Files
@ 8f02a0213d08
Branch filter:
Location: therm/libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_usart.h
8f02a0213d08
26.4 KiB
text/plain
Added gpio, spi, and clock init. May need to swap stdperiph to the one thrown out by the cube
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 | /**
******************************************************************************
* @file stm32f0xx_usart.h
* @author MCD Application Team
* @version V1.4.0
* @date 24-July-2014
* @brief This file contains all the functions prototypes for the USART
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_USART_H
#define __STM32F0XX_USART_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_StdPeriph_Driver
* @{
*/
/** @addtogroup USART
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief USART Init Structure definition
*/
typedef struct
{
uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
The baud rate is computed using the following formula:
- IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
uint32_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref USART_Word_Length */
uint32_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref USART_Stop_Bits */
uint32_t USART_Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref USART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
uint32_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref USART_Mode */
uint32_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
or disabled.
This parameter can be a value of @ref USART_Hardware_Flow_Control*/
} USART_InitTypeDef;
/**
* @brief USART Clock Init Structure definition
*/
typedef struct
{
uint32_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
This parameter can be a value of @ref USART_Clock */
uint32_t USART_CPOL; /*!< Specifies the steady state of the serial clock.
This parameter can be a value of @ref USART_Clock_Polarity */
uint32_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref USART_Clock_Phase */
uint32_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref USART_Last_Bit */
} USART_ClockInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup USART_Exported_Constants
* @{
*/
#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3) || \
((PERIPH) == USART4) || \
((PERIPH) == USART5) || \
((PERIPH) == USART6) || \
((PERIPH) == USART7) || \
((PERIPH) == USART8))
#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3))
/** @defgroup USART_Word_Length
* @{
*/
#define USART_WordLength_8b ((uint32_t)0x00000000)
#define USART_WordLength_9b USART_CR1_M /* should be ((uint32_t)0x00001000) */
#define USART_WordLength_7b ((uint32_t)0x10001000) /*!< only available for STM32F072 and STM32F030 devices */
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
((LENGTH) == USART_WordLength_9b) || \
((LENGTH) == USART_WordLength_7b))
/**
* @}
*/
/** @defgroup USART_Stop_Bits
* @{
*/
#define USART_StopBits_1 ((uint32_t)0x00000000)
#define USART_StopBits_2 USART_CR2_STOP_1
#define USART_StopBits_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1)
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
((STOPBITS) == USART_StopBits_2) || \
((STOPBITS) == USART_StopBits_1_5))
/**
* @}
*/
/** @defgroup USART_Parity
* @{
*/
#define USART_Parity_No ((uint32_t)0x00000000)
#define USART_Parity_Even USART_CR1_PCE
#define USART_Parity_Odd (USART_CR1_PCE | USART_CR1_PS)
#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
((PARITY) == USART_Parity_Even) || \
((PARITY) == USART_Parity_Odd))
/**
* @}
*/
/** @defgroup USART_Mode
* @{
*/
#define USART_Mode_Rx USART_CR1_RE
#define USART_Mode_Tx USART_CR1_TE
#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && \
((MODE) != (uint32_t)0x00))
/**
* @}
*/
/** @defgroup USART_Hardware_Flow_Control
* @{
*/
#define USART_HardwareFlowControl_None ((uint32_t)0x00000000)
#define USART_HardwareFlowControl_RTS USART_CR3_RTSE
#define USART_HardwareFlowControl_CTS USART_CR3_CTSE
#define USART_HardwareFlowControl_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE)
#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
(((CONTROL) == USART_HardwareFlowControl_None) || \
((CONTROL) == USART_HardwareFlowControl_RTS) || \
((CONTROL) == USART_HardwareFlowControl_CTS) || \
((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
/**
* @}
*/
