO_PinSource10 | RCC_AHBPeriph_GPIOB |
| | SCL |--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_6 | GPIOF | GPIO_PinSource6 | RCC_AHBPeriph_GPIOF |
| I2C2 |---------|--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_11 | GPIOB | GPIO_PinSource11 | RCC_AHBPeriph_GPIOB |
| | SDA |--------------|-----------|------------------|-------------------------|
| | | GPIO_Pin_7 | GPIOF | GPIO_PinSource9 | RCC_AHBPeriph_GPIOF |
|--------|---------|--------------|-----------|------------------|-------------------------|
*/
/*----------- I2C1 Device -----------*/
#define CPAL_I2C1_SCL_GPIO_PORT GPIOB
#define CPAL_I2C1_SCL_GPIO_CLK RCC_AHBPeriph_GPIOB
#define CPAL_I2C1_SCL_GPIO_PIN GPIO_Pin_6
#define CPAL_I2C1_SCL_GPIO_PINSOURCE GPIO_PinSource6
#define CPAL_I2C1_SDA_GPIO_PORT GPIOB
#define CPAL_I2C1_SDA_GPIO_CLK RCC_AHBPeriph_GPIOB
#define CPAL_I2C1_SDA_GPIO_PIN GPIO_Pin_7
#define CPAL_I2C1_SDA_GPIO_PINSOURCE GPIO_PinSource7
/*-----------I2C2 Device -----------*/
#define CPAL_I2C2_SCL_GPIO_PORT GPIOB
#define CPAL_I2C2_SCL_GPIO_CLK RCC_AHBPeriph_GPIOB
#define CPAL_I2C2_SCL_GPIO_PIN GPIO_Pin_10
#define CPAL_I2C2_SCL_GPIO_PINSOURCE GPIO_PinSource10
#define CPAL_I2C2_SDA_GPIO_PORT GPIOB
#define CPAL_I2C2_SDA_GPIO_CLK RCC_AHBPeriph_GPIOB
#define CPAL_I2C2_SDA_GPIO_PIN GPIO_Pin_11
#define CPAL_I2C2_SDA_GPIO_PINSOURCE GPIO_PinSource11
/*-----------------------------------------------------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------------------------------------------------*/
/* -- Section 2 : **** Device TX and RX DMA Channels Selection ****
Description: This section allows user to choose TX and RX DMA Channels if possible (in accordance with
used product) for each device.
Each device instance (I2C1, I2C2 ..) has its specific defines: one for DMA TX Channel and
another one for DMA RX Channel.
For each device instance, you find all TX an RX DMA Channel possibilities ( Refer to Product
Reference Manual).*/
/* DMA Channel selection possibilities
|--------|---------|----------------|
| Device | Channel | DMA Channel |
|--------|---------|----------------|
| | TX | DMA1_Channel2 |
| I2C1 |---------|----------------|
| | RX | DMA1_Channel3 |
|--------|---------|----------------|
| | TX | DMA1_Channel4 |
| I2C2 |---------|----------------|
| | RX | DMA1_Channel5 |
|--------|---------|----------------|*/
/* I2Cx TX and RX DMA channels for STM32F0XX family are fixed */
/*----------- I2C1 Device -----------*/
#define CPAL_I2C1_DMA_TX_Channel DMA1_Channel2
#define CPAL_I2C1_DMA_RX_Channel DMA1_Channel3
/*----------- I2C2 Device -----------*/
#define CPAL_I2C2_DMA_TX_Channel DMA1_Channel4
#define CPAL_I2C2_DMA_RX_Channel DMA1_Channel5
/*-----------------------------------------------------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------------------------------------------------*/
/* -- Section 3 : **** I2C and DMA Interrupts Priority Selection ****
Description: This section allows user to select Interrupt Priority of I2C Event Interrupts and DMA Interrupts.
Make sure that the following rules are always respected:
- I2C event and error interrupts should be interruptible (mainly, the timeout interrupt should
be able to interrupt all device ISR)
- I2C Error interrupt priority should be higher than Event interrupt
- The timeout mechanism interrupt priority should be the highest one and it should be able to
interrupt any other ISR.
