Files
@ 68a022485d9b
Branch filter:
Location: therm/libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_gpio.h
68a022485d9b
15.7 KiB
text/plain
Implement windup guard
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 | /**
******************************************************************************
* @file stm32l1xx_gpio.h
* @author MCD Application Team
* @version V1.2.0
* @date 22-February-2013
* @brief This file contains all the functions prototypes for the GPIO
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L1xx_GPIO_H
#define __STM32L1xx_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l1xx.h"
/** @addtogroup STM32L1xx_StdPeriph_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
((PERIPH) == GPIOB) || \
((PERIPH) == GPIOC) || \
((PERIPH) == GPIOD) || \
((PERIPH) == GPIOE) || \
((PERIPH) == GPIOH) || \
((PERIPH) == GPIOF) || \
((PERIPH) == GPIOG))
/** @defgroup Configuration_Mode_enumeration
* @{
*/
typedef enum
{
GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */
GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */
}GPIOMode_TypeDef;
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \
((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
/**
* @}
*/
/** @defgroup Output_type_enumeration
* @{
*/
typedef enum
{ GPIO_OType_PP = 0x00,
GPIO_OType_OD = 0x01
}GPIOOType_TypeDef;
#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
/**
* @}
*/
/** @defgroup Output_Maximum_frequency_enumeration
* @{
*/
typedef enum
{
GPIO_Speed_400KHz = 0x00, /*!< Very Low Speed */
GPIO_Speed_2MHz = 0x01, /*!< Low Speed */
GPIO_Speed_10MHz = 0x02, /*!< Medium Speed */
GPIO_Speed_40MHz = 0x03 /*!< High Speed */
}GPIOSpeed_TypeDef;
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_400KHz) || ((SPEED) == GPIO_Speed_2MHz) || \
((SPEED) == GPIO_Speed_10MHz)|| ((SPEED) == GPIO_Speed_40MHz))
/**
* @}
*/
/** @defgroup Configuration_Pull-Up_Pull-Down_enumeration
* @{
*/
typedef enum
{ GPIO_PuPd_NOPULL = 0x00,
GPIO_PuPd_UP = 0x01,
GPIO_PuPd_DOWN = 0x02
}GPIOPuPd_TypeDef;
#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
((PUPD) == GPIO_PuPd_DOWN))
/**
* @}
*/
/** @defgroup Bit_SET_and_Bit_RESET_enumeration
* @{
*/
typedef enum
{ Bit_RESET = 0,
Bit_SET
}BitAction;
#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
/**
* @}
*/
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIOMode_TypeDef */
GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIOSpeed_TypeDef */
GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins.
This parameter can be a value of @ref GPIOOType_TypeDef */
GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
This parameter can be a value of @ref GPIOPuPd_TypeDef */
}GPIO_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants
* @{
*/
/** @defgroup GPIO_pins_define
* @{
*/
#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */
#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00)
#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
((PIN) == GPIO_Pin_1) || \
((PIN) == GPIO_Pin_2) || \
((PIN) == GPIO_Pin_3) || \
((PIN) == GPIO_Pin_4) || \
((PIN) == GPIO_Pin_5) || \
((PIN) == GPIO_Pin_6) || \
((PIN) == GPIO_Pin_7) || \
((PIN) == GPIO_Pin_8) || \
((PIN) == GPIO_Pin_9) || \
((PIN) == GPIO_Pin_10) || \
((PIN) == GPIO_Pin_11) || \
((PIN) == GPIO_Pin_12) || \
((PIN) == GPIO_Pin_13) || \
((PIN) == GPIO_Pin_14) || \
((PIN) == GPIO_Pin_15))
/**
* @}
*/
/** @defgroup GPIO_Pin_sources
* @{
*/
#define GPIO_PinSource0 ((uint8_t)0x00)
#define GPIO_PinSource1 ((uint8_t)0x01)
#define GPIO_PinSource2 ((uint8_t)0x02)
#define GPIO_PinSource3 ((uint8_t)0x03)
#define GPIO_PinSource4 ((uint8_t)0x04)
#define GPIO_PinSource5 ((uint8_t)0x05)
#define GPIO_PinSource6 ((uint8_t)0x06)
#define GPIO_PinSource7 ((uint8_t)0x07)
#define GPIO_PinSource8 ((uint8_t)0x08)
#define GPIO_PinSource9 ((uint8_t)0x09)
#define GPIO_PinSource10 ((uint8_t)0x0A)
#define GPIO_PinSource11 ((uint8_t)0x0B)
#define GPIO_PinSource12 ((uint8_t)0x0C)
#define GPIO_PinSource13 ((uint8_t)0x0D)
#define GPIO_PinSource14 ((uint8_t)0x0E)
#define GPIO_PinSource15 ((uint8_t)0x0F)
#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
((PINSOURCE) == GPIO_PinSource1) || \
((PINSOURCE) == GPIO_PinSource2) || \
((PINSOURCE) == GPIO_PinSource3) || \
((PINSOURCE) == GPIO_PinSource4) || \
