Files
@ 45ee045c249f
Branch filter:
Location: therm/drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_flash_ex.c
45ee045c249f
31.6 KiB
text/plain
Added checksum to flash write and restore functions and load default settings
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 | /**
******************************************************************************
* @file stm32f0xx_hal_flash_ex.c
* @author MCD Application Team
* @version V1.1.0
* @date 03-Oct-2014
* @brief Extended FLASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the FLASH peripheral:
* + Extended Initialization/de-initialization functions
* + Extended I/O operation functions
* + Extended Peripheral Control functions
* + Extended Peripheral State functions
*
@verbatim
==============================================================================
##### Flash peripheral extended features #####
==============================================================================
##### How to use this driver #####
==============================================================================
[..] This driver provides functions to configure and program the FLASH memory
of all STM32F0xxx devices. It includes
(+) Set/Reset the write protection
(+) Program the user Option Bytes
(+) Get the Read protection Level
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @defgroup FLASHEx FLASHEx Extended HAL module driver
* @brief FLASH Extended HAL module driver
* @{
*/
#ifdef HAL_FLASH_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup FLASHEx_Private_Constants FLASHEx Private Constants
* @{
*/
#define HAL_FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @addtogroup FLASHEx_Private_Variables FLASHEx Private Variables
* @{
*/
/* Variables used for Erase pages under interruption*/
extern FLASH_ProcessTypeDef pFlash;
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup FLASHEx_Private_Functions FLASHEx Private Functions
* @{
*/
/* Erase operations */
extern void FLASH_PageErase(uint32_t PageAddress);
static void FLASH_MassErase(void);
/* Option bytes control */
static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
static uint32_t FLASH_OB_GetWRP(void);
static FlagStatus FLASH_OB_GetRDP(void);
static uint8_t FLASH_OB_GetUser(void);
/**
* @}
*/
/** @defgroup FLASHEx_Extern_Functions FLASHEx Extern Functions
* @{
*/
/* Private functions ---------------------------------------------------------*/
extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
/**
* @}
*/
/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
* @{
*/
/** @defgroup FLASHEx_Exported_Functions_Group2 Extended I/O operation functions
* @brief Extended I/O operation functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Perform a mass erase or erase the specified FLASH memory pages
* @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
* The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
* @param[in] pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
* contains the configuration information for the erasing.
*
* @param[out] PageError: pointer to variable that
* contains the configuration information on faulty page in case of error
* (0xFFFFFFFF means that all the pages have been correctly erased)
*
* @retval HAL_StatusTypeDef HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError)
{
HAL_StatusTypeDef status = HAL_ERROR;
uint32_t address = 0;
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Check the parameters */
assert_param(IS_TYPEERASE(pEraseInit->TypeErase));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
if (status == HAL_OK)
{
if (pEraseInit->TypeErase == TYPEERASE_MASSERASE)
{
/*Mass erase to be done*/
FLASH_MassErase();
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Check FLASH End of Operation flag */
if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
{
/* Clear FLASH End of Operation pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
}
/* If the erase operation is completed, disable the MER Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
}
else
{
/* Check the parameters */
assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
/*Initialization of PageError variable*/
*PageError = 0xFFFFFFFF;
/* Erase by page by page to be done*/
for(address = pEraseInit->PageAddress;
address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE);
address += FLASH_PAGE_SIZE)
{
FLASH_PageErase(address);
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Check FLASH End of Operation flag */
if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
{
/* Clear FLASH End of Operation pending bit */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
}
/* If the erase operation is completed, disable the PER Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
if (status != HAL_OK)
{
/* In case of error, stop erase procedure and return the faulty address */
*PageError = address;
break;
}
}
}
}
/* Process Unlocked */
__HAL_UNLOCK(&pFlash);
return status;
}
/**
* @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled
* @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
* The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
* @param pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
* contains the configuration information for the erasing.
*
* @retval HAL_StatusTypeDef HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
{
HAL_StatusTypeDef status = HAL_OK;
/* Process Locked */
__HAL_LOCK(&pFlash);
/* Check the parameters */
assert_param(IS_TYPEERASE(pEraseInit->TypeErase));
/* Enable End of FLASH Operation and Error source interrupts */
__HAL_FLASH_ENABLE_IT((FLASH_IT_EOP | FLASH_IT_ERR));
if (pEraseInit->TypeErase == TYPEERASE_MASSERASE)
{
/*Mass erase to be done*/
pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
FLASH_MassErase();
}
else
{
/* Erase by page to be done*/
/* Check the parameters */
assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
pFlash.DataRemaining = pEraseInit->NbPages;
pFlash.Address = pEraseInit->PageAddress;
/*Erase 1st page and wait for IT*/
FLASH_PageErase(pEraseInit->PageAddress);
}
return status;
}
/**
* @}
*/
/** @defgroup FLASHEx_Exported_Functions_Group3 Extended Peripheral Control functions
* @brief Extended Peripheral Control functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to control the FLASH
memory operations.