- It is advised that DMA interrupts have higher priority than the device event interrupts.*/
/*----------- I2Cx Interrupt Priority -------------*/
/*----------- I2C1 Device -----------*/
#define I2C1_IT_PRIO I2C1_IT_OFFSET_PREPRIO + 2 /* I2C1 IT PRIORITY */
#define I2C1_IT_DMA_PRIO I2C1_IT_OFFSET_PREPRIO + 0 /* I2C1 DMA PRIORITY */
/*----------- I2C2 Device -----------*/
#define I2C2_IT_PRIO I2C2_IT_OFFSET_PREPRIO + 2 /* I2C2 IT PRIORITY */
#define I2C2_IT_DMA_PRIO I2C2_IT_OFFSET_PREPRIO + 0 /* I2C2 DMA PRIORITY */
/*-----------------------------------------------------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------------------------------------------------*/
/*****END OF CPAL Hardware Configuration***************************************************************************************************/
/* !WARNING!:
---------
The following code should not be modified by user.
Any modification may cause Library dysfunction.
*/
/*========= Common Defines =========*/
/* This define set the number of I2C devices that can be used with this product family */
#define CPAL_I2C_DEV_NUM 2
/* This define is used to enable DMA Channel */
#define CPAL_DMA_CCR_EN DMA_CCR_EN
/* This define is used to check if DMA interrupt option are enabled */
#define CPAL_OPT_DMA_IT_MASK ((uint32_t)0x00003F00)
/* This define is used to check I2C errors (BERR, ARLO and OVR) */
#define CPAL_I2C_STATUS_ERR_MASK ((uint32_t)0x00000700) /*!< I2C errors Mask */
/* This define is used to check I2C events (TXIS, RXNE, ADDR, NACKF, STOPF, TC and TCR) */
#define CPAL_I2C_STATUS_EVT_MASK ((uint16_t)0x0000000FE) /*!< I2C event Mask for Status Register 1 */
/* This define is used to check if DMA TX interrupt are selected */
#define CPAL_OPT_I2C_DMA_TX_IT_MASK ((uint32_t)0x00000700)
/* This define is used to check if DMA RX interrupt are selected */
#define CPAL_OPT_I2C_DMA_RX_IT_MASK ((uint32_t)0x00003800)
/* I2C Event Defines */
#define CPAL_I2C_EVT_ADDR I2C_ISR_ADDR /*!<Address matched */
#define CPAL_I2C_EVT_STOP I2C_ISR_STOPF /*!<Stop detection */
#define CPAL_I2C_EVT_NACK I2C_ISR_NACKF /*!<NACK received */
#define CPAL_I2C_EVT_RXNE I2C_ISR_RXNE /*!<Receive Data Register not Empty */
#define CPAL_I2C_EVT_TXIS I2C_ISR_TXIS /*!<Transmit interrupt Status */
#define CPAL_I2C_EVT_TCR I2C_ISR_TCR /*!<Transfer Complete Reload */
#define CPAL_I2C_EVT_TC I2C_ISR_TC /*!<Transfer Complete */
/*========= I2C1 specific defines (GPIO, PINs, Clocks and DMA) =========*/
#define CPAL_I2C1_CLK RCC_APB1Periph_I2C1
#define CPAL_I2C1_TXDR ((uint32_t)0x40005428)
#define CPAL_I2C1_RXDR ((uint32_t)0x40005424)
#define CPAL_I2C1_AF GPIO_AF_1
#define CPAL_I2C1_DMA DMA1
#define CPAL_I2C1_DMA_CLK RCC_AHBPeriph_DMA1
#define CPAL_I2C1_IT_IRQn I2C1_IRQn
#define CPAL_I2C1_DMA_IRQn DMA1_Channel2_3_IRQn
#define CPAL_I2C1_DMA_IRQHandler DMA1_Channel2_3_IRQHandler
#define CPAL_I2C1_DMA_TX_TC_FLAG DMA1_FLAG_TC2
#define CPAL_I2C1_DMA_TX_HT_FLAG DMA1_FLAG_HT2
#define CPAL_I2C1_DMA_TX_TE_FLAG DMA1_FLAG_TE2
#define CPAL_I2C1_DMA_RX_TC_FLAG DMA1_FLAG_TC3
#define CPAL_I2C1_DMA_RX_HT_FLAG DMA1_FLAG_HT3
#define CPAL_I2C1_DMA_RX_TE_FLAG DMA1_FLAG_TE3
/*========= I2C2 specific defines (GPIO, PINs, Clocks and DMA) =========*/
