Files
@ facb8c86942c
Branch filter:
Location: therm/drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h
facb8c86942c
56.5 KiB
text/plain
Removed dead code, fixed SPI clock rate, removed unneeded delays
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 | /**
******************************************************************************
* @file stm32f0xx_hal_rcc.h
* @author MCD Application Team
* @version V1.1.0
* @date 03-Oct-2014
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_RCC_H
#define __STM32F0xx_HAL_RCC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup RCC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RCC_Exported_Types RCC Exported Types
* @{
*/
/**
* @brief RCC PLL configuration structure definition
*/
typedef struct
{
uint32_t PLLState; /*!< PLLState: The new state of the PLL.
This parameter can be a value of @ref RCC_PLL_Config */
uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
This parameter must be a value of @ref RCC_PLL_Clock_Source */
uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
This parameter must be a value of @ref RCC_PLL_Multiplication_Factor */
}RCC_PLLInitTypeDef;
/**
* @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
*/
typedef struct
{
uint32_t OscillatorType; /*!< The Oscillators to be configured.
This parameter can be a value of @ref RCC_Oscillator_Type */
uint32_t HSEState; /*!< The new state of the HSE.
This parameter can be a value of @ref RCC_HSE_Config */
uint32_t LSEState; /*!< The new state of the LSE.
This parameter can be a value of @ref RCC_LSE_Config */
uint32_t HSIState; /*!< The new state of the HSI.
This parameter can be a value of @ref RCC_HSI_Config */
uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
uint32_t HSI14State; /*!< The new state of the HSI14.
This parameter can be a value of @ref RCC_HSI14_Config */
uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x and STM32F0x2 devices).
This parameter can be a value of @ref RCCEx_HSI48_Config */
uint32_t LSIState; /*!< The new state of the LSI.
This parameter can be a value of @ref RCC_LSI_Config */
RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
}RCC_OscInitTypeDef;
/**
* @brief RCC System, AHB and APB busses clock configuration structure definition
*/
typedef struct
{
uint32_t ClockType; /*!< The clock to be configured.
This parameter can be a value of @ref RCC_System_Clock_Type */
uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
This parameter can be a value of @ref RCC_System_Clock_Source */
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_AHB_Clock_Source */
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_APB1_Clock_Source */
}RCC_ClkInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RCC_Exported_Constants RCC Exported Constants
* @{
*/
/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
* @brief RCC registers bit address in the alias region
* @{
*/
#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
/* --- CR Register ---*/
#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
/* --- CFGR Register ---*/
#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x04)
/* --- CIR Register ---*/
#define RCC_CIR_OFFSET (RCC_OFFSET + 0x08)
/* --- BDCR Register ---*/
#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x20)
/* --- CSR Register ---*/
#define RCC_CSR_OFFSET (RCC_OFFSET + 0x24)
/* --- CR2 Register ---*/
#define RCC_CR2_OFFSET (RCC_OFFSET + 0x34)
/* CR register byte 2 (Bits[23:16]) base address */
#define RCC_CR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CR_OFFSET + 0x02)
/* CIR register byte 1 (Bits[15:8]) base address */
#define RCC_CIR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x01)
/* CIR register byte 2 (Bits[23:16]) base address */
#define RCC_CIR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x02)
/* CSR register byte 1 (Bits[15:8]) base address */
#define RCC_CSR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CSR_OFFSET + 0x01)
/* BDCR register byte 0 (Bits[7:0] base address */
#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
#define RCC_CFGR_PLLMUL_BITNUMBER 18
#define RCC_CFGR2_PREDIV_BITNUMBER 0
/**
* @}
*/
/** @defgroup RCC_Timeout RCC Timeout
* @{
*/
/* LSE state change timeout */
#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
/* Disable Backup domain write protection state change timeout */
#define DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
/**
* @}
*/
/** @defgroup RCC_Oscillator_Type RCC Oscillator Type
* @{
*/
#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
#define RCC_OSCILLATORTYPE_HSI14 ((uint32_t)0x00000010)
#define RCC_OSCILLATORTYPE_HSI48 ((uint32_t)0x00000020)
#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
(((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
(((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
(((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
(((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
(((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \
(((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))
/**
* @}
*/
/** @defgroup RCC_HSE_Config RCC HSE Config
* @{
*/
#define RCC_HSE_OFF ((uint8_t)0x00)
#define RCC_HSE_ON ((uint8_t)0x01)
#define RCC_HSE_BYPASS ((uint8_t)0x05)
#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
((HSE) == RCC_HSE_BYPASS))
/**
* @}
*/
/** @defgroup RCC_LSE_Config RCC_LSE_Config
* @{
*/
#define RCC_LSE_OFF ((uint8_t)0x00)
#define RCC_LSE_ON ((uint8_t)0x01)
#define RCC_LSE_BYPASS ((uint8_t)0x05)
#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
((LSE) == RCC_LSE_BYPASS))
/**
* @}
*/
/** @defgroup RCC_HSI_Config RCC HSI Config
* @{
*/
#define RCC_HSI_OFF ((uint8_t)0x00)
#define RCC_HSI_ON ((uint8_t)0x01)
#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */
/**
* @}
*/
/** @defgroup RCC_HSI14_Config RCC HSI14 Config
* @{
*/
#define RCC_HSI14_OFF ((uint32_t)0x00)
#define RCC_HSI14_ON RCC_CR2_HSI14ON
#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS)
#define IS_RCC_HSI14(HSI14) (((HSI14) == RCC_HSI14_OFF) || ((HSI14) == RCC_HSI14_ON) || ((HSI14) == RCC_HSI14_ADC_CONTROL))
#define RCC_HSI14CALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI14 calibration trimming value */
/**
* @}
*/
/** @defgroup RCC_LSI_Config RCC LSI Config
* @{
*/
#define RCC_LSI_OFF ((uint8_t)0x00)
#define RCC_LSI_ON ((uint8_t)0x01)
#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
/**
* @}
*/
/** @defgroup RCC_PLL_Config RCC PLL Config
* @{
*/
#define RCC_PLL_NONE ((uint8_t)0x00)
#define RCC_PLL_OFF ((uint8_t)0x01)
#define RCC_PLL_ON ((uint8_t)0x02)
#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
/**
* @}
*/
/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
* @{
*/
#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
#define IS_RCC_PREDIV(PREDIV) (((PREDIV) == RCC_PREDIV_DIV1) || ((PREDIV) == RCC_PREDIV_DIV2) || \
((PREDIV) == RCC_PREDIV_DIV3) || ((PREDIV) == RCC_PREDIV_DIV4) || \
((PREDIV) == RCC_PREDIV_DIV5) || ((PREDIV) == RCC_PREDIV_DIV6) || \
((PREDIV) == RCC_PREDIV_DIV7) || ((PREDIV) == RCC_PREDIV_DIV8) || \
((PREDIV) == RCC_PREDIV_DIV9) || ((PREDIV) == RCC_PREDIV_DIV10) || \
((PREDIV) == RCC_PREDIV_DIV11) || ((PREDIV) == RCC_PREDIV_DIV12) || \
((PREDIV) == RCC_PREDIV_DIV13) || ((PREDIV) == RCC_PREDIV_DIV14) || \
((PREDIV) == RCC_PREDIV_DIV15) || ((PREDIV) == RCC_PREDIV_DIV16))
/**
* @}
*/
/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
* @{
*/
#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLL_MUL2) || ((MUL) == RCC_PLL_MUL3) || \
((MUL) == RCC_PLL_MUL4) || ((MUL) == RCC_PLL_MUL5) || \
((MUL) == RCC_PLL_MUL6) || ((MUL) == RCC_PLL_MUL7) || \
((MUL) == RCC_PLL_MUL8) || ((MUL) == RCC_PLL_MUL9) || \
((MUL) == RCC_PLL_MUL10) || ((MUL) == RCC_PLL_MUL11) || \
((MUL) == RCC_PLL_MUL12) || ((MUL) == RCC_PLL_MUL13) || \
((MUL) == RCC_PLL_MUL14) || ((MUL) == RCC_PLL_MUL15) || \
((MUL) == RCC_PLL_MUL16))
/**
* @}
*/
/** @defgroup RCC_PLL_Clock_Source RCC PLL Clock Source
* @{
*/
#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
/**
* @}
*/
/** @defgroup RCC_System_Clock_Type RCC System Clock Type
* @{
*/
#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
(((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
(((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1))
/**
* @}
*/
/** @defgroup RCC_System_Clock_Source RCC System Clock Source
* @{
*/
#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
/**
* @}
*/
/** @defgroup RCC_System_Clock_Source_Status RCC System Clock Source Status
* @{
*/
#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE
#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL
/**
* @}
*/
/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
* @{
*/
#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
#define IS_RCC_SYSCLK_DIV(DIV) (((DIV) == RCC_SYSCLK_DIV1) || ((DIV) == RCC_SYSCLK_DIV2) || \
((DIV) == RCC_SYSCLK_DIV4) || ((DIV) == RCC_SYSCLK_DIV8) || \
((DIV) == RCC_SYSCLK_DIV16) || ((DIV) == RCC_SYSCLK_DIV64) || \
((DIV) == RCC_SYSCLK_DIV128) || ((DIV) == RCC_SYSCLK_DIV256) || \
((DIV) == RCC_SYSCLK_DIV512))
/**
* @}
*/
/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source
* @{
*/
#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1
#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2
#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4
#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8
#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16
#define IS_RCC_HCLK_DIV(DIV) (((DIV) == RCC_HCLK_DIV1) || ((DIV) == RCC_HCLK_DIV2) || \
((DIV) == RCC_HCLK_DIV4) || ((DIV) == RCC_HCLK_DIV8) || \
((DIV) == RCC_HCLK_DIV16))
/**
* @}
*/
/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
* @{
*/
#define RCC_RTCCLKSOURCE_NONE RCC_BDCR_RTCSEL_NOCLOCK
#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE
#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI
#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE
#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_NONE) || \
