Files
@ 555930ccae9f
Branch filter:
Location: therm/libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dbgmcu.c
555930ccae9f
7.3 KiB
text/plain
Change some names to F0, need to fix IT and standard stuff like sys init
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 | /**
******************************************************************************
* @file stm32f0xx_dbgmcu.c
* @author MCD Application Team
* @version V1.4.0
* @date 24-July-2014
* @brief This file provides firmware functions to manage the following
* functionalities of the Debug MCU (DBGMCU) peripheral:
* + Device and Revision ID management
* + Peripherals Configuration
* @verbatim
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_dbgmcu.h"
/** @addtogroup STM32F0xx_StdPeriph_Driver
* @{
*/
/** @defgroup DBGMCU
* @brief DBGMCU driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DBGMCU_Private_Functions
* @{
*/
/** @defgroup DBGMCU_Group1 Device and Revision ID management functions
* @brief Device and Revision ID management functions
*
@verbatim
==============================================================================
##### Device and Revision ID management functions #####
==============================================================================
@endverbatim
* @{
*/
/**
* @brief Returns the device revision identifier.
* @param None
* @retval Device revision identifier
*/
uint32_t DBGMCU_GetREVID(void)
{
return(DBGMCU->IDCODE >> 16);
}
/**
* @brief Returns the device identifier.
* @param None
* @retval Device identifier
*/
uint32_t DBGMCU_GetDEVID(void)
{
return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
}
/**
* @}
*/
/** @defgroup DBGMCU_Group2 Peripherals Configuration functions
* @brief Peripherals Configuration
*
@verbatim
==============================================================================
##### Peripherals Configuration functions #####
==============================================================================
@endverbatim
* @{
*/
/**
* @brief Configures low power mode behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the low power mode.
* This parameter can be any combination of the following values:
* @arg DBGMCU_STOP: Keep debugger connection during STOP mode
* @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
* @param NewState: new state of the specified low power mode in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->CR |= DBGMCU_Periph;
}
else
{
DBGMCU->CR &= ~DBGMCU_Periph;
}
}
/**
* @brief Configures APB1 peripheral behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the APB1 peripheral.
* This parameter can be any combination of the following values:
* @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted,
* not applicable for STM32F030 devices
* @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
* @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
* @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted,
* applicable only for STM32F072 devices
* @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
* @arg DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped
* when Core is halted.
* @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
* @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
* @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped
* when Core is halted
* @arg DBGMCU_CAN1_STOP: Debug CAN1 stopped when Core is halted,
* applicable only for STM32F042 and STM32F072 devices
* @param NewState: new state of the specified APB1 peripheral in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->APB1FZ |= DBGMCU_Periph;
}
else
{
DBGMCU->APB1FZ &= ~DBGMCU_Periph;
}
}
/**
* @brief Configures APB2 peripheral behavior when the MCU is in Debug mode.
* @param DBGMCU_Periph: specifies the APB2 peripheral.
* This parameter can be any combination of the following values:
* @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
* @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
* @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
* @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
* @param NewState: new state of the specified APB2 peripheral in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->APB2FZ |= DBGMCU_Periph;
}
else
{
DBGMCU->APB2FZ &= ~DBGMCU_Periph;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|