/** @defgroup USART_Clock
* @{
*/
#define USART_Clock_Disable ((uint32_t)0x00000000)
#define USART_Clock_Enable USART_CR2_CLKEN
#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
((CLOCK) == USART_Clock_Enable))
/**
* @}
*/
/** @defgroup USART_Clock_Polarity
* @{
*/
#define USART_CPOL_Low ((uint32_t)0x00000000)
#define USART_CPOL_High USART_CR2_CPOL
#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
/**
* @}
*/
/** @defgroup USART_Clock_Phase
* @{
*/
#define USART_CPHA_1Edge ((uint32_t)0x00000000)
#define USART_CPHA_2Edge USART_CR2_CPHA
#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
/**
* @}
*/
/** @defgroup USART_Last_Bit
* @{
*/
#define USART_LastBit_Disable ((uint32_t)0x00000000)
#define USART_LastBit_Enable USART_CR2_LBCL
#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
((LASTBIT) == USART_LastBit_Enable))
/**
* @}
*/
/** @defgroup USART_DMA_Requests
* @{
*/
#define USART_DMAReq_Tx USART_CR3_DMAT
#define USART_DMAReq_Rx USART_CR3_DMAR
#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint32_t)0xFFFFFF3F) == 0x00) && \
((DMAREQ) != (uint32_t)0x00))
/**
* @}
*/
/** @defgroup USART_DMA_Recception_Error
* @{
*/
#define USART_DMAOnError_Enable ((uint32_t)0x00000000)
#define USART_DMAOnError_Disable USART_CR3_DDRE
#define IS_USART_DMAONERROR(DMAERROR) (((DMAERROR) == USART_DMAOnError_Disable)|| \
((DMAERROR) == USART_DMAOnError_Enable))
/**
* @}
*/
/** @defgroup USART_MuteMode_WakeUp_methods
* @{
*/
#define USART_WakeUp_IdleLine ((uint32_t)0x00000000)
#define USART_WakeUp_AddressMark USART_CR1_WAKE
#define IS_USART_MUTEMODE_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
((WAKEUP) == USART_WakeUp_AddressMark))
/**
* @}
*/
/** @defgroup USART_Address_Detection
* @{
*/
#define USART_AddressLength_4b ((uint32_t)0x00000000)
#define USART_AddressLength_7b USART_CR2_ADDM7
#define IS_USART_ADDRESS_DETECTION(ADDRESS) (((ADDRESS) == USART_AddressLength_4b) || \
((ADDRESS) == USART_AddressLength_7b))
/**
* @}
*/
/** @defgroup USART_StopMode_WakeUp_methods
* @note These parameters are only available for STM32F051 and STM32F072 devices
* @{
*/
#define USART_WakeUpSource_AddressMatch ((uint32_t)0x00000000)
#define USART_WakeUpSource_StartBit USART_CR3_WUS_1
#define USART_WakeUpSource_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1)
#define IS_USART_STOPMODE_WAKEUPSOURCE(SOURCE) (((SOURCE) == USART_WakeUpSource_AddressMatch) || \
((SOURCE) == USART_WakeUpSource_StartBit) || \
((SOURCE) == USART_WakeUpSource_RXNE))
/**
* @}
*/
/** @defgroup USART_LIN_Break_Detection_Length
* @{
*/
#define USART_LINBreakDetectLength_10b ((uint32_t)0x00000000)
#define USART_LINBreakDetectLength_11b USART_CR2_LBDL
#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
(((LENGTH) == USART_LINBreakDetectLength_10b) || \
((LENGTH) == USART_LINBreakDetectLength_11b))
/**
* @}
*/
/** @defgroup USART_IrDA_Low_Power
* @{
*/
#define USART_IrDAMode_LowPower USART_CR3_IRLP
#define USART_IrDAMode_Normal ((uint32_t)0x00000000)
#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
((MODE) == USART_IrDAMode_Normal))
/**
* @}
*/
/** @defgroup USART_DE_Polarity
* @{
*/
#define USART_DEPolarity_High ((uint32_t)0x00000000)
#define USART_DEPolarity_Low USART_CR3_DEP
#define IS_USART_DE_POLARITY(POLARITY) (((POLARITY) == USART_DEPolarity_Low) || \
((POLARITY) == USART_DEPolarity_High))
/**
* @}
*/
/** @defgroup USART_Inversion_Pins
* @{
*/
#define USART_InvPin_Tx USART_CR2_TXINV
#define USART_InvPin_Rx USART_CR2_RXINV
#define IS_USART_INVERSTION_PIN(PIN) ((((PIN) & (uint32_t)0xFFFCFFFF) == 0x00) && \
((PIN) != (uint32_t)0x00))
/**
* @}
*/
/** @defgroup USART_AutoBaudRate_Mode
* @{
*/
#define USART_AutoBaudRate_StartBit ((uint32_t)0x00000000)
#define USART_AutoBaudRate_FallingEdge USART_CR2_ABRMODE_0
#define IS_USART_AUTOBAUDRATE_MODE(MODE) (((MODE) == USART_AutoBaudRate_StartBit) || \
((MODE) == USART_AutoBaudRate_FallingEdge))
/**
* @}
*/
/** @defgroup USART_OVR_DETECTION
* @{
*/
#define USART_OVRDetection_Enable ((uint32_t)0x00000000)
#define USART_OVRDetection_Disable USART_CR3_OVRDIS
#define IS_USART_OVRDETECTION(OVR) (((OVR) == USART_OVRDetection_Enable)|| \
((OVR) == USART_OVRDetection_Disable))
/**
* @}
*/
/** @defgroup USART_Request
* @{
*/
#define USART_Request_ABRRQ USART_RQR_ABRRQ