@endverbatim
* @{
*/
/**
* @brief Erases the FLASH option bytes.
* @note This functions erases all option bytes except the Read protection (RDP).
* The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
* The function HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
* The function HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
* (system reset will occur)
* @retval HAL status
*/
HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
{
uint8_t rdptmp = OB_RDP_LEVEL_0;
HAL_StatusTypeDef status = HAL_ERROR;
FLASH_OBProgramInitTypeDef optionsbytes;
/* Get the actual read protection Option Byte value */
HAL_FLASHEx_OBGetConfig(&optionsbytes);
if(optionsbytes.RDPLevel != RESET)
{
rdptmp = OB_RDP_LEVEL_1;
}
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
if(status == HAL_OK)
{
/* If the previous operation is completed, proceed to erase the option bytes */
SET_BIT(FLASH->CR, FLASH_CR_OPTER);
SET_BIT(FLASH->CR, FLASH_CR_STRT);
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* If the erase operation is completed, disable the OPTER Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
if(status == HAL_OK)
{
/* Restore the last read protection Option Byte value */
optionsbytes.OptionType = OPTIONBYTE_RDP;
optionsbytes.RDPLevel = rdptmp;
status = HAL_FLASHEx_OBProgram(&optionsbytes);
}
}
/* Return the erase status */
return status;
}
/**
* @brief Program option bytes
* @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
* The function HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
* The function HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
* (system reset will occur)
*
* @param pOBInit: pointer to an FLASH_OBInitStruct structure that
* contains the configuration information for the programming.
*
* @retval HAL_StatusTypeDef HAL Status
*/
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
{
HAL_StatusTypeDef status = HAL_ERROR;
/* Check the parameters */
assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
/* Write protection configuration */
if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
{
assert_param(IS_WRPSTATE(pOBInit->WRPState));
if (pOBInit->WRPState == WRPSTATE_ENABLE)
{
/* Enable of Write protection on the selected page */
status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
}
else
{
/* Disable of Write protection on the selected page */
status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
}
}
/* Read protection configuration */
if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
{
status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
}
/* USER configuration */
if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
{
status = FLASH_OB_UserConfig(pOBInit->USERConfig);
}
/* DATA configuration*/
if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA)
{
status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
}
return status;
}
/**
* @brief Get the Option byte configuration
* @param pOBInit: pointer to an FLASH_OBInitStruct structure that
* contains the configuration information for the programming.
*
* @retval None
*/
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
{
pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER;
/*Get WRP*/
pOBInit->WRPPage = FLASH_OB_GetWRP();
/*Get RDP Level*/
pOBInit->RDPLevel = FLASH_OB_GetRDP();
/*Get USER*/
pOBInit->USERConfig = FLASH_OB_GetUser();
}
/**
* @}
*/
/**
* @}
*/
/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
* @{
*/
/**
* @brief Mass erase of FLASH memory
* @retval None
*/
static void FLASH_MassErase(void)
{
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
/* Proceed to erase all sectors */
SET_BIT(FLASH->CR, FLASH_CR_MER);
SET_BIT(FLASH->CR, FLASH_CR_STRT);
}
/**
* @brief Enable the write protection of the desired pages
* @note When the memory read protection level is selected (RDP level = 1),
* it is not possible to program or erase the flash page i if CortexM4
* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
*
* @param WriteProtectPage: specifies the page(s) to be write protected.
* The value of this parameter depend on device used within the same series
* @retval HAL status
*/
static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
{
HAL_StatusTypeDef status = HAL_OK;
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
uint16_t WRP0_Data = 0xFFFF;
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
uint16_t WRP1_Data = 0xFFFF;
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx */
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
/* Check the parameters */
assert_param(IS_OB_WRP(WriteProtectPage));
WriteProtectPage = (uint32_t)(~WriteProtectPage);
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8);
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx */
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8);
WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16);
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24);
#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
#if defined(STM32F091xC) || defined(STM32F098xx)
WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24);
#endif /* STM32F091xC || STM32F098xx */
#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
if(status == HAL_OK)
{
SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
if(WRP0_Data != 0xFF)
{
OB->WRP0 &= WRP0_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
if((status == HAL_OK) && (WRP1_Data != 0xFF))
{
OB->WRP1 &= WRP1_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx || STM32F071xB ||
STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
if((status == HAL_OK) && (WRP2_Data != 0xFF))
{
OB->WRP2 &= WRP2_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
if((status == HAL_OK) && (WRP3_Data != 0xFF))
{
OB->WRP3 &= WRP3_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
/* if the program operation is completed, disable the OPTPG Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
}
return status;
}
/**
* @brief Disable the write protection of the desired pages
* @note When the memory read protection level is selected (RDP level = 1),
* it is not possible to program or erase the flash page i if CortexM4
* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
*
* @param WriteProtectPage: specifies the page(s) to be write unprotected.
