/**
  ******************************************************************************
  * @file    stm32f0xx_hal_tim_ex.h
  * @author  MCD Application Team
  * @version V1.1.0
  * @date    03-Oct-2014
  * @brief   Header file of TIM HAL Extended module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_TIM_EX_H
#define __STM32F0xx_HAL_TIM_EX_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"

/** @addtogroup STM32F0xx_HAL_Driver
  * @{
  */

/** @addtogroup TIMEx
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/ 
/** @defgroup TIMEx_Exported_Types TIMEx Extended Exported Types
  * @{
  */

/** 
  * @brief  TIM Hall sensor Configuration Structure definition  
  */

typedef struct
{
                                  
  uint32_t IC1Polarity;            /*!< Specifies the active edge of the input signal.
                                        This parameter can be a value of @ref TIM_Input_Capture_Polarity */
                                                                   
  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
                                  
  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
  uint32_t Commutation_Delay;  /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
                                    This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */                              
} TIM_HallSensor_InitTypeDef;

/** 
  * @brief  TIM Master configuration Structure definition  
  */ 
typedef struct {
  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection 
                                      This parameter can be a value of @ref TIM_Master_Mode_Selection */ 
  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection 
                                      This parameter can be a value of @ref TIM_Master_Slave_Mode */
}TIM_MasterConfigTypeDef;

/** 
  * @brief  TIM Break and Dead time configuration Structure definition  
  */ 
typedef struct
{
  uint32_t OffStateRunMode;       /*!< TIM off state in run mode
                                     This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
  uint32_t OffStateIDLEMode;	    /*!< TIM off state in IDLE mode
                                     This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
  uint32_t LockLevel;             /*!< TIM Lock level
                                     This parameter can be a value of @ref TIM_Lock_level */                             
  uint32_t DeadTime;              /*!< TIM dead Time 
                                     This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
  uint32_t BreakState;            /*!< TIM Break State 
                                     This parameter can be a value of @ref TIM_Break_Input_enable_disable */
  uint32_t BreakPolarity;         /*!< TIM Break input polarity 
                                     This parameter can be a value of @ref TIM_Break_Polarity */
  uint32_t AutomaticOutput;       /*!< TIM Automatic Output Enable state 
                                     This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */           
} TIM_BreakDeadTimeConfigTypeDef;

/**
  * @}
  */ 

/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
  * @{
  */
    
/** @defgroup TIMEx_Remap TIMEx Remap
  * @{
  */

#define TIM_TIM14_GPIO          (0x00000000) /*!< TIM14 TI1 is connected to GPIO */
#define TIM_TIM14_RTC           (0x00000001) /*!< TIM14 TI1 is connected to RTC_clock */
#define TIM_TIM14_HSE           (0x00000002) /*!< TIM14 TI1 is connected to HSE/32 */
#define TIM_TIM14_MCO           (0x00000003) /*!< TIM14 TI1 is connected to MCO */

#define IS_TIM_REMAP(TIM_REMAP)   (((TIM_REMAP) == TIM_TIM14_GPIO)      ||\
                                  ((TIM_REMAP) == TIM_TIM14_RTC)       ||\
                                  ((TIM_REMAP) == TIM_TIM14_HSE)       ||\
                                  ((TIM_REMAP) == TIM_TIM14_MCO))
/**
  * @}
  */

/** @defgroup TIM_Clock_Filter TIM Clock Filter
  * @{
  */
#define IS_TIM_DEADTIME(DEADTIME)      ((DEADTIME) <= 0xFF) 
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions
  * @{
  */

/** @addtogroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions 
 *  @brief    Timer Hall Sensor functions
 * @{
 */
/*  Timer Hall Sensor functions  **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);

void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);

 /* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
 *  @brief   Timer Complementary Output Compare functions
 * @{
 */
/*  Timer Complementary Output Compare functions  *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
 *  @brief    Timer Complementary PWM functions
 * @{
 */
/*  Timer Complementary PWM functions  ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
 *  @brief    Timer Complementary One Pulse functions
 * @{
 */
/*  Timer Complementary One Pulse functions  **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
 *  @brief    Peripheral Control functions
 * @{
 */
/* Extended Control functions  ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions 
  * @brief    Extended Callbacks functions
  * @{
  */
/* Extension Callback *********************************************************/
void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
/**
  * @}
  */

/** @addtogroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions 
  * @brief    Extended Peripheral State functions
  * @{
  */
/* Extension Peripheral State functions  **************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/**
  * @}
  */ 

/**
  * @}
  */ 

/**
  * @}
  */
  
#ifdef __cplusplus
}
#endif


#endif /* __STM32F0xx_HAL_TIM_EX_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/