#define CPAL_I2C2_CLK RCC_APB1Periph_I2C2
#define CPAL_I2C2_TXDR ((uint32_t)0x40005828)
#define CPAL_I2C2_RXDR ((uint32_t)0x40005824)
#define CPAL_I2C2_AF GPIO_AF_1
#define CPAL_I2C2_DMA DMA1
#define CPAL_I2C2_DMA_CLK RCC_AHBPeriph_DMA1
#define CPAL_I2C2_IT_IRQn I2C2_IRQn
#ifdef STM32F072
#define CPAL_I2C2_DMA_IRQn DMA1_Channel4_5_6_7_IRQn
#define CPAL_I2C2_DMA_IRQHandler DMA1_Channel4_5_6_7IRQHandler
#else
#define CPAL_I2C2_DMA_IRQn DMA1_Channel4_5_IRQn
#define CPAL_I2C2_DMA_IRQHandler DMA1_Channel4_5_IRQHandler
#endif /* STM32F072 */
#define CPAL_I2C2_DMA_TX_TC_FLAG DMA1_FLAG_TC4
#define CPAL_I2C2_DMA_TX_HT_FLAG DMA1_FLAG_HT4
#define CPAL_I2C2_DMA_TX_TE_FLAG DMA1_FLAG_TE4
#define CPAL_I2C2_DMA_RX_TC_FLAG DMA1_FLAG_TC5
#define CPAL_I2C2_DMA_RX_HT_FLAG DMA1_FLAG_HT5
#define CPAL_I2C2_DMA_RX_TE_FLAG DMA1_FLAG_TE5
/* Exported macro ------------------------------------------------------------*/
/*========= Peripheral Clock Command =========*/
#define __I2C_CLK_CMD(clk,cmd) RCC_APB1PeriphClockCmd((clk),(cmd))
#define __I2C_RCC_RESET(clk) RCC_APB1PeriphResetCmd((clk),ENABLE);\
RCC_APB1PeriphResetCmd((clk),DISABLE)
#define __I2C_GPIO_CLK_CMD(clk,cmd) RCC_AHBPeriphClockCmd((clk),(cmd))
#define __DMA_CLK_CMD(clk,cmd) RCC_AHBPeriphClockCmd((clk),(cmd))
#define __DMA_RESET_CMD(clk,cmd) RCC_AHBPeriphResetCmd((clk),(cmd))
/*========= DMA =========*/
/* DMA channels enable/disable */
#define __CPAL_I2C_HAL_ENABLE_DMATX(device) CPAL_I2C_DMA_TX_Channel[(device)]->CCR |= CPAL_DMA_CCR_EN
#define __CPAL_I2C_HAL_DISABLE_DMATX(device) CPAL_I2C_DMA_TX_Channel[(device)]->CCR &= ~CPAL_DMA_CCR_EN
#define __CPAL_I2C_HAL_ENABLE_DMARX(device) CPAL_I2C_DMA_RX_Channel[(device)]->CCR |= CPAL_DMA_CCR_EN
#define __CPAL_I2C_HAL_DISABLE_DMARX(device) CPAL_I2C_DMA_RX_Channel[(device)]->CCR &= ~CPAL_DMA_CCR_EN
/* DMA interrupts enable/disable */
#define __I2C_HAL_ENABLE_DMATX_TCIT(device) CPAL_I2C_DMA_TX_Channel[(device)]->CCR |= DMA_IT_TC
#define __I2C_HAL_ENABLE_DMATX_HTIT(device) CPAL_I2C_DMA_TX_Channel[(device)]->CCR |= DMA_IT_HT
#define __I2C_HAL_ENABLE_DMATX_TEIT(device) CPAL_I2C_DMA_TX_Channel[(device)]->CCR |= DMA_IT_TE
#define __I2C_HAL_ENABLE_DMARX_TCIT(device) CPAL_I2C_DMA_RX_Channel[(device)]->CCR |= DMA_IT_TC
#define __I2C_HAL_ENABLE_DMARX_HTIT(device) CPAL_I2C_DMA_RX_Channel[(device)]->CCR |= DMA_IT_HT
#define __I2C_HAL_ENABLE_DMARX_TEIT(device) CPAL_I2C_DMA_RX_Channel[(device)]->CCR |= DMA_IT_TE
/* DMA interrupts flag management */
#define __CPAL_I2C_HAL_GET_DMATX_IT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & (CPAL_I2C_DMA_TX_TC_FLAG[(device)] \
| CPAL_I2C_DMA_TX_HT_FLAG[(device)] | CPAL_I2C_DMA_TX_TE_FLAG[(device)]))
#define __CPAL_I2C_HAL_GET_DMATX_TCIT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & CPAL_I2C_DMA_TX_TC_FLAG [(device)])
#define __CPAL_I2C_HAL_GET_DMATX_HTIT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & CPAL_I2C_DMA_TX_HT_FLAG [(device)])
#define __CPAL_I2C_HAL_GET_DMATX_TEIT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & CPAL_I2C_DMA_TX_TE_FLAG [(device)])
#define __CPAL_I2C_HAL_GET_DMARX_IT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & (CPAL_I2C_DMA_RX_TC_FLAG[(device)] \