#define USART_Request_SBKRQ USART_RQR_SBKRQ
#define USART_Request_MMRQ USART_RQR_MMRQ
#define USART_Request_RXFRQ USART_RQR_RXFRQ
#define USART_Request_TXFRQ USART_RQR_TXFRQ
#define IS_USART_REQUEST(REQUEST) (((REQUEST) == USART_Request_TXFRQ) || \
((REQUEST) == USART_Request_RXFRQ) || \
((REQUEST) == USART_Request_MMRQ) || \
((REQUEST) == USART_Request_SBKRQ) || \
((REQUEST) == USART_Request_ABRRQ))
/**
* @}
*/
/** @defgroup USART_Flags
* @{
*/
#define USART_FLAG_REACK USART_ISR_REACK
#define USART_FLAG_TEACK USART_ISR_TEACK
#define USART_FLAG_WU USART_ISR_WUF /*!< Not available for STM32F030 devices */
#define USART_FLAG_RWU USART_ISR_RWU /*!< Not available for STM32F030 devices */
#define USART_FLAG_SBK USART_ISR_SBKF
#define USART_FLAG_CM USART_ISR_CMF
#define USART_FLAG_BUSY USART_ISR_BUSY
#define USART_FLAG_ABRF USART_ISR_ABRF
#define USART_FLAG_ABRE USART_ISR_ABRE
#define USART_FLAG_EOB USART_ISR_EOBF /*!< Not available for STM32F030 devices */
#define USART_FLAG_RTO USART_ISR_RTOF
#define USART_FLAG_nCTSS USART_ISR_CTS
#define USART_FLAG_CTS USART_ISR_CTSIF
#define USART_FLAG_LBD USART_ISR_LBD /*!< Not available for STM32F030 devices */
#define USART_FLAG_TXE USART_ISR_TXE
#define USART_FLAG_TC USART_ISR_TC
#define USART_FLAG_RXNE USART_ISR_RXNE
#define USART_FLAG_IDLE USART_ISR_IDLE
#define USART_FLAG_ORE USART_ISR_ORE
#define USART_FLAG_NE USART_ISR_NE
#define USART_FLAG_FE USART_ISR_FE
#define USART_FLAG_PE USART_ISR_PE
#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \
((FLAG) == USART_FLAG_nCTSS) || ((FLAG) == USART_FLAG_RTO) || \
((FLAG) == USART_FLAG_EOB) || ((FLAG) == USART_FLAG_ABRE) || \
((FLAG) == USART_FLAG_ABRF) || ((FLAG) == USART_FLAG_BUSY) || \
((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_SBK) || \
((FLAG) == USART_FLAG_RWU) || ((FLAG) == USART_FLAG_WU) || \
((FLAG) == USART_FLAG_TEACK)|| ((FLAG) == USART_FLAG_REACK))
#define IS_USART_CLEAR_FLAG(FLAG) (((FLAG) == USART_FLAG_WU) || ((FLAG) == USART_FLAG_TC) || \
((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_ORE) || \
((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \
((FLAG) == USART_FLAG_LBD) || ((FLAG) == USART_FLAG_CTS) || \
((FLAG) == USART_FLAG_RTO) || ((FLAG) == USART_FLAG_EOB) || \
((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_PE))
/**
* @}
*/
/** @defgroup USART_Interrupt_definition
* @brief USART Interrupt definition
* USART_IT possible values
* Elements values convention: 0xZZZZYYXX
* XX: Position of the corresponding Interrupt
* YY: Register index
* ZZZZ: Flag position
* @{
*/
#define USART_IT_WU ((uint32_t)0x00140316) /*!< Not available for STM32F030 devices */
#define USART_IT_CM ((uint32_t)0x0011010E)
#define USART_IT_EOB ((uint32_t)0x000C011B) /*!< Not available for STM32F030 devices */
#define USART_IT_RTO ((uint32_t)0x000B011A)
#define USART_IT_PE ((uint32_t)0x00000108)
#define USART_IT_TXE ((uint32_t)0x00070107)
#define USART_IT_TC ((uint32_t)0x00060106)
#define USART_IT_RXNE ((uint32_t)0x00050105)
#define USART_IT_IDLE ((uint32_t)0x00040104)
#define USART_IT_LBD ((uint32_t)0x00080206) /*!< Not available for STM32F030 devices */
#define USART_IT_CTS ((uint32_t)0x0009030A)
#define USART_IT_ERR ((uint32_t)0x00000300)
#define USART_IT_ORE ((uint32_t)0x00030300)
#define USART_IT_NE ((uint32_t)0x00020300)
#define USART_IT_FE ((uint32_t)0x00010300)
#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR) || \
((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
((IT) == USART_IT_NE) || ((IT) == USART_IT_FE) || \
((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_PE) || \
((IT) == USART_IT_FE) || ((IT) == USART_IT_NE) || \
((IT) == USART_IT_ORE) || ((IT) == USART_IT_IDLE) || \
((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS) || \
((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
/**
* @}
*/
/** @defgroup USART_Global_definition
* @{
*/
#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x005B8D81))
#define IS_USART_DE_ASSERTION_DEASSERTION_TIME(TIME) ((TIME) <= 0x1F)
#define IS_USART_AUTO_RETRY_COUNTER(COUNTER) ((COUNTER) <= 0x7)
#define IS_USART_TIMEOUT(TIMEOUT) ((TIMEOUT) <= 0x00FFFFFF)
#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Initialization and Configuration functions *********************************/
void USART_DeInit(USART_TypeDef* USARTx);