* The value of this parameter depend on device used within the same series
* @retval HAL status
*/
static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
{
HAL_StatusTypeDef status = HAL_OK;
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
uint16_t WRP0_Data = 0xFFFF;
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
uint16_t WRP1_Data = 0xFFFF;
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx */
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
/* Check the parameters */
assert_param(IS_OB_WRP(WriteProtectPage));
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8);
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx */
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8);
WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16);
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO63MASK) >> 24);
#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
#if defined(STM32F091xC) || defined(STM32F098xx)
WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24);
#endif /* STM32F091xC || STM32F098xx */
#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
if(status == HAL_OK)
{
SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
if(WRP0_Data != 0xFF)
{
OB->WRP0 |= WRP0_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
if((status == HAL_OK) && (WRP1_Data != 0xFF))
{
OB->WRP1 |= WRP1_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx || STM32F071xB ||
STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
if((status == HAL_OK) && (WRP2_Data != 0xFF))
{
OB->WRP2 |= WRP2_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
if((status == HAL_OK) && (WRP3_Data != 0xFF))
{
OB->WRP3 |= WRP3_Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
}
#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
/* if the program operation is completed, disable the OPTPG Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
}
return status;
}
/**
* @brief Set the read protection level.
* @param ReadProtectLevel: specifies the read protection level.
* This parameter can be one of the following values:
* @arg OB_RDP_LEVEL_0: No protection
* @arg OB_RDP_LEVEL_1: Read protection of the memory
* @arg OB_RDP_LEVEL_2: Full chip protection
*
* @note Warning: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
*
* @retval HAL status
*/
static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
if(status == HAL_OK)
{
/* Enable the Option Bytes Programming operation */
SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
WRITE_REG(OB->RDP, ReadProtectLevel);
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* if the program operation is completed, disable the OPTPG Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
}
return status;
}
/**
* @brief Program the FLASH User Option Byte.
* @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
* @param UserConfig: The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), BOOT1(Bit4),
* VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
* @retval HAL status
*/
static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
{
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_OB_WDG_SOURCE((UserConfig&OB_WDG_SW)));
assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
assert_param(IS_OB_VDDA_ANALOG((UserConfig&OB_VDDA_ANALOG_ON)));
assert_param(IS_OB_SRAM_PARITY((UserConfig&OB_RAM_PARITY_CHECK_RESET)));
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
assert_param(IS_OB_BOOT_SEL((UserConfig&OB_BOOT_SEL_SET)));
assert_param(IS_OB_BOOT0((UserConfig&OB_BOOT0_SET)));
#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
if(status == HAL_OK)
{
/* Enable the Option Bytes Programming operation */
SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
OB->USER = UserConfig;
#else
OB->USER = (UserConfig | 0x88);
#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* if the program operation is completed, disable the OPTPG Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
}
return status;
}
/**
* @brief Programs a half word at a specified Option Byte Data address.
* @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
* The function HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
* The function HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
* (system reset will occur)
* Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
* @param Address: specifies the address to be programmed.
* This parameter can be 0x1FFFF804 or 0x1FFFF806.
* @param Data: specifies the data to be programmed.
* @retval HAL status
*/
static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
{
HAL_StatusTypeDef status = HAL_ERROR;
/* Check the parameters */
assert_param(IS_OB_DATA_ADDRESS(Address));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* Clear pending flags (if any) */
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
if(status == HAL_OK)
{
/* Enables the Option Bytes Programming operation */
SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
*(__IO uint16_t*)Address = Data;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation((uint32_t)HAL_FLASH_TIMEOUT_VALUE);
/* If the program operation is completed, disable the OPTPG Bit */
CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
}
/* Return the Option Byte Data Program Status */
return status;
}
/**
* @brief Return the FLASH Write Protection Option Bytes value.
* @retval The FLASH Write Protection Option Bytes value
*/
static uint32_t FLASH_OB_GetWRP(void)
{
/* Return the FLASH write protection Register value */
return (uint32_t)(READ_REG(FLASH->WRPR));
}
/**
* @brief Returns the FLASH Read Protection level.
* @retval FLASH ReadOut Protection Status:
* - SET, when OB_RDP_Level_1 or OB_RDP_Level_2 is set
* - RESET, when OB_RDP_Level_0 is set
*/
static FlagStatus FLASH_OB_GetRDP(void)
{
FlagStatus readstatus = RESET;
if ((uint8_t)READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT1) != RESET)
{
readstatus = SET;
}
return readstatus;
}
/**
* @brief Return the FLASH User Option Byte value.
* @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), BOOT1(Bit4),
* VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
*/
static uint8_t FLASH_OB_GetUser(void)
{
/* Return the User Option Byte */
return (uint8_t)(READ_REG(FLASH->OBR) >> 8);
}
/**
* @}
*/
#endif /* HAL_FLASH_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|