| CPAL_I2C_DMA_RX_HT_FLAG[(device)] | CPAL_I2C_DMA_RX_TE_FLAG[(device)]))
#define __CPAL_I2C_HAL_GET_DMARX_TCIT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & CPAL_I2C_DMA_RX_TC_FLAG [(device)])
#define __CPAL_I2C_HAL_GET_DMARX_HTIT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & CPAL_I2C_DMA_RX_HT_FLAG [(device)])
#define __CPAL_I2C_HAL_GET_DMARX_TEIT(device) (uint32_t)(CPAL_I2C_DMA[(device)]->ISR & CPAL_I2C_DMA_RX_TE_FLAG [(device)])
#define __CPAL_I2C_HAL_CLEAR_DMATX_IT(device) CPAL_I2C_DMA[(device)]->IFCR = (CPAL_I2C_DMA_TX_TC_FLAG[(device)] \
| CPAL_I2C_DMA_TX_HT_FLAG[(device)] | CPAL_I2C_DMA_TX_TE_FLAG[(device)])
#define __CPAL_I2C_HAL_CLEAR_DMARX_IT(device) CPAL_I2C_DMA[(device)]->IFCR = (CPAL_I2C_DMA_RX_TC_FLAG[(device)] \
| CPAL_I2C_DMA_RX_HT_FLAG[(device)] | CPAL_I2C_DMA_RX_TE_FLAG[(device)])
/* Get DMA data counter */
#define __CPAL_I2C_HAL_DMATX_GET_CNDT(device) (uint32_t)(CPAL_I2C_DMA_TX_Channel[(device)]->CNDTR)
#define __CPAL_I2C_HAL_DMARX_GET_CNDT(device) (uint32_t)(CPAL_I2C_DMA_RX_Channel[(device)]->CNDTR)
/*========= I2C =========*/
/* I2C enable/disable */
#define __CPAL_I2C_HAL_ENABLE_DEV(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_PE
#define __CPAL_I2C_HAL_DISABLE_DEV(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_PE
/* I2C software reset */
#define __CPAL_I2C_HAL_SWRST(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_SWRST; \
CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_SWRST
/* I2C Wakeup option */
#define __CPAL_I2C_HAL_ENABLE_WAKEUP(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_WUPEN
#define __CPAL_I2C_HAL_DISABLE_WAKEUP(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_WUPEN
/* I2C interrupts enable/disable */
#define __CPAL_I2C_HAL_DISABLE_ALLIT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~(I2C_CR1_TXIE | I2C_CR1_RXIE | I2C_CR1_ADDRIE | \
I2C_CR1_STOPIE | I2C_CR1_TCIE | I2C_CR1_ERRIE | I2C_CR1_NACKIE)
#define __CPAL_I2C_HAL_ENABLE_ERRIT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= (I2C_CR1_ERRIE | I2C_CR1_NACKIE)
#define __CPAL_I2C_HAL_DISABLE_ERRIT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~(I2C_CR1_ERRIE | I2C_CR1_NACKIE)
#define __CPAL_I2C_HAL_ENABLE_MASTER_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= (I2C_CR1_TCIE | I2C_CR1_STOPIE)
#define __CPAL_I2C_HAL_DISABLE_MASTER_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~(I2C_CR1_TCIE | I2C_CR1_STOPIE)
#define __CPAL_I2C_HAL_ENABLE_MASTER_TXIT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= (I2C_CR1_TCIE | I2C_CR1_STOPIE | I2C_CR1_TXIE)
#define __CPAL_I2C_HAL_ENABLE_MASTER_RXIT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= (I2C_CR1_TCIE | I2C_CR1_STOPIE | I2C_CR1_RXIE)
#define __CPAL_I2C_HAL_ENABLE_SLAVE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= (I2C_CR1_ADDRIE | I2C_CR1_STOPIE)
#define __CPAL_I2C_HAL_DISABLE_SLAVE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~(I2C_CR1_ADDRIE | I2C_CR1_STOPIE)
#define __CPAL_I2C_HAL_ENABLE_SLAVE_TXIT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= (I2C_CR1_ADDRIE | I2C_CR1_STOPIE | I2C_CR1_TXIE)
#define __CPAL_I2C_HAL_ENABLE_SLAVE_RXIT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= (I2C_CR1_ADDRIE | I2C_CR1_STOPIE | I2C_CR1_RXIE)