((SOURCE) == RCC_RTCCLKSOURCE_LSE) || \
((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32))
/**
* @}
*/
/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source
* @{
*/
#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
((SOURCE) == RCC_USART1CLKSOURCE_HSI))
/**
* @}
*/
/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
* @{
*/
#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \
((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK))
/**
* @}
*/
/** @defgroup RCC_MCOx_Index RCC MCOx Index
* @{
*/
#define RCC_MCO ((uint32_t)0x00000000)
#define IS_RCC_MCO(MCOx) ((MCOx) == RCC_MCO)
/**
* @}
*/
/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source
* @{
*/
#define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
#define RCC_MCOSOURCE_LSI RCC_CFGR_MCO_LSI
#define RCC_MCOSOURCE_LSE RCC_CFGR_MCO_LSE
#define RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
#define RCC_MCOSOURCE_HSI RCC_CFGR_MCO_HSI
#define RCC_MCOSOURCE_HSE RCC_CFGR_MCO_HSE
#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
#define RCC_MCOSOURCE_HSI14 RCC_CFGR_MCO_HSI14
/**
* @}
*/
/** @defgroup RCC_Interrupt RCC Interrupt
* @{
*/
#define RCC_IT_LSIRDY ((uint8_t)0x01)
#define RCC_IT_LSERDY ((uint8_t)0x02)
#define RCC_IT_HSIRDY ((uint8_t)0x04)
#define RCC_IT_HSERDY ((uint8_t)0x08)
#define RCC_IT_PLLRDY ((uint8_t)0x10)
#define RCC_IT_HSI14 ((uint8_t)0x20)
#define RCC_IT_CSS ((uint8_t)0x80)
/**
* @}
*/
/** @defgroup RCC_Flag RCC Flag
* Elements values convention: 0XXYYYYYb
* - YYYYY : Flag position in the register
* - XX : Register index
* - 00: CR register
* - 01: CR2 register
* - 10: BDCR register
* - 11: CSR register
* @{
*/
#define CR_REG_INDEX 0
#define CR2_REG_INDEX 1
#define BDCR_REG_INDEX 2
#define CSR_REG_INDEX 3
/* Flags in the CR register */
#define RCC_CR_HSIRDY_BitNumber 1
#define RCC_CR_HSERDY_BitNumber 17
#define RCC_CR_PLLRDY_BitNumber 25
#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSIRDY_BitNumber))
#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSERDY_BitNumber))
#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_PLLRDY_BitNumber))
/* Flags in the CR2 register */
#define RCC_CR2_HSI14RDY_BitNumber 1
#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5) | RCC_CR2_HSI14RDY_BitNumber))
/* Flags in the BDCR register */
#define RCC_BDCR_LSERDY_BitNumber 1
#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5) | RCC_BDCR_LSERDY_BitNumber))
/* Flags in the CSR register */
#define RCC_CSR_LSIRDY_BitNumber 1
#define RCC_CSR_V18PWRRSTF_BitNumber 23
#define RCC_CSR_RMVF_BitNumber 24
#define RCC_CSR_OBLRSTF_BitNumber 25
#define RCC_CSR_PINRSTF_BitNumber 26
#define RCC_CSR_PORRSTF_BitNumber 27
#define RCC_CSR_SFTRSTF_BitNumber 28
#define RCC_CSR_IWDGRSTF_BitNumber 29
#define RCC_CSR_WWDGRSTF_BitNumber 30
#define RCC_CSR_LPWRRSTF_BitNumber 31
#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
#define RCC_FLAG_RMV ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_RMVF_BitNumber))
#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_OBLRSTF_BitNumber))
#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PINRSTF_BitNumber))
#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PORRSTF_BitNumber))
#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_SFTRSTF_BitNumber))
#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_IWDGRSTF_BitNumber))
#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_WWDGRSTF_BitNumber))
#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LPWRRSTF_BitNumber))
/**
* @}
*/
/** @defgroup RCC_Calibration_values RCC Calibration values
* @{
*/
#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
/**
* @}
*/
/** @addtogroup RCC_Timeout
* @{
*/
#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
#define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
#define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
#define HSI14_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
#define HSI48_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
#define PLL_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup RCC_Exported_Macros RCC Exported Macros
* @{
*/
/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
* @brief Enable or disable the AHB peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __GPIOA_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOAEN))
#define __GPIOB_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOBEN))
#define __GPIOC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOCEN))
#define __GPIOF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOFEN))
#define __CRC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_CRCEN))
#define __DMA1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA1EN))
#define __SRAM_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_SRAMEN))
#define __FLITF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_FLITFEN))
#define __GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
#define __GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
