Files
@ 41c563eb0a68
Branch filter:
Location: therm/libraries/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h
41c563eb0a68
30.0 KiB
text/plain
Remove old usb cruft
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 | /**
******************************************************************************
* @file stm32f0xx_hal_pcd.h
* @author MCD Application Team
* @version V1.1.0
* @date 03-Oct-2014
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_PCD_H
#define __STM32F0xx_HAL_PCD_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup PCD
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PCD_Exported_Types PCD Exported Types
* @{
*/
/**
* @brief PCD State structures definition
*/
typedef enum
{
PCD_READY = 0x00,
PCD_ERROR = 0x01,
PCD_BUSY = 0x02,
PCD_TIMEOUT = 0x03
} PCD_StateTypeDef;
typedef enum
{
/* double buffered endpoint direction */
PCD_EP_DBUF_OUT,
PCD_EP_DBUF_IN,
PCD_EP_DBUF_ERR,
}PCD_EP_DBUF_DIR;
/* endpoint buffer number */
typedef enum
{
PCD_EP_NOBUF,
PCD_EP_BUF0,
PCD_EP_BUF1
}PCD_EP_BUF_NUM;
/**
* @brief PCD Initialization Structure definition
*/
typedef struct
{
uint32_t dev_endpoints; /*!< Device Endpoints number.
This parameter depends on the used USB core.
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
This parameter can be any value of @ref USB_Core_Speed */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
This parameter can be any value of @ref USB_EP0_MPS */
uint32_t phy_itface; /*!< Select the used PHY interface.
This parameter can be any value of @ref USB_Core_PHY */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
This parameter can be set to ENABLE or DISABLE */
uint32_t low_power_enable; /*!< Enable or disable Low Power mode
This parameter can be set to ENABLE or DISABLE */
uint32_t lpm_enable; /*!< Enable or disable the Link Power Management .
This parameter can be set to ENABLE or DISABLE */
uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.
This parameter can be set to ENABLE or DISABLE */
}PCD_InitTypeDef;
typedef struct
{
uint8_t num; /*!< Endpoint number
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint8_t is_in; /*!< Endpoint direction
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t is_stall; /*!< Endpoint stall condition
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
This parameter can be any value of @ref USB_EP_Type */
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
uint16_t pmaaddr0; /*!< PMA Address0
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
uint16_t pmaaddr1; /*!< PMA Address1
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
uint8_t doublebuffer; /*!< Double buffer enable
This parameter can be 0 or 1 */
uint32_t maxpacket; /*!< Endpoint Max packet size
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
uint32_t xfer_len; /*!< Current transfer length */
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
}PCD_EPTypeDef;
typedef USB_TypeDef PCD_TypeDef;
/**
* @brief PCD Handle Structure definition
*/
typedef struct
{
PCD_TypeDef *Instance; /*!< Register base address */
PCD_InitTypeDef Init; /*!< PCD required parameters */
__IO uint8_t USB_Address; /*!< USB Address */
PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
HAL_LockTypeDef Lock; /*!< PCD peripheral status */
__IO PCD_StateTypeDef State; /*!< PCD communication state */
uint32_t Setup[12]; /*!< Setup packet buffer */
void *pData; /*!< Pointer to upper stack Handler */
} PCD_HandleTypeDef;
/**
* @}
*/
#include "stm32f0xx_hal_pcd_ex.h"
/* Exported constants --------------------------------------------------------*/
/** @defgroup PCD_Exported_Constants PCD Exported Constants
* @{
*/
/** @defgroup USB_Core_Speed USB Core Speed
* @{
*/
#define PCD_SPEED_HIGH 0 /* Not Supported */
#define PCD_SPEED_FULL 2
/**
* @}
*/
/** @defgroup USB_Core_PHY USB Core PHY
* @{
*/
#define PCD_PHY_EMBEDDED 2
/**
* @}
*/
/** @defgroup USB_EP0_MPS USB EP0 MPS
* @{
*/
#define DEP0CTL_MPS_64 0
#define DEP0CTL_MPS_32 1
#define DEP0CTL_MPS_16 2
#define DEP0CTL_MPS_8 3
#define PCD_EP0MPS_64 DEP0CTL_MPS_64
#define PCD_EP0MPS_32 DEP0CTL_MPS_32
#define PCD_EP0MPS_16 DEP0CTL_MPS_16
#define PCD_EP0MPS_08 DEP0CTL_MPS_8
/**
* @}
*/
/** @defgroup USB_EP_Type USB EP Type
* @{
*/
#define PCD_EP_TYPE_CTRL 0
#define PCD_EP_TYPE_ISOC 1
#define PCD_EP_TYPE_BULK 2
#define PCD_EP_TYPE_INTR 3
/**
* @}
*/
/** @defgroup USB_ENDP USB ENDP
* @{
*/
#define PCD_ENDP0 ((uint8_t)0)
#define PCD_ENDP1 ((uint8_t)1)
