therm Changeset - b5b1fc08b294 · protofusion repositories

Changeset - b5b1fc08b294

Parent rev.

Child rev.

[Not reviewed]

cortex-f0

0 5 0

Ethan Zonca - 10 years ago 2015-03-29 20:58:14
ez@ethanzonca.com

Added virtual serial port periodic transmission of temperature. Trying out bootloader code, but still doesn't work.

5 files changed with 53 insertions and 23 deletions:

config.h

flash.sh

main.c

startup_stm32f042x6.s

usbd_cdc_if.c

0 comments (0 inline, 0 general)

config.h

➞

Show inline comments

 #ifndef CONFIG_H
 #define CONFIG_H
+#define VCP_TX_FREQ 1000
 #define SSR_PERIOD 200
 #define LED_POWER GPIOF,GPIO_PIN_0

flash.sh

➞

Show inline comments

@@ @@ -2,3 +2,7 @@ @@
 cd build
 st-flash write main.bin 0x8000000
 cd ..
 # USB DFU:
 # sudo  dfu-util -a 0 -d 0483:df11 -s 0x08000000:leave -D build/main.bin

main.c

➞

Show inline comments

@@ @@ -231,20 +231,6 @@ void update_temp() { @@
             temp = temp_pre * signint;
+        }
+    }
     // Print temp to cdc
 /*
     CDC_Transmit_FS("Temp: ", 6);
     char tempstr[6];
     zitoa(temp, tempstr);
     CDC_Transmit_FS(tempstr, sizeof(tempstr));
     CDC_Transmit_FS("\r\n", 2);
     CDC_Transmit_FS("\r\n", 2);
     CDC_Transmit_FS("\r\n", 2);
     CDC_Transmit_FS("\r\n", 2);
     CDC_Transmit_FS("\r\n", 2);
 */
+}
@@ @@ -301,6 +287,7 @@ int16_t update_pid(uint16_t k_p, uint16_ @@
 uint32_t last_ssr_on = 0;
 uint32_t last_vcp_tx = 0;
 uint32_t last_led = 0;
 int32_t setpoint = 0;
 int16_t ssr_output = 0; // Duty cycle of ssr, 0 to SSR_PERIOD
@@ @@ -352,6 +339,18 @@ void process() @@
+    {
         HAL_GPIO_WritePin(SSR_PIN, 0);
+    }
     if(ticks - last_vcp_tx > VCP_TX_FREQ)
+    {
         // Print temp to cdc
         char tempstr[6];
         itoa_fp(temp, temp_frac, tempstr);
         while(CDC_Transmit_FS(tempstr, sizeof(tempstr)) == USBD_BUSY);
         while(CDC_Transmit_FS("\r\n", 2) == USBD_BUSY);
         last_vcp_tx = ticks;
+    }
+}
@@ @@ -536,7 +535,13 @@ void machine() @@
                         ssd1306_clearscreen();
                         ssd1306_DrawString("Entering Bootloader", 1, 0);
                         ssd1306_DrawString("(hopefully)", 2, 0);
                         HAL_Delay(1000);
                         //HAL_Delay(1000);
                         HAL_RCC_DeInit();
                         SysTick->CTRL = 0;
                         SysTick->LOAD = 0;
                         SysTick->VAL = 0;
                         __set_PRIMASK(1);
                         __set_MSP(0x200010000);
                         *((unsigned long *)0x200017F0) = 0xDEADBEEF; // 6KB STM32F042
                         NVIC_SystemReset();

startup_stm32f042x6.s

➞

Show inline comments

@@ @@ -84,15 +84,33 @@ Reset_Handler: @@
 /* Boot into bootloader */
 Reboot_Loader:
   ldr r0, =0x1FFFF6A6 /* Address of bootloader on f042 from CD00167594 pg 15 table 3 */
   /* This replaces ldr sp, [r0, #0] which doesn't work on m0 */
   // Set stack pointer
   ldr r1, [r0, #0]
   mov sp, r1
   LDR     R0, =0x40021018 // RCC_APB2ENR (+0x18)
   LDR     R1, =0x00000001 // ENABLE SYSCFG CLOCK
   STR     R1, [R0, #0]
   LDR     R0, =0x40010000 // SYSCFG_CFGR1 (+0x00)
   LDR     R1, =0x00000001 // MAP ROM AT ZERO
   STR     R1, [R0, #0]
   //                LDR     R0, =0x1FFFEC00 ; ROM BASE (STM32F03x)
   LDR     R0, =0x1FFFC400 // ROM BASE (STM32F04x)
   //                LDR     R0, =0x1FFFEC00 ; ROM BASE (STM32F05x)
   //                LDR     R0, =0x1FFFC800 ; ROM BASE (STM32F07x)
   //                LDR     R0, =0x1FFFD800 ; ROM BASE (STM32F09x)
   LDR     R1, [R0, #0]    // SP @ +0
   MOV     SP, R1
   LDR     R0, [R0, #4]    // PC @ +4
   BX      R0
   // On reset, SP=value at address 0x0
 //  ldr r0, =0x00000000
 //  ldr r0, [r0, #0]
 //  mov sp, r0
 //  ldr r0, =0x1FFFC800 /* Address of bootloader on f042 from CD00167594 pg 15 table 3 */
   // Branch to bootloader
   ldr r0, [r0, #4]
   bx r0
 //  ldr r0, [r0, #4]
 //  bx r0
 CopyDataInit:

usbd_cdc_if.c

➞

Show inline comments

@@ @@ -290,10 +290,13 @@ uint8_t CDC_Transmit_FS(uint8_t* Buf, ui @@
     /* USER CODE BEGIN 8 */
     uint16_t i;
     // Zero out user TX buffer (EMZ FIXME: why bother?)
     for (i=0; i < sizeof(UserTxBufferFS); i++) {
 	UserTxBufferFS[i] = 0;
+    }
     // Copy input buff to user TX buffer
     for (i=0; i < Len; i++) {
 	UserTxBufferFS[i] = Buf[i];
+    }

0 comments (0 inline, 0 general)