#define __CPAL_I2C_HAL_ENABLE_STOPIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_STOPIE
#define __CPAL_I2C_HAL_DISABLE_STOPIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_STOPIE
#define __CPAL_I2C_HAL_ENABLE_ADDRIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_ADDRIE
#define __CPAL_I2C_HAL_DISABLE_ADDRIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_ADDRIE
#define __CPAL_I2C_HAL_ENABLE_TCIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_TCIE
#define __CPAL_I2C_HAL_DISABLE_TCIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_TCIE
#define __CPAL_I2C_HAL_ENABLE_TXIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_TXIE
#define __CPAL_I2C_HAL_DISABLE_TXIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_TXIE
#define __CPAL_I2C_HAL_ENABLE_RXIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_RXIE
#define __CPAL_I2C_HAL_DISABLE_RXIE_IT(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_RXIE
/* I2C Addressing configuration */
#define __CPAL_I2C_HAL_SADD_CONF(device,value) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_SADD; \
CPAL_I2C_DEVICE[(device)]->CR2 |= (uint32_t)((value) & 0x000003FF)
#define __CPAL_I2C_HAL_OA2_CONF(device,value) CPAL_I2C_DEVICE[(device)]->OAR2 &= ~I2C_OAR2_OA2; \
CPAL_I2C_DEVICE[(device)]->OAR2 |= (uint32_t)((value) & 0x000000FE)
#define __CPAL_I2C_HAL_OA2_MASK_CONF(device,value) CPAL_I2C_DEVICE[(device)]->OAR2 &= ~I2C_OAR2_OA2MSK; \
CPAL_I2C_DEVICE[(device)]->OAR2 |= (uint32_t)((value) << 8)
#define __CPAL_I2C_HAL_ENABLE_OA2(device) CPAL_I2C_DEVICE[(device)]->OAR2 |= I2C_OAR2_OA2EN
#define __CPAL_I2C_HAL_ENABLE_ADD10(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_ADD10
#define __CPAL_I2C_HAL_DISABLE_ADD10(device) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_ADD10
#define __CPAL_I2C_HAL_ENABLE_COMPLETE_HEAD10R(device) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_HEAD10R
#define __CPAL_I2C_HAL_DISABLE_COMPLETE_HEAD10R(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_HEAD10R
#define __CPAL_I2C_HAL_ENABLE_GENCALL(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_GCEN
#define __CPAL_I2C_HAL_REQ_WRITE_TRANSFER(device) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_RD_WRN
#define __CPAL_I2C_HAL_REQ_READ_TRANSFER(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_RD_WRN
#define __CPAL_I2C_HAL_GET_OA1(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_OAR1_OA1)
#define __CPAL_I2C_HAL_GET_OA2(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_OAR2_OA2)
#define __CPAL_I2C_HAL_GET_OA2_MASK(device) (uint32_t)((CPAL_I2C_DEVICE[(device)]->ISR & I2C_OAR2_OA2MSK) >> 8)
#define __CPAL_I2C_HAL_GET_ADDCODE(device) (uint32_t)((CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_ADDCODE) >> 17)
#define __CPAL_I2C_HAL_GET_DIR(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_DIR)
/* I2C misc configuration */
#define __CPAL_I2C_HAL_CR2_UPDATE(device,value) CPAL_I2C_DEVICE[(device)]->CR2 = value
#define __CPAL_I2C_HAL_ENABLE_TXDMAREQ(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_TXDMAEN
#define __CPAL_I2C_HAL_DISABLE_TXDMAREQ(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_TXDMAEN