#define PCD_ENDP2 ((uint8_t)2)
#define PCD_ENDP3 ((uint8_t)3)
#define PCD_ENDP4 ((uint8_t)4)
#define PCD_ENDP5 ((uint8_t)5)
#define PCD_ENDP6 ((uint8_t)6)
#define PCD_ENDP7 ((uint8_t)7)
/* Endpoint Kind */
#define PCD_SNG_BUF 0
#define PCD_DBL_BUF 1
#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup PCD_Exported_Macros PCD Exported Macros
* @brief macros to handle interrupts and specific clock configurations
* @{
*/
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
/**
* @}
*/
/* Internal macros -----------------------------------------------------------*/
/** @defgroup PCD_Private_Macros PCD Private Macros
* @brief macros to handle interrupts and specific clock configurations
* @{
*/
/* SetENDPOINT */
#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue))
/* GetENDPOINT */
#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2))
/**
* @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wType: Endpoint Type.
* @retval None
*/
#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) )))
/**
* @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval Endpoint Type
*/
#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
/**
* @brief free buffer used from the application realizing it to the line
toggles bit SW_BUF in the double buffered endpoint register
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param bDir: Direction
* @retval None
*/
#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
{\
if ((bDir) == PCD_EP_DBUF_OUT)\
{ /* OUT double buffered endpoint */\
PCD_TX_DTOG((USBx), (bEpNum));\
}\
else if ((bDir) == PCD_EP_DBUF_IN)\
{ /* IN double buffered endpoint */\
PCD_RX_DTOG((USBx), (bEpNum));\
}\
}
/**
* @brief gets direction of the double buffered endpoint
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval EP_DBUF_OUT, EP_DBUF_IN,
* EP_DBUF_ERR if the endpoint counter not yet programmed.
*/
#define PCD_GET_DB_DIR(USBx, bEpNum)\
{\
if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\
return(PCD_EP_DBUF_OUT);\
else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\
return(PCD_EP_DBUF_IN);\
else\
return(PCD_EP_DBUF_ERR);\
}
/**
* @brief sets the status for tx transfer (bits STAT_TX[1:0]).
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wState: new state
* @retval None
*/
#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) {\
register uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\
/* toggle first bit ? */ \
if((USB_EPTX_DTOG1 & (wState))!= 0) \
_wRegVal ^= USB_EPTX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPTX_DTOG2 & (wState))!= 0) \
_wRegVal ^= USB_EPTX_DTOG2; \
PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
} /* PCD_SET_EP_TX_STATUS */
/**
* @brief sets the status for rx transfer (bits STAT_TX[1:0])
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wState: new state
* @retval None
*/
#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
register uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\
/* toggle first bit ? */ \
if((USB_EPRX_DTOG1 & (wState))!= 0) \
_wRegVal ^= USB_EPRX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPRX_DTOG2 & (wState))!= 0) \
_wRegVal ^= USB_EPRX_DTOG2; \
PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
} /* PCD_SET_EP_RX_STATUS */
/**
* @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wStaterx: new state.
* @param wStatetx: new state.
* @retval None
*/
#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
register uint32_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
/* toggle first bit ? */ \
if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \
_wRegVal ^= USB_EPRX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \
_wRegVal ^= USB_EPRX_DTOG2; \
/* toggle first bit ? */ \
if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \
_wRegVal ^= USB_EPTX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \
_wRegVal ^= USB_EPTX_DTOG2; \
PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
} /* PCD_SET_EP_TXRX_STATUS */
/**
* @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
* /STAT_RX[1:0])
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval status
*/
#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
/**
* @brief sets directly the VALID tx/rx-status into the endpoint register
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
/**
* @brief checks stall condition in an endpoint.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval TRUE = endpoint in stall condition.