#define __GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
#define __GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
#define __CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
#define __DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
#define __SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
#define __FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
/**
* @}
*/
/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
#define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
#define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
/**
* @}
*/
/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
* @{
*/
#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
#define __TIM16_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM16EN))
#define __TIM17_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM17EN))
#define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
#define __DBGMCU_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_DBGMCUEN))
#define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
#define __TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
#define __TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
#define __DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN))
/**
* @}
*/
/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
* @brief Force or release AHB peripheral reset.
* @{
*/
#define __AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
#define __GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
#define __GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
#define __GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
#define __GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
#define __AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
#define __GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
#define __GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
#define __GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
#define __GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
/**
* @}
*/
/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
* @brief Force or release APB1 peripheral reset.
* @{
*/
#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
#define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
#define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
#define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
#define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
/**
* @}
*/
/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
* @brief Force or release APB2 peripheral reset.
* @{
*/
#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
#define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
#define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
#define __TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
#define __TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
#define __DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST))
#define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
#define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
#define __ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
#define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
#define __TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
#define __TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
#define __DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST))
/**
* @}
*/
/** @defgroup RCC_HSI_Configuration RCC HSI Configuration
* @{
*/
/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
* @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
* It is used (enabled by hardware) as system clock source after startup
* from Reset, wakeup from STOP and STANDBY mode, or in case of failure
* of the HSE used directly or indirectly as system clock (if the Clock
* Security System CSS is enabled).
* @note HSI can not be stopped if it is used as system clock source. In this case,
* you have to select another source of the system clock then stop the HSI.
* @note After enabling the HSI, the application software should wait on HSIRDY
* flag to be set indicating that HSI clock is stable and can be used as
* system clock source.
* @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
* clock cycles.
*/
#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI RC.
* @param __HSICalibrationValue__: specifies the calibration trimming value
* (default is RCC_HSICALIBRATION_DEFAULT).
* This parameter must be a number between 0 and 0x1F.
*/
#define RCC_CR_HSITRIM_BitNumber 3
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_BitNumber)
/**
* @}
*/
/** @defgroup RCC_LSI_Configuration RCC LSI Configuration
* @{
*/
/** @brief Macro to enable or disable the Internal Low Speed oscillator (LSI).
* @note After enabling the LSI, the application software should wait on
* LSIRDY flag to be set indicating that LSI clock is stable and can
* be used to clock the IWDG and/or the RTC.
