Files
@ 9336fdac7c05
Branch filter:
Location: therm/libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h
9336fdac7c05
10.5 KiB
text/plain
Add toggle GPIO func
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 | /**
******************************************************************************
* @file stm32f0xx_comp.h
* @author MCD Application Team
* @version V1.4.0
* @date 24-July-2014
* @brief This file contains all the functions prototypes for the COMP firmware
* library, applicable only for STM32F051 and STM32F072 devices.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_COMP_H
#define __STM32F0XX_COMP_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_StdPeriph_Driver
* @{
*/
/** @addtogroup COMP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief COMP Init structure definition
*/
typedef struct
{
uint32_t COMP_InvertingInput; /*!< Selects the inverting input of the comparator.
This parameter can be a value of @ref COMP_InvertingInput */
uint32_t COMP_Output; /*!< Selects the output redirection of the comparator.
This parameter can be a value of @ref COMP_Output */
uint32_t COMP_OutputPol; /*!< Selects the output polarity of the comparator.
This parameter can be a value of @ref COMP_OutputPolarity */
uint32_t COMP_Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
This parameter can be a value of @ref COMP_Hysteresis */
uint32_t COMP_Mode; /*!< Selects the operating mode of the comparator
and allows to adjust the speed/consumption.
This parameter can be a value of @ref COMP_Mode */
}COMP_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup COMP_Exported_Constants
* @{
*/
/** @defgroup COMP_Selection
* @{
*/
#define COMP_Selection_COMP1 ((uint32_t)0x00000000) /*!< COMP1 Selection */
#define COMP_Selection_COMP2 ((uint32_t)0x00000010) /*!< COMP2 Selection */
#define IS_COMP_ALL_PERIPH(PERIPH) (((PERIPH) == COMP_Selection_COMP1) || \
((PERIPH) == COMP_Selection_COMP2))
/**
* @}
*/
/** @defgroup COMP_InvertingInput
* @{
*/
#define COMP_InvertingInput_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
#define COMP_InvertingInput_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
#define COMP_InvertingInput_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
#define COMP_InvertingInput_VREFINT ((uint32_t)0x00000030) /*!< VREFINT connected to comparator inverting input */
#define COMP_InvertingInput_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC1_OUT (PA4) connected to comparator inverting input */
#define COMP_InvertingInput_DAC2 ((uint32_t)0x00000050) /*!< DAC2_OUT (PA5) connected to comparator inverting input, applicable only for STM32F072 devices */
#define COMP_InvertingInput_IO ((uint32_t)0x00000060) /*!< I/O (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */
#define IS_COMP_INVERTING_INPUT(INPUT) (((INPUT) == COMP_InvertingInput_1_4VREFINT) || \
((INPUT) == COMP_InvertingInput_1_2VREFINT) || \
((INPUT) == COMP_InvertingInput_3_4VREFINT) || \
((INPUT) == COMP_InvertingInput_VREFINT) || \
((INPUT) == COMP_InvertingInput_DAC1) || \
((INPUT) == COMP_InvertingInput_DAC2) || \
((INPUT) == COMP_InvertingInput_1_4VREFINT) || \
((INPUT) == COMP_InvertingInput_IO))
/**
* @}
*/
/** @defgroup COMP_Output
* @{
*/
#define COMP_Output_None ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
#define COMP_Output_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define COMP_Output_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */
#define COMP_Output_TIM1OCREFCLR ((uint32_t)0x00000300) /*!< COMP output connected to TIM1 OCREF Clear */
#define COMP_Output_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */
#define COMP_Output_TIM2OCREFCLR ((uint32_t)0x00000500) /*!< COMP output connected to TIM2 OCREF Clear */
#define COMP_Output_TIM3IC1 ((uint32_t)0x00000600) /*!< COMP output connected to TIM3 Input Capture 1 */
#define COMP_Output_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */
#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_Output_None) || \
((OUTPUT) == COMP_Output_TIM1BKIN) || \
((OUTPUT) == COMP_Output_TIM1IC1) || \
((OUTPUT) == COMP_Output_TIM1OCREFCLR) || \
((OUTPUT) == COMP_Output_TIM2IC4) || \
((OUTPUT) == COMP_Output_TIM2OCREFCLR) || \
((OUTPUT) == COMP_Output_TIM3IC1) || \
((OUTPUT) == COMP_Output_TIM3OCREFCLR))
/**
* @}
*/
/** @defgroup COMP_OutputPolarity
* @{
*/
#define COMP_OutputPol_NonInverted ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
#define COMP_OutputPol_Inverted COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */
#define IS_COMP_OUTPUT_POL(POL) (((POL) == COMP_OutputPol_NonInverted) || \
((POL) == COMP_OutputPol_Inverted))
/**
* @}
*/
/** @defgroup COMP_Hysteresis
* @{
*/
/* Please refer to the electrical characteristics in the device datasheet for
the hysteresis level */
#define COMP_Hysteresis_No 0x00000000 /*!< No hysteresis */
#define COMP_Hysteresis_Low COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */
#define COMP_Hysteresis_Medium COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */
#define COMP_Hysteresis_High COMP_CSR_COMP1HYST /*!< Hysteresis level high */
#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_Hysteresis_No) || \
((HYSTERESIS) == COMP_Hysteresis_Low) || \
((HYSTERESIS) == COMP_Hysteresis_Medium) || \
((HYSTERESIS) == COMP_Hysteresis_High))
/**
* @}
*/
/** @defgroup COMP_Mode
* @{
*/
/* Please refer to the electrical characteristics in the device datasheet for
the power consumption values */
#define COMP_Mode_HighSpeed 0x00000000 /*!< High Speed */
#define COMP_Mode_MediumSpeed COMP_CSR_COMP1MODE_0 /*!< Medium Speed */
#define COMP_Mode_LowPower COMP_CSR_COMP1MODE_1 /*!< Low power mode */
#define COMP_Mode_UltraLowPower COMP_CSR_COMP1MODE /*!< Ultra-low power mode */
#define IS_COMP_MODE(MODE) (((MODE) == COMP_Mode_UltraLowPower) || \
((MODE) == COMP_Mode_LowPower) || \
((MODE) == COMP_Mode_MediumSpeed) || \
((MODE) == COMP_Mode_HighSpeed))
/**
* @}
*/
/** @defgroup COMP_OutputLevel
* @{
*/
/* When output polarity is not inverted, comparator output is high when
the non-inverting input is at a higher voltage than the inverting input */
#define COMP_OutputLevel_High COMP_CSR_COMP1OUT
/* When output polarity is not inverted, comparator output is low when
the non-inverting input is at a lower voltage than the inverting input*/
#define COMP_OutputLevel_Low ((uint32_t)0x00000000)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the COMP configuration to the default reset state ****/
void COMP_DeInit(void);
/* Initialization and Configuration functions *********************************/
void COMP_Init(uint32_t COMP_Selection, COMP_InitTypeDef* COMP_InitStruct);
void COMP_StructInit(COMP_InitTypeDef* COMP_InitStruct);
void COMP_Cmd(uint32_t COMP_Selection, FunctionalState NewState);
void COMP_SwitchCmd(FunctionalState NewState);
uint32_t COMP_GetOutputLevel(uint32_t COMP_Selection);
/* Window mode control function ***********************************************/
void COMP_WindowCmd(FunctionalState NewState);
/* COMP configuration locking function ****************************************/
void COMP_LockConfig(uint32_t COMP_Selection);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F0XX_COMP_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|