Files
@ 8efa67e4e6a3
Branch filter:
Location: therm/drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h
8efa67e4e6a3
21.1 KiB
text/plain
Comment out unused portion of font table
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 | /**
******************************************************************************
* @file stm32f0xx_hal_comp.h
* @author MCD Application Team
* @version V1.1.0
* @date 03-Oct-2014
* @brief Header file of COMP HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_COMP_H
#define __STM32F0xx_HAL_COMP_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup COMP COMP HAL Module Driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup COMP_Exported_Types COMP Exported Types
* @{
*/
/**
* @brief COMP Init structure definition
*/
typedef struct
{
uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
This parameter can be a value of @ref COMP_InvertingInput */
uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
This parameter can be a value of @ref COMP_NonInvertingInput */
uint32_t Output; /*!< Selects the output redirection of the comparator.
This parameter can be a value of @ref COMP_Output */
uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
This parameter can be a value of @ref COMP_OutputPolarity */
uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
This parameter can be a value of @ref COMP_Hysteresis */
uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
to adjust the speed/consumption.
This parameter can be a value of @ref COMP_Mode */
uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2.
This parameter can be a value of @ref COMP_WindowMode */
uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
This parameter can be a value of @ref COMP_TriggerMode */
}COMP_InitTypeDef;
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */
HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */
HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */
HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */
HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */
}HAL_COMP_StateTypeDef;
/**
* @brief COMP Handle Structure definition
*/
typedef struct
{
COMP_TypeDef *Instance; /*!< Register base address */
COMP_InitTypeDef Init; /*!< COMP required parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
}COMP_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup COMP_Exported_Constants COMP Exported Constants
* @{
*/
/** @defgroup COMP_OutputPolarity COMP OutputPolarity
* @{
*/
#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */
#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
((POL) == COMP_OUTPUTPOL_INVERTED))
/**
* @}
*/
/** @defgroup COMP_Hysteresis COMP Hysteresis
* @{
*/
#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
#define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */
#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */
#define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */
#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
/**
* @}
*/
/** @defgroup COMP_Mode COMP Mode
* @{
*/
/* Please refer to the electrical characteristics in the device datasheet for
the power consumption values */
#define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */
#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */
#define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */
#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */
#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
((MODE) == COMP_MODE_MEDIUMSPEED) || \
((MODE) == COMP_MODE_LOWPOWER) || \
((MODE) == COMP_MODE_ULTRALOWPOWER))
/**
* @}
*/
/** @defgroup COMP_InvertingInput COMP InvertingInput
* @{
*/
#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input
and close switch (PA0 for COMP1 only) */
#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */
#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */
#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1) || \
((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \
((INPUT) == COMP_INVERTINGINPUT_DAC2) || \
((INPUT) == COMP_INVERTINGINPUT_IO1))
/**
* @}
*/
/** @defgroup COMP_NonInvertingInput COMP NonInvertingInput
* @{
*/
#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
connected to comparator non inverting input */
#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
/**
* @}
*/
/** @defgroup COMP_Output COMP Output
* @{
*/
/* Output Redirection common for COMP1 and COMP2 */
#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */
#define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))
/**
* @}
*/
/** @defgroup COMP_OutputLevel COMP OutputLevel
* @{
*/
/* When output polarity is not inverted, comparator output is low when
the non-inverting input is at a lower voltage than the inverting input*/
#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000)
/* When output polarity is not inverted, comparator output is high when
the non-inverting input is at a higher voltage than the inverting input */
#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT
/**
* @}
*/
/** @defgroup COMP_TriggerMode COMP TriggerMode
* @{
*/
#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */
#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \
((MODE) == COMP_TRIGGERMODE_IT_RISING) || \
((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \
((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING))
/**
* @}
*/
/** @defgroup COMP_WindowMode COMP WindowMode
* @{
*/
#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
#define COMP_WINDOWMODE_ENABLED COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2
is connected to the non inverting input of comparator 1 (PA1) */
#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
/**
* @}
*/
/** @defgroup COMP_ExtiLineEvent COMP ExtiLineEvent
* Elements values convention: XXXX0000
* - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
* @{
*/
#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
/**
* @}
*/
/** @defgroup COMP_Lock COMP Lock
* @{
*/
#define COMP_LOCK_DISABLE ((uint32_t)0x00000000)
#define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK
#define COMP_STATE_BIT_LOCK ((uint32_t)0x10)
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup COMP_Exported_Macros COMP Exported Macros
* @{
*/
/** @brief Reset COMP handle state
* @param __HANDLE__: COMP handle.
* @retval None
*/
#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param __FLAG__: specifies the COMP Exti sources to be checked.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval The state of __FLAG__ (SET or RESET).
*/
#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__))
/**
* @brief Clear the COMP Exti flags.
* @param __FLAG__: specifies the COMP Exti sources to be cleared.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
/**
* @brief Enable the COMP Exti Line.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
/**
* @brief Disable the COMP Exti Line.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
/**
* @brief Enable the Exti Line rising edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__))
/**
* @brief Disable the Exti Line rising edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__))
/**
* @brief Enable the Exti Line falling edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__))
/**
* @brief Disable the Exti Line falling edge trigger.
* @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
* This parameter can be a value of @ref COMP_ExtiLineEvent
* @retval None.
*/
#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__))
/**
* @brief Get the specified EXTI line for a comparator instance
* @param __INSTANCE__: specifies the COMP instance.
* @retval value of @ref COMP_ExtiLineEvent
*/
#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
COMP_EXTI_LINE_COMP2_EVENT)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup COMP_Exported_Functions COMP Exported Functions
* @{
*/
/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions
* @brief Initialization and Configuration functions
* @{
*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
/**
* @}
*/
/** @addtogroup COMP_Exported_Functions_Group2 I/O operation functions
* @brief Data transfers functions
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
/**
* @}
*/
/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions
* @brief management functions
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
/* Callback in Interrupt mode */
void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
/**
* @}
*/
/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions
* @brief Peripheral State functions
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F051x8 || STM32F058xx || */
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_COMP_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|