((PINSOURCE) == GPIO_PinSource5) || \
((PINSOURCE) == GPIO_PinSource6) || \
((PINSOURCE) == GPIO_PinSource7) || \
((PINSOURCE) == GPIO_PinSource8) || \
((PINSOURCE) == GPIO_PinSource9) || \
((PINSOURCE) == GPIO_PinSource10) || \
((PINSOURCE) == GPIO_PinSource11) || \
((PINSOURCE) == GPIO_PinSource12) || \
((PINSOURCE) == GPIO_PinSource13) || \
((PINSOURCE) == GPIO_PinSource14) || \
((PINSOURCE) == GPIO_PinSource15))
/**
* @}
*/
/** @defgroup GPIO_Alternat_function_selection_define
* @{
*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /*!< RTC 50/60 Hz Alternate Function mapping */
#define GPIO_AF_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */
#define GPIO_AF_RTC_AF1 ((uint8_t)0x00) /*!< RTC_AF1 Alternate Function mapping */
#define GPIO_AF_WKUP ((uint8_t)0x00) /*!< Wakeup (WKUP1, WKUP2 and WKUP3) Alternate Function mapping */
#define GPIO_AF_SWJ ((uint8_t)0x00) /*!< SWJ (SW and JTAG) Alternate Function mapping */
#define GPIO_AF_TRACE ((uint8_t)0x00) /*!< TRACE Alternate Function mapping */
/**
* @brief AF 1 selection
*/
#define GPIO_AF_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF_TIM3 ((uint8_t)0x02) /*!< TIM3 Alternate Function mapping */
#define GPIO_AF_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */
#define GPIO_AF_TIM5 ((uint8_t)0x02) /*!< TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF_TIM9 ((uint8_t)0x03) /*!< TIM9 Alternate Function mapping */
#define GPIO_AF_TIM10 ((uint8_t)0x03) /*!< TIM10 Alternate Function mapping */
#define GPIO_AF_TIM11 ((uint8_t)0x03) /*!< TIM11 Alternate Function mapping */
/**
* @brief AF 4 selection
*/
#define GPIO_AF_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */
#define GPIO_AF_I2C2 ((uint8_t)0x04) /*!< I2C2 Alternate Function mapping */
/**
* @brief AF 5 selection
*/
#define GPIO_AF_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */
#define GPIO_AF_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF_SPI3 ((uint8_t)0x06) /*!< SPI3 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */
#define GPIO_AF_USART2 ((uint8_t)0x07) /*!< USART2 Alternate Function mapping */
#define GPIO_AF_USART3 ((uint8_t)0x07) /*!< USART3 Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF_UART4 ((uint8_t)0x08) /*!< UART4 Alternate Function mapping */
#define GPIO_AF_UART5 ((uint8_t)0x08) /*!< UART5 Alternate Function mapping */
/**
* @brief AF 10 selection
*/
#define GPIO_AF_USB ((uint8_t)0xA) /*!< USB Full speed device Alternate Function mapping */
/**
* @brief AF 11 selection
*/
#define GPIO_AF_LCD ((uint8_t)0x0B) /*!< LCD Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#define GPIO_AF_FSMC ((uint8_t)0x0C) /*!< FSMC Alternate Function mapping */
#define GPIO_AF_SDIO ((uint8_t)0x0C) /*!< SDIO Alternate Function mapping */
/**
* @brief AF 14 selection
*/
#define GPIO_AF_RI ((uint8_t)0x0E) /*!< RI Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_MCO) || \
((AF) == GPIO_AF_RTC_AF1) || ((AF) == GPIO_AF_WKUP) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM2) || ((AF)== GPIO_AF_TIM3) || \
((AF) == GPIO_AF_TIM4) || ((AF)== GPIO_AF_TIM9) || \
((AF) == GPIO_AF_TIM10) || ((AF)== GPIO_AF_TIM11) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_SPI1) || ((AF) == GPIO_AF_SPI2) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_USB) || \
((AF) == GPIO_AF_LCD) || ((AF) == GPIO_AF_RI) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_SPI3) || \
((AF) == GPIO_AF_UART4) || ((AF) == GPIO_AF_UART5) || \
((AF) == GPIO_AF_FSMC) || ((AF) == GPIO_AF_SDIO) || \
((AF) == GPIO_AF_EVENTOUT))
/**
* @}
*/
/** @defgroup GPIO_Legacy
* @{
*/
#define GPIO_Mode_AIN GPIO_Mode_AN
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the GPIO configuration to the default reset state ****/
void GPIO_DeInit(GPIO_TypeDef* GPIOx);
/* Initialization and Configuration functions *********************************/
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Read and Write functions **********************************************/
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Alternate functions configuration functions ***************************/
void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
#ifdef __cplusplus
}
#endif
#endif /*__STM32L1xx_GPIO_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|