#define __CPAL_I2C_HAL_ENABLE_RXDMAREQ(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_RXDMAEN
#define __CPAL_I2C_HAL_DISABLE_RXDMAREQ(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_RXDMAEN
#define __CPAL_I2C_HAL_ENABLE_NACK(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_NACK
#define __CPAL_I2C_HAL_DISABLE_NACK(device) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_NACK
#define __CPAL_I2C_HAL_ENABLE_AUTOEND(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_AUTOEND
#define __CPAL_I2C_HAL_DISABLE_AUTOEND(device) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_AUTOEND
#define __CPAL_I2C_HAL_ENABLE_RELOAD(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_RELOAD
#define __CPAL_I2C_HAL_DISABLE_RELOAD(device) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_RELOAD
#define __CPAL_I2C_HAL_ENABLE_NOSTRETCH(device) CPAL_I2C_DEVICE[(device)]->CR1 |= I2C_CR1_NOSTRETCH
#define __CPAL_I2C_HAL_DISABLE_NOSTRETCH(device) CPAL_I2C_DEVICE[(device)]->CR1 &= ~I2C_CR1_NOSTRETCH
#define __CPAL_I2C_HAL_START(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_START
#define __CPAL_I2C_HAL_STOP(device) CPAL_I2C_DEVICE[(device)]->CR2 |= I2C_CR2_STOP
/* I2C data management */
#define __CPAL_I2C_HAL_RECEIVE(device) (uint8_t)(CPAL_I2C_DEVICE[(device)]->RXDR)
#define __CPAL_I2C_HAL_SEND(device,value) CPAL_I2C_DEVICE[(device)]->TXDR = (uint8_t)((value))
#define __CPAL_I2C_HAL_SET_NBYTES(device,value) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_NBYTES; \
CPAL_I2C_DEVICE[(device)]->CR2 |= (uint32_t)((uint32_t)(value) << 16)
#define __CPAL_I2C_HAL_GET_NBYTES(device,value) (uint32_t)((CPAL_I2C_DEVICE[(device)]->CR2 & I2C_CR2_NBYTES) >> 16)
#define __CPAL_I2C_HAL_CLEAR_NBYTES(device) CPAL_I2C_DEVICE[(device)]->CR2 &= ~I2C_CR2_NBYTES
/* I2C flags management */
#define __CPAL_I2C_HAL_GET_EVENT(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & CPAL_I2C_STATUS_EVT_MASK)
#define __CPAL_I2C_HAL_GET_ERROR(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & CPAL_I2C_STATUS_ERR_MASK)
#define __CPAL_I2C_HAL_GET_TXE(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_TXE)
#define __CPAL_I2C_HAL_GET_TXIS(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_TXIS)
#define __CPAL_I2C_HAL_GET_RXNE(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_RXNE)
#define __CPAL_I2C_HAL_GET_ADDR(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_ADDR)
#define __CPAL_I2C_HAL_GET_NACK(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_NACKF)
#define __CPAL_I2C_HAL_GET_STOP(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_STOPF)
#define __CPAL_I2C_HAL_GET_TC(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_TC)
#define __CPAL_I2C_HAL_GET_TCR(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_TCR)
#define __CPAL_I2C_HAL_GET_BERR(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_BERR)
#define __CPAL_I2C_HAL_GET_ARLO(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_ARLO)
#define __CPAL_I2C_HAL_GET_OVR(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_OVR)
#define __CPAL_I2C_HAL_GET_BUSY(device) (uint32_t)(CPAL_I2C_DEVICE[(device)]->ISR & I2C_ISR_BUSY)
#define __CPAL_I2C_HAL_CLEAR_ADDR(device) CPAL_I2C_DEVICE[(device)]->ICR = I2C_ICR_ADDRCF