* @note LSI can not be disabled if the IWDG is running.
* @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
* clock cycles.
*/
#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
/**
* @}
*/
/** @defgroup RCC_HSE_Configuration RCC HSE Configuration
* @{
*/
/**
* @brief Macro to configure the External High Speed oscillator (HSE).
* @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
* software should wait on HSERDY flag to be set indicating that HSE clock
* is stable and can be used to clock the PLL and/or system clock.
* @note HSE state can not be changed if it is used directly or through the
* PLL as system clock. In this case, you have to select another source
* of the system clock then change the HSE state (ex. disable it).
* @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
* @note This function reset the CSSON bit, so if the Clock security system(CSS)
* was previously enabled you have to enable it again after calling this
* function.
* @param __STATE__: specifies the new state of the HSE.
* This parameter can be one of the following values:
* @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
* 6 HSE oscillator clock cycles.
* @arg RCC_HSE_ON: turn ON the HSE oscillator
* @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock
*/
#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *)RCC_CR_BYTE2_ADDRESS = (__STATE__))
/**
* @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
* @note Predivision factor can not be changed if PLL is used as system clock
* In this case, you have to select another source of the system clock, disable the PLL and
* then change the HSE predivision factor.
* @param __HSEPredivValue__: specifies the division value applied to HSE.
* This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
*/
#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSEPredivValue__) \
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSEPredivValue__))
/**
* @}
*/
/** @defgroup RCC_LSE_Configuration RCC LSE Configuration
* @{
*/
/**
* @brief Macro to configure the External Low Speed oscillator (LSE).
* @note As the LSE is in the Backup domain and write access is denied to
* this domain after reset, you have to enable write access using
* HAL_PWR_EnableBkUpAccess() function before to configure the LSE
* (to be done once after reset).
* @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
* software should wait on LSERDY flag to be set indicating that LSE clock
* is stable and can be used to clock the RTC.
* @param __STATE__: specifies the new state of the LSE.
* This parameter can be one of the following values:
* @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
* 6 LSE oscillator clock cycles.
* @arg RCC_LSE_ON: turn ON the LSE oscillator
* @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock
*/
#define __HAL_RCC_LSE_CONFIG(__STATE__) \
MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEON|RCC_BDCR_LSEBYP, (uint32_t)(__STATE__))
/**
* @}
*/
/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration
* @{
*/
/** @brief Macros to enable or disable the Internal 14Mhz High Speed oscillator (HSI14).
* @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes.
* @note HSI14 can not be stopped if it is used as system clock source. In this case,
* you have to select another source of the system clock then stop the HSI14.
* @note After enabling the HSI14 with __HAL_RCC_HSI14_ENABLE(), the application software
* should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be
* used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
* @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator
* clock cycles.
*/
#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON)
#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON)
/** @brief macros to Enable or Disable the Internal 14Mhz High Speed oscillator (HSI14) usage by ADC.
*/
#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI14 RC.
* @param __HSI14CalibrationValue__: specifies the calibration trimming value
* (default is RCC_HSI14CALIBRATION_DEFAULT).
* This parameter must be a number between 0 and 0x1F.
*/
#define RCC_CR2_HSI14TRIM_BitNumber 3
#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CalibrationValue__) \
MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CalibrationValue__) << RCC_CR2_HSI14TRIM_BitNumber)
/**
* @}
*/
/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
* @{
*/
/** @brief Macro to configure the USART1 clock (USART1CLK).
* @param __USART1CLKSource__: specifies the USART1 clock source.
* This parameter can be one of the following values:
* @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
* @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
* @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
* @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
*/
#define __HAL_RCC_USART1_CONFIG(__USART1CLKSource__) \
MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSource__))
/** @brief Macro to get the USART1 clock source.
* @retval The clock source can be one of the following values:
* @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
* @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
* @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
* @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
*/
#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
/**
* @}
*/
/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
* @{
*/
/** @brief Macro to configure the I2C1 clock (I2C1CLK).
* @param __I2C1CLKSource__: specifies the I2C1 clock source.
* This parameter can be one of the following values:
* @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
* @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
*/
#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSource__) \
MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSource__))
/** @brief Macro to get the I2C1 clock source.
