Files @ e93bd62dcae4
Branch filter:

Location: therm/spi.c

Ethan Zonca
Fix RAM size

#include "stm32f0xx_hal_conf.h"
/*
void init_spi(SPI_HandleTypeDef* hspi1)
{
  
    
    hspi1->Instance = SPI1;
    hspi1->Init.Mode = SPI_MODE_MASTER;
    hspi1->Init.Direction = SPI_DIRECTION_2LINES;
    hspi1->Init.DataSize = SPI_DATASIZE_8BIT;
    hspi1->Init.CLKPolarity = SPI_POLARITY_LOW;
    hspi1->Init.CLKPhase = SPI_PHASE_1EDGE;
    hspi1->Init.NSS = SPI_NSS_SOFT;
    hspi1->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
    hspi1->Init.FirstBit = SPI_FIRSTBIT_MSB;
    hspi1->Init.TIMode = SPI_TIMODE_DISABLED;
    hspi1->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
    hspi1->Init.NSSPMode = SPI_NSS_PULSE_ENABLED;
    HAL_SPI_Init(hspi1);
}*/    
    
    /* OLD:
        SPI_InitTypeDef  SPI_InitStructure;

    // OLED IC
    SPI_Cmd(SPI1, DISABLE); 
    SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Tx;
    SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
    SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
    SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
    SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
    SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
    SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
    SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
    SPI_InitStructure.SPI_CRCPolynomial = 7;
    SPI_Init(SPI1, &SPI_InitStructure);
    SPI_Cmd(SPI1, ENABLE);          


    // MAX IC
    SPI_Cmd(SPI2, DISABLE); 
    SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
    SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
    SPI_InitStructure.SPI_DataSize = SPI_DataSize_16b; // Andysworkshop
    SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; // From andysworkshop
    SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; // same
    SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
    SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8;
    SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
    SPI_InitStructure.SPI_CRCPolynomial = 7;
    SPI_Init(SPI2, &SPI_InitStructure);
    SPI_Cmd(SPI2, ENABLE);          
    */

// vim:softtabstop=4 shiftwidth=4 expandtab