#define __CPAL_I2C_HAL_CLEAR_NACK(device) CPAL_I2C_DEVICE[(device)]->ICR = I2C_ICR_NACKCF
#define __CPAL_I2C_HAL_CLEAR_STOP(device) CPAL_I2C_DEVICE[(device)]->ICR = I2C_ICR_STOPCF
#define __CPAL_I2C_HAL_CLEAR_BERR(device) CPAL_I2C_DEVICE[(device)]->ICR = I2C_ICR_BERRCF
#define __CPAL_I2C_HAL_CLEAR_ARLO(device) CPAL_I2C_DEVICE[(device)]->ICR = I2C_ICR_ARLOCF
#define __CPAL_I2C_HAL_CLEAR_OVR(device) CPAL_I2C_DEVICE[(device)]->ICR = I2C_ICR_OVRCF
/* Exported functions --------------------------------------------------------*/
/*========= I2CX IRQHandler =========*/
#ifdef CPAL_USE_I2C1
uint32_t I2C1_IRQHandler(void); /*<!I2C1 Interrupt Handler : handle Communication and errors of I2C1 Device */
#endif /* CPAL_USE_I2C1 */
#ifdef CPAL_USE_I2C2
uint32_t I2C2_IRQHandler(void); /*<!I2C1 Interrupt Handler : handle Communication and errors of I2C2 Device */
#endif /* CPAL_USE_I2C2 */
#ifdef CPAL_I2C_DMA_PROGMODEL
/*========= DMA I2CX IRQHandler =========*/
#ifdef CPAL_USE_I2C1
uint32_t CPAL_I2C1_DMA_IRQHandler(void); /*<!I2C1 DMA Interrupt Handler : handle data Transmission and reception with DMA */
#endif /* CPAL_USE_I2C1 */
#ifdef CPAL_USE_I2C2
uint32_t CPAL_I2C2_DMA_IRQHandler(void); /*<!I2C2 DMA Interrupt Handler : handle data Transmission and reception with DMA */
#endif /* CPAL_USE_I2C2 */
#endif /* CPAL_I2C_DMA_PROGMODEL */
/*========= Hardware Abstraction Layer local =========*/
void CPAL_I2C_HAL_CLKInit(CPAL_DevTypeDef Device); /*<!This function resets then enable the I2C device clock */
void CPAL_I2C_HAL_CLKDeInit(CPAL_DevTypeDef Device); /*<!This function resets then disable the I2C device clock */
void CPAL_I2C_HAL_GPIOInit(CPAL_DevTypeDef Device); /*<!This function configures the IO pins used by the I2C device */
void CPAL_I2C_HAL_GPIODeInit(CPAL_DevTypeDef Device); /*<!This function deinitialize the IO pins used by the I2C device
(configured to their default state) */
#ifdef CPAL_I2C_DMA_PROGMODEL
void CPAL_I2C_HAL_DMAInit(CPAL_DevTypeDef Device, CPAL_DirectionTypeDef Direction, uint32_t Options); /*<!This function enable the DMA clock and initialize
needed DMA Channels used by the I2C device*/
void CPAL_I2C_HAL_DMATXConfig(CPAL_DevTypeDef Device,CPAL_TransferTypeDef* TransParameter, uint32_t Options); /*<!This function configures the DMA channel specific
for TX transfer */
void CPAL_I2C_HAL_DMARXConfig(CPAL_DevTypeDef Device,CPAL_TransferTypeDef* TransParameter, uint32_t Options); /*<!This function configures the DMA channel specific
for RX transfer */
void CPAL_I2C_HAL_DMADeInit(CPAL_DevTypeDef Device, CPAL_DirectionTypeDef Direction); /*<!This function deinitialize the DMA channel used
by I2C Device (Configure them to their default
values). DMA clock is not disabled */
#endif /* CPAL_I2C_DMA_PROGMODEL */
void CPAL_I2C_HAL_ITInit(CPAL_DevTypeDef Device, uint32_t Options); /*<!This function configures NVIC and interrupts used
by I2C Device according to enabled options */
void CPAL_I2C_HAL_ITDeInit(CPAL_DevTypeDef Device, uint32_t Options); /*<!This function deinitialize NVIC and interrupts used
by I2C Device */
#ifdef __cplusplus
}
#endif
#endif /*___STM32F0XX_I2C_CPAL_HAL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|