* @retval The clock source can be one of the following values:
* @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
* @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
*/
#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
/**
* @}
*/
/** @addtogroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
* @{
*/
/** @brief Macro to configure the USART2 clock (USART2CLK).
* @param __USART2CLKSource__: specifies the USART2 clock source.
* This parameter can be one of the following values:
* @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
* @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
* @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
* @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
*/
#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
/** @brief Macro to get the USART2 clock source.
* @retval The clock source can be one of the following values:
* @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
* @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
* @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
* @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
*/
#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
/**
* @}
*/
/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
* @{
*/
/** @brief Macros to enable or disable the the RTC clock.
* @note These macros must be used only after the RTC clock source was selected.
*/
#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
/** @brief Macro to configure the RTC clock (RTCCLK).
* @note As the RTC clock configuration bits are in the Backup domain and write
* access is denied to this domain after reset, you have to enable write
* access using the Power Backup Access macro before to configure
* the RTC clock source (to be done once after reset).
* @note Once the RTC clock is configured it can't be changed unless the
* Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
* a Power On Reset (POR).
* @param __RTCCLKSource__: specifies the RTC clock source.
* This parameter can be one of the following values:
* @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
* @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
* @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
* @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32
*
* @note If the LSE is used as RTC clock source, the RTC continues to
* work in STOP and STANDBY modes, and can be used as wakeup source.
* However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
* the RTC cannot be used in STOP and STANDBY modes.
* @note The system must always be configured so as to get a PCLK frequency greater than or
* equal to the RTCCLK frequency for a proper operation of the RTC.
*/
#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) \
MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (uint32_t)(__RTCCLKSource__))
/** @brief Macro to get the RTC clock source.
* @retval The clock source can be one of the following values:
* @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
* @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
* @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
* @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected as RTC clock
*/
#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
/**
* @}
*/
/** @defgroup RCC_Force_Release_Backup RCC Force Release Backup
* @{
*/
/** @brief Macro to force or release the Backup domain reset.
* @note These macros reset the RTC peripheral (including the backup registers)
* and the RTC clock source selection in RCC_CSR register.
* @note The BKPSRAM is not affected by this reset.
*/
#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST)
#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST)
/**
* @}
*/
/** @defgroup RCC_PLL_Configuration RCC PLL Configuration
* @{
*/
/** @brief Macro to enable or disable the PLL.
* @note After enabling the PLL, the application software should wait on
* PLLRDY flag to be set indicating that PLL clock is stable and can
* be used as system clock source.
* @note The PLL can not be disabled if it is used as system clock source
* @note The PLL is disabled by hardware when entering STOP and STANDBY modes.
*/
#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
/** @brief Macro to configure the PLL clock source, multiplication and division factors.
* @note This macro must be used only when the PLL is disabled.
*
* @param __RCC_PLLSource__: specifies the PLL entry clock source.
* This parameter can be one of the following values:
* @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
* @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
* @param __PREDIV__: specifies the predivider factor for PLL VCO input clock
* This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
* @param __PLLMUL__: specifies the multiplication factor for PLL VCO input clock
* This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
*
*/
#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PREDIV__, __PLLMUL__) \
do { \
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
} while(0)
/**
* @}
*/
/** @defgroup RCC_Get_Clock_source RCC Get Clock source
* @{
*/
/** @brief Macro to get the clock source used as system clock.
* @retval The clock source used as system clock.
* The returned value can be one of the following value:
* @arg RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock
* @arg RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock
* @arg RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock
*/
#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)))
/** @brief Macro to get the oscillator used as PLL clock source.
* @retval The oscillator used as PLL clock source. The returned value can be one
* of the following:
* - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
* - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
*/
#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
/**
* @}
*/
/** @defgroup RCC_Flags_Interrupts_Management RCC Flags Interrupts Management
* @brief macros to manage the specified RCC Flags and interrupts.
* @{
*/
/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to enable
* the selected interrupts.).
* @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt enable
* @arg RCC_IT_LSERDY: LSE ready interrupt enable
* @arg RCC_IT_HSIRDY: HSI ready interrupt enable
* @arg RCC_IT_HSERDY: HSE ready interrupt enable
* @arg RCC_IT_PLLRDY: PLL ready interrupt enable
* @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
* @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
*/
#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to disable
* the selected interrupts.).