*/
#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
== USB_EP_TX_STALL)
#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
== USB_EP_RX_STALL)
/**
* @brief set & clear EP_KIND bit.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
(USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK))))
#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
(USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK))))
/**
* @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
/**
* @brief Sets/clears directly EP_KIND bit in the endpoint register.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
/**
* @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK))
#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK))
/**
* @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
/**
* @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\
PCD_RX_DTOG((USBx), (bEpNum))
#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\
PCD_TX_DTOG((USBx), (bEpNum))
/**
* @brief Sets address in an endpoint register.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param bAddr: Address.
* @retval None
*/
#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr))
/**
* @brief Gets address in an endpoint register.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400)))
#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400)))
#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400)))
#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400)))
/**
* @brief sets address of the tx/rx buffer.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wAddr: address to be set (must be word aligned).
* @retval None
*/
#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
/**
* @brief Gets address of the tx/rx buffer.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval address of the buffer.
*/
#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
/**
* @brief Sets counter of rx buffer with no. of blocks.
* @param dwReg: Register
* @param wCount: Counter.
* @param wNBlocks: no. of Blocks.
* @retval None
*/
#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
(wNBlocks) = (wCount) >> 5;\
if(((wCount) & 0x1f) == 0)\
(wNBlocks)--;\
*pdwReg = (uint16_t)(((wNBlocks) << 10) | 0x8000);\
}/* PCD_CALC_BLK32 */
#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
(wNBlocks) = (wCount) >> 1;\
if(((wCount) & 0x1) != 0)\
(wNBlocks)++;\
*pdwReg = (uint16_t)((wNBlocks) << 10);\
}/* PCD_CALC_BLK2 */
#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
uint16_t wNBlocks;\
if((wCount) > 62){PCD_CALC_BLK32((dwReg),(wCount),wNBlocks);}\
else {PCD_CALC_BLK2((dwReg),(wCount),wNBlocks);}\
}/* PCD_SET_EP_CNT_RX_REG */
#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
uint16_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
}
/**
* @brief sets counter for the tx/rx buffer.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wCount: Counter value.
* @retval None
*/
#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
}
/**
* @brief gets counter of the tx buffer.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval Counter value
*/
#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff)
#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff)
/**
* @brief Sets buffer 0/1 address in a double buffer endpoint.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wBuf0Addr: buffer 0 address.
* @retval Counter value
*/
#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));}
#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));}
/**
* @brief Sets addresses in a double buffer endpoint.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param wBuf0Addr: buffer 0 address.
* @param wBuf1Addr = buffer 1 address.
* @retval None
*/
#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
} /* PCD_SET_EP_DBUF_ADDR */
/**
* @brief Gets buffer 0/1 address of a double buffer endpoint.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
/**
* @brief Gets buffer 0/1 address of a double buffer endpoint.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @param bDir: endpoint dir EP_DBUF_OUT = OUT
* EP_DBUF_IN = IN
* @param wCount: Counter value
* @retval None
*/
#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
if((bDir) == PCD_EP_DBUF_OUT)\
/* OUT endpoint */ \
{PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \
else if((bDir) == PCD_EP_DBUF_IN)\
/* IN endpoint */ \
*PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
} /* SetEPDblBuf0Count*/
#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
if((bDir) == PCD_EP_DBUF_OUT)\
/* OUT endpoint */ \
{PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount));}\
else if((bDir) == PCD_EP_DBUF_IN)\
/* IN endpoint */\
*PCD_EP_RX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
} /* SetEPDblBuf1Count */
#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
} /* PCD_SET_EP_DBUF_CNT */
/**
* @brief Gets buffer 0/1 rx/tx counter for double buffering.
* @param USBx: USB peripheral instance register address.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PCD_Exported_Functions
* @{
*/
/** @addtogroup PCD_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions **********************************/
HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/** @addtogroup PCD_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
/* Non Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/** @addtogroup PCD_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/** @addtogroup PCD_Exported_Functions_Group4
* @{
*/
/* Peripheral State functions **************************************************/
PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F042x6 || STM32F072xB || STM32F078xx */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_PCD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|