void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_DirectionModeCmd(USART_TypeDef* USARTx, uint32_t USART_DirectionMode, FunctionalState NewState);
void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); /* Not available for STM32F030 devices */
void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_MSBFirstCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_DataInvCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_InvPinCmd(USART_TypeDef* USARTx, uint32_t USART_InvPin, FunctionalState NewState);
void USART_SWAPPinCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_ReceiverTimeOutCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SetReceiverTimeOut(USART_TypeDef* USARTx, uint32_t USART_ReceiverTimeOut);
/* STOP Mode functions ********************************************************/
void USART_STOPModeCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_StopModeWakeUpSourceConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUpSource); /* Not available for STM32F030 devices */
/* AutoBaudRate functions *****************************************************/
void USART_AutoBaudRateCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_AutoBaudRateConfig(USART_TypeDef* USARTx, uint32_t USART_AutoBaudRate);
/* Data transfers functions ***************************************************/
void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
/* Multi-Processor Communication functions ************************************/
void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
void USART_MuteModeWakeUpConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUp);
void USART_MuteModeCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_AddressDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_AddressLength);
/* LIN mode functions *********************************************************/
void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint32_t USART_LINBreakDetectLength); /* Not available for STM32F030 devices */
void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
/* Half-duplex mode function **************************************************/
void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* Smartcard mode functions ***************************************************/
void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); /* Not available for STM32F030 devices */
void USART_SetAutoRetryCount(USART_TypeDef* USARTx, uint8_t USART_AutoCount); /* Not available for STM32F030 devices */
void USART_SetBlockLength(USART_TypeDef* USARTx, uint8_t USART_BlockLength); /* Not available for STM32F030 devices */
/* IrDA mode functions ********************************************************/
void USART_IrDAConfig(USART_TypeDef* USARTx, uint32_t USART_IrDAMode); /* Not available for STM32F030 devices */
void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
/* RS485 mode functions *******************************************************/
void USART_DECmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_DEPolarityConfig(USART_TypeDef* USARTx, uint32_t USART_DEPolarity);
void USART_SetDEAssertionTime(USART_TypeDef* USARTx, uint32_t USART_DEAssertionTime);
void USART_SetDEDeassertionTime(USART_TypeDef* USARTx, uint32_t USART_DEDeassertionTime);
/* DMA transfers management functions *****************************************/
void USART_DMACmd(USART_TypeDef* USARTx, uint32_t USART_DMAReq, FunctionalState NewState);
void USART_DMAReceptionErrorConfig(USART_TypeDef* USARTx, uint32_t USART_DMAOnError);
/* Interrupts and flags management functions **********************************/
void USART_ITConfig(USART_TypeDef* USARTx, uint32_t USART_IT, FunctionalState NewState);
void USART_RequestCmd(USART_TypeDef* USARTx, uint32_t USART_Request, FunctionalState NewState);
void USART_OverrunDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_OVRDetection);
FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint32_t USART_FLAG);
void USART_ClearFlag(USART_TypeDef* USARTx, uint32_t USART_FLAG);
ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint32_t USART_IT);
void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint32_t USART_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0XX_USART_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|