* @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt enable
* @arg RCC_IT_LSERDY: LSE ready interrupt enable
* @arg RCC_IT_HSIRDY: HSI ready interrupt enable
* @arg RCC_IT_HSERDY: HSE ready interrupt enable
* @arg RCC_IT_PLLRDY: PLL ready interrupt enable
* @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
* @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
*/
#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
/** @brief Clear the RCC's interrupt pending bits ( Perform Byte access to RCC_CIR[23:16]
* bits to clear the selected interrupt pending bits.
* @param __IT__: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt clear
* @arg RCC_IT_LSERDY: LSE ready interrupt clear
* @arg RCC_IT_HSIRDY: HSI ready interrupt clear
* @arg RCC_IT_HSERDY: HSE ready interrupt clear
* @arg RCC_IT_PLLRDY: PLL ready interrupt clear
* @arg RCC_IT_HSI14RDY: HSI14 ready interrupt clear
* @arg RCC_IT_HSI48RDY: HSI48 ready interrupt clear (only applicable to STM32F0X2 USB devices)
* @arg RCC_IT_CSS: Clock Security System interrupt clear
*/
#define __HAL_RCC_CLEAR_IT(__IT__) (*(__IO uint8_t *)RCC_CIR_BYTE2_ADDRESS = (__IT__))
/** @brief Check the RCC's interrupt has occurred or not.
* @param __IT__: specifies the RCC interrupt source to check.
* This parameter can be one of the following values:
* @arg RCC_IT_LSIRDY: LSI ready interrupt flag
* @arg RCC_IT_LSERDY: LSE ready interrupt flag
* @arg RCC_IT_HSIRDY: HSI ready interrupt flag
* @arg RCC_IT_HSERDY: HSE ready interrupt flag
* @arg RCC_IT_PLLRDY: PLL ready interrupt flag
* @arg RCC_IT_HSI14RDY: HSI14 ready interrupt flag
* @arg RCC_IT_HSI48RDY: HSI48 ready interrupt flag (only applicable to STM32F0X2 USB devices)
* @arg RCC_IT_CSS: Clock Security System interrupt flag
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_RCC_GET_IT(__IT__) ((RCC->CIR & (__IT__)) == (__IT__))
/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
* RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
*/
#define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->CSR, RCC_CSR_RMVF)
/** @brief Check RCC flag is set or not.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
* @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
* @arg RCC_FLAG_PLLRDY: PLL clock ready
* @arg RCC_FLAG_HSI14RDY: HSI14 oscillator clock ready
* @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready (only applicable to STM32F0X2 USB devices)
* @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
* @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
* @arg RCC_FLAG_OBLRST: Option Byte Load reset
* @arg RCC_FLAG_PINRST: Pin reset
* @arg RCC_FLAG_PORRST: POR/PDR reset
* @arg RCC_FLAG_SFTRST: Software reset
* @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
* @arg RCC_FLAG_WWDGRST: Window Watchdog reset
* @arg RCC_FLAG_LPWRRST: Low Power reset
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define RCC_FLAG_MASK ((uint8_t)0x1F)
#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5) == CR_REG_INDEX)? RCC->CR : \
(((__FLAG__) >> 5) == CR2_REG_INDEX)? RCC->CR2 : \
(((__FLAG__) >> 5) == BDCR_REG_INDEX) ? RCC->BDCR : \
RCC->CSR) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))
/**
* @}
*/
/**
* @}
*/
/* Include RCC HAL Extension module */
#include "stm32f0xx_hal_rcc_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RCC_Exported_Functions
* @{
*/
/** @addtogroup RCC_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ***************************/
void HAL_RCC_DeInit(void);
HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
/**
* @}
*/
/** @addtogroup RCC_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions *********************************************/
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
void HAL_RCC_EnableCSS(void);
void HAL_RCC_DisableCSS(void);
uint32_t HAL_RCC_GetSysClockFreq(void);
uint32_t HAL_RCC_GetHCLKFreq(void);
uint32_t HAL_RCC_GetPCLK1Freq(void);
void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
/* CSS NMI IRQ handler */
void HAL_RCC_NMI_IRQHandler(void);
/* User Callbacks in non blocking mode (IT mode) */
void HAL_RCC_CCSCallback(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_RCC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|